My initial 2010 F150 Raptor coat came out extra bumpy as my compressor couldn't keep the pressure up in the 70psi range. So I went out and bought urethane thinner and put in a 3/4 inch of it in the hardener cup and mixed it along with the hardener.. Came out way smoother more like a paint... Apparently you can put the Raptor containers in hot water as well to reduce texture/increase flow/coverage.
@ThePeca19883 жыл бұрын
Ecactly! I also had some polyurethane thinner at hand, but in the end for a finer texture my solution was to spray with an ordinary paint gun, without thinning up the Raptor, but i did it at about 6-7 BARs (~90-100psi), and it came out pretty good aswell. It took longer to spray, but i'm absolutely satisfied with the texture, and the paint gun coped with the thick material (what i thought it wouldnt do)
@rrr.1rr Жыл бұрын
Hello! Thank you for video😊 Could you tell me what size wheels are on your car?
@ThePeca1988 Жыл бұрын
Hey, you are welcome 🍻 its the factory size wheels, 31x10,5 tires on 8 inch wide wheels with an aggressive -35ET
@rrr.1rr Жыл бұрын
@@ThePeca1988 thank you!💪👍
@ДмитрийС-ч2ч3 жыл бұрын
Круто , своими руками !!! только отклеивание уже под кузов готовыми шаблонами или как ....??? Жирный ЛАЙК дядьке с ✋.
@ThePeca19883 жыл бұрын
Spasibo! Eto legko, prosto prinimayte prostyye resheniya, vam nuzhno tol'ko podgotovit' materialy i mashinu, i vy gotovy k rabote! vam ne nuzhna nikakaya drugaya podgotovka. Eto prostoy proyekt, no on trebuyet mnogo vremeni
@danielemercuri1268 Жыл бұрын
Che olio motore utilizzavi sul 2.3? Ciao e grazie 👍
@ThePeca1988 Жыл бұрын
5w30 🥂
@franckmuller58523 жыл бұрын
Beau travail !! Le mien vas recevoir du kakis et noir mat!! Vive les frontera !!
@ThePeca19883 жыл бұрын
Merci! Le noir mat est toujours un excellent choix !
@franckmuller58523 жыл бұрын
@@ThePeca1988 c’est clair puis au moindre accroc c’est facile à reprendre
@ThePeca19883 жыл бұрын
@@franckmuller5852 cela dépend où et comment vous peignez, j'ai ensuite poncé le mien avec du papier de verre grain 240 et l'ai poli avec du wd40. maintenant c'est beau et uniforme. le paquebot de raptor a ses bizarreries. il est difficile de pulvériser à l'extérieur sous la lumière directe du soleil
@itsNotmimiX10 ай бұрын
How much time did it take you to do whole process?
@ThePeca198810 ай бұрын
All in all it took about a week, doing 7-8 hours a day
@itsNotmimiX10 ай бұрын
@@ThePeca1988 Lovely job done, i would like to ask 1 more question, how much liters of raptor and primer it took? Asking cause i will propably do the same thing this year :D
@ThePeca198810 ай бұрын
@@itsNotmimiX awesome, its worth is, looks great with it!! If i remember correctly it took the whole set of raptor liner, as i sprayed it till there was no more to spray 😀 half of it would probably be enough for a full coverage though 😀
@xuliofc61462 жыл бұрын
what fins did you put on it?
@hassan-aljarjri2 жыл бұрын
Wow, very nice color. What color is that?
@ThePeca19882 жыл бұрын
Standard black raptor-liner, and glossy black hammerite on the bumpers