Love the video! Could we possibly see a video about different wheel sizes on the GT86/BRZ and how to get the best fitment and performance?
@FTspeed8 жыл бұрын
It's possible! I will add it to the list and see if we can get it done. Otherwise, contact us with questions! www.ft86speedfactory.com/contacts/
@Austinomon6 жыл бұрын
Loving these guides. Would it be possible for some guides on tires, best tires for the car in summer and winter, maybe even a guide on suspension that lifts the car for those of us who daily even in the winter?
@KaneDesigns8 жыл бұрын
Starting to like the new front on this year
@FTspeed8 жыл бұрын
Lots of people are starting to come around. We can't wait to get a lip kit on ours!
@lesrock60655 жыл бұрын
still gross
@LovensPresume8 жыл бұрын
... I need this car in my life !!
@soursea81328 жыл бұрын
Lovens Presume yes!!
@Louves1188 жыл бұрын
this video was great. the car looks amazing. great job guys
@forzanovitec4195 жыл бұрын
And bags? how you ajust i think is hard to install and it's expensive?
@dwayne76267 жыл бұрын
I would love to see a video on the new sliding armrest on your site. Thank you
@kvndela7 жыл бұрын
These videos are actually helpin me a lot with what I wanna do to my brz I'm not sure if you guys sell tires, but could you do a video for recommendations if you do. Preferably all season
@FTspeed7 жыл бұрын
That's great to hear. However we do not sell tires, but everything we do sell you can find on our website. www.ft86speedfactory.com/
@soursea81328 жыл бұрын
Omg this is so cool! Great job :)
@Lowside9257 жыл бұрын
Hey guys. It's "Damper" not "Dampener"
@FTspeed7 жыл бұрын
We noticed that after the video was done, easy to get them mixed up!
@PaddyMcQueen6 жыл бұрын
lowering your car with just stiff springs it's just not a good idea... you will destroy the natural balance of the car, which will become more nervous without gaining any handling quality at the limit. You just reduce the time of reaction needed to correct the car.
@brother_maleik3 жыл бұрын
Can a shop align the car correctly even without the alignment kit?
@cenosworld5 жыл бұрын
What spring rate do you run on the front and back?
@bigdrefromthebay64754 жыл бұрын
Help! My FRS bottoms out easily , and feels every bump on these SF roads ! Any solutions or suggestions?
@ScorpioPDX3 жыл бұрын
I want 18 x 9.5 wheels but not sure what offset will be best to clear my brembo brakes. Any suggestions?
@dutchberry Жыл бұрын
HKS Hipermax S is the best
@Spanky5.77 жыл бұрын
Idk if I should bag my car or put coilovers on it
@kaboom4864 жыл бұрын
is there a video on this cars build?
@_danieljr4 жыл бұрын
What coilovers should I get for titan7 ts5 wheels
@davidloh26062 жыл бұрын
Wanna asking your guys gt86 2016 car, drive until 130-140km speed will automatically turn to left side, or orignal abosober 86 suspension is soft so will become like that is normal , i just wanna make sure my car no problem, coz i just buy a recond car 86,who know can let me know izit normal or some other problem
@Naaanndo6 жыл бұрын
Does the camber plate also help with getting -0 camber on the wheels if I don't want it to be negative? And control arms are the only option to remove negative camber in the back?
@FTspeed6 жыл бұрын
Yes, the plates can be adjusting to add or remove camber. Control arms are the only item in the rear that will allow adjustment for camber.
@dopegaming33958 ай бұрын
So I have a 2017 brz and I’m still trying to learn and do everything myself. I want to get a set a coil overs that lower my car that can be used to enhance cornering but still provide a good base for putting down power because I plan to do much more to the engine later on. Any recommendations? Also I need a set a tyres that would then fit these coil overs, what would be a good set for something like my build.
@dopegaming33958 ай бұрын
Also I love your channel, you have some great videos and I have gotten my headers and fatback exhaust from you guys and they worked and still work great!
@dopegaming33958 ай бұрын
Catback*
@es35020128 жыл бұрын
What happened to Kevin from FT86 Speedfactory/subiespeed?????
@FTspeed8 жыл бұрын
He is mostly busy on the Subispeed side of things! He is still around :)
@eman08288 жыл бұрын
I hope I'm not the only Iowan besides you haha as I live like two hours from you in the 2nd largest city in the state. Another Toyota/Lexus fan just stopping by.
I dont plan on running negative camber in the rear, am I still going to need the adjustable toe arms if I'm only lowering the car?
@FTspeed7 жыл бұрын
The negative camber tucks the rear wheels in so we can fit the wider wheel and tire, without rubbing. If you want your car as low as ours, we'd recommend adjustable toe arms so your rear toe is properly aligned. If you have further questions, please shoot us an email. www.ft86speedfactory.com/contacts/
@Musicizmyremedy7 жыл бұрын
Should I stick with lowering springs if I'm just doing daily driving and spirited driving or should I go ahead and purchase quality coilovers? I think the stock suspension system is great already but I do wanna lower the car a little bit because I went from 17 to 18's
@FTspeed7 жыл бұрын
Springs are more than capable. Great way to get the drop and save some pennies!
@_R4eedd8 жыл бұрын
Song?
@haydendowling3385 жыл бұрын
Vindata - All I Really Need (Regulators Remix)
@oliviastone66366 жыл бұрын
With coilovers can you adjust the height back to stock height? I'm looking at buying an frs with coilovers but the car is too low for the pot holes on my dirt road, Is that adjustable?
@FTspeed6 жыл бұрын
Most coilover systems offered for this platform are physically smaller than OEM suspension. Even at max height, you would still be minimum 15mm lower than OEM ride height. Just the nature of the beast with coilovers.
@vacazboara5 жыл бұрын
How do you know your car is aligned? I mean, DIY.
@TheMadShredder7 жыл бұрын
these are 17x9 +40mm but what tires? can I get 255 40 17 with stock ride? or will I rub the struts
@FTspeed7 жыл бұрын
The tires we use on our car are 255/40/17 but that's with coilovers. If you plan to stay on stock struts we recommend a 17x9 +35 with 245/40/17 tires.
@FTspeed7 жыл бұрын
This video should also help you out kzbin.info/www/bejne/oWK3oHWIm9xqoNk
@TheMadShredder7 жыл бұрын
Ok thx! I saw that vid too! U recommend 245 because the inside of the tire will rub the top of the strut?
@FTspeed7 жыл бұрын
Correct
@marc-andrecharbonneau43546 жыл бұрын
part list on the beautiful grey 86 ? Suspension/wheels wise
@iSynck7 жыл бұрын
Would lowering springs be good enough if I am going with 18s and just daily driving the car?
@JJ_ExMachina7 жыл бұрын
I know this is 5 months late... but some info for you. I have been running the Eibach Sportline lowering springs with factory struts, for 100K+ miles on my car with out a single issue. I installed them myself, and had a shop check alignment. The factory wheels were a bit to small so the car scrapped on speed bumps a bit too much. However once I had finally made a choice on what 18" wheels I wanted, the scrapping stopped and the car looks awesome. The ride quality is a bit stiffer then the factory abut nothing that upsets the car at highway speeds. The car is a DD and will never see track days.
@MikeJones-in3uk6 жыл бұрын
I love my automatic 86 . However, it s a little "tail happy" . When I take hard corner, I would like to make it more "planted" and less "tail happy" . What SLIGHT modification can I do to the car . Thank you.
@jorgegomez64727 жыл бұрын
This might sound stupid but will frs coilovers fit the new gt86 I need to know before I buy some
@FTspeed7 жыл бұрын
Yes, they are the same for the refresh model!
@judebayangos42827 жыл бұрын
FT86SpeedFactory what brand is that?
@FTspeed7 жыл бұрын
We went with Prime Suspension which is made by Fortune Auto. www.ft86speedfactory.com/prime-suspension-series-coilover-by-fortune-auto-2013-ft86.html#.WCxjGy0rKrw
@kennethinocencio205 жыл бұрын
Wheel specs?
@salazjua0017 жыл бұрын
would i be able to run coilovers on a 255 45 17 wheel fitment to get a semi flush look on my car.
@FTspeed7 жыл бұрын
255/45 is a bit tall. We would recommend 255/40/17.
@salazjua0017 жыл бұрын
FT86SpeedFactory yeah sorry thats the size tire im running. im running springs but looking to upgrade to coilovers but my question is well this size tire rub to much on them
@justinnguyen30917 жыл бұрын
It's all dependent on how high or low you set the coilovers. They're adjustable. You can make coilovers taller than stock so you can guarantee you won't rub. I say get 255/35/17s for a good street look unless you live in a terrible area with terrible roads then I'd say 40s. But as long as you got a decent set of rims you can probably do 35s in most places and get away with it.
@matthew_cramer5 жыл бұрын
Need something that can handle a road In Wisconsin 😂
@SmartedPAnda6 жыл бұрын
Velox = Verus now
@Angel-HC6 жыл бұрын
*Damping
@viasevenvai7 жыл бұрын
If you plan on being with a girl for more than a few years realize she is going to hate your car.
@JJ_ExMachina7 жыл бұрын
Sorry to hear that... but my wife mods her vehicles just as much as I do. She has even installed her own brakes and a bunch of other little things. SO a blanketed statement like that is not even close to being true. Heck my wife is just as big of a gear head as I am, she just told me the other day, she is getting a turbo upgrade on her car :P
@pwnzlikeme6 жыл бұрын
MasterMech77 thays pretty uncommon. I wish my girlfriend liked cars at evem half the level i do. Would make builds much easier and much more fun :)