Fuel pump removal F800R

2010 F800R, fuel pump removal and reinstallation.
Fuel pressure should be between 2.5 and 5.0 bar.
The fuel filter model is KL315.

[@jangeloen4591]

thank you for the clear instructions

[@eldavo9030]

Muchas gracias por compartir tus conocimientos

[@Roy_Godiksen]

❤❤❤

[@dl5733]

👍

[@germaness]

another adventure in the garage =P always a pleasure to watch your videos... btw do you fill 95 or 98 ?

[@femalegarage]

It's been very adventurous lately, but I can't film everything. I fill 95, I don't think that 98 would do any better. Did you have issues with your steering damper? Mine is leaking.

[@germaness]

​@@femalegarage ohh Hi! I didn't realize you had replied. well, upon your video I started filling 98 but due to fuel price fluctuation and riding style, i still can't see much differences. I do keep record on every refuel, using an app called "fuelio" but again.. can't see significant difference. Apparently my avg consumption is 4.35l/100km. I did service the whole front suspension last winter, because I needed to change the steering head bearings, on shock had started to leak just a little and the steering damper as well, not too much but I thought it was better to do it already. I found that the internal seal/filter or whatever that foam ring is inside the steering damper had been disolved halfway. So I replaced that foam ring with two O-rings which were thick enough to make a bit tight travel and that worked very well. I used 10W on the steering damper just like on the shocks. It's working all just fine :) Hope to hear from you soon!