Full set / Juego completo OPEL ASTRA H 1.4 Z14XEP .

[@wolfgangk751]

Very useful and detailed described! Top Work! Best HowTo I' ve seen so far.

[@AjusaAutomotive]

Hi! Thanks for your comment. You can find more information in our Facebook facebook.com/AjusaSpain/ and in your Twitter twitter.com/Ajusa_Spain. Best regards

[@wolfgangk751]

Ajusa Thanks, I just add your site at Facebook. Are you also present on Instagram?

[@AjusaAutomotive]

Yes! This is the link: instagram.com/ajusaspain/. Best Regards.

[@michaelknecht4640]

Die beste Erklärung aller Zeiten👍👍👍👍👍👍👍👍👍👍👍👍👌👌👌👌👌👌

[@AjusaAutomotive]

Hallo! Danke für deinen Kommentar. 👍 facebook.com/AjusaSpain

[@rjshhooba9857]

nice work, there is something you forgot to show, 22:14, there is a pipe coming out of the carter ventilation, what did you do with it?

[@AjusaAutomotive]

Hi! There are some gaskets that we did not show due to poor installation view to record it, but that does not indicate that we did not assemble the correct gasket. Sincerely 🖥️ facebook.com/AjusaSpain 📸 instagram.com/ajusa_automotive/

[@rjshhooba9857]

@@AjusaAutomotive okay, what does the pipe do?

[@blitzgameplay007]

Thank you for an excellent video. :-) After applying Ajusil 14:05, how many hours should pass before starting the engine?

[@AjusaAutomotive]

Hi Blitz! Thanks for your comment! Our product reaches the total curing after 18 hours, so you must wait that time before starting the engine. Best Regards Follow us facebook.com/AjusaSpain

[@Schumaher7305]

Hi, what is the diference at 1.4 Z14XEL vs Z14XEP ?

[@AjusaAutomotive]

Hi! The main difference is the power output, but both install the same gaskets. Z14XEL: 55 kW (75 hp) a 5200 120 Nm a 3800 Z14XEP: 66 kW (90 hp) a 5600 125 Nm a 4000 Best regards

[@DNV970Raze]

Hi, does this engine have a PCV valve or diaphram? Does it have any PCV system at all? I have been looking for ages but didn't find any info about it. My engine has very high oil consumption and I think part of it might because of it. Hope you can answer my question. Great video btw!😊

[@AjusaAutomotive]

Yes, your vehicle has pcv valve in the rear of the engine. Kind regards 🌐 www.ajusa.es 🖥️ facebook.com/AjusaSpain 📸 instagram.com/ajusa_automotive/

[@DNV970Raze]

@@AjusaAutomotive Is it located on the intake manifold? Connected to the secondary PCV line on the valve cover?

[@AjusaAutomotive]

@@DNV970Raze Exactly. Best regards

[@unomoarecare7194]

Salut . La ce cuplu ați strîns șuruburile de la întinzător ? Merci.

[@AjusaAutomotive]

Hi! 8Nm. Best regards 🖥️ facebook.com/AjusaSpain 📸 instagram.com/ajusa_automotive/

[@sara78130]

allways doing best job and best vids

[@AjusaAutomotive]

Thank you very much!! Best regards

[@CroIntr00X]

so professional, wish like more mechanics work same as you do...matching required screw angle values and Nm..just amazing

[@AjusaAutomotive]

Really thanks for your comment!!

[@jagnandansingh7284]

xuv Mahendra

[@AjusaAutomotive]

We do not understand your comment. Please , what is your question?

[@TheTrollSquad]

what can i use instead of that tool in 3:57?

[@AjusaAutomotive]

Hello! In this case, we always recommend being used that valve steam installation tool, because it prevents possible damage on the head of the seal and will ensure a correct insert in the cylinder head. In the next link, you can find an example of this kit on internet: www.amazon.es/Timbertech-herramienta-retenes-v%C3%A1lvulas-adaptadores/dp/B011LD2Y5I. You can find more information about AJUSA in our Facebook: facebook.com/AjusaSpain and in our twitter: twitter.com/Ajusa_Spain. Best Regards

[@carlitoscardona2425]

why in the all videos that person not using any type of glue or silicone to sill the cover of blockhead, or is not necessary to use any glue in any surface ???? because I always use silicone to sill something

[@AjusaAutomotive]

Hi! We repair every engine following the OEM manufaturer instructions. Silicone sealant use is only recommended in some areas that are indicated in the original warehouse manual. Thanks for your comment and best regards.

[@ukaszkarpik3476]

What kind of liquid is applying betwen the camshaft and head 12:08 ? Can i apply standard 5W30 engine oil? Can you explaxin what happens between 19:10 to 20:02 ? After the block of the the timing system and crankshaft you installed the tool for registration of the camshaft position sensor disc. Then you tightened the both camshaft bolts by 1Kpm initially. After the registration tool and all blockades are removed, you tightened the bolts finally by 5Kpm. Then screws were tightened for 60 degrees angle. As we can see, the sensor disc is rotating in this step, but in the next step the position of sensor is correct. I see some discrepancy between these steps. Anyway, really good and detailed tutorial!

[@AjusaAutomotive]

Hi Lukask! Thank you for trusting AJUSA. We will answer your question shortly. Best Regards

[@AjusaAutomotive]

This liquid is mechanical assembly oil. Yes, you can apply standard engine oil. Between 19:10 and 20:02, we apply the torque and angular tightening to the camshaft bolts in the following sequence, 1kpm / 5kpm + 60 degrees. After that, we turn the crankshaft 2 turns and we put the synchronization tools to check the moment of the belt. You are right, keep in mind that sometimes it is necessary to record at a different time than the right assembly . You can find more information in our Facebook facebook.com/AjusaSpain/ and in your Twitter twitter.com/Ajusa_Spain. Best regards

[@Vladimir_Saf]

Я восхищен! В России есть ваши представительства?

[@AjusaAutomotive]

Привет! Вы можете связаться с нашей делегацией в России здесь: 108803, Москва, п. Воскресенское, пос. Воскресенское, д. 66, а/я 1890 Тел. [phone] Контакты: [e-mail] www.ajusa.ru Приветствие

[@jacitdm]

8:10 🙆🤦

[@MrAndrew199]

masterpiece

[@AjusaAutomotive]

Thanks for your comment!

[@БаходирХалбаев-б3э]

Здравствуйте помогите мне не найти Шатун на опель мерива 2008 1,4

[@БаходирХалбаев-б3э]

Где можно купить Шатун на опель мерива 2008 1,4

[@AjusaAutomotive]

@@БаходирХалбаев-б3э К сожалению, мы не производим моторные шатуны. поздравления

[@yo_yoyo_yo8294]

kzbin.info/www/bejne/q4PQmGyYZ812g5o -YOU can tell me why it sound like this my engine? Thank’s

[@gabrielemancuso2219]

che senso ha questo video se non mettete il serraggio dei perni?

[@AjusaAutomotive]

Hi Gabriele! Per favore, puoi dirci quali viti abbiamo lasciato allentate? Un saluto Please, can you tell us which bolts we left loose? A greeting 🖥️ facebook.com/AjusaSpain 📸 instagram.com/ajusa_automotive/

[@gabrielemancuso2219]

@@AjusaAutomotive non intendevo dire che avete lasciato delle viti lente ,ma almeno dire la coppia di serraggio

[@AjusaAutomotive]

@@gabrielemancuso2219 Di che coppia hai bisogno? Dicci e te lo invieremo. Salut What torque do you need? Tell us and we will send it to you. A greeting

[@mithatpushaka7143]

po