[FULL VIDEO] Hondata FlashPro: Knock Control | Evans Performance Academy

[@BulliKid]

Do you add the timing limit after you tune the main spark map on the dyno?

[@EJ2BSeries]

Awesome guide

[@MrTDM09]

Jeff you're a BOSS man.

[@mondecruel1866]

if your knock level voltage is way under and not crossing the knock threshold what can adds you a knock count ?

[@keltfix9131]

Привет дорогой друг. Скажи пожалуйста как ты делаешь новые графики graph templates?? Я пытаюсь сделать но ничего не получается. Или надо на подключеном компьютере к автомобилю. Я без хондаты пробую и ничего не получается. Заранее спасибо вам

[@RcaFastPrint]

Am not getting any knock count at all but the light keep popping up P0325. Yes the sensor is ok I try like 4 of them and yes the wiring good o ohms and test from ECU end to knock sensor still no knock and light keep popping up. #Hondata FlashPro 8Gen Civic Si

[@dylandominic]

I'm getting insane amounts of knock counts about 60 per 3rd gear pull to redline and it's mainly cylinders 1,2 and 3. Cylinder 4 seems to be getting actual knocks

[@enhancedphysique6452]

Junk it then pal😂🎉

[@repingers9777]

​@@enhancedphysique6452my civic si k20 knocks all the time with high count and knock control for a year driven every day with 170k miles and it seems ok? 😂😅

[@enhancedphysique6452]

Hahaha. Still going?? Bahahahaha

[@enhancedphysique6452]

@@repingers9777 an don't forget she is a Honda . She will take it.

[@repingers9777]

@@enhancedphysique6452 well i think the way its measured and detects it is weird. But when i reflash it the car feels twice as powerful compared to running it for a month and its slower

[@BulliKid]

My car registers 5 knock count at idle?!? Why? Noise? My cylinder 3 has the most knock counts. I swapped the sparks plugs and still cylinder 3 has the higher knock counts compared to the their cylinders.

[@9thgensi137]

Hey, how cut I cut my ignition on flashpro for pop and crackle on my 9th gen si?

[@GamerzCove]

Never do a crackle tune

[@Boostlee]

man i i love you no homo. this seriously helped me a lot

[@heaven4Now26]

You like that arms eh.

[@yardman0001]

If i drive my RSX for 30 mins i see 9 or so knocks reported on my ktuner ecu, is that ok or safe? I notice the knock appear when i lug the engine in too high of a gear example 4th gear at 20 mph. Also my knock sensor broke and it's disabled, I thought that would stop it from reporting knock to begin with. The car is tuned by a prominent tuner here in South FL.

[@Kenneth1350]

Wondering the same i put my Si in 4th gear and lug it alittle bit shows small knocks nothing crazy.

[@EvansPerformanceAcademy]

If the knock sensor is broken and disabled its impossible for it to register knock. That is a software issue that should be addressed by the software developer. Hondata does not have that problem if the knock sensor is disabled.

[@redcivicsiguy9507]

The only problem is ktuner doesn't give a shit about the older generations anymore. Really makes me mad and wish I would of bought hondata

[@ericmoney9734]

You'll get knock counts. What you don't want is consistent knocks back to back.

[@redcivicsiguy9507]

@@ericmoney9734 I get knocks consistently when off the throttle going down hill

[@anrichlucas9425]

A bit slow here, hope someone can clarify. MBT + KIL - (K.Control * K.Retard) 21 + 60 - (0.55 * 10) 81 - 5.5 = 75.5° ignition timing? That doesn't seem right.

[@FroztiProductions]

S300, no knock sensor 😭