Building a Ford Barra turbo engine - Project NOMANG Ep16 | fullBOOST

[@CRFLAus]

Some people like women whispering ASMR for relaxation, I like watching engines being put together. Thanks Fullboost!

[@TheCuttz1984]

Same. Every builder does stuff a little different. It's almost a signature

[@mcgregor711]

That's badass the way you put the rings on. Thank you.

[@adamhardacre7431]

O8

[@mattw1393]

No one will ever see these rods again. That’s confidence. 😏

[@Wtrxprs007able]

"Where there's a wog, there's a way" Nothing truer has ever been spoken

[@shanefinnerty5087]

Came here for the build, left with Ministry Of Sound: The Annual II. This counts as a win 👌❤️❤️👍

[@68mustangmustang77]

The t shirt is gold🤣👍

[@stringybarkin]

Love the ring fitting technique!

[@ChristopherHallett]

Gotta love these 3JZ donks, proper good bits of kit.

[@freestyla101]

100% George had a VL turbo

[@lancecooper4646]

kzbin.info/www/bejne/bmLEiHqbpc-JrM0

[@2304-x3s]

Yeah fa real cuz (lebo accent)

[@ChristopherHallett]

A Lebanese Lambo? I thought George was Greek?

[@freestyla101]

@@ChristopherHallett he is but I don’t think that would have stopped him back in the day. Ministry of sound tape says it all.

[@ChristopherHallett]

@@freestyla101 Nick Skitz Skitzmix is more the Lebanese style than MOS Annuals, yeah?

[@fentonroffey6911]

Great video guys, Michael @ Dominator is such a legend good to see you guys using his stuff.

[@Doc_in_the_carpet_truck]

That was sick George you are a mad man with the Nomang!!!🍻👍

[@eriqrosado3337]

Fuck I miss the good old days of mix tapes and getting live music on a tape. We never had to deal with tapes skipping.

[@arronjohnston742]

next time on project no mang, fully fabbed 9 inch an tubs........ hahaha .......... awesome stuff yet again boys, this thing is going to be a beast ....

[@sparkyexe]

Great stuff guys, love the natural conversation and banter in this one!

[@fullboost]

George gets stuck into building the new Ford Barra turbo engine for our Project NOMANG Holden Commodore. Special thanks to Dominator Motorsports Australia. *Get your track gear! 👉 **shop.fullboost.com.au* | If you’d like to be notified every time we upload a video, subscribe and then click the bell icon 🔔 next to the subscription button.

[@wobblysauce]

Remember having a big Ministry of Sound sticker over the back window. Looking from the outside you would think it would be a solid blind spot.

[@robertphillips3078]

Gr8 2 👀👀 a crank case girdle . Dont come across them 2 often . Xcellent

[@bluebird8004]

Oooh, that ring fitting technique 👌

[@shelbywoww5510]

Good job boys you learn heaps from George

[@7071t6]

lol still have the metal tape version and you can still buy them as well from TDK, used to listen to tapped music from my CD player in the VK Calais driving to see all the brocky's sitting at the car dealerships in Campbellfield, lol :)

[@joshuawatson9486]

Awesome as always boys

[@Zavierboulus9042]

The next motorrrr hahahah George is solid .. cheers full boost

[@hestermofet2722]

keep it up guys. ps the backing tracks are A+

[@infinitemonkeycage3010]

Man I even remember that brand of cassette. 2SER FM baby hahahaha

[@christopherlawrence-ul7fo]

Love your work brother recently brought a Fg barra XR6T work car new to the barra an fuck me completely stock and wow

[@benjaminbuffin9812]

Benjamin Buffin ❤️‘s Fullboost

[@BigPermGarage]

The future is Barra based sounds so much better than electric based

[@nepntzerZer]

Yeah but ev's are bullshit fast with insane torque. Not as fun though, and we are yet to see modding communities do stuff to them.

[@krispykruzer]

I hope to see a Torque Bench Episode about the comments in this Barra build...I already see one comment about a dude suggesting conversion to diesel. Lol

[@fullboost]

We have a backup diesel Barra in the build atm :P

[@krispykruzer]

@@fullboost lol, thought of everything

[@motoxray]

@@fullboost Nooooooooo! Leave it for 4wd's R us, Rolling coal etc., guys, Pleeez!!

[@bluespig1]

Luke's face @0:07 like a proud father.

[@ChristopherHallett]

I've got the first few Ministry Of Sound Annuals on CD somewhere.

[@brendo7363]

The time has come And so have I

[@levi-hi8og]

hey there! just wondering if u were able to do a series where u do a step by step on how to build a Barra, would love to learn!! Or where you would recommend me to go to learn how to engine build :) Thanks

[@nicholassteel5529]

Cool!👍

[@UPINSMOKEAUS]

I want that barra the future shirt 😂, anyone else?

[@7071t6]

WFT lets use a allen key to do up or put in the studs, is this a mechanics workshop or a set, lol, where the T handles and the other good tools to be used when building a engine? Can wait to see just how much she makes at the hub dyno+ at the track as well, maybe low 9's is my guess after all its about putting the power down and gears to suit?

[@ChristopherHallett]

Lmao t-handles are for dirtbikes.

[@7071t6]

maybe do a photo shoot in lygon st Melbourne, to suit that 1980's theme, lol :)

[@b_for_brett]

Greek workshop you say? I didn’t see a bottle of Windex anywhere!

[@TheHayruss]

I know its been 9 months o so since you released the video but just wondering if you replaced the valve springs and if you used the original cam gears? Cheers H

[@happydaze4213]

What machine work did you get done? I’m at the point of getting it machined but I’m unsure of what I need done.dandy engines are close by, so I know where I’ll be going to get the work done

[@GTX3584XE]

wasnt the car was up forsale?!?!!?!?

[@Antmac75]

Pretty sure you fitted the girdle upside down. There will be one teardrop shaped recess which will fit over the one cap that has that shape. The girdle will sit down on the caps not flat across the top how you have it

[@proflowfab]

Yeah we sorted that.

[@anthonycavalliotis8736]

What about the windage tray?

[@daneprostamo-brown6552]

@8:31 fark me that was smoother than the mixing in ministry of sound annual 2 95'

[@nepntzerZer]

Would be good to know total costing for this stuff. It's a very similar approach I want to take.

[@Rhubarb237]

No need to refit the windage tray over the girdle?

[@7071t6]

Still have not seen anything which is as good in engineering as the new LT6 corvette engine, with oil squitters, which is what the Barra needs to cool the engine plus get hi tempo ceramic coatings in all moving parts which has the most friction, that way the engine will last even longer, but still maintain the right oil temps with extra cooling of the oil, after all its going to be a drag engine, but still can dive it for the drag challenge when it comes around soon ?

[@ChristopherHallett]

So you've never taken any other modern engines apart, then?

[@mg74xbgt]

Just thought I'd ask you guys if you've ever heard of anyone JUST running upgraded Intake Valve springs , as I'm just using the stock cams and Boost pressure is only on the Intake Valves , not on the exhaust valves . ??????

[@MaddyBee]

Keeping vvt with the new cams?

[@fullboost]

Yep.

[@MaddyBee]

@@fullboost that’s awesome!

[@harrysfakianakis9077]

I wasn’t sure if I heard correctly was that a stock crank?

[@fullboost]

Yes they are very good.

[@WeLoveCommodores]

👌👌👌👌👌

[@davidt3196]

So George. I love this series and where can I get the t shirt?

[@proflowfab]

They're available on our website

[@davidt3196]

@@proflowfab Awesome. Thanks mate.

[@Jake_Hamlin]

What kinda ring gap? and what's the psi that turbo will be pushing?

[@punker844]

Not bad for 2k.

[@craigmandall9420]

I'd love to know how much that engine is worth

[@stevenbrown5695]

No gapless rings?

[@stevenbrown5695]

Looks like a Lotus 907

[@edwardthayer9386]

👑

[@mandingo9594]

Did George own a vl back in the day?😂

[@corporalpunishment1133]

What sort of max power should you expect from this type of build up. Like you guys said entry level build but is that enough for 1000hp.

[@ufowraith]

What happened to the green top. Did it grenade it's self 🤔

[@fullboost]

This engine in this video, it was pulled apart a long long time ago...timeline online don't always match up with real life :)

[@mazdagine]

What is a bottom end like that work out $$$ wise,

[@paule4204]

About $2k for a barra. :)

[@joshhall35]

Whens the next episode guys? Hangin!

[@thenightangel6533]

I'm surprised Ford hasn't run out of 6065a head bolts and door handles

[@1993kawasaki]

you guys should put the new Garrett G45 onto this build & watch it make 1200HP

[@Jake_Hamlin]

Asking for snapped crank?

[@paule4204]

RB40 or 3JZ? Wait for it.........

[@lsdontimpress]

Aussie rb40 💪

[@ReeceizMaChiNe]

Did you guys not change the NA valves? I heard they weren't that good

[@G42J3T]

Where's part 2?

[@peterstone172]

Is it possible to covert a barra to run on diesel? Different cylinder head.. someone should do that..

[@nordic5490]

Why would you run diesel ? E85 has great cooling properties that help protect the engine at high boost. A factory cast Barra block and head can make 2500hp on methanol.

[@lancecooper4646]

That'd actually be farken funny, cos they run em on just about every fuel BUT diesel. ...it would certainly add to the "Barra Legend" status.....

[@Jake_Hamlin]

@@nordic5490 stock crank cant tho

[@rossbritton4008]

No way was that crank.004th out of round from factory..The bearings don't have that much clearance, and it wouldn't be able to rotate..As for the rings, they are File Back rings, they are made with no gap..!

[@ROLFCOPTERZZ]

Feel free to donate this engine to me when you build the "next one"

[@FrankF6X]

What gap are you setting rings at For what psi you running

[@ndog1234765]

I'm guessing probably 6 to 7 thousandths per inch of bore, so like 22 to 25 thousandths (if stock bore)

[@slws14]

Are those conrods from Kmart ?

[@G42J3T]

Have you mentioned the budget or cost of the engine?

[@fullboost]

I believe it was around the 2k mark ☺️ we'll work it all out in a later video 👍

[@ChristopherHallett]

Everyone knows you can run 7s for $700 with a Barra, so this must be less than that...

[@chrisgriffin3374]

I thought the barra engine was a deep skirted block for strength.....what the hell aussies???🤘💀

[@A_lesson_in_Hate]

The sump is part of the support with bolts not the block

[@j.osborne4914]

Shouldnt you be doing your ring gaps before you put the crank in? Your putting dirty parts in a clean engine...?

[@grecoconduris6716]

Only nice Barra I have heard is that AdamLZ guys GT350

[@chevydyall7619]

Don't rely on big buildings mate. Ub, or I beam is just because of height. A us is what you'd call h beam is just because its cheaper and easy. So not a fair assessment.

[@Sir.VicsMasher]

I would do the much stronger 4r200 hub conversion into the 6r80 from Jake at Power by the Hour.

[@proflowfab]

We wanted to but the trans controller can't run it as a 4 speed and neither can the standard software

[@Sir.VicsMasher]

@@proflowfab Its best when ran as a 3 speed.

[@proflowfab]

@@Sir.VicsMasher if we had the electronics to do it I would.

[@Sir.VicsMasher]

@@proflowfab I thought Motec had 6r80 capabilities.

[@aaronskylark8818]

Explan ho wont stoofa engage stoofa bod ov karz

[@michaelcarydakis790]

i use Atomick gear better

[@kiwimodz]

ford engine in a holden 🤣 how embarrassing

[@nick-yc6ww]

Making it better whats embarrassing about that

[@nordic5490]

Ozzie engine in an Ozzie car ? All good

[@kryptux2463]

Takes bad sounding engine out. Swaps to equally Terrible sounding engine.

[@nordic5490]

The sound of an i6 is the sound of balance. A 90deg v8 sounds like a truck engine.

[@paulcoote3094]

Why does george keep cutting in and talking over the top. He needs to shut his mouth for 2 seconds

[@freestyla101]

Maybe it’s because he’s essentially being interviewed.

[@brendo7363]

Sigma dominance.

[@berternieartist]

There's always a stupid comment from the peanut gallery.

[@Jake_Hamlin]

@@berternieartist to be fair theres atleast 4 times george literally talks over him, which is alright considering hes doing all the work but it does get kinda annoying

[@turbotrana]

Yeh, George carries on but was silent on specs, cuts rings but then keeps mouth shut on ring gaps. At least George showed a different way to put rings on and some head torque specs.

[@Snake.br549]

that's how I do my rings exactly

[@Snake.br549]

I bet you didn't know a 49 Jaguar 6-cylinder has aluminum rods from the factory !