Building a $12,000 Engine | ASMR

[@WillemVerb]

The talent in both the engine building and filmmaking aspects of this are mind blowing

[@ukaszkwiecinski1781]

there's so much stuff wrong in this video.... he's not very "talented" in building engines.

[@ChiefJrod]

@@ukaszkwiecinski1781 And who are you sir?

[@ukaszkwiecinski1781]

@@ChiefJrod i have my own shop and have 30 years of experience as a mechanic.

[@zuten88]

​@@ukaszkwiecinski1781 I see nothing wrong here.. He measured all the things to the specs..

[@deanmonroe00]

@@ukaszkwiecinski1781your top playlist on your channel is “Forza Horizon 4 money glitch”. You’re literally 15.😂 “30 years experience”.😂😂😂

[@css172]

That engine is a work of art. Sick video / engine build.

[@Fullblast1515]

❤❤😂😂🎉🎉😢😢😮😮😅😅😊 ❤😂t😢😢 ❤😊😮😢🎉🎉😂❤😂 🎉🎉❤😂😂😂😂😂😂

[@RyderSchäfer2002]

I love building engines, grew up doing it with my dad, the most tedious but relaxing thing ever.

[@ron1-l7r]

You are watching a master at work! Not only in assembling the motor but the attention to detail in the video quality. All the experience throughout all these years. Devin you definitely deserve more subs. 👍

[@ukaszkwiecinski1781]

he built it so bad... he ain't no master

[@G3ck07]

@@ukaszkwiecinski1781 could you explain how he built it bad? I am confused as I've seen you on other comments saying he built it bad but not explaining

[@viigaalapati9796]

@@G3ck07 hes just a hater

[@park0rdie]

Cheaper to watch you build a motor then me do one hahah. Satisfy 👍

[@caponecashfunds]

I liked the purple valve cover over the bronze but that manifold looks sick! ☑

[@Tubelly]

Agreed, I really liked the purple accents

[@MitchDore]

Devin deserves every ounce of his success

[@igorrapalyuk2448]

Man, this is sooo esthetically satisfying

[@adidasman12]

Love when there aren't any words. Not necessary.

[@Rob-tw8iq]

Devin, put the stock intake manifold back on. You won’t regret it! It flows incredibly well and you may lose power without it. I have been through enough setups to know. 800-1000whp no issues for peak power up top using the stock intake manifold.

[@grandmasterstretch9471]

So freaking satisfying

[@SinisterVdub]

This video was mesmerizing! I'm not into ASMR, now i believe I haven't been because I haven't found the right content. This was amazing Dev. Great Job, makes me feel better that I knew every single step from having learned how on this channel. Thank you!

[@flergblerg]

doing this in silence is absurd, love it lol

[@padsquad]

i went from watching a video of someone rebuild an engine in the middle of nowhere with basic tools in the dirt to this. Both master mechanics.

[@user-kb9uc8vs1t]

Hey Devin As a consistent follower and subscriber of your channel for many years. Forgot the year lol. Do remember it wass your dads shop with a subi. Think it wass the forester. Since the red evo x build that after jarred drove or still hass in his fleed im a true member in your YT carreer. I still love your content but think there is much more improvement for you to get out your channel. I personal would like to see more cars driven content on your channel. You have a real serious fleet of amazing cars sitting in storage. Your popularity can make as i belief in. A huge boost by creating more real car driving content in general. I will give an example. do you know DDE (Daily Driven Exotics)? They are huge now like in same period as i follow you. You have the cars and equipment. Please use that for future fun and entertaining content mate. You will serious make me happy with that and i think alot other followers too. Its a writhen rule to know your specific knowledge on the builds lol it only gets a little boring to me as i speak and hope to many others. Its an advice and a hope. Its your decision at the end Hope my words make a little push in any positive direction Keep up your great work your doing well

[@zuten88]

Yep.. I think Devin is just too obsessed with building..

[@spencerharrison-jackson8211]

i shed a tear watching this beautiful work of art, if that engine could it would be smiling!

[@WhiteKnight199]

man idk if these are your most watched videos or not but they are great

[@demarcusedwards4753]

🔥🔥 can’t wait to here it running keep doing your thing on these cars

[@goatsg7]

Honestly 12k don’t seem all that bad, looks like an awesome build

[@jbalogh01]

Prep is so much work. Check and recheck everything. Record everything.

[@angelbruno6556]

Watching your Asmr videos before going to sleep knocks me out bro. 😂

[@albertojuarez-b1h]

man that was a simple but yet sick video on the engine build

[@kareemammar71]

Intelligent wark, Noo one word 👏🏻👏🏻

[@RICARD01]

Next video: Tearing down the EVO engine....again.

[@zuten88]

Haha as always

[@Maxii_2646]

Amazing . Excellent Work MR Dev!

[@vinuyajohn719]

Damn...Devin never fails us. What a lovely ASMR, such a satisfying content.❤ Keep it up man

[@travisgeorge5497]

I love the huhn solution kits!

[@tomassilva1]

You are the man of the EVO 😊

[@davidcheekmountain]

Beautiful work

[@craizhunterx9033]

more content about asmr building engine please. love it

[@zaccamacho3899]

This was Hella awesome to watch

[@curdisdunn5414]

The car ocd mad scientist at work in his zone, clean asf.

[@themilkmanbear3786]

That calmed me down so well, thank you sir 😎👍💯

[@dexpey5060]

I now understand why engines are as expensive as they are. There's so much more to it than I thought.

[@AnakinTuningGarage]

Very clean job and great video! Thumb 👍

[@jaysdsm5645]

I love the bronze on the valve cover but idk how I feel about the red intake, maybe a wrinkle black.

[@eliroberts9362]

Yeah this is really nice to watch

[@NisaOtoServis]

çok güzel bilgiler vermişsin Ustam teşekkürler

[@vijayalakshmip9576]

Great video man ❤

[@ssmartik]

Looks like MAGIC 🔥🔥🔥

[@WhiteRein]

AMSOIL assembly lube for the W! Watching with my 2yr old son. He didnt blink the whole video.

[@texaspowerman]

I would think you would cericoat the entire hot side. Not just to keep it cooler but give it a uniform color. Much nicer looking than wraps and blankets. Of course you could do both. Keep that expensive engine and bay cool.

[@kevinross9577]

When’s the yellow evo hitting the dyno?

[@blacksta-r]

When it's fixed😂

[@JoshuaBloomquist]

He posted it 6 days ago

[@iftygakki8486]

@@blacksta-rLMAO

[@SmithsGarage]

Thank you brother. This video gave me life lol

[@guffbear3000]

Awesome video Devin

[@DanielGarcia-hq9dp]

7:56 the timing chain looks like there’s slack on it when hitting tdc. is that normal?

[@HurdaGemi]

chain tracks oil pump compresses

[@tech-garage1527]

Yes both timing chains And timing belts get slack in certain spots during the rotation completely normal.

[@juxgaming3223]

Insanely great video

[@Anddrew914]

I can't believe I just searched "ASMR car builds" and a perfect video came up.

[@SudicialRaptor]

You are my inspiration for real❤ my respect

[@C.JPhotography]

So relaxing. Not sure why but it is lol

[@Geee23]

Love the work ethics.

[@salesparza3876]

I made the same mistake on the first engine rebuild in auto school. 1 piston assembly at a time. Gj

[@subiboost]

executed perfectly !

[@brandonthorbahn2405]

That block is the smaller than 1 of my bbc heads! That’s wild. BBC 509 cid 750 hp 740 ft lbs of torque. Makes my boat run in the low 90’s!

[@zkazzay]

what was the first thread for? did it had a broken thread or bolt in it?

[@CneyTMS]

I'm also wondering

[@TronBons]

Looks like they were lining up that tool so he could drill out the head for larger head studs.

[@sandydalton4372]

What was the tool you used at the start? Was that to bore out head stud threads for thicker studs? If so is there another tool for the heads to be bored out also?

[@Deadhouse-v7n]

thanks for sharing that. that was epic.

[@spragga1988]

Great work very skill full 👏 👌 👍

[@BeginnerBikeLife]

Thats gorgeous

[@GeMak-GEM]

Cool video, no chatter, no unnecessary advertising just a little too short 😅

[@hondak20si]

Devin can you explain one day all the measurements and how they work together

[@JordanLee-xd3vm]

Whats that blue pressurized bottle he uses to clean parts? Is it some kind of brake cleaner type stuff?

[@thaisa.9794]

Colour combo 💯💯💯👌🏾👌🏾👌🏾🔥🔥🔥😍😍😍😍

[@Gus-hb8bi]

The tap to install a Time-Sert/Helicoil at the beginning leaves a good bit of concern on the table. If this engine fails due to ringland/rings, cylinder scoring, or rod bearing failure; it's because of the metal shavings that made their way into the engine. Not only that, but the hole wasn't tapped completely at 90 degrees. This should have been done at the very least with something covering the coolant passages and cylinder walls.

[@Sammy-j1c]

I liked it no talking just working

[@donuts2129]

Did oem bearings in beginning not fit the spec u we’re going for or why did u replace the not checked ones

[@vanderlindexxvi]

my type of asmr

[@vincerussell7121]

Nice work.

[@jeffreydurham5342]

@4:40 I don't use any hammers unless I'm driving nails. I see see so many "experts" bang the pistons in with some kind of hammer.

[@AshLongie]

Is there a list of bits used aftermarket stuff etc

[@GlanceHD]

in this video he made enough money to build 2 more engines haha

[@mkmercygun]

The Mastery in showcase

[@billm2401]

Are evo engines just old eclipse engines its hard for me to decipher? also i know like a subi Ej 2.5 or a hond k series but when it comes to eveos 😩im stumped

[@williambirksiii9455]

Depends on whether it's a 4g63 or a 4b11. Even if it's a 4g63 it's not exactly an eclipse motor, it got updated substantially, but it would be a later generation of the old eclipse motors.

[@WHTES550]

Nice video man!. Quick question thou, was there a reason why you changed your assembly lube?

[@vcastrojr6799]

Hey Devin Got any turbos for sale for an evo x?

[@reillyp8115]

Rtv on top and bottom of everything. Not gonna leak for a ong time!

[@BrayandPerez]

Pretty sure there will be rapid crack propagation from that initial hole he drilled

[@SquatingDuxk]

This guy knows what he’s doing be quiet

[@lukeo9054]

Explain why you think that?

[@simonpalethorpe8350]

Looks good.

[@zackariahkingi6696]

no way did this guy just drill and tap his own headstud thread????

[@SRT92]

Thought I was the only one to notice that myself 😂 I have got to step my game up 💀

[@Nitro-fu7rv]

The old studs ripped the block threads out.. pretty insane 😂

[@Jeremy_EvoX]

Devin please loctite those bolts on the intake manifold. I swear mine fell off and ruined the teflon gasket for the plenum and RZCrew can’t even follow through on trying to let me buy new gaskets.

[@AmirMehdiSavaedi]

It was great ❤

[@jonathancruz9218]

Devin does it best

[@hovis1647]

Looks like a nice engine to play with that ❤

[@fantom_1]

What wrench is that? Fuel gen 2/3?

[@KeViNMCMXXCIX]

Devin = Goated

[@WhoseGotTheHerb420]

Where did you learn how to build your own engines? This is a goal of mine to learn how from start to finish

[@danyl6796]

Hi Devin, where did you learn all these things, are you a mechanic or did you learn by yourself ? Your brother and you have alot of skills

[@alimarzban4432]

The theta 2 engine in hyundai and kias is sooo similar to this engine...

[@Kyleb94]

Please people like and subscribe this guy is an absolute legend and his work is amazing. Every build is perfect.

[@VampireHunter28]

Very Nice Mentally Soothing .......

[@Elcerote150]

What was that hole for in the beginning?

[@floydkinuthia6509]

Devin is too damn impressive😮‍💨✨

[@puncuator]

my engine should be done around november too. just need a little bit more money to buy a 4p cnc k20 head.

[@JonHop1]

Why u need a 4p head? For what application? Unless u going big all-motor, you should just get a $200 k20a3 head and have it ported and put a supertech valvetrain kit with a nice cam. Saves a ton of $$

[@puncuator]

@@JonHop1 i already have a k24a2 bored to 88mm fully built. i have ferrera valves and everything already as well

[@roynaba7669]

what happened to the awd type r

[@azjohn520]

Where’s the other half? 😂 just kidding people, relax…. Those main caps look like they could handle a thousand HP shot of NOS.

[@mr.cangieter8758]

Links to thise tools would be nice.

[@robertmacdonald2735]

wow...inspirational...

[@Doss_Auto]

thank you

[@tamastoth63]

Evo X engine? 4G11T ?

[@NINESIXTEEN44TH]

? Why do some mech’s use gaskets and some use more silicone putty?