Fusion 360 - CAM Tricks YOU MUST Know-HINT: It's NOT What You Think - Ask LarsLive

CAM Tricks YOU MUST Know is a snippet of Sunday's Ask LarsLive. You Can watch the full episode here:
• Ask LarsLive Fusion 36...
(The advice in my videos are my own and are not intended to represent the views of my wife, children or employer)
My email:
[e-mail]
Want to learn more about Fusion 360? Check out this link:
autode.sk/2rXApL2
Free CNC Handbook:
www.larschristensen.org/free-...
LET'S CONNECT:
/ lars_cadcam
/ mrlarschristensen
/ cadcamstuff
MY SITE:
www.larschristensen.org/

[@gracjanlada4622]

This is just awesome! Thank you Lars!!

[@btigenie]

Perfect! I added a third "copy" of the toolpath for a slot cutter bit and it works perfectly! Thank you!

[@miguelangelares7830]

In each video of you I learn something new, something useful, thank you very much !!!

[@cadcamstuff]

You are so very welcome 👍😊

[@78sharpshooter]

Another awesome lesson. Thanks!

[@zep202020]

This video is what I needed , please do more cam videos , i’m still struggling with the different tool paths , silhouette , and I am also struggling with the linking tab , there’s so many options in there and I’m not sure on how to use all of them .

[@Beechdrvr]

Great tip Lars! Thanks.

[@danl.4743]

We do need a lot more CAM, Lars. For someone like me who follows you for a while now, you gave a lot of teaching of "Design", but proportionally much less of "Manufacturing".

[@jonathanmelancon3021]

It is good to know that most CNCs won't accept splines though. You have to convert everything to arcs.

[@jenspetersen5865]

Lars, this mills the operation in two heights. Could this be used to also ramp down to the 2nd depth, say you wanted ramping from 120 mm to full poke through at 150 mm?

[@cadcamstuff]

I think you could with the Trace toolpath

[@jenspetersen5865]

@@cadcamstuff Mange tak Lars!