FX IMPACT M3 REASSEMBLY

[@woodsman2433]

An air rifle such as the FX is far more intricate than any firearm, great tutorial

[@Airbuks]

Thx

[@michaelpintal5419]

They are very intimidating but once you disassemble and reassemble it, it’s really pretty easy to do

[@same3872]

Thanks my dude, would've taken ages without your guidance, turns out, much like my pre loved CZ 527, my problem was solved by just reassembling the M3 properly, much to my relief

[@Airbuks]

Nice buddy , so happy these videos help out people fixing there’s 👊

[@larrycoleman2225]

This is appreciated so we have an excellent resource for the M3. Much thanks!

[@Airbuks]

Your welcome 🙏🏻

[@thichnguyen3946]

@@Airbuks em ở Vietnam em rất yêu thích cây súng săn M3 đó. Anh có thể nào giúp đỡ cho em chuyển phụ kiện về Vietnam em tự lắp ráp nha. Tiền 💴 em sẽ chuyển khoản em không lừa anh.

[@eoinwestman6222]

Very informative video. Everything clearly explained as always. Thank you

[@Airbuks]

Thx

[@bucstart]

Absolutely terrific video! This really takes all of the apprehension I had in my buying consideration between the Impact and the Maverick. Impact for me. Thanks so much for putting such a high quality video together. You are da man!!!!!

[@Airbuks]

Thx for the support mate 👊

[@ThuongHoang-gz9ib]

I want to have a wedding ceremony in Vietnam, so how much money should I ask you? Thank you

[@davidjohnson5369]

Thank you so much for sharing this video .This helped me replace an unseated valve & valve rod. I really appreciate your efforts

[@thirdworldadv1312]

Thanks! This made me much more confident in tearing into my gun and reassembling.

[@Airbuks]

👊

[@mackellyman5642]

FX is typical Swiss quality. What a great design.

[@Airbuks]

Swedish 😉

[@abengtebaran5346]

Like your job dismantles the gun and how to fixs it back up absolutely most awesome lovely job guy like very much.😳😳😳😳👍👍👍👍👍😎

[@Airbuks]

Thx for the support mate 👊

[@ansar7740]

Great video, explained almost everything properly.

[@Airbuks]

Thx mate 🙏🏻

[@BrianLane-d2d]

Brilliant video ❤

[@matts8638]

Thanks for taking the time to make such a great assembly video. Really appreciate it. Cheers.👍

[@Airbuks]

Thx for the support!

[@Frankbastiaansen]

Great video!, what I do myself is put the barrel in before tighten the screws of the top plate. it can be out of line a fraction if you don't

[@Airbuks]

Good tip thx , i will incorporate it in the next one .

[@brandonmatz9832]

Great video I've been thinking about building an M3 from my older model Impact 2. So I contacted FX and they said I could do it. I have the older 53cc Power Plenum that I put in about a year ago. But I still want more power to shoot slug's faster. So if by mid Jan. early Feb. 22 I'm going to order the bigger plenum the 720.

[@Airbuks]

I have made a video updating as much as possible in the mkii to be almost a M3 😉

[@Huben3DParts]

Is it possible to get a valve housing from the MK2 and replace the M3 valve so it's more of the fine adjustability of the MK2 valve adjustment?

[@franciscocarvalho2424]

Está é show é para doação lembra de mim kkk sempre vídeos top like garantido sempre

[@stevenrowe5047]

Great video. I was just wondering where did that extra o ring laying on your bench came from and where did it go? Thank you.

[@Airbuks]

Will have to rewatch my own video to see that , has been long time ago 😊

[@stevenrowe5047]

@@Airbuks it was at the end when you were putting the air guage on. Thank you.

[@Airbuks]

@@stevenrowe5047 that’s a extra oring I sometimes add extra underneath if I can’t orient the gauge face like I want 😉

[@stevenrowe5047]

@@Airbuks thank you. I just hate to have everything back together and have extra parts. 🤓

[@michaelpintal5419]

When you set the C1 at 6 to 6.5mm, where is your macro and micro set at?

[@IzaelLealairguns]

it's a dream hehehheheh. ! very good your videos! I would like to see you shooting ... 😜😜😜😜🤜🏻🤛🏻👍🏻👏🏻👏🏻👏🏻👏🏻

[@Airbuks]

Yes indeed , soon I will make shooting videos again 👍🏻 but lately the weather was horrible at the moments I didn’t have to work .

[@IzaelLealairguns]

@@Airbuks OK thank you for the attention ! 👍🏻👊🏻🤝

[@pakonja]

Can you share with us what torque is required for tightening screws (all screws)?

[@Airbuks]

There is no specific specifications on that I do it by feel 😉

[@indraaccuracy352]

Thank you bro, this very help full video, keep the good jod

[@suryaadi1261]

Dream of having an FX impact rifle

[@goodboyringo9716]

Tip ... Always turn the screw/bolt counterclockwise slowly until it clicks then clockwise and it will never cross thread.

[@Airbuks]

Yeah I know , I mention it in so many videos aswel 👍

[@goodboyringo9716]

@@Airbuks . I didn't know you mentioned it in other videos. I just started watching your videos , nice job keep it up.

[@TheVabene73]

Hi my new m3 sniper when the barrel is all the way seated in place has a slight give which of course stops when tight the grab screw. Maybe the stop pin is smaller in the back hope doesn't present a problem 🙂

[@Airbuks]

Hi , it shouldn’t be a problem. It’s possible the not the pin but the groove in the copper part is to big 🤔 these blocks are machined and they use the same size pins on all guns and a smaller or bigger one won’t fit the predrilled hole

[@Airbuks]

@@TheVabene73 🤣 maybe you are , but to reassure you it’s no problem at all . The tiny bit of silver not going into the block isn’t a problem, I have one barrel that is also like that , I don’t know why . But a tip is to put your magazine in slide your barrel in and tighten it like that , this way you always have the perfect fit/depth between the magazine and the barrel

[@Airbuks]

@@TheVabene73 i like to interact and help If I can 👍🏻 It’s possible that it is the groove in the copper part , do you have a other barrel to compare? If with different barrel the problem still exists then the pin is the problem , but that is very unlikely ! But if it should be for a reason the pin I would return the impact for a swap , not that it will affect accuracy but for 2k it should be made like it’s intended 😉 But as I said try a different barrel and see if you still have the same problem

[@ronnygordy5862]

That was a really helpful video!

[@Airbuks]

Thx

[@TripleGRogerLait]

Good video buddy 👍

[@sashimatsungozukum7222]

Great video..👍👍 bro are the valve housing and valve pin same as in MK-2

[@Airbuks]

Yes they are identical

[@sashimatsungozukum7222]

Thank you

[@simoncoher4841]

Hi mate hope all good with you, So I've had my M3 nearly 18 months now and it's developed a it's first leak it's leaking from the 2nd regulator screw where you adjust it I went to turn it up a bit then the air started to come out so thinking it's the Oring been looking for videos on it but couldn't find any is this a quick and easy fix ? Thank you..

[@Airbuks]

Hi mate , all good here 👍 thx First leak after 18m that’s not bad 😉 It is a easy fix , degass the entire system and take out that adjustment screw . You will find 2 orings on that screw . 99% sure one of them gave out

[@simoncoher4841]

@Airbuks Thanks mate just waiting on Orings , keep the M3 videos coming love them ...

[@simoncoher4841]

@Airbuks sorry mate another question can I just take the trigger guard off to take the screw out of 2nd regulator or does the trigger have to come of it to ? Thank you..

[@Airbuks]

@@simoncoher4841 yes offcours you can remove the trigger guard for easier access. You might find that it’s difficult without removing the trigger but if you just need to remove the adjustment screw you can leave it in place if you don’t want to remove the trigger

[@simoncoher4841]

Great I try to remove the screw just by taking trigger guard of first and go from there, As my trigger is set up perfect for me don't want to mess with it if I don't have to. Thanks again much appreciated..

[@KevinNguyen-r8z]

what is that quick release scope mount?

[@Airbuks]

Made by Spuhr mounts

[@johnathansteele9000]

Would it be possible if you could say exact model of the Spire Mount you use and where exactly we can get them. Thank you in advance.

[@Airbuks]

spuhrwebshop.com/en/isms/sp/30/6/qdp-3602.html You can buy them straight from the website

[@lbtn1]

Hey bud, the last gauge that you put on, is it any different than the other gauges in the gun?? I heard it is shorter in depth, would that be right??

[@lbtn1]

I realized it’s the brass spacer I’m missing, where can I order that part from??

[@donnellweathersby4725]

I really loved the video, Very informative and educational. I would also like to know the name and model # of the mount you have for your scope . Thanks again for a great video. Cypress, TX

[@Airbuks]

Hi , thx for the support! These is a link to the mounts 😉 spuhrwebshop.com/en/isms/sp/30/6/qdp-3602.html

[@alihagan0]

What would cause a leak out of the front of the plenum? Just old O rings?

[@Airbuks]

Definitely a oring failure, even not so old noes can fail at any time, that’s sadly enough the nature of orings It can be 1 of 4 orings then . If it leaks on the edge of the plenum then it would be the big one inside in front of the threads. If it leaks between the connection front and back part , it can be the 2 outside once or the once that seal on the valve rod .

[@alihagan0]

Thx your time. The videos are concise and of great quality. Much appreciated.

[@sniperndeso5648]

Amazing 🤭👍 untuk ku bos mantap

[@fredcarter7003]

Good video

[@Airbuks]

Thx

[@jennyebbes5074]

10k subs reached congrats .....

[@Airbuks]

Thx 🙏🏻

[@pipo8044]

Buen vídeo 👍

[@petertlr1644]

Where do you get the Spuhr QD mounts from ? 😊

[@Airbuks]

Hi , most of my gear comes from Krale Schietsport 👍🏻

[@tkielek24]

Sir I got question I got mk2 impact I want to upgrade to M3. What parts do I need to buy????

[@Airbuks]

Hi sir , I am afraid to disappoint you as the M3 is the first impact edition that has got some updates that are not possible to be added to the MKII . The 720 powerplenum is something that will be available soon for the impact mkii

[@tkielek24]

@@Airbuks Now I don't understand. Ernest Rowe said power plenum can be upgraded. Regulator power wheel adjuster but butle need different pin Now. You are telling only power plenum hmmmm Anyway You are making great video

[@Airbuks]

@@tkielek24 I understand the confusion, the power plenum is upgradable. The other things you know from Ernest are just little things . Indeed you can swap the powerwheel to the one with the 16 clicks but you can upgrade to the quick tune system , you can’t upgrade to ambidextrous cocking Handel but you can use the short trow lever , you can’t upgrade to the 1 regulator bottle setup but you can use the bottle with th new valve on the mkii but that doesn’t bring any changes . So as you see you can do some things partially but only the plenum is the item that can be completely upgrade ( as far as I know at the moment 😉 )

[@salemdorgham2891]

thank you very much

[@Airbuks]

👊

[@princetonrichard9508]

what kind of loctite are you using brother?

[@Airbuks]

Blue loctide 243

[@princetonrichard9508]

@@Airbuks thank you

[@faustotinoco779]

Can u do the m4

[@rabahiabdelkader7440]

Hi, I have impact m3, 1st reg at 138, 2nd at 170,macro at16, micro at4, 23 grn hn 960 max, 2 mgazin per feel, I think it's not normal, I want more tuning and more shoots, if you can help pls

[@Airbuks]

Hi there , I think you got the regulator numbers mixed up 😉 1st reg is the one in the bottle adapter and the second one is the one behind the trigger . My guess without seeing your M3 is that you are over powering the second regulator pressure with to much hammerspring . Tell me what is your barrel length?

[@rickvandepol7951]

Hoi, een vriend van me heeft een FX Crown gekocht met 500mm slugliner A, we zouden graag 21g NSA slugs schieten maar weten niet goed hoe we hem moeten tunen. Hoe pak jij dit aan? Bestaan er hier video's van die het verschil uitleggen tussen de hamerveer aanpassen met de inbussleutel of met de powerknob? Want ik begrijp niet goed hoe die twee samenwerken, in mijn ogen lijkt de powerknob nogal grote stappen qua snelheid te nemen. En wat als we die 930fps tikken? Gaat onze groepering dan eveneens goed zijn of moet je hem dan nog wat meer tunen om er de beste accuraatheid uit te halen? Heel moeilijk om informatie over dit onderwerp te vinden, vind het tof dat je deze video's maakt!

[@Airbuks]

Hi , spijtig genoeg heb ik geen crown 😏 anders zou ik een video maken , maar de theorie is moeilijk in text uit te leggen. Van waar ben je ?, misschien wonen we niet ver van mekaar 😉 België is tenslotte niet groot hè

[@rickvandepol7951]

Regio Turnhout

[@Airbuks]

@@rickvandepol7951 ik ben van aarschot 😉

[@hosseinkhademi7792]

I love fx

[@Airbuks]

Yeah me to ! But that you probably know 😂

[@ongthongvlogs740]

Chuyển về Việt nam không bạn.?

[@cluus100]

What is that lubricant?

[@Airbuks]

It’s a lube from Huma air that is specially designed to be used for airguns and is very oring friendly

[@أبوعبدالإله-ح2د]

👍🏻👍🏻👍🏻

[@idamsuprianto721]

how much does fx impact rifle cost?

[@Airbuks]

The impact M3 sell for about 2000$

[@chipsammich2078]

I dont think I've ever in 25 years of manufacturing seen someone use a Allen wrench like that..

[@Airbuks]

So ? I am not in manufacturing 🤷‍♂️

[@chipsammich2078]

@@Airbuks No... that was a compliment.. your method seems alot more efficient.. ill be trying that next time I use an allen.. Well done sir

[@Airbuks]

@@chipsammich2078 Oh ! sorry for the short reply then 🙈 I thought it was ment in a different way 😬

[@chipsammich2078]

@@Airbuks nope I was amazed my friend

[@kookashi]

yo can you tell me the price FX impact M3.

[@Airbuks]

Check your local FX Dealer

[@JustMe-xe2wu]

Booked my Fx impact M3 , delivery time is 1 Oct, 4 months , to India.... what's the problem FX, pray I do not fall prey to corona without shooting my gun...

[@daiwangel]

how much measure 5.5mm original

[@aventuras257]

No pude entender por donde pasa el aire desde la botella hasta el plenium

[@Airbuks]

English plz ?

[@aventuras257]

I couldn't understand where the air goes from the bottle to the plenium

[@Airbuks]

@@aventuras257 it goes true the 1st regulator into the second regulator true the action block into the plenum

[@seyhmusaltunsoz3675]

👌👍😊

[@SniperHunterChile]

💪🏼💪🏼

[@ccdmain]

where is the regulator then?

[@xaramarcus5796]

Dont have m3....but nice video...

[@Airbuks]

Thx

[@青楼满座-z7n]

浙出M3

[@tommyww6697]

[@Airbuks]

Thx