FX King **FULL RACKNLOAD REVIEW**

[@Brunosdad]

I had a similar issue with my M3 where my hawk mounts would not sit straight once I tightened them up only very slight but I could see it so I got the FX mounts and that fixed it.

[@grenvillemoore2346]

I had a look at a left handed sub12 at SGC Exeter. I wanted to see how it felt before ordering a FAC version….. Wow! For a 3.45kg gun it shoulders superbly and the balance is sublime. In no way does it feel that heavy. Shame the cocking lever isn’t still on the right hand side (which I prefer) but that’s not really a gripe! Very impressive and I’m looking forward to seeing what the FAC can do.

[@wsmc8275]

Hey, check out the bolt that holds on the trigger guard. The have a socket head over a tapered hole on the guard. That should be a flat head . Also the two screws towards the front holding on the stock are pretty short. Not mush threads there holding on the stock. Pretty sloppy and lazy if you ask me. I ended up changing those and used washers for the front screws. High dollar slapped together.

[@garrypettingale4314]

So glad you pointed out the problem with the rail. I have an IR scope that I like to change out onto several different rifles from .243, 22.250,.22lr and air rifle this discrepancy in the picatinny rail has put me right off.

[@Noname-ig1iu]

I’m buying this with the m3 with accessories next month. Thank you for the review

[@sid35gb]

I avoid picatinny rails and mounts on air rifles because no one is working to standard.

[@grenvillemoore2346]

Hi Rack, Just about to place my order for a King FAC in .22 and have also settled on the Sumo mod. Can you tell me, is the thread a std 1/2” unf or will I need an adapter? If so, which one? Great review as ever.

[@racknload]

Hi buddy, standard thread. That'll be a nice set up 👍🎯

[@grenvillemoore2346]

@@racknload Yes mate. Waited a long time for this!.. Alpex 4K lrf and PBIR X… sorted! Thanks for the info Neil 😊

[@racknload]

@@grenvillemoore2346 No pest will survive! 🤣 Enjoy buddy! 🎯

[@grenvillemoore2346]

@@racknload Cheers mate! 😄

[@michaelhunter3471]

Your eye relief would increase heaps if you extend the but.

[@M4rkmcc21]

I notice the cocking arm touches the laminate when pulling the lever back. Happens on mine too.

[@AirgunPesting]

What twist rate has the .22 600mm

[@AntonyLD]

Answer to the scope issue: Immersive Optics 14x50 . I've ended up with 3.

[@TMFShooting]

Great Stuff Neil 💯💥💥💥💥💥💥💥

[@dave_724]

Maybe worth looking at some eagle vision mounts they do adjustable mounts both in reach forward and standard one peace

[@holmfirthcomputers220]

They probably bought the rail cheap from Turkey or China.. not checked properly :(

[@BT-st4ho]

The rail is not a lose part. It’s part of the block I think. FX machine the block in house

[@aytacguler4124]

The products I ordered from Turkey were of very high quality. This must be a manufacturing defect of FX or as you said, it is made in China.

[@andycarless9069]

Cheers For The Review 👍👍

[@dodysetiawan4627]

Can we in Indonesia promote the unit you showed on KZbin? We are very happy to see it and we want to try it. Can you please send us a pilot unit to broadcast it in Indonesia or to our friends in our club who like it so much

[@JohnDoeTheTroll]

🤣

[@paulcarruthers1314]

Us also in Newcastle

[@AnotherJonDoe]

I hear a new, FX Impact M4 and Dynamic/King V2 is going to be released soon.

[@keesverhagen9227]

Me is also waiting for that. And hope that is will have some much needed upgrades. Those FX are a bit to expensive to not be topnotch.

[@wiggly71]

You need the eaglevision forward reach mounts way better than those what I've got on my king.

[@beauboydave]

Very good guns admittedly. Overpriced overrated and overcomplicated. In my opinion.

[@riderone8593]

eaglevision mounts every time, sub 12 and FAC

[@holmfirthcomputers220]

They are worse than BSA for strange mounting.

[@davegrimshaw7318]

A Pantera in a different stock..

[@sekefy1]

650 FPS??? is this a blowgun??? This rifle can shoot easily 1250 FPS out of the box. This is a very expensive air rifle to buy the non FAC version.

[@racknload]

It's a sub 12 as stated buddy....

[@wsmc8275]

Case is also cheap and flimsy.

[@alanfarley3888]

Ffs Rack, I'm trying to save money and stick to full bore.....Nice bit of kit

[@stevevw34]

Probably do you have to buy a fx mount !

[@nigelbase1196]

"reach forward mounts" Neil😉

[@racknload]

I know yeah, but you shouldn't have to really...

[@declanhudson9883]

Cantilever mounts 😊