G Body Brake Booster Replacement 83 Regal

[@derekderekison3241]

Great video! Crazy good work with the camera angles and the arrows were helpful too!

[@StillStandingGarage]

Thank you. I really appreciate it. Thank you for watching 🤝.

[@michaelsimmons9613]

My Man! Great video, made it very simple and clear.

[@StillStandingGarage]

Thank you 🤝

[@Wacoldestv1704]

Thanks Homie... helped me out big time... my low low brake booster went out. 👍

[@StillStandingGarage]

No problem. Glad it helped out. Thank you for watching 👊💯

[@heisenberg7186]

thanks i just used your other video for the rear drum brakes now im watching this

[@StillStandingGarage]

Glad they're helping out.. thanks for watching 🤝💯

[@Never2Loud]

Really good tutorial. Thanks for sharing once again.

[@StillStandingGarage]

Thank you for watching 💪 💯

[@_raulfuerte]

Oh back at it‼️‼️💪🏽

[@StillStandingGarage]

That's right 💪💯

[@kbgonzo9202]

This video really helped alot. One question. Once you have finished removing the air and bubbles are no longer visible. Do you remove all the fluid from the cylinder again,remove the tool with the hose, screw the brakes lines back, and then put fluid again into the reservoir? Thank you

[@StillStandingGarage]

I leave the brake fluid in there. I quickly remove the tool and screw in the brake lines. Thank you for watching 👊💯.

[@juniorblack397]

Love your videos bro keep up the good work.

[@StillStandingGarage]

Thank you I really appreciate it 🤝💯

[@bigmeece21]

Great Job bro. Thanks for sharing, very informative 👍

[@StillStandingGarage]

Thank you for watching 🤝💯

[@justinroper6586]

Nice video. Really helpful doing this on my trans am.

[@StillStandingGarage]

Thank you! 💯

[@robertjrherrera3594]

Very good video, thank you!

[@StillStandingGarage]

Thank you 💪💯

[@kmb1617]

know this is an older video but can you explain the proportioning valve bleed tool? I'm struggling to bleed the brakes on my Regal right now

[@StillStandingGarage]

For sure. The bleed tool goes in place of the sensor on top of the proportioning valve. With the tool in there, it locks the shaft inside, preventing it from moving. This will allow you to properly bleed your brakes.

[@kmb1617]

Thanks man, I appreciate the reply! Just ordered one. @@StillStandingGarage

[@tonedeafist]

Great video, thank you!!

[@StillStandingGarage]

Thank you for watching 🤝💯

[@805coating]

Nice video. Very informative!!

[@StillStandingGarage]

Thank you 🙏💯

[@tonymartinez1647]

I installed a new brake booster on my cutlass but i cant get it to brake.. i did bleed it but pedal goes. To the floor. Any advice?

[@StillStandingGarage]

Did you bleed the lines? Also, did you use the proportioning valve tool to vleed them?

[@tonymartinez1647]

@@StillStandingGarage i didn’t get the valve

[@StillStandingGarage]

Try using the tool. Without it, you can lock up the proportioning valve, and it will prevent you from properly bleeding the lines.

[@tonymartinez1647]

I will order that valve tool amd see what it does after

[@acollins9277]

Good job.👍🏾

[@StillStandingGarage]

Thank you 🙏

[@jgjays6525]

That’s what I forgot to use is that blue tool! Do u leave it screwed on until you finish bleeding the lines?

[@StillStandingGarage]

Yeah it stays in until bleeding of brakes is complete... thank you for watching

[@jgjays6525]

Ty bro

[@jgjays6525]

No wonder my brakes ain’t catching rite I also changed the power booster and new lines

[@StillStandingGarage]

Yeah it might be your proportioning valve that's locked up

[@williamclark6704]

Nice homie!!!

[@StillStandingGarage]

Thanks 👊💯

[@denniskitchen6872]

Nice job my friend

[@StillStandingGarage]

Thank you 👊💯

[@_raulfuerte]

StillStanding💪🏽

[@StillStandingGarage]

💪💯

[@85_montec]

I hear mixed feelings with parts from rock auto… Have you had any issues with the booster or master cylinder?

[@StillStandingGarage]

I've had a good experience with every part i buy from Rock Auto. Thank you for watching 💪💯

[@85_montec]

@@StillStandingGarage Thanks for the feedback boss🤘

[@StillStandingGarage]

No problem 🤝

[@jrburger1987]

where did you buy your brake booster at? the whole assembly?

[@StillStandingGarage]

I bought it from rockauto .com

[@jrburger1987]

@@StillStandingGarage thanks that’s what I was going to look at next.

[@elcaminodraco]

So before the magic of editing. How long did it take for you to get the 4 bolts off the booster? I had a hella of a night last night getting mine off and the new one back ON and this video did zero when it comes to preparing for that BS.

[@elcaminodraco]

Just so everyone watching knows it isn't going to be no 6:13 minutes to remove this booster and/or master cylinder.

[@StillStandingGarage]

I go over it in the video. I didn't have any issues removing it at all. My issue was putting it back on. I went over this in the video... I mentioned all my issues when reinstalling. I do mention it took 45min to a hour just to link and bolt up the booster. Normally work like this will never take the time you see on a video. As for me I like to at least mention my struggles and time it took. If you have any questions in the future on something you see on my channel feel free to hit me up on here, Instagram, or email I'm more than happy to help as much as I can.

[@elcaminodraco]

@@StillStandingGarage thanks for the video. I still liked it but took an ass kicking from my El Camino. I am sore as a bitch! 😂

[@elcaminodraco]

@@StillStandingGarage badass ride too sir. 👊🏾

[@elcaminodraco]

@@StillStandingGarage did you have any issues bleeding the master cylinder while mounted on the booster like that? Should I bench bleed it to keep it more level?

[@towcars5550]

Is it necessary to bleed it like that...or doing it old school will be the same

[@StillStandingGarage]

If replacing the master cylinder, it needs to be bench bled or like I did.

[@towcars5550]

Ok I didn't know there was a difference how yours work out reason y I'm asking some video people did it before they installed it

[@StillStandingGarage]

@towcars5550 Mine worked out. It has to bench bled because the master cylinder is new and doesn't have any brake fluid in there. You want to ensure it's properly bled.

[@towcars5550]

@StillStandingGarage thanks man I'ma try your way ...

[@nimster64]

Where are you located? How much do do this to a coupe deville?

[@StillStandingGarage]

I currently don't take in side work. Thank you for watching 🤝💯

[@towcars5550]

What's the reason for the valve bleeder tool for

[@StillStandingGarage]

It's so the pin inside the proportioning valve doesn't block the pathway when you're trying to bleed the brakes.

[@towcars5550]

@StillStandingGarage 🤔... I'ma try and look in to it more ..sounds like it will make a difference...I usually bleed my brakes old fashion wat from rear to front

[@StillStandingGarage]

Yes, it's from the furthest wheel to closest to master cylinder. Passenger rear, driver rear, passenger front, then driver front.

[@TOCHIES]

Will a size 9" gm chrome brake booster fit my 1985 Buick regal?

[@StillStandingGarage]

I'm not sure I've never tried it.

[@hawkBerlin]

I need exactly the same for my Cutlass. Can you please give the part numbers. I just find separate parts: booster and master. Want the same combo like yours Thank you so much...

[@StillStandingGarage]

Here's the part number 50-1243. I got mine from RockAuto, but it looks like they're out. You're going to have to do some searching, but now you have the correct part number...thank you for watching 👊 💯

[@hawkBerlin]

@@StillStandingGarage they are out. I need to search but thank you 👍🏻

[@nickgarage8036]

👍

[@carlostbanks]

🔥🔥🔥🔥

[@StillStandingGarage]

🤜🤛🔥💯

[@mr84ttop34]

Nice! What’s the part number for that?

[@StillStandingGarage]

It's part number 501243 from RockAuto

[@mr84ttop34]

@@StillStandingGarage thank you bro I’m ordering mine right now!

[@thetasteofluck]

eso es todo !!!!!!!🖒👍

[@StillStandingGarage]

Gracias 💪💯

[@GrandNash-bk2kq]

Do I need a gasket for brake booster?

[@StillStandingGarage]

I didn't use one. I'm sure they make one for it.

[@GrandNash-bk2kq]

Dude I’m having such a hard time getting the rod on the pedal. I tried loosing the booster bolts, and still can’t get it to pop in 🤦🏾‍♂️

[@StillStandingGarage]

That sucks! If you haven't already, I would say to try it with one more person. One person outside moving it around with the nuts off the booster and you inside trying to pop it in.

[@reyesbravo1341]

Monte......Monte....Monte..Monte Monte Monte.

[@StillStandingGarage]

Coming soon.... lol

[@reyesbravo1341]

@Still Standing Garage puro pedo homs. This was a really good video. I actually needed to change a break buster on a 80 el camino and I had never did one so I took it to the mechanic ese lol SMH wish this video would have been out about 8 months ago. Gracias for the knowledge and wisdom. Keep them coming brother.

[@StillStandingGarage]

It's all good lol.... Thus was my first time replacing a master cylinder booster....Thank you for watching

[@towcars5550]

Dammm i just realized that my brake line never been connected 😂..ima have to check under my car tonight

[@StillStandingGarage]

Damn

[@Rydeauto]

I'm having a bitch of a time getting the brake pedal back on the booster rod.

[@StillStandingGarage]

Yeah I had that same problem... I think with two people it'll make it easier. One outside wiggling the booster and the other inside trying to pop it in.

[@marcusreynolds226]

???????

[@acollins9277]

Good job.👍🏾

[@StillStandingGarage]

Thank you 🤜🤛💯