G-shock Battery Change and AC Reset GA1100 GA1000 - Aviator Gshock Watch

  Рет қаралды 89,071

Gi-Shock-Go

Gi-Shock-Go

Күн бұрын

Пікірлер: 104
@vaibhavsahdev6615
@vaibhavsahdev6615 3 жыл бұрын
Had to suffer half a dozen stupid videos to find this video where you actually showed how to open the battery latch. Thanks a ton brother.
@brownowlleeds6901
@brownowlleeds6901 3 жыл бұрын
My Baby G wouldn’t work after a jeweller replaced the battery. I watched your video and although it took 3 ac resets, it did work. Thank you for your help.
@jonathankern5814
@jonathankern5814 5 жыл бұрын
I had given up on replacing the battery in my Casio watch until I saw this. Thanks!
@mannydgoo
@mannydgoo 4 жыл бұрын
I was about to throw away a GShock 3230, I messed with it, finally works! Thanks!
@vmbo
@vmbo 2 жыл бұрын
Great video for people like me who just want to replace their battery with stuff they have laying around instead of becoming a part time watchmaker. Paperclip, thumbtack and screwdriver did the trick. I'll leave the finger condoms and tweezers for somebody else.
@jessemir5416
@jessemir5416 4 жыл бұрын
Great job. Only thing is I didn’t see you complete the reset. I know you said how to do it. Thank you again for this informative and practical tutorial.
@gabrielcornea9119
@gabrielcornea9119 3 жыл бұрын
17:54
@BeckVMH
@BeckVMH 4 жыл бұрын
Great videography and voiceover; however, if I may, I recommend a couple additions... use “finger cots” (rubber covers for your fingers, cheap on eBay) or rubber gloves to prevent transfer of skin oils, debris to the movement. Also, use tweezers to remove the batteries to avoiding unnecessary trauma to the metal cover; it will break. You rightfully mentioned avoiding getting fingerprints/debris on the interior glass, but then lay the dial/movement on the towel collecting fibers and debris on those surfaces which will be visible when the parts are reassembled. Pardon me if I’m sounding picky, but these are a few simple aids to a DIY. Thanks for posting.
@GiShockGo
@GiShockGo 4 жыл бұрын
Stevee Wonders thanks for the constructive feedback. I tried to narrate the process by using tools readily available to the average person. You’re right though, those tools you referenced would be ideal for a battery change. Thanks for taking the time to comment.
@BeckVMH
@BeckVMH 4 жыл бұрын
@Gi-Shock-Go... thanks for your response. I’m not a watchmaker, so my input should be taken in context. I do use them for my mechanicals, view tons of vids and have worked on a few of my quartz. All the best to you.
@lkkop
@lkkop 3 жыл бұрын
Totally agree!
@nickferrando9344
@nickferrando9344 4 жыл бұрын
thank you!this video helped me get my old g shock up and running
@timeconstrained2400
@timeconstrained2400 5 жыл бұрын
great video but I didn't see the AC reset make the hands go back to twelve.
@camssz28
@camssz28 5 жыл бұрын
Yes thats right! Where's the reset part?
@22noorrandhawa57
@22noorrandhawa57 5 жыл бұрын
It’s my first time I’m going to replace my G-Shock batteries so need some help from you guys on Ac reset. Is it necessary ? How it will affect my watch and would there be in saved country times still after ac reset like you know that kind of time setting where you have to select the country would that feature still be available after ac reset ? I will really appreciate on any kind of help provided.
@zackamanda9799
@zackamanda9799 3 жыл бұрын
@@22noorrandhawa57 I use a paper clip on all my AC resets. I pull the paper clip out and make a "U" shape and make contact with the AC and battery. Works everytime.
@gabrielcornea9119
@gabrielcornea9119 3 жыл бұрын
17:54
@timeconstrained2400
@timeconstrained2400 3 жыл бұрын
still didn't see the watch go back to twelve.
@davidwill7379
@davidwill7379 3 жыл бұрын
Thank you for the video. Very informative! A thought, you mentioned the back plate position as a pet peeve, agreed on that note, however, in addition, if the plate isn't on correctly will the sensors properly make their contact on the brass (or whatever gold-ish colored material it might be) in the back plate?
@1rightrev
@1rightrev 4 жыл бұрын
YES reset is necessary as it zeros the digital components!
@theronwolf3296
@theronwolf3296 3 жыл бұрын
Basically well done but I have some advice (from actual experience) 1 Don't handle and stuff with fingers. Very easy to damage or get skin oil on the surface. Use tweezers 2 Get silver oxide (like the SR927). Lithium as used in this video will work, but have a much shorter life. Worth the couple of bucks difference. 3 Remove the band before starting. Not essential, but much easier when you're not wrestling with it. 4 Don't just do the reset. After doing the reset follow the hand calibration steps in the manual (can be downloaded from Casio). When the batteries go dead, often the hands get out of sync. This was even visible on the video--after resetting, still the minute hands in the two time dials were not agreeing with each other, and the function hand on the bottom was off as well. 5 If possible, take pictures with your phone as you remove each component. Makes life a lot easier when putting back together.
@theronwolf3296
@theronwolf3296 3 жыл бұрын
IMPORTANT NOTE regarding my comment. I realized the wording was misleading, do not pinch the battery sides with the tweezers. That will short it. Edges only.
@Itsmaikitosworld
@Itsmaikitosworld 5 жыл бұрын
Great job Chavo, keep up the good work, very informative.
@ken-sz2dq
@ken-sz2dq 2 жыл бұрын
Hey men big fan , i have a question , my watch is drain and it shows battery 🔋 , after i purchased and replace the battery with the same as the old one . Its just appear display . No HSET , AND no FUNCTION can you help me
@GiShockGo
@GiShockGo 2 жыл бұрын
Did you perform the AC reset?
@ken-sz2dq
@ken-sz2dq 2 жыл бұрын
I have , so many times
@CONCRETEJUNGLE-be6ic
@CONCRETEJUNGLE-be6ic 5 жыл бұрын
Thank you sir,I was about to throw my watch out the window.
@GiShockGo
@GiShockGo 5 жыл бұрын
Concrete Jungle Nooooooo!! Easy fix. Glad I helped
@TheKarpinTechy
@TheKarpinTechy 5 жыл бұрын
Great video!May I only suggest to get some basic tools like tweezers, dust blower and a silicon matting it will help a lot and those tools are cheap!Thanks! One more thing base on the label on the battery you should reset it by shorting the AC and the negative terminal, but you were touching it on the positive terminal, just my thought anyway still a great video!cheers!
@lkkop
@lkkop 3 жыл бұрын
I agree, he should use proper watch tools when doing this kind of work.
@SoCalWatchReviews
@SoCalWatchReviews 5 жыл бұрын
Another great video man!
@GiShockGo
@GiShockGo 5 жыл бұрын
SoCal Watch Reviews thanks!
@22noorrandhawa57
@22noorrandhawa57 5 жыл бұрын
Would I be able to select countries or you know country time zone or different time zones on my G-Shock after AC reset.
@fckinnonstick9919
@fckinnonstick9919 5 жыл бұрын
What size of screw driver did you used?
@jasonlara
@jasonlara 3 жыл бұрын
Thank you for taking the time to make a video of this. Excellent camera. That damn spring stuck to the rubber backing and I had no clue what hole to put it in. You addressed this to my surprise! My watch is different (5240 GW-A1000) but close enough that I could figure it out. Stay safe. What kind of camera do you use by the way?
@sashapaliska
@sashapaliska 10 ай бұрын
What kind of lubricant for the rubber seal?
@mcarrasco45
@mcarrasco45 6 ай бұрын
Esa lata que sujeta las pilas se rompera en algun minuto, malo el sistema de sujecion de las pilas.......Gracias por su aporte
@xsoulsiilencex
@xsoulsiilencex 4 жыл бұрын
Great . Thanks for video
@zackamanda9799
@zackamanda9799 4 жыл бұрын
16:57 Great video , but an AC RESET should be done every time you change the battery whether the watch looks like it is working or not. Why would you want to open up the watch again when it was already open 5 minutes ago.
@lkkop
@lkkop 3 жыл бұрын
Exactly! AC reset should be done EVERY time you change the battery.
@pederhansen6483
@pederhansen6483 5 жыл бұрын
You forgot what was stated on the white sticker on the battery compartment , to make the AC reset!
@gabrielcornea9119
@gabrielcornea9119 3 жыл бұрын
17:54
@rubabhuss2791
@rubabhuss2791 3 жыл бұрын
@@gabrielcornea9119 The AC Reset didn't happen. The hands of the clock didn't move to 12.
@ekoaristama1572
@ekoaristama1572 5 жыл бұрын
You use the wrong battery. U should use SR927W. Dont use LR battery.
@TheBigDaddyClub
@TheBigDaddyClub 5 жыл бұрын
Eko Aristama wots the difference?
@jayserr
@jayserr 5 жыл бұрын
@@TheBigDaddyClub LR is 1.5v alkaline battery. SR is 1.55v silver oxide with constant voltage. LR has voltage drop which is not good for watches like Gshock.
@notorious408sj5
@notorious408sj5 4 жыл бұрын
He doesnt care its probably for a customer . Thats why hes not using those condom finger gloves
@jassemtaha9066
@jassemtaha9066 3 жыл бұрын
U r hero
@gordonbarnes6624
@gordonbarnes6624 Жыл бұрын
So i installed a new battery into my GW-1000 and touched the AC to any part, nothing happened. The watch face is set to 3.15. I tried touching the back of the metal face, the battery and nothing.
@JohnKevinBautista
@JohnKevinBautista 4 жыл бұрын
My comp, time, wt, stm, alarm dial isn't alligned or matched what can I do to make it reset? Thanks
@Inguise
@Inguise 5 жыл бұрын
I tried replacing the batteries to a local shop in my town, and they told me that once they open the watch it is comprimised, and it wont be waterproof anymore with 20BAR, it will only just be water resistant, I need some insight on this.
@Mbenzolovers
@Mbenzolovers 5 жыл бұрын
You need to change the oring its like 2$
@gabrielcornea9119
@gabrielcornea9119 3 жыл бұрын
you need to change the watchmakers too, because those are obviously incompetent liars
@UnderscoreTTC
@UnderscoreTTC 2 жыл бұрын
Find the right shop. Obviously he's lazy or not used to gshock
@freeatlast1963
@freeatlast1963 5 жыл бұрын
This video is very useful. I'm suprised Casio made it so tricky to remove/replace batteries. Why did they glue batteries in, so when you pull at them, the module comes out? I personally would avoid this model, just because the battery change looks over complicated.
@GiShockGo
@GiShockGo 5 жыл бұрын
freeatlast1963 this is the only watch I ever noticed the batteries having glue.
@Ark_alone
@Ark_alone 3 жыл бұрын
Thank you 🙏 💪😎
@garyguglielmi967
@garyguglielmi967 3 жыл бұрын
Brilliant
@roderickparado5730
@roderickparado5730 4 жыл бұрын
How did he manage to bring back the digital display after AC reset?
@BLACK72BLA
@BLACK72BLA 4 жыл бұрын
good afternoon, I have a protrek PRG 80 YT the functions are blocked and an OP EN message appears. I have already reset it but the OP EN message continues to appear
@lkkop
@lkkop 3 жыл бұрын
I didn't see the outcome of AC reset. Also i think you should use proper watch tools when doing this kind of work on the watch. Just my thought. Thanks!
@TheWheelofLife100
@TheWheelofLife100 5 жыл бұрын
Cheers,thank for this.
@GiShockGo
@GiShockGo 5 жыл бұрын
TheWheelofLife100 absolutely! Thanks for watching and taking the time to comment
@sumitsharma5179
@sumitsharma5179 5 жыл бұрын
The batteries that goes with Casio GA1100 are AG7 1.5v not CR-1220 3v as shown at the beginning of this vdo.
@GiShockGo
@GiShockGo 5 жыл бұрын
Sumit Sharma that's correct... i made a notation on the video. Also at the 10:15 marker you'll see the AG7 battery I used. Thanks for catching that and commenting. Cheers
@wanderfwd
@wanderfwd 4 жыл бұрын
I feel like that metal plate holding the batteries will fail after a couple battery changes
@dg_96_7
@dg_96_7 4 жыл бұрын
Can anybody help me? When I turn on the backlight my digital numbers in my watch go blank , its only when I tilt my watch a little that I’m able to see the numbers on display. It’s annoying cause when I need to see the time in the dark it just shows the green backlight only. Do I need a new battery? I’ve never had problems with this watch , had it for 8 years , never changed the battery. Could that be the issue?
@GiShockGo
@GiShockGo 4 жыл бұрын
Dg_96 _ it’s definitely the battery. That’s one of the signs the battery is drained.
@dg_96_7
@dg_96_7 4 жыл бұрын
Gi-Shock-Go thanks for the quick reply thank you!
@BigAlsBilliards
@BigAlsBilliards 5 жыл бұрын
Very good, but your ac reset didn't work the way you did it.
@adamski101
@adamski101 5 жыл бұрын
It doesn't look robust enough inside to take too many battery changes!
@hemandestroyall
@hemandestroyall 3 жыл бұрын
You forgot to touch the battery with a tweezer for 3 sec to make negative contact before closing.
@manuelavila1958
@manuelavila1958 5 жыл бұрын
Do you do repairs...
@GiShockGo
@GiShockGo 5 жыл бұрын
Manuel Avila some... What's the issue?
@manuelavila1958
@manuelavila1958 5 жыл бұрын
I purchased the watch broken, all i know is the arms are bent.
@GiShockGo
@GiShockGo 5 жыл бұрын
Manuel Avila what model is the watch?
@manuelavila1958
@manuelavila1958 5 жыл бұрын
@@GiShockGo 5441 ga 1100
@manuelavila1958
@manuelavila1958 5 жыл бұрын
hello???
@drew5992
@drew5992 8 ай бұрын
You should wear gloves!
@TheAbdi1910
@TheAbdi1910 4 жыл бұрын
not done yet your watch can't working properly and u did't press the botton light or any botton after u reset,so I can say your watch got damage
@Hisamudheen
@Hisamudheen 4 жыл бұрын
am i the only one who laughed .. lol
@saheedibraheem3467
@saheedibraheem3467 5 жыл бұрын
Re u sure,you re professional.you use bare hand to remove battery instead of tweezer
@GiShockGo
@GiShockGo 5 жыл бұрын
saheed ibraheem wouldn't consider myself a professional but although recommended, you can use bare hand while removing the battery. Especially if you remove static before touching.
@MikesMobileCarWashandValeting
@MikesMobileCarWashandValeting 5 жыл бұрын
20 mins to change a battery. 😜
@95lovi
@95lovi 3 жыл бұрын
Not bad needs a little bit of training the right tools, tweezers. And a bit more focus on the single steps
@sequen-cielscientific
@sequen-cielscientific 3 жыл бұрын
We are far from Swiss watches and everything seems made of plastic and recycled! Very nice watch but it's plastic Japanese.
@e28forever30
@e28forever30 2 жыл бұрын
Swiss watches are overrated.
@danbodroid
@danbodroid 5 жыл бұрын
16 people failed to change the batteries.or they bought knock offs.lmao.
@GiShockGo
@GiShockGo 5 жыл бұрын
Hermes Hidayat lmao... Were the instructions that bad?!
@danbodroid
@danbodroid 5 жыл бұрын
@@GiShockGo omg of course not.you did a very good job.and since people disliked so i suggested they failed in replacing the batteries or they bought knock offs xD
@CONCRETEJUNGLE-be6ic
@CONCRETEJUNGLE-be6ic 5 жыл бұрын
@@GiShockGo Your instructions were perfect one down....Now I got 15 watches to go.
@elvischew1758
@elvischew1758 4 жыл бұрын
he is not using tweezers
@mieza98
@mieza98 4 жыл бұрын
Too much mistake and on sequence.no AC reset is a bad thing. And no proper tools like twizzer to reset it.sorry
@hemandestroyall
@hemandestroyall 3 жыл бұрын
Next time use a tweezer!
@TK42715
@TK42715 4 жыл бұрын
this was actually painful to watch...
@andrewkon
@andrewkon 3 жыл бұрын
Don't put your unpritected module hands down like an amateur!!!
@larchegeoffroy7513
@larchegeoffroy7513 4 жыл бұрын
Voleur ma montre rend la
@여름은싫다-f5u
@여름은싫다-f5u 5 жыл бұрын
too much talker.
Whats inside GA-1000 series G-Shock watch
13:32
gshock highfashion
Рет қаралды 22 М.
Will A Basketball Boat Hold My Weight?
00:30
MrBeast
Рет қаралды 143 МЛН
Trick-or-Treating in a Rush. Part 2
00:37
Daniel LaBelle
Рет қаралды 23 МЛН
Perfect Pitch Challenge? Easy! 🎤😎| Free Fire Official
00:13
Garena Free Fire Global
Рет қаралды 60 МЛН
CASIO GA-1000 Replacement CENTRAL Analog Block
31:10
Комарик Дружелюбный
Рет қаралды 35 М.
Casio G-Shock GA-1100 Battery Replacement
14:54
Everydayhack
Рет қаралды 4,5 М.
Will A Basketball Boat Hold My Weight?
00:30
MrBeast
Рет қаралды 143 МЛН