How To AC Reset After Battery Replacement G-Shock GA-110 Watch | SolimBD

*How to Perform an AC Reset After Battery Replacement: G-Shock GA-110 Watch*
*Introduction*
This guide provides step-by-step instructions on how to perform an AC (All Clear) reset on a G-Shock GA-110 watch after replacing its battery. This process is necessary to restore proper functionality and display accuracy in cases where the watch's display malfunctions or displays incorrect information.
*Identifying the AC Reset Hole*
1. Remove the watch's back cover to expose the watch's movement.
2. Locate the reset hole, which is typically marked with the letters "AC."
*Performing the AC Reset*
1. Using a suitable tool, such as a toothpick or a reset tool, gently press and hold the AC reset button for a few seconds.
2. Observe the watch's display to ensure that it has been successfully reset.
*Battery Replacement*
1. If the battery needs to be replaced, carefully remove the old battery from its compartment.
2. Insert the new CR1220 battery, ensuring proper polarity (+ and -).
3. Replace the watch's back cover securely.
*Conclusion*
By following these instructions, you can successfully perform an AC reset and replace the battery on your G-Shock GA-110 watch, restoring its functionality and display accuracy.

[@Codog2009]

Juat got a quote to replace battery at shop. $45 w 30 day warranty or $55 w 5 yr. I said no and order 4 batteries for $7. Your video was clear enough for me to see and get the job done. Thanks tons!

[@SolimBD]

Nice work!

[@Audiofreakster]

haha, yes this is to easy to pay a clockman to charge insane prices for something this easy. Its easy, easy easy.

[@SolimBD]

Thank you for your feedback.

[@ilovealbundy]

Thank you very much for this excellent video! It really helps me when I have to change the battery in my Casio watch. I didn't know that the watch has to be reset afterwards.👍

[@SolimBD]

I'm glad the information was helpful! Casio watches don't all require a reset after a battery change, but some G-Shock models do. If you have a G-Shock, you can usually find instructions for resetting it in the manual or online. The reset process typically involves using a small tool to press a button labeled "AC" on the back of the watch case.

[@ilovealbundy]

@@SolimBD Thanks for the explanation.

[@jerstolp1]

Great clear vid. I noticed at first ur movement was slightly off center n then u turned it n I was like yup 6 marker was at like 631 lol. Then u cut n i could tell immediately u set it back in perfectly.... I have noticed its kinda easy to accidentally skew it a little.. But i know once u get it back right it sets in perfect n don't "pop up". For anyone if u take it out on purpose or accidentally set it in straight n gently push it in. Then use tweesers to push in the 4 button contacts a lil 1 side at a time (ie do left 2 then right 2 or vice versa) n it will go right into place... No biggie Oh and while you're in there is a good time to make sure none of ur e rings (c/e clips)that hold the buttons in have came off the button stem lol.. If so have fun lol most time there inside so carefully look for them use Tweesers n cots and or rodico n carefully replace them.. Caution try not to let em go flying or just drop them. Shit sometimes there right in front of you n still dissappear lol there only 2mm... There's vids for replacing em.. Also if u loose em good luck finding replacements.. I contacted Casio n they sent me to the east coast n west coast center for parts and their discontinued... U can find em on ebay but all I found were from United Kingdom. U may be able to buy a set of a couple hundred of all different sizes starting at 1.5mm then 2mm then 3 n so on n hope they fit.. The kits are like t 10 bux Or better if u are missing clips n have a authorized Casio repair place save urself the headache n take it in lol Shit also the E ring (c/e clip) are all the same size among ALL casios with buttons.. So if u have a junk 1 or a cheap 20 dollar one u can scavage it for the clips 1 more tip at 419 in u see a lil spring above the S and I of Casio don't loose it... It's a HUGE Pita to find.. So careful when taking back off n turning it over whit it off. If u loose it it's not the end of the world you're watch just will not have sound

[@victorramosmiranda9891]

I had no idea where the lil spring went until now 🤗I need to go back in there

[@27grgr]

Thank you. Great job

[@SolimBD]

Most welcome

[@chazmuska]

OMG thank you! 🙏🙏

[@seRJota21]

Thank you!

[@marcjomini8281]

Thank you. Saved me from throwing the watch away!

[@SolimBD]

Most welcome

[@samuelmunoz1464]

I changed my own battery then went swimming and water got in my watch 😔

[@SolimBD]

O-Ring set properly?

[@02shredder]

This is a great quality video very clear camera work way better than some of the garbage out there.

[@TheShamwari]

Same fiddly hook for the battery, as my Canibal watch which is now on its. second battery after purchase in 2016. I have a problem with resetting the AC (alternating curent), Last time I did not have to do so, thus thanks for the istructions.

[@SolimBD]

Thanks

[@shiftymg3590]

You helped me a lot bro. Thanks

[@SolimBD]

Glad I could help

[@MrKenny777]

Very helpful video. Thanks my friend.

[@SolimBD]

Glad it was helpful!

[@renatocosta_spbrasil]

Parabéns pelo vídeo

[@SolimBD]

Thanks for comments

[@rubimdevim1005]

great work bro and thankyou for this video🙂🙂🙂😊😊

[@SolimBD]

Thanks and welcome

[@user-hd8ej8yx9p]

The AC reset is at 3:30

[@normalguy7898]

Thank you

[@SolimBD]

You're welcome

[@IchbinJohannNibhcI]

thank you

[@SolimBD]

You're welcome

[@ThreeSixtyDegreeMe]

Good work.

[@colinbong2771]

Great tutorial

[@SolimBD]

Thank you! Cheers!

[@artem_kirichenko]

Спасибо за видео! Очень помог! Привет из России!

[@SolimBD]

Thanks for watching

[@oisinogorman35]

Is it necessary to use plastic tweesers when installing the battery? As to not short circuit the watch?

[@jerstolp1]

No

[@frankiemckinney5478]

Yo I just did that to my watch but I lost little round sticker if I don't put that sticker back over the battery is it going to ark with the back or anything?

[@SolimBD]

Striker use for battery safety issue

[@frankiemckinney5478]

So I need to put some sort of sticker over it or is the sticker just there to tell me how to reset it

[@jennyklyon8671]

I am totally blind from birth and have a talking atomic watch. So this video is very interesting to me. Jeweler re-initialized my watch before they gave itback to me. From this video, I've learned sighted people need this, too. The way mine is re-initialized is - press one of the buttons until you hear it spin; make sure all hands are at 12:00 position; set time zone. After each of these steps, you need to wait until hands stop spinning. The AC reset sounds like a pain in the ass to me ...

[@chocol8tsundae]

A voice over would be helpful

[@banmike3043]

How do i fix the backlight not working?After I changed the battery for digital the backlight on digital not working I already circuit the AC and all was working the digital, sound but the backlight wasn't working.

[@shockey4n1]

I'm having same issues someone please explain!!

[@SevenSixTwo2012]

You probably put in a cheap brand of battery or an expired battery that doesn't have a full charge of 3.30 V. This would explain why some power-intense features such as the backlight are not working.

[@user-ky5qc1rb5c]

why need reset? after cell replacement sound not working😢

[@SolimBD]

Check alarm connection

[@kingsgshocktv4561]

What should i do ?

[@kennethsellar5485]

Does a G shock lose its waterproofing once you open the watch to change a battery

[@djYuz]

Depends on the gasket condition. If the gasket's still in good condition (and it usually is on a G-Shock), you can put a bit of silicone grease on it (it doesn't take much), seat it and it'll be fine. If you want to be really safe (or if the gasket is broken/bad condition), you could get a replacement online, lightly grease, and install it.

[@RizztrainingOrder]

Should’ve watched this in time before disassembling then being shocked to death due to not having and using Trojan minis readily on hand

[@rueldumagat1959]

WHAT DO YOU CALL IN THE PLASTIC LIKE COVER OF THE MACHINE?

[@N269]

What the clear plastic that you see thru? Normally the "crystal", but not sure on these digital watches.

[@frankiemckinney5478]

Do I need to put the sticker back over battery or notm.i lost mine!!! Is it just to tell you how to reset since the instructions are on there

[@seatechconsulting9923]

Sticker is not mandatory but to remember every replacement

[@terradisud166]

After changing the battery is it still waterproof?

[@jasonli5023]

as long as the o ring is in the right place you are good to go

[@jennyklyon8671]

If everything is connected okay and the O rings are attached well, it should be.

[@timeconstrained2400]

what does ac(-) mean?

[@SolimBD]

AC (all clear) / - negative connect

[@chalu632kampakhndi]

Kitne ki hai btry

[@baladinbaladin2549]

Witch the publicity in nederland??with

[@kingsgshocktv4561]

Ive change battery but there is no light ?

[@shavraynes6660]

Same problem

[@tossaponpiantanakulchai4036]

What happens if not doing reset procedure?

[@SolimBD]

After reset clear all old memory

[@marcjomini8281]

watch doesn't work

[@stateniland]

if I don't have tiny tweezers could 2 straight pins be used as long as they touch when re-setting?

[@BB-re6nz]

I used a clothes pin

[@stateniland]

@@BB-re6nz wood? has to be metal no?

[@HazelBrown__]

My partner recently got the battery replaced in his G Shock Mud Master and now it won’t calibrate to the correct time, setting it to our city London and it’s hours out. Any advice? Thank you!

[@SolimBD]

GG-1000 Mudmaster?

[@HazelBrown__]

@@SolimBD GG-B100-1A3ER

[@Maxumized]

What is the purpose of resetting?

[@SolimBD]

Reset for data clear

[@cheesesyrkyer5290]

Dam i broke the metal clip behind the battery

[@charliemendez1479]

What happens if it not reset?

[@SolimBD]

Reset (data clear)

[@buddydaddy3722]

What mm screwdriver?

[@SolimBD]

Phillips 000, PH 000

[@buddydaddy3722]

Thanks man

[@scheimong]

PH000 was a bit too small for my liking. PH00 felt right.

[@seatechconsulting9923]

Thanks By the way SolimBD means what?? BD is Bangladesh

[@SolimBD]

Yes Bangladesh

[@seatechconsulting9923]

Are you Bangladeshi??

[@SolimBD]

Yes

[@seatechconsulting9923]

Great jajak Allah

[@SolimBD]

Thank you so much

[@mofijulislam2007]

My G-shock GA-110 watch digital working but analog not working.. what is the problem???? please reply 🙏

[@SolimBD]

I don't know, maybe battery power low

[@mofijulislam2007]

@@SolimBD thanks for your information man 🙂

[@edgarphil]

@@SolimBD my gshock cannot work together the digital and analog. Once i reset the digital, the analog has its own differ time

[@lazarilic3304]

@@edgarphil you should change the battery because that's the reason which led to the problem u mentioned. Anyways you have the solution for that on E-44 of your User's Guide :D

[@edgarphil]

@@lazarilic3304 I found the way to set the time, thank you anyway 👍

[@UltraLimitedHD]

Muted...

[@chalu632kampakhndi]

Battrey no kya hi

[@SolimBD]

CR1220

[@chalu632kampakhndi]

@@SolimBD battery pp kya hai

[@leizygatos7139]

HOW TO RESET FOR 2 sec @ 3:40

[@johndurante2322]

Okay!! I pulled everything out of my G shock and you don't need those darn finger condoms. My watch works perfectly fine without protection

[@jerstolp1]

Need them no... But every watch repair person or watch modder worth his salt will wear rubber gloves or finger cots.. There is nothing worse especially when pulling the whole Movement out than accidentally getting a fingerprint on the inside of the crystal or on the face of the watch.. And although generally not needed for a battery change it doesn't hurt to keep ur greasy fingers off of all contacts no matter how Clean u are ur going to leave a print.... I don't want anything getting inside when I do watches cots or latex or whatever gloves always when working on watches............... If u don't use ur not a good watch repair person

[@redzhang4819]

Hi mate. I think your AC ret was not right. You should have contacted AC with (-) but you actually contacted AC with “CA(SIO)” 😂

[@578morgan7]

😝😝😝

[@alpendz8105]

what is AC?

[@SolimBD]

If the display on your digital watch is not working or not showing the correct display then it is likely that the watch needs to be reset. If you remove the back again, you should see some indication of a reset hole on the watch's movement. This is sometimes marked with the letters "AC" (All Clear).

[@alpendz8105]

@@SolimBD thanks man

[@glenben9125]

Cool but Useless mod. Who need a gun that take ages to deploy

[@motoraktvvlog6627]

Why need to reset

[@SolimBD]

AC (all clear)

[@samnedev7832]

I don’t have a cr1220

[@jjsc4396]

Oh my God, PLEASE…..Stop with the music!

[@udayhema9098]

how to do reset ..im fully confused 🙄

[@travishamilton9732]

Turn Battery over to bottom side (NEG) Touch The bottom and side of Battery with tweezers or small pliers Then put back in watch. You will know if it hasn't Recent all The numbers won't Read properly.

[@udayhema9098]

@@travishamilton9732 thank u so much 🤩❤️

[@travishamilton9732]

No worries 👍

[@perthpickers8851]

Would be nice if you actually spoke and explained it?