G2 Ergonomics 4 Stroke Throttle Installation

  Рет қаралды 43,429

G2 Ergonomics

G2 Ergonomics

Күн бұрын

Пікірлер: 34
@devaplan
@devaplan Жыл бұрын
I have just fitted one to my 2015 Ducati Scrambler. These are notorious for having snatchy throttles. It made a very slight difference but its only really a sticking plaster fix. The real cure is a dyno remap for the fuelling, which is scheduled. The throttle is now much smoother than stock due to the Delrin bushes but it is a slightly sloppy fit on the bars. I fitted new Oxford Fatgrips as the stock grips are a bit thin and had to be cut off anyway. I slid the new grips on using water based lube. There should be no need to glue them on as when the lube dries they don't slip.
@jemirandav
@jemirandav Жыл бұрын
What model fit the SSR-300? It is has a very similar housing of the Honda but only ha one cable. Thank you in advance.
@sanchob1635
@sanchob1635 5 жыл бұрын
So does it work with regular aftermarket hand grips? Can I slide them over it ?
@mxmotocrossslovenija5471
@mxmotocrossslovenija5471 4 жыл бұрын
yes broo good gass
@feretimua3642
@feretimua3642 2 жыл бұрын
Can u supply the throttle housing n tube...i needed those
@kahlilbennett1472
@kahlilbennett1472 4 жыл бұрын
I am trying to install my cables and I don’t have enough slack, any thoughts? Thanks.
@tonithompson9086
@tonithompson9086 7 жыл бұрын
I assume this G2 throttle tamer won't work with the Emig lock-on grips since the lock on grips have their own tube?..Right?
@TheCodesterr
@TheCodesterr 7 жыл бұрын
I'm wondering the same thing. I have a KLX110L and need to replace the throttle and grips... and want lock on and this tube.
@G2Ergonomics
@G2Ergonomics 6 жыл бұрын
@@TheCodesterr Sorry for my late reply. No, our G2 throttle tubes do not work with lock-on grips.
@weelyguy123
@weelyguy123 7 жыл бұрын
Do you need to put any Greece or anything under the throttle tube
@dirtgarageman
@dirtgarageman 6 жыл бұрын
Connor no
@G2Ergonomics
@G2Ergonomics 6 жыл бұрын
Sorry Connor, if you still have the tube let us know. Email on the website. www.g2ergo.com
@mxmotocrossslovenija5471
@mxmotocrossslovenija5471 4 жыл бұрын
i have it on my yamaha and very pleased never the original
@gkling33
@gkling33 2 жыл бұрын
Constructive criticism: your hands were in the way of alot of the removal and reassembly steps. We might as well be listening to this how-to on the radio...can't see.
@mikeychavez4262
@mikeychavez4262 7 жыл бұрын
I installed it the same way and I'm 100% sure I did it right but the tube just gets stuck all over the place
@MotorcycleRebuilds
@MotorcycleRebuilds 3 жыл бұрын
It’s might be your throttle cables, they could have gunk in them.
@mikeychavez4262
@mikeychavez4262 3 жыл бұрын
@@MotorcycleRebuilds it was because I over tightened the throttle housing
@MotorcycleRebuilds
@MotorcycleRebuilds 3 жыл бұрын
@@mikeychavez4262 that’s good to know thanks for the update and so quick too!
@simsatvrepair1255
@simsatvrepair1255 5 жыл бұрын
They show you how to do this shit on video but hide how to put the dam cables back throttle tube to where you can see which cable goes into which holes so wtf is the point of showing a video on how to install a throttle
@ronanrogers4127
@ronanrogers4127 5 жыл бұрын
That’s not difficult to figure out. If someone doesn’t know that they probably should think about whether they’re capable of doing the installation.
@simsatvrepair1255
@simsatvrepair1255 5 жыл бұрын
Ronan Rogers id rather do it myself than pay out the ass for some one else to do it an if you don’t know how to do it that’s what they have a video on how to do it asshole but what is the point when the idiot has what he’s doing blocked from the camera I also tore my bike to nothing but the frame an built back to what it is now a fully rebuilt bike so I know I’m capable of doing it myself but thanks for your input that I didn’t ask for
@Ty-no8lj
@Ty-no8lj Жыл бұрын
2 cables. Figure it out snowflake.
@simsatvrepair1255
@simsatvrepair1255 Жыл бұрын
@@Ty-no8lj fuck you bitch ass clown the whole point of a video is to walk someone through how to do it not half ass show it to figure it out if I have to do that then why do a video you pussy
@simsatvrepair1255
@simsatvrepair1255 Жыл бұрын
@@ronanrogers4127 that’s no the point you dumbass
@Lightnin42
@Lightnin42 Жыл бұрын
Best throttle tubes
@andresgalleguillos8698
@andresgalleguillos8698 2 жыл бұрын
Great video, if I wanted to see how hands move during installation...🤣🤣🤣🤣🤣🤣🤣🤣🤣
@maxpowers13
@maxpowers13 Жыл бұрын
nice camera placement...lol
@thisguyeddiex7136
@thisguyeddiex7136 2 жыл бұрын
Too bad you guys don’t show how to glue the stupid grips on …. Not gonna lie I’m pretty pissed. I Spent 140 bucks on this throttle just to glue the shit out of it and ruin it. I hardly used any glue and it seeped under the bushings and glued them up
@omshanti2529
@omshanti2529 5 ай бұрын
Can't see what he's doing cause his hands are in the way. Film from above next time.
@林道中毒
@林道中毒 2 жыл бұрын
日本では買えないようです。
@twistedthrottle8513
@twistedthrottle8513 6 жыл бұрын
what the fuck is it good for , gust a gimmick
@Evil_Morty2000
@Evil_Morty2000 6 жыл бұрын
Go BIG or go home idiot
G2 Ergonomics Motorcycle Throttle Tamer
4:27
Rocky Mountain ATV MC
Рет қаралды 8 М.
Installing a G2 Throttle Tamer on a CR250r
15:01
Johnny Rides
Рет қаралды 10 М.
Their Boat Engine Fell Off
0:13
Newsflare
Рет қаралды 15 МЛН
How To Smooth Out The Throttle On Your Z900rs!
8:48
Southern Distance Moto
Рет қаралды 7 М.
"Jerky" Engine? Not a problem anymore!
5:05
Moto Control
Рет қаралды 105 М.
Can G2 Ergonomics Throttle Tamer Fix the Honda CRF450L's Problem?
3:50
Progressive g2 throttle install
11:34
Team 2 Gils
Рет қаралды 2,5 М.
250 2 STROKE VS. 250 4 STROKE
15:03
Ash Sowman
Рет қаралды 508 М.
Racer X Films: How to Service a Dirt Bike Throttle Tube
5:35
Racer X Motocross & Supercross News
Рет қаралды 112 М.
G2 Throttle Tamer review: good for two strokes?
3:36
Cross Training Enduro
Рет қаралды 48 М.
How to change the throttle tube | throttle sleeve  - throttle housing on a DRZ400 using motion pro
4:26
RWWRENTAL Colorado ATV Dirt Bike Rentals
Рет қаралды 19 М.