G290RC GOPED SUPER XPED SIKK TOYS PIPE (start up) & ENGINE TRIX AIR SCOOP

Currently 2hrs on the engine and almost 1 full tank thru it. I added the sikk toys pipe and chrome fan cover with rare engine trix air scoop! Looks sweet it runs much better throttle response is crazy and all around more power thru the entire RPM range this pipe is essentially and engine trix made by sikk toys products, it hits the same way its got 3 stages of powerband and if tuned right u can even hit a 4th at high RPM its a great pipe for power across the whole rpm range. I also have just the bigger spacer on the manifold and loving the way the power hits so far. 🛴💨

[@charlieryan1736]

Looks and sounds amazing 🤘🏻

[@JesseK410]

Thanks I appreciate it! Brapp

[@Gopedhitta954]

Been watching your videos for the past few days i forgot to sub so i did so today! Im building one now!!!

[@JesseK410]

Thanks dude appreciate the sub..what you gonna be building a super x ped?

[@Gopedhitta954]

@@JesseK410 my next project probably be a yamaha banshee im in the market for one

[@JesseK410]

@@Gopedhitta954 oh hell yeah thats what im talking about haha. Them things ripp ive ridden a few in my life and nothing like the sound of the twin pipes

[@Gopedhitta954]

@@JesseK410 i know amazing sound !!!

[@AzucenaNsean]

@@JesseK410 thanks for sharing your tricked out Goped it’s sick! Anywho I am in the market for a new engine. I have the g230rc and wanted to get the best most powerful engine what did you recommend I notice you have the g290 and it’s not bored out are you going to do that eventually? Thanks for your help

[@jeffersonho6886]

Im starting to get into these gopeds and I got a geo sport (least favorited model but it was free) and I was thinking of upgrading my spindle to a .750. Is there a major difference and should I go with black magic even tho u mentioned they eat up the tires? I’m tryna go for top speed rather than torque. I live on a hilly area (San Francisco) so I’m prob not gonna go with an .800. Maybe down the line I’ll do an engine swap where ill have to relocate the gas tank to the right side but for now ima stick with the stock geo.

[@JesseK410]

Sweet! Glad to hear it. I like all the GoPed models...🤟🏼🤟🏼🇺🇸 The BM are great because there aluminum and they dnt wear out. Only down side is yeah they wear the hard tires down hella quick. I would say as long as ur okay with changing the rear tire more often than go with the black magic. Its not that bad tbh. If you run the .750 you wont have to pre wear out the tire like i do with the .850 If you can still get the black magic ide grab it up there harder to find in certain sizes.

[@americasbestfails3741]

Rich is best man, I see so many people with high and the low set way to lean

[@JesseK410]

Definitely! Totally agree better safe than sorry

[@americasbestfails3741]

@@JesseK410 That’s right huh I’d rather replace the spark plugs and a piston and cylinder all day

[@JesseK410]

@@americasbestfails3741 yeah same here. There pretty easy to dial in and just gotta check the plug to see exactly how its running you want it a nice coffee brown color! 👍🏼 i also run 32:1 but some people run 28:1

[@jasonvee8389]

Is your exhaust bracket longer? I have an ada s1 pipe saw yours has alot of clearance? You using some type of extender?

[@JesseK410]

Its stock length on the bracket, just made that extension bc with the clutch kit it sits further over obviously. Custom extender haha

[@Steez510]

Had a new tire on my .950 spindle running a OBR case reed full mod 30.5cc 8.2hp motor. With beed lock rim ofc. But tire RIPPED off top speed lucky didnt eat sh*t. But lil cracks in the tire like that not worth the risk. Id change it.

[@toonsszn8418]

What’s top speed

[@JesseK410]

Haha right its so sketchy without the bead lock wheel i have them sitting in my crib just haven’t put them on yet im still running these wheels there coming off real when i change the front forks to V brake. Thing is hairy w the suspension forks and no bead lock lol its all over the road at WOT! 😂

[@JesseK410]

@@toonsszn8418 top speed is 40mph at 17,400 rpms with the black magic.850 spindle for 3rd bearing support although i took off the 3rd bearing for less rotational drag..thing flys im 130lbs so that plays a roll in how fast i get these small bore engines going..

[@Steez510]

Yeah and im around 40-43 mph too and no BS seeing your wheelie video gave me motivation to try to wheelie my ped. And the OBR power band is just way to strong bro case reed no joke no bog no lag. It through me off I hyperextended my right legg and snapped my knee and tore my calf mussel im down for a while....

[@tankh3adtd22]

Goped rideout?

[@kaitanaka3468]

Do you know the dba (decibels) with and without the silencer? Thanks.

[@JesseK410]

Honestly i do not, i wish i did cuz i would for sure let ya know buddy..i need a meter to gauge it i guess.

[@kaitanaka3468]

Thanks. Rn I got a G23lh on my ped and I’m thinking of putting a sikk pipe and a ddm silencer on it. My buddy’s got a g290rc on his so I know how loud it is. For you, was it louder with the stock exhaust or with the pipe and silencer? Thanks

[@JesseK410]

@@kaitanaka3468 for sure louder with the pipe and silencer

[@kaitanaka3468]

Ok thanks

[@hunterburch2675]

Can you pull the handle bars off on the stock sport stem? I took the bolts out and whacked it a few times and they still didn’t come loose

[@hunterburch2675]

Also I just bought a chrome CY29RC engine with a mid bleed pipe and silencer, air filter, and BM 750 spindle. I’m 185 lbs what do you think my top speed will be. And tips on breaking in a new wngine

[@JesseK410]

Yesir you can take it apart the FTG are usually just stuck on…you could probably hit 34-35mph ide say no prob

[@hunterburch2675]

@@JesseK410 FTG??

[@JesseK410]

Thats what the piece is called

[@hunterburch2675]

@@JesseK410 right on thanks for the help brother

[@jrnycg3589]

Are these two strokes?

[@JesseK410]

Yesir!! 🤟🏼🤟🏼

[@jrnycg3589]

That’s beautiful

[@JesseK410]

@@jrnycg3589 thank you my friend, appreciate that!! 👊🏼😃

[@jetlo989]

How do you get it to stay on with only push starting it?

[@JesseK410]

What do you mean? How do i get it started on the stand with the Scoop?

[@jetlo989]

@@JesseK410 yes on the scoop, cause I don't have the pull start to start the engine I can only push the goped to start it thats why I ask thanks

[@JesseK410]

@@jetlo989 yeah so what i do is push start it and then just slow down an lift up the whole goped an put it on the stand its not to bad bc the thing starts really easy but after i broke the engine in i took off the pull start cuz i dont usually need to start it on the stand anymore

[@jetlo989]

@@JesseK410 ok cool I'll try that hope I don't trip lol thanks

[@JesseK410]

@@jetlo989 just be careful lol and your welcome. 👍🏼

[@brycejones2076]

Are you any of your gopeds for sell

[@JesseK410]

Currently none for sale, i been having to much fun tinkering with them. If i do plan to sell any I’ll definitely make a post on my instagram or possibly a video

[@danyal4378]

Can you push start it with all goped engines

[@JesseK410]

Most GoPed engines are push start but you can make them pull start if you put a clutch kit on, other than that the chain drive models are not push to start like the GSR for example is not push start..hope that helps!

[@danyal4378]

@@JesseK410 but what if it has a pull start that mean I can't push start it

[@danyal4378]

And what about the go ped big food is that pull start or can you push start

[@JesseK410]

@@danyal4378 both

[@danyal4378]

@@JesseK410 ok thanks for your help

[@Body_Dropped]

What motor mods you got in it

[@JesseK410]

Currently as of today Zenoah g290rc Ada tall intake manifold Ufo filter Bartolone v2 v-stack 990 walboro carb Ada s1 pipe Ada o-ringed exhaust manifold Black magic.850 spindle ESP high rev lightened piston 5.5 duration Raised compression with the smallest copper gasket I believe its (0.15mm) No porting yet

[@AzucenaNsean]

@@JesseK410 where did you buy your hour meter? And I’ve had my 850 spindle for over 10 years and notice the spindle is smoothing out. Should I grab a dermal and make the lines again or just buy a new 850 spindle?

[@JesseK410]

@@AzucenaNsean yeah that happens over time. Thats why i run the aluminum black magic spindle VS the stainless steel ones that wear out really quick. Impossible to find the black magic spindles in .850 now unless there preowned. They haven’t been in stock for a wile now. I keep checkin DDM but they never have the .850. Luckily i already got one but im looking to get one for my bigfoot now.

[@JesseK410]

@@AzucenaNsean I wouldn’t do that but i guess you could try it an see what happens..im not sure if it would help because whats actually worn off is almost like SS grip tape its not engraved into the spindle yaknow..

[@JesseK410]

@@AzucenaNsean oh sorry forgot to mention where i got the tachometer. I got it off ebay. The essentially all the same i just went with this one bc it said racing on it it haha

[@2strokelife57]

where can i buy a frame sir an a motor an make it m,ey aself sir

[@JesseK410]

Probably ebay i would think is gonna be ur best bet.

[@tankh3adtd22]

I want to ride with you

[@JesseK410]

Hell yeah im from Massachusetts! Lets ride brappp brappp

[@yourpapi8489]

You interested in selling it

[@JesseK410]

Not interested in selling it, i have owned this sense the day it rolled into my local hobby shop! I purchased this with my dad as a kid its got to much sentimental value to me at this point i dnt think ill ever get rid of it..sorry my friend. Theres a bunch on Facebook and also check out the fb group “GoPed Nation”

[@donnydarko1898]

I don't like spindle drives nice scoot though

[@JesseK410]

Yeah personally i think chain drive is better but the only hard tire thats chain drive is the GSR sport and i dnt have one so unfortunately for me direct drive it is 😂🤘🏼 the only good part about a spindle is you dnt gotta worry about aligning the chain perfectly or sprockets or adjusting the chain. Pros and cons of both i guess. I love them all!!