G5n: Introduction

[@chase78221]

Just ordered mine today!!!! Can't wait!

[@thesocialartsclub9095]

Dedicated 4 knobs for each effect is what sets this apart.

[@Santi-pm9hq]

I think that a new firmware update can solve the looper problem (or looper request) and add a IR loader so you can load a few impulses. This unit may be better. The community would not mind updating the manuals if they provide a better product.

[@roberth7399]

I'm simply I ordered one. I just need a kick ass metal tone and clean patch . I hope this delivers a good metal tone

[@lowbatt3235]

how did it do?did you get the tone you were looking for?

[@joliszin143]

Exactly the same necessities, how is it?

[@Irudium]

People, it djents ;D

[@WaqarMalikGuitarist]

Its amazing. I have it and on my channel u can check videos using the zoom g5n

[@roberth7399]

Sorry I'm late, but I'm happy with this unit. Easy to set up watching you tube tutorials. I'm simple just needed a metal tone and a clean setting. This unit has way more options than i need but you'll be happy. I use it through my clean channel on my amp and sometimes through effects loop.

[@SomeTimeGuitarist]

Zoom should have made the Looper a Global parameter, but they have made it local to patches, this is the biggest drawback of this unit, you cannot change patches while on a loop. Also Zoom states 9 effects can be used at once, however if you use Amp Simulators and Reverbs it runs out of processing power anywhere between 5-6 effects after which it states "Overload". Zoom should have added a little more processing power to this unit. Apart from these shortcomings which is quite annoying the unit is quite good.

[@SomeTimeGuitarist]

I have uploaded a Loop Sample on my Channel where you can see me playing over a loop which i created on the Zoom G5N, all sounds were from Zoom G5N recorded via USB, there is also a video of me playing over a backing track with Zoom default patches.

[@SomeTimeGuitarist]

I have uploaded a Loop Sample on my Channel where you can see me playing over a loop which i created on the Zoom G3X, all sounds were from G3X recorded via USB, the difference is on the G3X you can change patches while looping, which cannot be done on the G5N, which is a shame.

[@Keitan97]

I was wondering the same thing.

[@batmandeltaforce]

Glad to hear that, I almost bought one, but no thanks for that crap looper.

[@brianjenkins5973]

SomeTimeGuitarist Dude I agree with you. Also you would think zoom would of thought about these enoying issues.

[@colindias4820]

I'm really glad I decided to go with the zoom G5n .. this tones are really good and you can feel it come out when you play a rhythm or a solo.. I don't know how it compares to a line 6 or headrush pedal but goin through their demos and videos it sounds really close ..... A few amps and cabs but they all sound so damn good .. hope u guys at zoom r working on a new one and come out with it next year cos that would be awesome and I would buy it .. some sort of talk box feature .. changing patches when using the looper and drum machine .. maybe a mic input .. so u don't have to connect it to a mixer with a few effects for it .. otherwise the unit kicks ass .. big time ..

[@MobileDecay]

I need to upgrade the memory in my brain to remember this. Lol.

[@mesinbubut]

very very very falling in love with this unit, i can nail some modern metal/djent tones with easily wether into front amp - return amp or direct to PA , thanks for the recti orange and the gold drive it so essentials; maybe next amp and cab are the 5150

[@severalpaperclips]

If it had balanced XLR output for going direct, it would be a great product.

[@vamsimnath111]

I purchased a G5n and i like the tonality of the processor it really have some powerful patches and some interesting clean tones too... And the only drawback I've flet on this device is that i doesn't have a i dependent looper section, loops are also added to the patch session.. Even though it's not that big issue but zoom would have to provide a separate independent menu for loppers... Otherwise its worthy for money... I'am a satisfied user.

[@hifly1929]

Are there other pedals that have a looper that works well? Im just starting out. want to get this one. besides having differents effects available on the footswitches I also would like to learn how to loop and make my own base, rytm lines etc. I would like to keep it on a budget (sort of). Would this unit work well enough or is a dedicated looper pedal a must?

[@disappearingismything1551]

@@hifly1929 I was just tryin to ask the same questions about the looper... for me im planning to use it on my keytar

[@colindias4820]

Would it be possible to get a drop down global tuning in the next zoom ..?

[@jonafat99]

I would love to see a zoom pedal with 8-10footswitches and that can store 6-8 patches per bank.. something that can compete with the functionality of the helix

[@robtv2978]

zoom g9.2tt

[@bumblefritz]

Really hope they add a Harmonic Tremolo.

[@bimaldhorda9611]

Just a suggestion. It's been a while since the last update on this. Why not have something that enables us to switch effects on/off directly instead of using the scroll switches then waiting to toggle. I understand that the product was launched many years ago but I'm sure you'll have happy users if you keep the updates coming. UI improvements are always welcome.

[@maxie_6e]

Yes. Correct. I wish a little big touch screen comes.and a dedicated looper and rhythm.

[@GooseHen25]

@@maxie_6e yes, separate looper and rhythm from effects and more easily accessible would be massive improvement

[@maxie_6e]

really loved this stompbox like interface. but a new version with touch screen and dedicated loopmachine and drum machine is needed to be added in future without distructing the overall looks ofthe unit.

[@longtartisso2806]

Waiting for New Amps, cab and Sims

[@amanchaure5584]

can we change the effect while playing guitar just by using any one of the required switches?

[@AaronNGBnTech]

Hey zoom, You really should give some love to Dave Simpson

[@jackdenial3310]

What will be the best speaker or amps (mid range price)for zoom G5n? Not for recording. For practice & for small shows. Need some guide.

[@DzoniMakaroni]

Does the pedal have a preamp so it can go directly into a speaker?

[@littlebritain64]

Hi, since I think there is no "Amp" "Cab" & "Mic" general "Off" and "On", but only a patch - by - patch nerve consuming "Off" and "On" option for them, is there a hope to see such a "General Off/On" option for "Amp" "Cab" & "Mic" in the next firmware? This would be soooo useful when using a Pc and then a true amplifier.... Hope really You could do this for Your faithful customers.... Thanks in advance!

[@littlebritain64]

Hi, I am sad and confused. I bought a second hand but brand new looking Zoom G5n, on the box V2 sticker, 3.0 firmware. The trouble is about the Octaver effect. I met a patch, probably the first one with it in the chain, and the octaver changes the pitch several times in a little seconds. It behaves like a lfo pitcher. Is this a common trouble? Can it be fixed somehow? Can Zoom release a fix for this? Please reply, I am in panic since love the unit. Thanks!

[@GooseHen25]

What are the best other resources or vids people have come across to help get the most out of this? Cheers

[@whosentsb]

Looper and rhythm must independent not in patches...

[@MrLennonson]

I agree!

[@akprashamusic1980]

I agree too

[@WaqarMalikGuitarist]

I agree

[@maxie_6e]

Also update with having a touch screen

[@lianguiteofficial1990]

Plus expression pedal like volume control, wahwah etc

[@jamesrobert4106]

I have a Zoom g5n. I plug it into a couple of different amps...I have tried lots of patches from KZbin and they NEVER sound remotely close. I never know why.

[@merjanjavier508]

Hi can i ask how many overall effects on this zoom G5n?? Pleasee reply so that i can decide what to buy thank you

[@robertrodriguez5480]

It comes with 130 effects already built in

[@anup_pinkfloydian]

Can zoom please give us a valve based pedal such as a Chandler Tube driver or BK butler Tube driver? This is a big miss in zoom g5n

[@andreas-franke]

Me as a bass player, really also want a expression pedal. Why there is no B3Xn or a B5n, or better ONE device for guitar AND bass? It's only software Zoom!

[@iobeid87]

Can I use this pedal with my Cordoba C7 CE nylon string guitar ?

[@ArifSondani]

Can somebody help me? I have created a few Metal patches with Zoom G5n, but when I use it for tapping, the sound does not came out. Is it related to the settings on the ZNR? Or do I have to add compression? Thank you.

[@davidgilmour1478]

you should add a rotary speaker without pedal and with more parameters

[@abhayprakash6070]

Can we use the 4 cable method with this unit.?

[@arthurdrack30]

I just got one today. Has someone here noticed different brightness in the screens in spite of adjusting it with the contrast control ? Mine has the 4th miniscreen with a different lighting color, kindda yellowish , less contrast . Am I too picky or should I send it back? May be it is normal but I dunno if could be a factory issue.

[@ZoomSoundLab]

This is not normal, we would suggest contacting the retailer, email [e-mail], or call [phone]

[@arthurdrack30]

@@ZoomSoundLab thanks! I ve just got my replacement unit, way better, all 4 mini screens light equally but still a difference in contrast with main one. A tiny contrast difference , I cannot manage them to be set at the same level eventough I adjust contrast on LCD adjustment opt. Same question. Thanks in advance.

[@dermegazocker2591]

Hey Zoom, I bought the zoom g5n today i plugged everything in but nothing works

[@ZoomSoundLab]

Please email [e-mail]

[@bumblefritz]

Is there a bypass switch? I can't figure out how to turn everything off except my guitar signal without turning the effects off individually.

[@ZoomSoundLab]

The simplest way is to enable the tuner.

[@paypanoy2528]

is the exp pedal dual function? Can you use it as volume pedal on off possition and wah or any other effect in on possition?

[@ZoomSoundLab]

The expression pedal can only be assigned to one parameter/effect per patch.

[@paypanoy2528]

@@ZoomSoundLab ouch.....

[@joshuafrederick_]

why do u remove the xlr (balanced) output that was available on G3/G3X/G5?

[@severalpaperclips]

A thousand times this. Way to ruin an otherwise great product.

[@DanielWalters]

I can't imagine a home user needing a cable run longer than 20 feet and can't imagine any device that's causing so much interference that it'd be distracting during practice. Also, to be honest, I struggle to imagine a true professional using this on stage or in a studio. Is there something I'm missing here?

[@cirospm]

they also removed the usb audio interface function in g3n... so many strange downgrades

[@HeavyInstinct]

@@DanielWalters You don't have to be a "true professional" to be playing live gigs and this unit is more than good enough to meet the needs of the average bar band player. An XLR connection would be a far better choice to go direct to the board in this situation. So yeah you are missing something.

[@getholicviraj]

How can we get a dry signal from Zoom G5N?

[@akhilgusain2866]

I am having difficulty recording guitar with this processor. Can anyone guide or provide me any source to follow?

[@ikmalshahrom1102]

are the R/L mono output balanced signal? should i use TS or TRS cable?

[@ZoomSoundLab]

They are unbalanced outputs.

[@dontgiveafuck8856]

do the G5n have some kind of equalizer???

[@ZoomSoundLab]

Yes, many of the patches on the G5n have equalizer functions built into them, such as the Amp and Cabinet models

[@SirZakk1]

can i record with it without needing any audio interface? sound will be good?

[@ZoomSoundLab]

The G5n can operate as an audio interface via USB. It sounds great!

[@SirZakk1]

thank you so much

[@WaqarMalikGuitarist]

Yes you can. It sounds amazing. I have some videos on my channel using zoom via USB recording. Check those out for your reference

[@storiesandmorals]

I want one so bad. But it doesn't seem very user friendly. I might be dumb lol. But there's alot of button and navagating just to switch something etc. Also how would I hookm this up to my amp head and cab.

[@ZoomSoundLab]

You can email [e-mail] with any operational questions. You can connect the G5n output to your guitar amp head input.

[@roberth7399]

I had to use KZbin to assign patches. Thanks for the internet. But it's worth it. I just hook up in front of my 6505 combo on clean channel . Reverb on amp turned down. And works for me.

[@akhilgusain2866]

I purchased this unit and didn't get any usb cable. Tell me the type of this usb so i can purchase it.

[@ZoomSoundLab]

It is a standard USB 2.0 cable (Type-A to Type-B)

[@akhilgusain2866]

Thanks. I have purchased it. Please provide any video tutorial i can follow along to record guitar with g5n as an interface.

[@januvbhantooa9350]

Hi.. I've a Zoom G5.. Is there anyway i can get the lcd screen and vertical potentiometer as spare parts.?

[@ZoomSoundLab]

You will need to contact your local distributor for information: www.zoom-na.com/distributors

[@januvbhantooa9350]

ZoomSoundLab hi.. Thanks for replying.. The thing is that.. They no longer operate here in Mauritius.. Is there any way i can contact Zoom lab so that i can buy those parts.?

[@jorgemiran4762]

you should get Martin Moyano as an endorser, he make the best presets for G1on and G3 ever!

[@jasecola]

How would this sound through a basic modeling amp like the Yamaha THR10C?

[@George2ko]

Hello! I Know this comment is old, but have you found out whether the Yamaha Thr models and this product are compatible ? Thanks in advance!

[@miljann98]

Can you use g3xn without an audio interface to record?

[@janhoracek2889]

Although I didn't try it because I don't own the g3xn, I found on the internet that it's not possible to record it without an audio interface.

[@miljann98]

@@janhoracek2889 Thanks for the replys, though in 2 years I'm in a completely different situation :D

[@janhoracek2889]

@@miljann98 Yeah, I thought that, but I answered it mainly for other people who don't know the answer and are looking for it☺️. BTW, do you have the g3xn or g5n, and if yes, are you satisfied with it? (I'm thinking about getting one of those, but there are also some other that I'm considering, co I would be glad if you could tell me some shortcomings or experiences😊). Sorry for my English 😂

[@miljann98]

@@janhoracek2889 No I didn't go that route. I ended up buying Boss Katana 50 amp. It acts as an interface when connected to the pc with a usb, so that's what I use to record and it works great. Many sound options on it and many presets to find online. I have some covers on my channel using the amp to record, you can check out if interested

[@chumleyshaver7942]

Twiddle away with all the knobs and screens and parameter-this-and-parameter-that and kitchen sink what-all-not in your bedroom - tooo complicated to tweak on-the-fly in live gig settings! (at least for me). Just bought one of these, but back on craigslist it goes - and me back to my old-school pedal board, thank you!

[@jonah-8149]

Is there any lag between switching patches or is it seamless?

[@angustam7509]

Have you found out 2 years in? I'm thinking of buying this and thinking about switching tones in memory mode between patches, is that possible on the fly?

[@jackjohnny1926]

Zoom g5n or Boss me 80 ?

[@janhoracek2889]

I'm choosing a multi effect now, and I'm deciding between Zoom G5n, Zoom G3Xn, Boss ME-80, Mooer GE 200 and Boss GT-1. Still don't know which one is better and which one to go for. If you already decided between those two you mentioned, could you please tell me which of them you chose and why?

[@rishabhthakur6627]

Can I use this processer for bass guitar?

[@j1b00m7]

yes

[@peacechannel9581]

I wish to purchase, but could'nt afford😢

[@caseyleiwakabessy]

It says that you can connect it straight to a PA system. Are the outputs balanced outputs or not?

[@ZoomSoundLab]

The 1/4" outputs are unbalanced.

[@severalpaperclips]

Whoever decided to remove balanced XLR output from this product line should be fired.

[@britishpoprockplaylist8501]

severalpaperclips savage 🤣😅

[@1337million]

Can't decide whether to get a G5N or G3XN

[@DzoniMakaroni]

Hey, I know it's been two years but if you bought either one, can you tell me which is better for the money? I'm also facing the same question

[@itsmehahaha8295]

@@DzoniMakaroni hi what happened if you bought one, what's better and what's worth it

[@DzoniMakaroni]

@@itsmehahaha8295 Hey, I actually didn't buy either. Kiko Loureiro of Megadeth uses a G5n so I would assume that the G5n is amazing, otherwise he wouldn't be using it. I didn't buy anything because I just stuck with my digital amp, really don't need a processor here to be honest.

[@itsmehahaha8295]

@@DzoniMakaroni i have a question. I don't have any multi effects or any kinds of pedal. I want to know whats the best brand best model and what's best for your money. Can you suggest me some? The tone that I want sounds like a little bit from lamb of god. And sometimes sounds like some djent band and some math rock cleanliness

[@DzoniMakaroni]

@@itsmehahaha8295 I don't really know about those tones, but I would suggest a Mooer GE 300 or 200. Don't buy the 150, it sounds bad.

[@jackbaroso6237]

Does the sound change depends on the order of the effects?

[@ZoomSoundLab]

Yes!

[@jackbaroso6237]

@@ZoomSoundLab Thanks 👍

[@armandohernandezvaldez6682]

They are forgetting the g5n, it is time for a new update please. New effects, more range of effects. don't forget g5n fans.

[@hemantakakati1103]

Check there website latest update is october 2020

[@armandohernandezvaldez6682]

@@hemantakakati1103 yeah!

[@rabinawal76]

How to use looper?

[@ZoomSoundLab]

Just add the Looper effect to your patch!

[@soumikdutta5358]

Hello, a problem I'm facing with this processor is I am having to set the volume of all patches separately. This gets a bit tricky at times as when you change patches the ups and downs in volume really makes people stare at you. Is there any option on this unit to set the volume of all patches globally?? So, that the patches change but they sound at par with each other. I would highly appreciate if someone helps thanks

[@MeesterJoey]

I don't think so. You've got to use your ears to set it all of the desired patches at the same volume, which means a lot of switching back and forth to listen.

[@rabinawal76]

How to create bass sound with a guitar on Zoom g5n?

[@ZoomSoundLab]

You can use a pitch shift effect.

[@rabinawal76]

ZoomSoundLab but how to make it sound exactly like a bass guitar ... I mean right level?

[@facespaz]

@@rabinawal76 exactly? Buy a bass.

[@indrajitsen126]

I have a problem with my Zoom G5n.. can I explain here?

[@ZoomSoundLab]

Please email [e-mail] to troubleshoot the issue.

[@indrajitsen126]

@@ZoomSoundLab thank you very much

[@jchin0621]

Hello ZoomSoundLab I am using the zoom g5n and I connect it to my pc using the usb, however i couldn't get a good sound. When I use the effects, it sounds like a distorted can. Is there any settings that I need to adjust? I've adjusted the audio recording level to the lowest value but the sound is still the same.

[@ZoomSoundLab]

Please email [e-mail] to troubleshoot the issue.

[@stefanyreyesrosas3493]

Just bought this for my husband!

[@emmjhay7354]

OMG...that's lovely...

[@julzmuzik9464]

lucky husband ❤

[@souvikmitra6198]

does zoom G5n is a tube amp?

[@kappachino2569]

The g5n is not a tube amp, but you can plug it to a tube amp

[@souvikmitra6198]

is it true that that during looper we will not be able to change patches?

[@VinayKumar-dj4kv]

Souvik Mitra Yes it is true

[@rodericktompkins7882]

Can I power it with a one spot in an emergency??

[@ZoomSoundLab]

We can only recommend powering it with the Zoom AD-16 power adapter.

[@NN-tk7uw]

Just got one for home use use. I like it overall but: * The looper control is clumsy and there is no external pedal control possible. Very inconvenient to scroll through the stomp boxes to find the looper each time. * The power supply cord is short, flimsy and unshielded. * EQs occupy 2 stomp box places so with the looper you have 1 stomp box remaining.

[@amanchaure5584]

can we creat our own patch?

[@ZoomSoundLab]

Yes, you can create your own patches on the G5n.

[@saswatidhar3278]

What a question!! And ZOOM is so jobless,they even reply?? HUGE RESPECT!!!!

[@ASTROindi]

Is this Made is China ?

[@Malcolm701]

Too much information to take in...

[@agg25gga]

Press pause

[@SiriusJay]

I think that the difference between G5 and G5n is G5n has more put-button and guitar Lap. I have g5. but i now regret buying g5. g5n is more good than g5. Can anyone change me??? lol^^

[@WaqarMalikGuitarist]

G5n is much better than G5. I have previously used g5. After that i switched to line 6 pod hd500x and now i am using g5n. It beats the 500x and g5 with big margin. The amp modelling is much better on g5n from g5. The build quality is much better more dsp power i believe.

[@WaqarMalikGuitarist]

You can check my videos on how g5n sounds directly using USB without any post processing

[@guitarloo]

The Wah Wah simulators are whimpy. More like Cry Babies not a serious Wah pedal like a Behringer Hellbabe, Exotic Effects XW-1 or a Morley? Your samples are just too thin. Now I need to buy an external pedal. Thx Zoom.

[@agg25gga]

Doesn't sound like you need a cry baby

[@sentenza5098]

This waste of space machine must be the worst shitty piece of crap multi-effect processor i have ever had. i regret the NO i f'n curse the day i decided to buy this shit. Hundred or thousands of options to create your own sound, but all of them sound like shit and something no one in their right mind would ever use. I have ONE f'n sound i have used with this and even that is starting to piss me off. Other one i found has an annoying little crunch in it (it sounds like its my headphones are cracking) so i cant use that. This pisses me off. I should have just bought the Empress heavy. Which i will! Damn this shit. HORRIBLE SHITE. Or maybe i am just a dumdum who cant use this properly. Go ahead, buy this and find out!!

[@fianvierecke2755]

Can i take this on the road and have a reliable and good sound when i plug it directly into the mixer of the venue? I dont want to bring heavy amplifiers and cabs

[@hruaizelakisuke]

Yes

[@MorHalfon]

do the G5n have some kind of drop pedal?