G604 Lightspeed Double Click | LMB + RMB Switch Replacement Kailh GM 8.0 | Full Teardown Disassembly

[@GraniteFaun]

Just succesfully changed the switches in mine for some kailh GM8.0 . I've switched to using your tutorial because it wasn't including a reassembly tutorial, without one i'd be puzzling for days... Thank you soooo much!

[@progressivediy9677]

Glad it helped bro!

[@xPorkchops007x]

Some extra tips: 1) Use the < and > keys on your keyboard to view frame by frame. 2) You don't need to pull off the entire bottom pads, just lift where the screw holes are. Be careful to not separate the pad from the adhesive; they are individual layers and you need to get under both (I used a metal wedge tool). 3) Be careful to not lose those two tiny springs in the front of the mouse. 4) Organize your screws. Optionally record a video or time-lapse of yourself doing this so you know where each screw came from. I used the iFixIt Starter Tool Kit which has a screw tray with a grid which made it so much easier. 5) You don't *need* to remove all the solder and use flux, but it helps. I got by with only some extra solder. Adding extra solder helps melt the solder joints easier than heating the OEM solder alone. I wedged tweezers under the old mouse switch to add pressure so when I melted the solder joints it came out. It took a while of slowly pulling each end of the switch until it came out. Be careful to not damage or bend other parts on the board. Putting on the new switches was a similar hassle since I didn't clear out the holes. Use tweezers to clamp the switch onto the board while you melt the new solder joints. 6) When it's time to reassemble, look at the disassembly section again to help remember where each screw went. 7) Be careful to tighten the screws near the mouse wheel correctly (not too tight/loose). My wheel button feels too stiff after doing this but I'm not opening it up again lol. Thanks so much for the video, it helped a lot.

[@progressivediy9677]

Glad it helped! Thanks for the thorough comment,.

[@MadfrogNZ]

Thanks for this, switched my microswotches with ease thanks to you

[@KaiFaify]

Огромное спасибо! Вы очень помогли. Всё получилось. Самое сложное было отпаять 3х контактные переключатели. Я уже думал, что убил плату, но все работает. Посмотрим на сколько хватит новых переключателей. Покупал Kailh GM 8.0 по доллару.

[@aphleesegurtra2820]

mine is double clicking, just ordered switches and this video is super helpful, Thank you!

[@progressivediy9677]

Glad it helped !

[@aphleesegurtra2820]

@@progressivediy9677 Funny that I've a spare G604 that's still sealed, Will keep it that way until this one is no longer serviceable this is the best mouse I've ever had. Will report after surgery is complete.

[@arminsalehpoor1995]

Thank a ton. I fixed my Logitech G604

[@progressivediy9677]

Most welcome sir.

[@yalcin1234]

Than you ❤

[@lukemillermakes]

Thanks for this! I just did the same mod myself and was thrilled to find your video.

[@progressivediy9677]

You're welcome. Cheers 🍻 😁 👍🏼

[@skerritv3455]

amazing !

[@progressivediy9677]

Glad you think so!

[@GilbertAppleby]

Is there a really tiny spring that is part of the switches? It fell out and onto the floor around 3:40 and now I can't find it.

[@GilbertAppleby]

Warning - there are actually two springs under the scroll wheel assembly! I found them after crawling around for a few minutes. They are for springing back the middle scroll wheel click. The reassembly shows them clearer.

[@조상진-r6j]

thank u

[@progressivediy9677]

Most welcome

[@simonmorin1]

Do you remember at which temperature you set your soldering machine and what kind of flux you use for desoldering

[@progressivediy9677]

300degC, common soldering flux

[@ohdudez]

Tried it last night. It was a painful process, lost the funny tiny springs, for some reason when i keep the thing that the click latches to it'll get stuck, finally then I reassambled it all. And the new switch doesn't work. I yeeted this mouse straight to the trashbin and bought a simpler designed mouse. Now i will always look for disassembly videos before buying mouse. Missed the fun features but not worth the painful effort of replacing switch, especially as long as logitech mouse still uses these shitty switches Thanks for the video though! Would never attempted it without this video

[@IrocZIV]

I recently watched an hour long breakdown of why modern Logitech mice have failing switches. They don't have switches designed for the low current they use now. Since the switches are always out of spec they will fail well before their rated fail time. That said the G604 has a 2 warranty, and Logitech replaced mine no questions asked, just giving them the serial number.

[@progressivediy9677]

Yep, better submit a RMA if still under warranty. Nice info about the low current issue, thank you.

[@clixt984]

Mine died a few days after warranty... So for those reading this comment, purchase your peripherals with a credit card that offers extended warranty. AMEX is great and have a friction less online application process (as of today). They basically refund you the purchase price of the device after a few days.

[@DaMarakuHD]

the tiny coil springs wheer the first and only thing I lost inmidiatly after removing the wheel....

[@simplework9559]

thanks for giving me the answer i was looking for, to know if the switch was compatible with the mouse

[@progressivediy9677]

you're welcome, glad to help 😊

[@lovepack54]

Do you offer paid services for this? I have 3 604s that need new switches and as much as I would love to attempt this I lack both the tools and the dexterity in the hands.

[@progressivediy9677]

yes i do, as for this video is the footage for my customer. if you are in indonesia then feel free to hit me up, link on my bio

[@danielmae]

Where you from? Can do it too.

[@rasalghul9403]

Where can I get the schematics for the device? I fucked up while soldering and the switch does not work. May have screwed up the wire connections to the pads.

[@progressivediy9677]

Why urged for schematics if you can jumpering the nearest wire connection to the switch pin using 0.1mm wire?

[@jlelelr]

what a design! it's pain in the ass to put it back

[@progressivediy9677]

indeed 😅

[@syarifairlangga4608]

They sure make the mouse hard to be repaired

[@bruhmanfromthefifthfloor]

hey brotha, how much are you charging to do this currently?

[@progressivediy9677]

where are you brotha?

[@bruhmanfromthefifthfloor]

@@progressivediy9677 usa, Texas

[@MTanakaX]

Is that yellow/golden circle the middle button switch? Can it be replaced?

[@progressivediy9677]

Yes it is, can be replace just search for SMD tactile switch. I'm not sure about the size, maybe 5x5x0.75 but please measure it yourself

[@MTanakaX]

@@progressivediy9677 Thank you!

[@MrTripi]

Thanks for the instructional vid but man does this look like such a pain in the ass.

[@sephirotic87]

Tried replacing the switch but I f*c up the contact pad for the left click. I don't know why these videos always makes desoldering easier than it looks. Thanks for the video, anyway. Also thanks so much, Logitech, for using garbage chinese microswitches, I'm never buying a mouse from Logitech ever again.

[@progressivediy9677]

You're welcome bro. When desoldering, you just need flux and a little bit patience. Dont put pressure on the soldering tip.