GADGETS

[@jondieter4903]

Hi Denis I really appreciate your honest review of.this breakout box and other tools you review. I ended up buying this breakout box and its perfect and shows you dont need to spend hundreds on one to do the job.

[@theGADGETSplaylist]

we are of the same mind:) appreciate the feedback, Jon

[@NextLevelAutoDiagnosticsLLC]

I agree. I have the Hantek leads and use them when I don't want to backprobe weatherpacked connections. I hesitated at the AES set when it was at $170 and now post pandemic at $270 its definitely out of my budget.

[@theGADGETSplaylist]

not just DIYers ... our HScope Telegram group has many members who work at this for a living (like you) but aren't made of money and look for sensible, affordable solutions

[@advancedleveldiagnostics]

That looks like a great BoB, Thanks for sharing! I fully agree you deserve a LOT more subscribers!

[@theGADGETSplaylist]

as your channel does also...am sure you'll get there, people love diag work as you do...I predict your channel will do very well!

[@calholli]

I agree.. This channel is a gem. Too many "mechanic pros' think they have to use the brand name stuff or they aren't legit as a company. I don't buy into this kind of disease of the mind. I'll probably get this BOB just because of those leads.. that's a steal

[@theGADGETSplaylist]

thanks! yep, a steal...especially if can find discounted on Aliexpress

[@djmobileautoservices]

Thanks Mr D. Appreciate all the work you put in

[@theGADGETSplaylist]

you're also a Mr D, Daniel:)

[@teejaymcglynn]

Thanks for the vid- I just bought a similar breakout box off amazon and picked it because of all the included wiring adapters. But I’d like to find more info on what type of scenarios I can best utilize this tool during troubleshooting

[@theGADGETSplaylist]

most often used for CAN BUS measurements in combination with an oscilloscope there's an example going back to the early days of this channel in GADGETS#22

[@punyman]

There is one more important reason to have this, I believe. For newer vehicles, when you change the battery just plug in 12 V in that middle lower hole marked DC and the ECM won't loose it's mind 😂 for the love of the old battery. Love your channel Dennis, the Telegram community and Martin's store as well. Stay warm up there 😂😂😂 and I hope that you'll be busy this winter with this channel MP

[@theGADGETSplaylist]

thx so much for your comment been a nice stretch of weather so far...BUT, we're about to get into it🥶

[@MarkusSchlaus]

what size and polarity does this dc port have?

[@bgpwrddy]

Love the channel...subbed from the first video I watched...been telling all my friends...maybe I need smarter friends...🤣

[@theGADGETSplaylist]

I got friends I wouldn't want to submit to an IQ test but they're still fun to hang out with:)

[@punyman]

😂

[@ToddErickson365]

The break out cables can be used to pin a control unit so it can be programmed off the car.

[@theGADGETSplaylist]

but not in conjunction with the BOB, right Todd?

[@ThePracticalMechanic]

I burnt up a cable on my old Snapon modis because the grounds are bridged inside the scantool. Another shops had installed a new engine in a dodge Durango with a 5.2 and they connected the engine ground wire to the alternator B+ instead of connecting it to the ground stud located 3” away.

[@theGADGETSplaylist]

we'd need eyes all around our head:)

[@rs1971camaro]

That is a great bargain with the included test leads!

[@robertmobileman8304]

i have that BOB well worth the money, love your channel Dennis

[@theGADGETSplaylist]

thanks so much Robert:)

[@DavidJAutomotive]

Hi Denis, nice video. I can think of some ideas with those cables. I can give it double utility: in the vehicle and on the workbench (electronic repair)

[@theGADGETSplaylist]

they are handy David and thanks for encouraging me to make this video:)

[@calholli]

If nothing else-- those leads are good for checking pin fitment on connectors; super handy to have around.

[@ohfugit]

I have the same one. Those leads are really handy. Great Channel

[@theGADGETSplaylist]

they sure are thanks for your comment, much appreciated:)

[@bekomcar554]

Excuse me for my ignorance, how do you tell if 4 and 5 are bridged by just appearance? I never knew they are bridged. A big take away. Thank you, Dennis.

[@theGADGETSplaylist]

on some you can see the circuit trace connect 4 & 5 together and can measure also between 4 & 5 with ohmmeter and get 0Ω with the AUTOOL (and also on some other brands) when we measure 4 & 5 we get "OL" ... open loop

[@bekomcar554]

@@theGADGETSplaylistThank you for your insights. I learnt that just now. I ordered the one myself too because of your kind of recommendation.

[@theGADGETSplaylist]

@@bekomcar554 am sure you'll enjoy it and greetings from Canada to South Korea:)

[@secretsquirrel9722]

Agreed that this channel is awesome! I would say that it is a real niche though. You would have to think of the categories and sub-categories this channel filters down to . . . Automotive Someone with technical knowledge. Looking to improve their tooling. Willing to look past the equivalent of the snap-on truck to find those tools. Willing to spend time to find value for money. Willing to diy a tool to some extent. Etc etc. For a lot of people, it's a flex to have the entire pico and aeswave catalogue down to the wps500. I'd like to know where Ivan from pine hollows diagnostic gets his pressure sensor from for his pressure transducer. Lastly, what the he'll are they expecting you to use so many male to male terminal for, haha? Thanks as always for bringing these brilliant bang for buck options to us!

[@theGADGETSplaylist]

lol...double-ended dildos have their uses

[@uptownimports-foreignautor5338]

I think those cables are for a K Line bus to hook all the connections together then remove them one by one to diagnose which module is taking down the network...

[@theGADGETSplaylist]

sure...and many other uses

[@TheGibby3340]

Good value 👍

[@philb2334]

Good video Denis.. I still haven't used mine

[@DependableAutoTruck]

great video i have the AES wave set but that is nice i to don't understand why you don't have 10 times the subscribers you have

[@theGADGETSplaylist]

yeah, beats me...lol

[@danman9017]

thanks

[@mikesautomotivediagnostics8080]

I looked this up and found it on amazon for $32. It looks the same as you have.

[@theGADGETSplaylist]

big difference between Amazon.com and Amazon.ca where it's $65 + tax + $7 shipping

[@mikesautomotivediagnostics8080]

@@theGADGETSplaylist WOW, I didn't think that there was that much difference. I guess the U.S. viewers will be able to save some money.