New From Gold Hog! - Z3

[@chuckster6513]

Hey Dan, Gold Hog sent you that product because they believe you are an honest person not afraid to point out warts, dysfunctional aspects and or just plain flaws with a piece of equipment. I hope they mention you and your channel in or on their advertisements. I for one respect you and your channel as truthful information and fun entertainment, Thank you. Take Care

[@acubsshadow3750]

Yesterday was my second day out gold panning after seeing how fun it looked in your vids. Ive now watched close to all of them at this point lol. Thank you for sharing your knowledge and thanks for giving me a hobby that gets me outside again!

[@asjamuir5534]

Best of luck with your hunting and mayit brings you many many years of joy and some au

[@bobbyspain5030]

Its a good time to start prospecting with gold being at about 2178.80 even though that can always change up or down of course.

[@chazwickjeffriesvonbronswi9922]

How much did you get from your second day?

[@acubsshadow3750]

@@chazwickjeffriesvonbronswi9922 i forgot my snuffer bottle but i was able to get one flour spec into an old receipt to bring home and put into the snuffer bottle for a later date lol. And i found an awesome fist sized stone that I believe was quartz (transparent whitish color) stuck under a boulder where it must have been tumbling on itself for a while because it rounded itself really cool on one side. Almost looked it was trying to become a crystal ball lol

[@tylerkrug7719]

​@bobbyspain5030 most people aren't panning to make money,it's a hobby,it's fun and it's nice to get outside and spend time on the river,or creek.

[@chrishartley7493]

As someone who has a high banker I love the wing nuts that installed. No tools needed to disassemble for clean out or to break down for transportation.😊

[@TheZombieSaints]

I LOVE wingnuts 😂

[@joesinakandid528]

A mighty good evaluation on that prototype Dan! ALL Doc's products have done very well for me over time and all of them catch noticeably more Gold, of all sizes, than what I used in the past. Since I match my equipment to the task and situation at hand I have, over time, brought 7 pieces of Gold Hog equipment on line in my one man Alaskan one shovel operation. I can firmly say that I wouldn't go back to any other piece of equipment I've ever used before because I trust the performance. Oh yeah - no connection with Gold Hog other than a thoroughly satisfied customer. Joe S, near Talkeetna, AK and Northern Idaho in the winter.

[@Mrjoshuasjourneyzzz10420]

You earned my sub first show many years ago!!!

[@alla5578]

Lovely to see you again, Sir Hurd! You are the knowledge! This is what I missed from school on geology. I'm an engineer now, eternally grateful for your teaching to us all! Thank you ever so much for your video's....I'm English so it is definitely "zed"...well apart from zee....or zzzz....welcome everyone! Haha

[@TomFarrell-p9z]

I know nothing about finding/extracting gold. But the brown paper that the gold hog was packed in makes great starter for your wood stove. 🙂

[@UmmmmmmmWhat]

Also, cats love crinkly brown shipping paper.

[@danhodgins4015]

Wow, impressive result! I think the switchback / zig zag may help recovery due to each stop/start providing slightly more settling time at the top of each sluice. It also resets the material, enabling any tinfoil kites sailing down the sluice to get caught. I like this product Dan, thanks for sharing this test!

[@ivonneamfibie1483]

'Mosh Pit', love it! Took me back some decades 😜 It's comments like this, the background music choices, the humor and the way Dan interacts with his lovely wife and friends, and his surroundings ( or is the river his best friend?😁) that makes me love this channel♥️♥️♥️

[@olyprospecting6419]

Impressive! Nice job Doc and Gold Hog. And thank you Dan for going over this product. Looking forward to more videos featuring this equipment.

[@papajoecooking4425]

Instead of wing nut I’d use flat head pin with hole put washer on the bottom so clasp pin will be tight. I did that on my 4” dredge. 😂 Guys would make fun of me said it looked like a race car hood to hold hood down! 😂 Enjoyed your video. Gold Hog reminds me of the Little John back in the day (wood)

[@KFitzG35competitor]

I was looking at this on their site and magically the first video when I opened youtube was this. I wasn't even looking for it haha. Great video as always!

[@dawndixon402]

😁👋👍👍👏👏💕🙏🏻 Thank you Dan. It looked so warm. When you were filming. I am so very ready for spring. At least 60 F would be heaven.

[@diamondhunterTv5]

Exciting news from Gold Hog! 🌟 Discover the latest innovations and gold prospecting tools to elevate your mining experience. Stay tuned for the ultimate in gold recovery technology! 💰✨ 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉😮😮😮😮😮

[@tknutt]

"If you're inclined" lol nice one Dan

[@terrypokorny3858]

Dan i like wing nuts they work very well for a lot of uses.

[@michaeljustus8305]

Thank you for the review of this new product. The bars on the hopper could of been a little longer and slanted down wards to help with the tailings hitting the 2nd tray. Im very impressed on how much gold it still caught due to the size.

[@jeffhays1968]

Looks like a great beach machine.

[@AlabamaBedrock]

Your video just made goldhog $700. After seeing that capture rate after doing all the "bad" things.cant wait for delivery to try it out in alabama with all our flour gold. Thanks for the work you do.

[@mdoster5325]

My wife and I have a Gold Hog Piglet that we love, however this one seems to be getting a little tall for long term feeding. The higher you have to lift your shovel or bucket, the sooner you'll burn out.

[@garyrice9057]

Drink red bull it gives you wings👍

[@joesinakandid528]

Dan mentioned the "Height" aspect straight away. He needed excessive height for the camera angle to show everything working. In actual use the entire rig will be lower, as would be smart. Joe S - in AK and ID

[@hydroaxop73]

It's ok Dan that carts wheel is only flat on one side 😂😂😂 cool video of the gold hog

[@Hillbilly-Tech]

Workaround! Don't dump large rocks into the Gold Hog that you already know isn't Gold! Thanks Dan!

[@4seasonspix]

Depending on the soil and or weather situation, larger rocks might have gold-peppered dirt sticking to them, so you do want those rocks to get cleaned by the pressured water. On the other hand, had he left the dam in place, those larger rocks would have never even gotten near the grizzly area. But that makes me wonder, how the manufacturer was going to deal with large rocks piling up against the dam wall. Is this highbanker meant to deal with pre-screened dirt only?

[@kdaviper]

​@@4seasonspixmaybe they reason that since it will be manually fed in most scenarios, it would be easy to keep larger rocks cleared? Either rinse them off and toss them or drop them in a bucket for later rinsing. Maybe.

[@SIGINTprivate]

Have you ever thought about using a multi-tool to vibrate tap the gold to the top of the pan? It’s is fantastic at cleaning my vacuum filter!

[@TimberTheTerror]

Awesome I wish I had gold hog mats so bad

[@richardmartin4634]

Dan is would also like to see more room on water inlets as 90 or 45 degree elbows that give more room for tailings to fall! Also more room for bigger rocks to drop out farther! Great video

[@FinalSparkLux]

I think some elbows for the water inlets would be good that way the hoses aren't in front of the area where the rocks and stuff are discharged. It looked like a lot of rocks were hitting the hose and jumping into the lower layer because of it. Maybe it's a non issue, but if a big enough rock did it, it could potentially cause more losses by disturbing the material. Idk, just a thought

[@usa91787]

Unfortunately, where I live in the States those specks next to the dime are what we get. No nuggets and pickers are rare so it's about being outdoors. We call it "Flour Gold". That sluice is amazing to catch all that flour gold.

[@johnstuart8511]

I like. I like this Hog. Looks like a double dekker. I am sure you could customize to your working experience. Extra Matt's. Thanks for sharing your experience and stories. Regards from South Africa 🇿🇦.

[@rogerdudra178]

The 1st thing that came into my mind was Pauly when you said that expression 'wingnut'.

[@Toby.ornottoby]

Awesome review. For context, I wonder if viewers really understood the fine-grain aspect. When you compare your testing of the boar box, catching at what is a better rate. You didn't use as fine grain as you did with this one. Thanks for pushing it to the limit and for your honest review. I am sold. I will be picking up one of these.

[@sovereignlivingsoul]

i like wingnuts and there were a few more than 20 specs in the third pan, as for the second shelf, i think you could make it a drawer with a liner to prevent leakage

[@richardmartin4634]

Also Dan some nozzles that you can change out for increase/ decrease the pressure running up the washout! Im impressed

[@CraigInNC]

I like this setup more than the Boar Box, with this being open. I look forward to seeing the Z3 reassembled per Gold Hog. Please post a short if too long to getting to your mine?

[@bladed.i.6547]

Wingnut love here! So easy to loosen, what is everyone's problem? And very nice to see this product review in your own inimitable style, Dan!

[@Gary-pp7cb]

wing nuts do good at their job. no wrenches are needed. if you want to you can exchange the wing nuts for colored vacuum caps (automotive vacuum caps rubber or vinyl bought from a parts store.)to the threaded studs. their easy to place and take off they keep the bolt studs from backing out, but they don't keep the bolts as secure as the real nuts or wing nuts do.

[@nickygrobler2979]

Brilliant video. Looking forward in buying this. 👌🏻👍🏻👏🏻

[@stlrsmike]

I run gold hog mats in my converted a-52 and I switched to all wing nuts 2 years ago because it's easier to remove the mats on the river. I put the wing nut in a pan so I don't lose it. I also bring extras with me, just in case. lol

[@menow7851]

Maybe you could attach a magnet to the sluice for your wing nuts to be safe when removed.

[@stlrsmike]

@@menow7851 It won't work, the sluice is aluminum.

[@ZOriginal__]

Just made my afternoon!!! Cheers brother!!!

[@Jer.Who.Cares369]

NICE equipment Dan. Thanks for showing us. I enjoy your educational videos.

[@JesseJames-rq4ee]

It helps to read the directions. When assembling new toys

[@richhall9775]

A water hose hookup for the hopper would be nice also

[@timmydrake9125]

Dan,you are the greatest. Make it exciting, profitable,all round. Just fun

[@normm]

Great video Dan. Perhaps Gold Hog can make that gap adjustable so the gap can be increased or decreased depending on the size of the rocks in the material being sluiced?

[@frequensea9434]

Filmed in NOV 2023?!? Dang you are ahead of schedule!

[@jeffmcdonald8076]

Don't forget the jet dry lol I use a 4 tub method . A while back I didn't put any Jet-Dry and I actually found a couple of flakes of gold in the fourth tub. It was very disturbing wondering how much I lost that day.

[@breckfreeride]

Gold hog mats are still my favorite... Easy peasy

[@gregroth4696]

Take it to the MIne!!!!! Good job Gold Hog!

[@droning2239]

You do awesome work ! Thanks for getting me into gold panning! I’m in Edmonton Alberta where we find flour gold

[@DeathclawJedi]

This looks so much slicker than the prototype you tested!

[@ditch6389]

I LOVE WINGNUTS!!!!!! AND THIS CHANNEL!!!!!

[@DylanOsmond-w3n]

I just love this guy! I've learned so much from him

[@BB-iy7iz]

I'd get this if I was still a placer miner(now hardrock) put 100yards+ through my old Gold Hog Viper. Gold Hog mats are the real deal. Good compact highbanker, I like it.

[@michealklonowski5267]

nice new toy to work with ,and we will wait for the next one.

[@raptr2005]

great job on testing the gold hog! great review my friend. I'll definitely will be buying one! thanks dan.

[@martinfromseacity2010]

Always fun to watch, stay healthy. Thanks

[@adamlade4555]

Very good revue!! Always love your honesty

[@manjisaipoe517]

Thanks Dan, that trickling sound from the cracked bin made me have to go, my age is showing!😊

[@ericwiese7479]

Love Gold hog. My multisluice is great on glacial fines!

[@1944chevytruck]

GOOD JOB!

[@chrislilly1463]

Looks like a fantastic product!

[@Khusringoldminers]

Amazing very good, good lucky sir

[@breckfreeride]

I have been waiting for this for a few years...

[@tyediedhair]

your doing great and looking good Dan!

[@donhoughton271]

❤❤❤❤❤love it ,worked great. Thanks Dan for the dimo😊😊

[@Em-R-Coins]

Definitely flat flitrery gold nice. Look like a nice at home recirc system to back up the on site systems

[@davidlewis9068]

Very nice gear for sure.and they had solufor any issues you had too.

[@heaven-is-real]

good luck with your new gold hog highbanker Dan

[@BiGSmooth9010]

Hey Dan. It's back to "playing in the dirt" season in Montana. Im excited to get going. What is your favorite product for recovering from your cons? Im looking at the Black Magic Pro and a couple other mini miller tables. I jave a blue bowl but I hear these other options work better. Thanks bud and get after that thur' gold.

[@sgtscowl]

love a wing nut!! best screw fastener ever!

[@MyTallicaT]

They're wings nuts!

[@lucasreid6335]

Cute looking machine. How would you compare this to something like the Gold Cube?

[@jas57264]

Looks like a good system.

[@belovedwarrior483]

Good review Dan 👍👍👍

[@donaldhofman5257]

Awesome job!!!

[@rogerdudra178]

Greetings from the BIG SKY.

[@josephcormier5974]

Thanks Dan this was a very informative and enjoyable video keep up the great work six stars brother

[@chrisdowns422]

Wingnuts rock!

[@_TONY_Az]

Fantastic testing Dan wtg and it's very good

[@boondougie]

wingnuts are awesome!

[@cylonmk2]

Great vid. If only gold hog was not so expensive to post to Aus, they need a distributor here

[@ed4564]

Hi Dan, great channel...I just subscribed. I'm in AZ so water is hard to come by. Any idea what the water usage per yard or per ton of dirt?

[@RichardB_Uk]

Miners mosh . Sounds like a Yukon rock band

[@george-b3i-d2d]

do a test with the pumps one with a smooth tube of same size and the other pump with the supplied corrugated tube to see if there is any difference in flow amount

[@spiderwrangler4457]

Sluices on top of the ready rod seems like that should allow it to compact down even smaller with the legs still in place, yes?

[@GoldChasers]

Finally got a really highbanker eh! Nice! I love gold hog!

[@loganct5]

I like wingnuts, Dan is the best of them all!

[@amberandrews6842]

That was fun!!

[@denyscpoyner]

I call that size Gold " fly poop gold". 😂

[@breckfreeride]

I once purchased a motorcycle with no less than 10 wing nuts on it... It was the flying wingnut once i depoopulated it

[@markcohen6784]

Dear Dan, I know that this is way off the topic but I would really appreciate you if you could explain the difference between Chert rocks and Flint rocks? I would be greatful. I'm trying my hand at Flint Knapping 😊😊😊

[@bbmw9029]

Dan, how would you compare this to the Keene Mini-Max? They seem pretty similar in application. Do you think the multi level sluice box adds anything?

[@sunshinervtravlers57]

Awesome gold hog love it.

[@tammidee7402]

You can swap the wing nut for a cotter pin.

[@stevecollett901]

I like wing nuts! Wing nuts are cool!

[@Rijaswaan]

YOU ARE ALWAYS OUR INSPIRATION... WE KEEP FINDING.. HOPE YOU JOIN US TOO.. HAVE SOME HIMALAYAN GOLD TOO❤❤❤

[@Scott___T]

Any chance gold hog would make a bucket holder where the dam slides in? Seems like that could be useful

[@royjohnson465]

What do you mean by? ->> …where the dam slides in??

[@BrianM-44041]

​@@royjohnson465like a hook to hold a bucket to catch whatever coming out

[@royjohnson465]

@@BrianM-44041 -thank you.

[@Tonycarguy]

If they had expanded metal over moss in the hopper would probably help matters a lot.

[@gold-fever.prospecting]

Are all these closeups your usb microscope or did you use the hx80? Wanting to find a good in the field recordable high zoom camera. Thanks Dan!

[@lawrencebonello6916]

Hey Dan Do have any info about Canadian rules for sluice box use( especially Ontario ) Thank you

[@maxcap60]

HA! "if you're inclined" 5:57