GAME CHANGER? | Klipsch Reference Cinema System 5.1.4 with Dolby Atmos | OFFICIAL REVIEW | Costco

[@jamesbadham3560]

For a small to medium sized living room with 8 foot ceilings, this speaker system actually sounds really good for the budget minded individual. I am using an Onkyo TX-NR7100 and have calibrated the speakers in their positions using DIRAC. It is pleasantly surprising. Got my receiver new from Amazon for $893 and the speakers for $350. After taxes and shipping ( shipping was free on Amazon Prime), I only spent $1,350.00 for all of it. Watching Dolby Atmos and DTS-X content with the correct speaker configuration in the Onkyo along with DIRAC calibration has provided a noticeable upgrade to my previous 7.1 Surround Sound System. Sound is much more ambient with a greater depth in the sound stage from the music sound track to the movie sound affects. Frequency response is more then satisfactory for the price I paid.

[@ealanosborne]

That’s great news! Thanks for sharing! 🙌🎉

[@aawheaton]

Does this system have better quality sound than the Klipsch 5.1 bundle when you are not using any enhanced Dolby Atmos features?

[@robertsolis5980]

Thank you Ealan for the review . I waited for more than a week for your new video on this new klipsch from Costco. …… Waiting for the klipsch tower review .

[@arikononen4022]

Don't adjust LPF of LFE. It should be 120hz all the time. By adjusting it you are limitting .1 LFE movie effects which happen in between 0-120hz.

[@Matt314159]

I just picked up this Klipsch reference cinema speaker kit for $250 open box on Newegg. I'm excited to see what I can get for that amount of money. I hope it lives up to the reputation.

[@ealanosborne]

Woohoo! 🎉

[@CalCobra]

I have a nice Atlantic Technology THX Certified 5.1 system, but the Klipsch cinema 5.1.4 package intrigued me as does Atmos so I too went for the Newegg deal. My sub died on my 5.1 system, so for the price of a sub I got a 5.1.4 Klipsch speaker package. Was thinking about getting the Denon 760 at Costco (on sale for $379!) but am leaning towards the Pioneer Elite VSX-LX305 9.2 channel AVR. Seems like Pioneer has HDMI 2.1 figured out (unlike Denon and Yamaha which are buggy at best from everything I've read) plus it's 9 channels for the full Atmos experience. Could also add a second sub I for 5.2.4 suppose :) Any benefit to different sized subs?

[@wells2671]

good chance that the atmos experience wasn't up to par because you skipped the accuEQ setup. Based on the screenshot you shared, the Heights were only set 1ft further than the mains, so the atmost speaker to ceiling distance was not added which would create a different delay for them if they were. As Andrew Jones suggested with his atmos enabled speakers, once you run the auto EQ and finalize the distances/delays, you should add 1 to 3dB to the atmos speakers since they will lose some energy from having to bounce the sound off the ceiling. I run a 7.4.4 set up with the Andrew Jones Pioneer Elite speakers that have the atmos enable speakers built-in (like these Klipsch in your review), and the atmos effect is very convincing. My buddy just picked up this Klipsch system and will be using the Onkyo TX-NR7100. His room is not optimal since one wall opens up to another room, but it should be descent once he calibrates it.

[@mingomane1]

How did they end up sounding?

[@randumb313]

If I only have a 7.1 AVR and want to use these speakers, would it be better to use the front or rear atmos speakers?

[@muzkat101]

I wanted the Klipsch 5.1, and had been shopping for a good deal on them lately. BUT when I found that I could pick up the Klipsch 5.1.4 for $299, I jumped on it and bought it immediately; just recently. I also bought the Onkyo AVR6100 to go along with it for $279. However, I have yet to set up the system; my movie room needs a bit of remodeling first. Then I need a new widescreen monitor for the completion. As this will replace my old Panasonic SX-316 avr, I am certain that my new system will be far better than I had previously. Since my room is small; roughly 12'W x 13'L, and it is a shared common wall with a neighbor, I'll have to dial the sound levels down, especially the bass. I believe for the money, I got a pretty good deal, and I am absolutely sure it will offer me far more value for my budget to meet my expectations fully. I know there are a lot of avr and speaker options available; many far more expensive and far more than what I need. But I think I got the best value for what I need in a home entertainment system.

[@ealanosborne]

With your neighbor being so close, I totally agree the system you purchased will be an amazing upgrade! 🤘🎉

[@King_Midas]

Just ordered a Denon AVR- X3700H and bought this Atmos system to start out with. Got the Klipsch speakers for under 400. Thanks for the review.

[@ealanosborne]

Nice! Great start to your home theater! 🤘

[@King_Midas]

@@ealanosborne Any recommendations on stands for the 8 pound speakers?

[@captainsplash24]

Your channel is not just very informative but also very funny to watch. You really cover all angles and make if very easy for a beginner to understand. I'm about to upgrade from a soundbar to a Klipsch speakers system and you have helped a lot. Are the av receivers that you mention (denon, Sony, Onkyo, etc) the same as a "network" receiver? I also want to have a sound system around my house to play music and not sure if the home theater system is enough or if I need something else like an stereo receiver with wi-fi as I also want to use my speakers for parties, etc and not just movies. Thank you very much for being awesome Ealan.

[@M40C1T0]

Hey sorry this might b a stupid question but does this mean these speakers have 2 speakers in it so the sounds comes out from both speakers same time? Or you have to choose which one I'll use?

[@eddiegrim]

Can’t wait for the tower review !!

[@goodpics]

Do you have any suggestions for ceiling or in-wall speakers for the home theatre system?

[@ealanosborne]

ELAC debut series in wall speakers are the best you can get around $300. If that’s too out of your budget, Klipsch is the next best thing. 👍

[@mattmoore1003]

Any recommendations for an additional sub to make a 5. 2. 4? I bought this system but haven't opened the box yet as I'm still putting up drywall. This is my first system so I don't want to get something that's too powerful or not powerful enough to match up well with this sub.

[@ealanosborne]

This should be pretty comparable: amzn.to/3bJFJxi

[@mehulgdoshi]

Hello @Ealan, Hope you are doing well! I am happy to let you know that I recently upgraded my AVR to Denon AVR X4700H so that I can get the full benefit of the Dolby Atmos sound system with my new Klipsch Reference Cinema 5.1.4 speakers. I have a few questions though, can I use my old Monoprice satellite speakers as the height speakers and Klipsch speakers as floor speakers? The reason I am asking is that I feel the upward-firing speakers of the Klipsch system are not powerful enough, so I am wondering if using Monoprice satellite speakers as height speakers would give a better Dolby Atmos effect compared to Klipsch upward-firing speakers? Also, can I use Klipsch and Monoprice subwoofers together? Trying to see if I can have a 5.2.4 speaker setup. Is it safe to mix and match Klipsch speakers/subwoofer with Monoprice speakers/subwoofer on a single Denon AVR? Please advise. Highly appreciate your guidance!

[@ealanosborne]

You absolutely can do that! Most of the height effects are atmospheric and fairly subtle anyway, so mounting your Monoprice satellites up high will work much better than the upward-firing Klipsch speakers. And you can most certainly use the Klipsch and Monoprice subs together. Just make sure and level match them so one doesn’t overpower the other. But 2 subwoofers is always better than 1. 😁🤘

[@mehulgdoshi]

@@ealanosborne Thank you very much for your quick response and guidance! You are simply awesome!!

[@heavenlyxtacy]

Just the right speakers for the beginners, but I dont know if I am right but I guess when you setting the distance of the atmos speakers, you have to measure the distance from you speakers to ceiling to your ears, but you had put the straight distance when setting up, correct me if I am wrong..

[@nexcheets]

I picked this up for $599 this week. Now just trying to find a receiver to pair with it. Should I pickup the Yamaha TSR-700 that costco sells, or should I splurge and buy a 9 channel?

[@ealanosborne]

Yeah I'd suggest getting the Yamaha TSR-700. It's a great receiver for the price. And it'll be a great start to an awesome home theater, even though you're not technically using all four upward-firing speakers. The main ear-level speakers and subwoofer alone are a great deal for $599!

[@nexcheets]

@@ealanosborne thank you! Appreciate the suggestions. I’m excited to try everything out.

[@mehulgdoshi]

Hello Ealan, Your channel and reviews are so much helpful! I have recently subscribed to your channel. Today I bought Klipsch reference cinema 5.1.4 Dolby Atmos speakers to upgrade from my current Monoprice premium 5.1 speakers. Currently, I have Pioneer 5.1 receiver which has 140w output, and I am not planning to upgrade my receiver any time soon. However, I am not sure if my receiver is a good fit for Klipsch speakers since it has 50w/75w RSM power handling. Just wondering if my receiver could damage my new Klipsch speakers in any way. Please advise. Thank you very much in advance!

[@ealanosborne]

Not at all! 🙌 Having too much power is a good thing, since that means it will have more headroom to work with. Under powering your speakers is more damaging, actually. But with your Pioneer AVR, just don’t turn it up TOO loud and you’ll be fine. 😄🤘

[@mehulgdoshi]

@@ealanosborne Thank you very much for your response and advice! I will keep in mind not to turn up the volume too loud 😀 By the way, the model number of my AVR is Pioneer VSX-524-K 700W.

[@quzhengxi3414]

Hi Ealan, This set is $600 now, comparing to the 5.0.2 tower one. Which one is better if space is not a problem?

[@ealanosborne]

5.0.2 is still better, I think. But they haven’t restocked it on Costco’s website since Christmas time. ☹️ Maybe they’re going to reveal a newer/better version later this year? 🤷‍♂️

[@quzhengxi3414]

@@ealanosborne thanks Ealan for your quick reply! It’s back with $899 online, but didn’t see it in store.

[@ReverendNaveed]

Which Klipsch sub would you recommend, keeping Blade Runner 2049 chuffing under consideration that I can upgrade the 10" one from this Klipsch 5.1.4 set to?

[@ealanosborne]

Anything in the Reference Premiere line is a step up from the base Reference line. Something like the RP-1000SW.

[@funnyboxers08]

Question- not an expert, I wanted to get these for my room(it’s a master size). I only plan to use the speakers in the box, no plans of adding more since I already have more advanced setup in my media and living room. Can I use a 5.1 receiver then? Thanks,

[@ealanosborne]

Sure! You wouldn’t be utilizing the upward firing Atmos speakers built in, but for the application, this would still be a kickass 5.1 speaker system. There is also the 5.1 Reference Theater Pack for less, but I understand if you want bigger speakers and a bigger sub, and this system is still a great deal for what you get. 🙂

[@tommanno6875]

I have an open ceiling in my basement. Would you recommend sticking with 5.1 or would the 5.1.4 work with the exposed joists in the ceiling?

[@ealanosborne]

Do you mean a vaulted ceiling? I wouldn’t recommend upward firing Atmos speakers with vaulted ceilings. I’d hesitate to recommend upward firing speakers with any ceiling above 8 feet. And yeah, if there are exposed beams throughout, that could potentially mess with sound bouncing around.

[@fabianmaamari6829]

i have a question, i am very interested in buying the Klipsch Theater Pack 5.0 Home Cinema but since i am new in this I am wondering If I need to buy something else in addition in order to connect it to my TV for movies and music or am I good to go? Many thanks 🙏🏻

[@ealanosborne]

Yes you would need an audio/video receiver to tower the speakers. Sony STR-DH790, Denon S760H, or Yamaha RX-V6A are good starting options. 👍

[@fabianmaamari6829]

@@ealanosborne and If I don’t buy a receiver same time I buy the theater pack can I still use it for anything at all?

[@ealanosborne]

@@fabianmaamari6829 No, sorry. It's not like a soundbar. It's a speaker system that requires power from an outside source, so it can't do anything by itself.

[@jadafamily9200]

It is now for $599 in costco. On your recommendation i did $800 atmos setup from costco denon 760 klipsh 5.1 and r41 speakers. Happy with sound output. Will try this and see else will return n slowly upgrade. Thank you for good vdos

[@jazzman9469]

Do you think these sound better than Bose Accustimass 5.1 system?

[@ealanosborne]

Paired with a good receiver, yes. 👍

[@papapun]

Just curious, what level do you play the white noise at while calibrating?

[@mrraju83]

The speakers looks little heavy. About 8lb. Is it a good idea to mount them on the wall? Because the mounting brackets that are available in market are so small. I am not sure those will hold the speaker. Also the mounting bracket design is just holding the globe. Can someone advise?

[@SP0RT-HIGHLIGHTS]

This system is no longer on the Costco site , but it’s all over the place online and for 1/4 of the manufacturers msrp. I had to pick it up despite not owning a 9 channel receiver. Need to pick up a 7, any suggestions?

[@ealanosborne]

Despite it not being on Costco’s website anymore, do you happen to have a Costco membership?

[@SP0RT-HIGHLIGHTS]

@@ealanosborne yeah, I had been eying it all year waiting until today, it was on their site up until a few weeks back. I was hoping they’d have had some in store here in Houston, Tx, no luck.

[@ealanosborne]

@@SP0RT-HIGHLIGHTS Okay sweet. I’d recommend the Onkyo TX-NR6050 that they sell. Little more power and more reliable internals than the Denon S760H. Not by a huge margin, but still better. But if you are a Denon fan, it’s still a good AVR. 😄🤘

[@SP0RT-HIGHLIGHTS]

@@ealanosborne I’m jacked to the tits right now, Ealan. As this interchange took place, I scored and found a display model of the nr6100. What started off as a bummer of a Black Friday, is now probably one of the best of recent memories

[@ealanosborne]

@@SP0RT-HIGHLIGHTS NICE!!! 🎄🙌

[@denisrivera7023]

Hello, which one do you recommend me to buy? This system 5.1.4 or the sonos arc for my living room 3x3 m.

[@ealanosborne]

3x3 meters would do fine with a Sonos Arc, for sure. 👍

[@ladmandiola8868]

I had question, how do you hook up the receiver to your MacPro? Am I to use an optical cable (out) to attach to my Onkyo TX-NR6050 receiver (Optical TV input)? Let me know if that work for 5.1 sound. Thank you.

[@mfahadb001]

Which one is better Reference cenima 5.1.4 or Reference theater 5.1 Suggest some budget receiver for both. I am thinking for sony str dh790

[@ealanosborne]

Cinema 5.1.4 is bigger and better. Sony receiver is a great one. Also Denon S760H or Onkyo TX-NR5100.

[@garygonepostal]

What sounds better as a 5.1.2 set up with a 7 channel receiver? Fronts or backs with the heights?

[@ealanosborne]

Typically fronts, but definitely experiment with both scenarios, since everyone’s room is different. 🤘

[@garygonepostal]

@@ealanosborne thanks. I just ordered these. Been wanting to upgrade from my sound bar and couldn’t resist for $350.

[@72armydad]

So with me not able to hear a lot of low frequency sounds and just bad hearing this would be a good system, or would you recommend something else. Now my wife hears everything, so we are black and white for sound. Also I have high vaulted ceilings. Thank you for your time.

[@ealanosborne]

I wouldn’t recommend this system with vaulted ceilings. Those would require a traditional system, with speakers mounted to the ceiling (or cut into the ceiling) if you want to experience Dolby Atmos height effects. But that’s going to cost more, unfortunately. But even though Atmos is the rage right now, a solid 5.1 or 7.1 traditional system still sounds leagues better than TV speakers and most sound bars 👍

[@NazSef]

Ealan, which do you think is a better buy? A pair of Klipsch RP-160m bookshelves for $200 or the Reference Cinema System 5.1.4 for $400?

[@ealanosborne]

Well, I guess if you listen to music at least 50% of the time, a stereo pair of RP speakers will be better. If it’s mainly movies and TV you’ll be listening to, surround sound all day with the 5.1.4 Cinema system, my friend. 😁🤘

[@NazSef]

​@@ealanosborne Thank you for such a quick reply! What you said is exactly what has me torn between these as they will be connected to my PC that I use for everything: gaming, music and movies. I do listen to music a lot. On PC 5.1 seems to have a bigger impact on gaming immersion than movies for most streaming services seem to be in stereo. I am upgrading from a Logitech z5500 5.1 system from 2006. I decided to give the bookshelves a try first because I have never experienced professional quality speakers. The value of the 5.1.4 system is hard to turn down but its probably less of an upgrade from where I am coming from. I figure I can always add more to the bookshelves over time and that I will end up with a higher quality system in the end. Love your videos, keep up the great work!

[@islandboy8282]

I noticed that in the Setup: Software section, you had the Impedance set to 4ohms. Should that be set to 4ohm or to the option that allows for 6ohms and higher? Thanks

[@GeekCulture101]

I'm getting confused by alot of the stuff would the denon avr s760h or Yamaha tsr-700 be enough to use this speaker pack or no? Had some say yes and some say no..

[@ealanosborne]

Not completely. Those receivers are 7 channel, and to fully utilize all 4 of the upward firing Atmos speakers, you’d need a 9 channel receiver. But they are so much more expensive than 7 channel receivers. But in my video, I explain that you could still get away with an s760h or tsr-700 because the 5 main speakers in the system (and subwoofer) still sound great for the price. But you’d max out at only using 2 of the 4 upward firing speakers. But 2 is better than none! 😁🤘

[@GeekCulture101]

@@ealanosborne thanks. Yeah thats where I'm torn. Its soo much more for the 9.2 recievers. But i want full atmos effect. Whats weird is a few sites sell a similae pack with the 760s . Just trhing ti figure out best option. I'm on a fixed income due to my health so its taking me along time to try and save up to make this happen. So gotta be sure what way i go

[@falkend1fox728]

I know I'm late on commenting but I have the Vizio Elevate 5.1.4 should I upgrade to something like this or will it not be that much of a upgrade?

[@ealanosborne]

I think it’ll be an upgrade to a certain degree. But getting a traditional receiver+wired speakers system typically means you plan to expand and upgrade over time. It’s just a matter of goals and preference. 😊🤘

[@PeteyPablo408]

What receiver do you recommend using with these speakers for optimum performance?

[@ealanosborne]

Optimum performance, Onkyo TX-NR7100 since it’s a 9 channel receiver without pre outs, so it’s one of the least expensive ones out there currently (if you can catch it in stock, though). Otherwise, the Denon x3700h and Onkyo RZ50 are the next least expensive, even though they’re not cheap 😬

[@mikebass2700]

I'm a little late and I got the Reference Theater 5.1 package really like them. But I have a question about the "Chuffing" you mentioned at the 12:34 mark. What causes it? I have the gain turned down really low and it's still doing it. Is it a setting in my receiver (Denon) I need to adjust? Appreciate any thoughts. Enjoyed the vlog! Thx, Mike

[@officiallistengreatmuzik]

I've just purchased a Sony dh790 receiver and now I'm thinking about getting this system. Will it work good with the receiver I have?

[@ealanosborne]

Yes! The only caveat though is that you won’t be able to utilize all 4 of the upward firing speakers. You’d need a 9 channel receiver for that. But for what it’s worth, the 5 main speakers and subwoofer are great, and still make it a great deal. 🤘

[@officiallistengreatmuzik]

@@ealanosborne aww man I wanted all the speakers to work but thank you I may still give them a try.

[@350110thave]

Just got it for 500 lol decided to return the receiver from Costco, was only 7 channel and they still don’t carry a 9….. What receiver do you recommend now? Any sales coming up?

[@ealanosborne]

Honestly, the cost jump from 7 to 9 channel AVRs is significant, so if you wanna save some money at first, going with a 7 channel AVR will still get you a great sounding system, even without utilizing all 4 upward-firing speakers. The 5 main ear-level speakers and subwoofer are still great for the price. All 3 AVRs they sell at Costco (Denon, Onkyo, Yamaha…in that order) are good. The only 9 channel AVR that’s still a decent price is the Onkyo 7100 for $1,100. They all go up from there.

[@350110thave]

@@ealanosborne thanks for your comment and suggestions. I figure I get a hood recover to start now and looks like the price doubles. I was looking for an onkyo tx rz50 but they are so hard to find. Heard any good things VSX-LX305 ELITE 9.2?

[@ealanosborne]

@@350110thave Yes!! Onkyo/Pioneer/Integra are all the same parent company, so they are equally as good, cuz yeah…that RZ50 is nowhere to be found.

[@keithplusthree]

what's a good mount for the speakers? or floor stand?

[@bergforreal]

On sale for prime day for $350. Paired with a onkyo TX-NR696 receiver on sale for $499. Best ive ever had and saved about $1300 on it!

[@ealanosborne]

Incredible bargain hunting! 😁🤘

[@vstolpner]

I know not exactly related, but what are your thoughts on how this would compare to a system with say 4x R-41's, R-52 center, and a 10" sub? I know I lose the vertical channels, but would these be a good starting point while waiting for 9.2 amps to come down in price?

[@ealanosborne]

Most definitely a good option while you wait for 9 channel AVRs to come down price. I’m currently writing a script comparing this and the 5.0.2 Costco bundle, and it has its advantages over the Cinema pack, for sure.

[@Speciulboy63]

These go on sale on the 23rd for $699. Wish i could find the old package that had the towers and only required 7 channels. I did ask a Costco associate and they mentioned they were a discontinued set, so I may have been too late to the game.

[@ealanosborne]

I haven’t gotten any confirmation on this, but they may have discontinued the tower set since the Reference line is getting a facelift and slight improvements, which will be released this Spring. So maybe Costco will release a similar set with the newly improved speakers? 🤷‍♂️

[@Speciulboy63]

Correction, this setup just dropped to $599 today. Kinda hard to pass up

[@adamh9075]

@@Speciulboy63 I think they 7 channel tower system is on sale right now for $100 off / $900 at Costco. Not available for delivery in my area, but it was in the email blast this morning.

[@cackman77]

Would you add a second subwoofer to the 5.1.4 theater pack? Also like you mentioned, set the gain nob to 25 on both?

[@ealanosborne]

Of course. Two is always better than one, in order to really balance the low frequencies throughout your listening space, since everyone’s furniture placement is different, etc. 👍

[@ghostmee6330]

Thank you for your great videos! I really enjoy your sense of humor, makes the videos even more fun to watch. I, like you, prefer seperates all day. I installed this speaker system in my office, which is just a small bedroom, with a Pioneer Elite VSX-LX505. I initially just used basic measurements and settings while setting up the system and it sounded pretty darn good. I then used Pioneers own mcacc to setup the system and didn't really notice much of a difference. I will note though, as you have stated, I was getting a lot of chuffing from the subwoofer. I went into the sub settings and set it to zero and controlled the volume directly from the sub and it sounded much better, no chuffing! I then decided to give Dirac a try and this is where I am floored. Holy crap batman, It really is a night and day difference from everything I tried with this system to this point. The soundstage is just amazing, really pulls you into whatever your watching, sounds very "spacious". My point is that, over the years owning many different AVR's, is that you can have nice equipment but if isn't setup correctly it will still sound like poo. Get in there and tweek tweek tweek, utilize everything the AVR is capable of doing, don't just rely on the AVR's tuning program. Get out a tape measure and mess with all the settings till you get it right. You will be more satisfied with the end results for sure. Tune it to sound like you want it to. This system cost me $850 at Costco and is listed on Klipsch's website for like $1850 thereabouts. You get this sucker setup right in the right sized room, it will deliver big time and at a reasonable price.

[@ealanosborne]

Glad you enjoy the videos! 😊 And thanks for your insight into your system! Tweaking is essential, you’re absolutely right! 🤘

[@nimmagaddavinay6081]

Loved your video. I am interested in buying the 5.1.4 with current deal in Costco @399$. I do not have budget to buy an amplifier so do you still recommend me to buy the 5.1.4? Can i still enjoy the sound of this equipment without an amplifier? Please suggest.

[@ealanosborne]

Do you mean without a receiver? Because this system is a passive speaker system, so they need to be powered by a receiver. You wouldn’t be able to connect it directly to a TV like a soundbar.

[@nimmagaddavinay6081]

@@ealanosborne Yes, i meant receiver. Sorry i am still learning. I only used a sound bar till now so no idea how these speakers should be setup. I was assuming these can be connected directly to TV.

[@ealanosborne]

@@nimmagaddavinay6081 No problem! These are in line with your traditional wired speaker system. 👍

[@viejoqiqe]

What a beautiful explication bro Thanks 🙏🏻 I just bought it from Costco for only $600

[@hectorn7820]

Hey Ealan thanks for the awesome review. Is the 10" sub from the cinema system wireless? Also, this might sound like a dumb question but in your opinion which sub is better, the 10" front firing from the cinema or the 8" downward firing sub from the theater pack (since its a downward firing set up)?

[@bob14775523]

The 10 in in the cinema system is not wireless. I have not heard the 8in from the refrence system bur I have to imagine this 10in sounds better.

[@hectorn7820]

@@bob14775523 got it, thanks.

[@imnothridhay]

Hey i have a question I was planning to buy the new Klipsch Reference Cinema Dolby Atmos 5.1.4 System, so I would like to know if i need an AV receiver or can i connect it directly to my TV my uses includes OTT platforms like Prime Netflix and also i will be playing the PS5 can u please tell me?

[@DroidLocks6971]

I have these system and a denon 7.2 reciever both of which i just bought at COSTCO so I will just use 5.1 surround or 5.1.2 . . . If I use 5.1.2 should I use front heights or back heights .

[@ealanosborne]

5.1.2 using front heights! Or you could experiment with rear heights, depending on your furniture placement, etc. 🤘

[@DroidLocks6971]

@@ealanosborne I'm just using it as a 5.1 surround system and will be adding a 2nd subwoofer soon making it a 5.2 surround system . At Any Rate This System Sounds Beyond Amazing . THEY SOUND LIKE AweSomeNess PerSoNiFied . Other Than The Subwoofer It Comes With This Is The Best Surround System If Owned . I Hear A Huge Difference Over My Last 5.1 System . Thanks To You I Became A Costco Member 2 27 22 And Bought This System & Denon 7.2.2 AVR Both At Costco .

[@Somenondual]

hey Elan, i have 2 polk s60 towers and a denon Denon AVR S760H 7.2ch 8K AV Receiver. do you think the Klipsch Reference Cinema System 5.1.4 will make a good 7.2.4 when combined with the polk i already own. thanks!

[@ealanosborne]

Yeah, I would say so! The main satellites and center speaker of the 5.1.4 Cinema system are great for the price. The upward firing Atmos speakers built in? Not so much…but those Polk s60 towers look great!

[@Somenondual]

@@ealanosborne thank you, appreciate your reply. Might I recommend, if you have the resources, you also do a sound demo for us … it’s the only thing I go to other channels for after seeing your videos. Goodluck.

[@402anil]

@ealanosborne, Than you for the detailed video, I just bought this speaker system and I'm looking for a compatible AV receiver and unable to decide whether this system needs a 7 channel receiver or a 9 channel receiver. Can you please confirm if I can use this speaker system with Costco's Denon AVR S760H 7.2ch 8K AV Receiver ? I want to use all 4 upward firing speakers, could you please suggest me if I can use that receiver or not, Thank you!

[@ealanosborne]

To utilize all 4 upward firing speakers, you would need a 9 channel AVR. Costco only sells 7 channel AVRs (at least for now). A 9 channel AVR I’d recommend is the Onkyo 7100, which is currently on sale on Crutchfield.com for $899. Still pretty expensive, I know, but one of the best (and cheapest) 9 channel AVRs right now, especially when it’s on sale. 🤘

[@JasonYorkTech]

Will you be comparing this system to the SVS prime satellite system? I would love to hear comments about soundstage, imaging, bass, overall clarity etc between the two systems.

[@ealanosborne]

Hadn’t thought about it, but I’d be curious! Although from what I remember when I did review the SVS Prime 5.1 system (but sadly had to send it back), the quality of SVS’s speakers would be slightly better, more neutral. And no question the SVS PB or SB-1000 Pro subwoofer blows this intro Klipsch sub out of the water! 😀🤘Although no Atmos with SVS, but I don’t think that’s a deal breaker since the Klipsch upward firing drivers are…meh

[@minkoil00]

So you have to have a av separate av recover to run use it?

[@ealanosborne]

Correct. This can't connect directly to a receiver like a soundbar.

[@KwakuAmoabin]

Was this a 9 channel or 7 channel receiver in the video? Also, what model was it?

[@ealanosborne]

9 channel. It’s an older Onkyo TX-NR787. The modern day equivalent is the Onkyo TX-NR7100 🤘

[@crhoneh]

You have a rough time table on when the video for the comparison between both of costco atmos systems will be out?

[@JTRumpet491]

Is it worth it at $500? I'm looking to get into my first home theater ever after over a decade of 2.1, but the receivers that can power this setup are sometimes twice as expensive as the speakers themselves

[@ealanosborne]

It’s worth it even just for the baseline 5 speakers and the sub. The upward firing Atmos speakers are just icing on the cake. With that being said, I’d say even pairing these with a 7 channel AVR is worth it, even tho you’d only be utilizing 2 of the 4 upward firing speakers (since you know as well that the cost of a 9 channel AVR is much more expensive). 👍

[@JTRumpet491]

@@ealanosborne I ended lucking out and getting this entire set for $300 brand new (waiting for delivery). I also got the TX-NR797 for just over $500 as well, so I'm definitely going to be referring to this video for setup. Thank you so much!

[@ealanosborne]

@@JTRumpet491 Nice!!! My Onkyo TX-NR787 was my primary AVR for several years. 🤘

[@JTRumpet491]

@@ealanosborne I'm just getting started so I'm stoked for delivery day haha. What speaker stands were you using here? Thanks again for the help!

[@ealanosborne]

@@JTRumpet491 I had some stands sent to me by Aperion Audio (which they sell on their website), which I was grateful for, since they’re expensive. 😬 But these (link below) are probably the best for the price. Not the greatest, but decent enough for the Cinema pack. 🙌 amzn.to/3bryudo

[@someswararaoe]

I have Onkyo TX-NR696 which is 7.2 channel but it has zone 2 also. Can I connect this system to my TX-NR696? Can I power all the speakers and their upward firing speakers? If yes, should I be aware of any specifics? Any response is greatly appreciated!!

[@ealanosborne]

That Onkyo can only process 7 channels at once. So even if you use Zone 2, it limits the rest of the receiver to play only up to 5 channels. But you could still get away with 7 channels powering this Klipsch Cinema system. Sure, you're not getting the full effect, since you can only power 2 of the 4 upward firing speakers, but the main satellite speakers still sound really good even by themselves!

[@antsmith5956]

Hi, I have a Klipsch Ref. 5.1.4 Cinema System and an UNKYO TX-NR6050 (7ch). All speakers sound great except for the rear satellite speakers. I only hear slight audio from the rear satellites and a whisper from the rear-upfiring speakers. My setup is 5.1.2...Are my speaker connections wrong? Maybe a setting isn't turned on?

[@ealanosborne]

In order to get any audio information out of the rear height satellite speakers, you need a 9 channel AVR. 5 ear level speakers + 4 height speakers = 9. You SHOULD be getting audio out of the ear-level rear satellites, so I’m not sure what’s going on there. But if you have assigned the front height speakers in your 5.1.2 setup, you shouldn’t be hearing anything out of the rear heights anyway. 🤷‍♂️

[@antsmith5956]

Thanks for responding...The wires weren't fully connected, but now everything's working great. @@ealanosborne

[@ealanosborne]

@@antsmith5956 Awesome! Glad it’s working! 😁🎉

[@adidasjoel17]

i've been eyeing these for a while now and this was a great video. it answered a lot of my questions like receiver to pair them with, wire gauge, and other set up info and made me think about the details i was wondering about so i can make a more educated purchase. thanks! great job

[@ealanosborne]

Awesome! Glad I could help! 🤘

[@ismaeljrp1]

This set is around $550 now. Is it a good deal and beginner surround system, considering other options?

[@ealanosborne]

Absolutely. You honestly can’t get much better for the price for a complete starter pack to 5.1 surround (and then some).

[@ismaeljrp1]

@@ealanosborne thank you so much!

[@arbuilds]

If I were to choose from ur other video Dolby Atmos under a 1000 dollars (Klipsch reference 5.1 + 2 book shelf speakers paired with Sony str-dh1080) vs this Klipsch ? Which is better ?

[@ealanosborne]

Hmmm…that’s tough because the main speakers and subwoofer from the 5.1.4 Cinema System are better. But having 2 little satellite speakers mounted for Atmos speakers is better than upward-firing speakers…so if you can find 2 extra satellite speakers on sale and went with the 5.1.4 Cinema System, that’d probably be best! 😄

[@PeacesEnd]

I sure hope this doesn’t sound silly, but I’m not understanding the 0.0.0/0.0 scale everyone is referring too, what do those numbers mean, and what receivers are compatible with them?? I’m wanting to buy the 5.1.4 Klipsch your reviewing in this video, but I have no idea what receiver to get without spending $1000 on a new modern one. Which receivers will work with this system, and I do mean work with them comfortably. I want a budget receiver but I also want something that borderline kinda pushes the limits of this package’s capacity of immersiveness. Please help!!

[@ealanosborne]

There are no silly questions here! 😁 The first number refers to the number of ear-level speakers. The second number is how many subwoofers the system has. And the third number refers to the amount of height speakers. So this system has 5 ear level speakers, 1 subwoofer, and 4 upward firing height speakers (the kind that bounce audio off your ceiling). But that doesn’t mean you HAVE to utilize all the speakers. You could still save money by getting a 5.2 channel receiver and just connect the 5 main satellite speakers and subwoofer. To utilize ALL the speakers in this system, you’d need a 9 channel AVR. But again - to stay on a budget - you could get by with a 7 channel AVR and just use 2 out of the 4 upward firing height speakers. Denon X2700H or Sony AZ1000ES would push it to the limit. But if you don’t wanna spend that much, the Onkyo 6100, Denon S760H or Sony DN1080 are less expensive options that are still solid. 🤘

[@ftdlima]

Is this 5.1.4 kit good to use with the Yamaha TSR-700 receiver? Your channel has a lot of great information😀

[@ealanosborne]

Thanks! And yeah! Even though a 7 channel receiver doesn’t utilize all 4 upward firing speakers, the jump in cost from a 7 to 9 channel receiver is significant! But the 5 main ear-level speakers and subwoofer are still a great value for what you pay, so I’m not opposed to doing a 5.1.2 system on the TSR-700. It’ll still sound great for a bargain. 🤘

[@nyquil07na38]

I was talking to an employee in costco while I was looking at oled's. They said they are planning on having more options next year for in store at least. We will see what those options are.

[@aroubin]

Thank you for such detailed review. I impulse bought this on sale for $360. Worth it? My sub is Onkyo TX-NR6050 (7.2) so I won't be able to take full advantage of this speaker system. Plus I don't know if and when I will get a chance to run the wires for the back surround channels. I currently have Klipsch HD 300 HT speaker system, they are tiny in comparison, and I am running them in 3.1 config. Should I hang on to these especially at $360 price point and setup in 3.1.2 config for now? Or just purchase a couple of nice satellites, center and a sub to give my current setup an upgrade?

[@ealanosborne]

I still think this Klipsch Cinema 5.1.4 system is a steal of a deal, so it’ll be a nice upgrade from your current setup. I say go with it for now (3.1.2 or however you want), since everything else beyond this system will cost twice or three times as much anyway. It’ll be a good stepping stone for when you decide to upgrade later down the road. 😎🤘

[@aroubin]

@@ealanosborne Thanks! Yeah I leaning toward keeping this system.

[@tlaice]

Are this speakers good for small living room and what avr are good for klipsch or better buy svs 5.1 system seen i have 1 set of atoms svs ?

[@ealanosborne]

If you can afford the SVS 5.1 and an extra pair of SVS Elevation speakers, go with that. Otherwise, the Klipsch 5.1.4 system is good for a small living room. To use ALL 9 speakers in the 5.1.4 Klipsch system, you'll need a 9 channel receiver, but I know they are much more expensive than a 7 channel receiver. But if you want to save money, you could still use a 7 channel receiver and just not use 2 of the atmos height channels. It will still sound great that way. Good entry-level receivers are the Sony STR-DH790, Denon AVR-S760, Yamaha RX-V6A, and Onkyo TX-NR5100.

[@tlaice]

@@ealanosborne i have now onyko 696 but want go to 9.2 for 5.1.4 see if i can buy in end of mai cross fingers ;) plus my neighbors wil hate if i buy this lol but use most on day small at night seen on live in rental blokk my english is not very good am from iceland ;)

[@ealanosborne]

@@tlaice Æðislegur! Ég held að nágrannar þínir muni ekki kvarta of mikið ef þú notar það aðallega á daginn. 😁

[@ericmatthews8497]

ATMOS needs to come with a disclaimer.. especially for people with good 5.1 and 7.1 surround speaker setups. Every additional set of speakers has a greater diminished return for the investment. Adding 2 or 4 height speakers isn't going to "blow your mind." ATMOS receivers will send the same height channel sounds to your existing surround speakers. Which were ususally placed higher than ear level to begin with. You are not "missing out" .. the sound will play .. and it will be natural. You are not going to think.. "Who... that should have come more from above.." You simply won't notice the difference .. especially with your focus toward the action on the screen. ATMOS also irritates me. Every diagram of ATMOS speaker placement has you sitting on a loveseat or sofa with a very low back, in a very upright position. It's more like a media room than a home theater. For home theaters, seating is as important as the screen and the sound. Power reclining seats with adjustable headrests and cup holders are great. Even if you aren't reclined, they are still more comfortable than a low back sofa. If I ever build another home theater (which I probably will) I'll go ATMOS. But the extra cost and hassle to upgrade my existing 7.1 theater probably isn't worth it.

[@ealanosborne]

Very true. A solid 7.1 or 7.2 can still beat out a so-so Atmos system with the right equipment. 🤘

[@74craines]

@@ealanosborne And that is what i am “struggling” with right now. I am spec’ing out my first big boy theater set, with a budget of around $3500 (speakers and receivers), and your review videos are helping (along with a few others), but I am also finding myself going down a rabbits hole of other speakers. I just stumbled on these Jamo, and on the surface and from a few video’s, they seem very solid. I had decided to go with the Klipsch Reference Dolby Atmos bundle, but Costco keeps running out of them. Because of that, and from some reviews I have seen, I am thinking about the Jamo’s. But…. Based on what you said about going 7.2 vs 5.2.2, i am now wondering if the Atmos is the way to go, or have pure side and pure back speakers. So much to think about, and i am not sure that there is an exact right answer.

[@ealanosborne]

@@74craines Alright...Jamo is having a ridiculous sale on Crutchfield right now. If you were to get: S 809 Towers (pair) Concert C 93 II Bookshelves (pair) Concert C 9 Surrounds (pair) Concert C 9 Center C 912 Subwoofer and a Marantz SR6015 (on Crutchfield), that would be a total of $3,354. But if you can find a used SR6015 or even Denon X4700h, or if you can hold off until the Onkyo RZ50 is available, you'll have enough for all that AND an Emotiva BasX A7 to power all 7 of your speakers externally. Otherwise, if an external amp is something you'll worry about later, I'd honestly use any leftover money for acoustic treatment, or nice speaker stands, or wall mounts, whatever. How does that sound? Although I'm not sure how long that Crutchfield sale will last...

[@74craines]

@@ealanosborne two questions. If I go for the Denon 3700, that still gives me two channels to play with (along with some more money left over from my budget). Should I get the atmos upward firing speakers for the front towers? Secondly, do the bookshelf speakers go to the side or the back? I was just not sure where to place the surround speakers, since they are kind of facing in two different directions. And, do they face up and down, where the top speaker would bounce off the ceiling, or do i place the surround with the speakers facing left and right? Sorry for the tech questions, just trying to wrap my mind around all of this. Thanks in advance.

[@ealanosborne]

@@74craines 1) What is your ceiling height? 2) It’s tough to find an available X3700H, so that’s why I suggested SR6015. 3) Since you’re wanting to start the foundation of your Big Boy system, I would honestly not get any upward firing speakers. Big Boy systems with in-ceiling or ceiling mounted speakers are a must if you want true Atmos effects you can hear and feel. So I would personally spend money on a killer 7.1 than a decent 5.1.2. 4) Bookshelves would flank your listening position, and the surrounds would be placed behind you pointing at the listening position, not up towards the ceiling. Although that is much easier to pull off in a dedicated home theater that HAS a back wall…5) Bottom line is, spending money now on upward firing Atmos speakers may not be the best way to go about it. Unless you want to get something like the Elevation speakers from SVS and mount them. But getting into the Big Leagues means discrete speakers firing audio directly at your ears, not reflecting off the ceiling. 🤘

[@dflintstone850]

I have the Onkyo TX NR6050 and the KLIPSCH 5.1.4 theater pack. However during the configuration process regarding speaker channels, it only went up to 5.1.2, am I doing something incorrectly? Best regards

[@ealanosborne]

No. The NR6050 is only a 7 channel AVR, so it maxes out at 5.1.2. The NR7100 is the cheapest new 9 channel AVR on the market which will support a 5.1.4 setup. But I mentioned in the video that it’s still a good bargain to get the NR6050 since the 5 main speakers and subwoofer of the 5.1.4 Cinema System are a really good deal on their own. It’s such a huge jump in price to move up to a 9 channel AVR, which is silly, IMO.

[@jaimeguaderrama931]

Would you recommend this system for a small apartment?

[@ealanosborne]

Hell yeah!! Although preferably on the first floor. Second floor and up might get some complaints from your neighbors below. 😄

[@trevnologies]

I used regular banana plugs on the receiver side and then got flex pin banana plugs for the speaker side and it worked great!

[@ealanosborne]

Nice workaround! 🎉

[@amsenthil28]

Thanks for the great review.. can we assign / configure a Denon 7.1 AVR to play the Height Speakers (all 4) in this model ...?

[@ManishKumar-zm1by]

Hi Ealan, great detailed review. I had one question - currently I have 7.2 receiver with additional 2 channels for zone 2 but at the same time it can only power 7 channels. I have 2 pre-outs as well for front R/L. My question is, to use these klipsch speakers will this config work? by pass the front R/L to one of my additional amplifier, then use only center+surround(R/L)+height 1for front R/L atmos and then zone 2 for back R/L atmos. This way my AV can give power to these 7 channels and front R/L can be powered from my additional amplifier. Thanks for the help.

[@ealanosborne]

Nah, I wouldn’t recommend that. Since the upward firing speakers are fairly weak, I’d just recommend NOT using 2 of them - probably the rears - and set it up as a 5.1.2 system, since the main ear level speakers are still great on their own. 🤘

[@ManishKumar-zm1by]

@@ealanosborne thanks for the reply. Sorry didnt get on weak point, does that mean zone 2 has more power output which can damage speaker or degrade audio quality? also but just checking on technical feasibility if that config is possible at all?

[@ealanosborne]

@@ManishKumar-zm1by No, I’m saying the upward firing speakers themselves are pretty weak. But even if your receiver has more than 7 speaker terminals (main+zone 2, etc) doesn’t mean it can process all those channels. If you’re using all 7 channels in your main listening area, that’s all that your receiver can handle. If you use only 5 channels+zone 2 in another room, that’s possible, but there’s no way you can use a total of 9 channels using 7 channels in one room, and zone 2 simultaneously. Make sense?

[@ManishKumar-zm1by]

@@ealanosborne Are you saying even if Im using pre-out for front R/L and AV is not powering front R/L speaker channel ports, its still using 7 AV amps? Isnt it only 5 amps are being used for(center+surround R/L+front atmos R/L)?

[@ealanosborne]

@@ManishKumar-zm1by I’m saying that it’s only able to process a total of 7 channels, even if R/L are being powered by an external amp. Unless I’m wrong about the model - what brand and model is it?

[@garretts431]

Compared to the focal sib evo 5.1.2 theater in a box, is the klipsch worse or better? I want to pair with a pb2000 sub with whatever I go with. Also what wire for this - 16gauge?

[@ealanosborne]

Focal all day, but it definitely costs more. 🤷‍♂️ And I typically use 14 gauge wire. More durable and lasts longer. Worth the extra money. 👍

[@hamitcampos4989]

Ah way cool. So how much better then the regular pack iss it though?2 times, 4 times, more? Also a quick question on the regular 5.1 pack. I have an Onkyo TX-SR 373. I guess if the speakers are 70 something wats like these it perhaps should do. Will it though? Or would you recommend a newer more epic sounding AVR?

[@GreenLittleRobot]

Quick questions. What budget klipsch subwoofer would you recommend to pair with thia system? One that preferably goes below 32hz. Should i replace the stock one or add it and run duel subs? Thanks

[@ealanosborne]

The Klipsch SPL-120 is currently on sale on Crutchfield for $399 (usually $849!) and it goes down to 24Hz. There are some cheaper subs in SPL Series on Crutchfield, but I thought I’d start with the SPL-120 since it’s a really good deal. The Reference series subs aren’t that great, so I’d steer clear of those. Long story short, I would def upgrade the sub that comes with that 5.1.4 Cinema package, if possible.

[@GreenLittleRobot]

@ealanosborne Thanks a lot for info. I'll look into that sub.

[@rishabhbhattarai6358]

My house currently has wires for a 5.1 channel, so rear surround speakers, front L and R and center. With these atmos speakers, are extra connections required for atmos features?

[@ealanosborne]

Yes, that’s correct. The Atmos speakers count as their own channel, so they require their own separate speaker wire

[@keith2324]

I'm really looking forward to that review. I already have a Klipsch sub mated to Bose Acoustimass cubes as my home theater setup. I have my heart set on the 5.0.2 system. Thanks for all of the great videos!

[@jlane7731]

Did you set the Dramatic EQ setup?Also you're right about sub..I use it as a second sub,But turn it down low..Its just too loud..Overall they sound really good! thx bud! But my system is the old one without the upward firing speakers!Still enjoy its sound anyways!.but sometimes it just seems to be missing something!

[@solomonshv]

i got these today, but only now realized that i need a 9.1 channel receiver. i currently have a 7.2 channel ATMOS receiver with a 7.1 channel non-ATMOS speaker set up which is... ok, but the speakers are getting old and don't sound quiet as good anymore. not sure what to do. i don't want to spend anymore money. current plan is to not use the rear upward firing speakers until i'm ready to get a better receiver.

[@ealanosborne]

I mention in the video I don’t object at all to using a 7 channel AVR since the upward firing speakers are just okay. And also, try and experiment with which Atmos speakers you end up using. 2 channel Atmos doesn’t have to be up front. It can be in the rear if you want. Whichever gets the better effect in your home theater space. 👍 But honestly, since you already have speakers, I’d suggest using 2 of your existing speakers and mounting them on the wall above the TV, on the ceiling, or even behind up high, pointing them down at your listening position. The ear-level Klipsch cinema speakers are fantastic! So using 2 existing speakers for Atmos would actually be the optimal 5.1.2 setup for now.

[@DBD801]

These aren’t only a “intro” surround I’ve been running big cerwin Vegas for my setup and a quad 12” separate subwoofers. I think it’s time for me to tone things down a bit definitely going to choose this system

[@rulovivar1169]

hello which receiver do you advise that can be used with these speakers you are talking about

[@ealanosborne]

Any 9 channel receiver, although it’s hard to find a cheap 9 channel receiver nowadays. Cheapest is the new Onkyo TX-NR7100, or even cheaper is a used TX-NR797 or NR787. Otherwise, if you can afford more expensive options, there’s lots: Denon X3700H, X4700H, Marantz SR6015, sr7015, Yamaha RX-A6A - but a lot are temporarily out of stock. Weird times in home theater…

[@erikhaluzak123]

Thanks again so much for the video! Per my previous question during the unboxing.... With a 24x24 room with 16 foot ceilings is there a surround sound system that would work well out of the box? $2500 budget.. Thanks sir!

[@AnticRecovery]

They change the model #'s @ Costco & Sam's Club to be Warehouse specific. That way Best Buy, Amazon, etc... can't price match.

[@qseph8624]

I have 7' ceilings in a basement would these sound ok and what would be a good entry budget receiver for this pack.

[@GertiEri-83]

Hi there... What receiver are you using in this video? Thanks in advance...

[@ealanosborne]

It’s an older Onkyo TX-NR787 9 channel receiver. The modern equivalent is the NR7100. Although Sony also has a new 9 channel receiver coming out soon - the AZ3000ES.

[@zinzongetsu8837]

I picked up this system a few days ago for 300 bucks and absolutely love it

[@corealenin1]

So for the 5.1.4 is it a 7.2 or 9.2 reciever that's needed?

[@ealanosborne]

9.2 receiver - 5 ear-level speakers + 4 height speakers = 9. But i understand that 9 channel receivers are WAY more expensive than 7 channel. So you can definitely get by with a 7 channel receiver and just not use 2 of the upward firing Atmos speakers. Totally doable.

[@corealenin1]

@@ealanosborne thanks for the info, 9.2 recivers are extremely expensive. Seems like it isn't worth it

[@shaykoehler5582]

I wonder if they will be replacing the R-12SW? It’s not on the website and the stores are not getting any more product in. And they just dropped the new Denon 760 receiver at my store.

[@kapeedxerxes]

Hi Elan, I am from India and planning on getting this system. My room is small 10ft by 10ft and ceiling height 10ft. Will this system provide me with good Atmos experience. I am having a pioneer lx305 9 channel AVR. I am currently having a Polk signature bookshelf speakers right now , i feel like it is huge for my room and it sounds boomy and i have to turn my volume way up to hear the treble.

[@ealanosborne]

The 5 main speakers in this bundle are a great value. But the upward firing Atmos speakers are just okay. And with 10 foot ceilings, you’re honestly not going to get a noticeable Atmos experience. 😕 If your Polk speakers are too boomy, they might be too close to a wall. Or perhaps you can try to change the EQ of certain speakers by reducing the frequencies 120 Hz and below by about 3 dB to start, and experiment further, having the subwoofer take care of the low end. 🤷‍♂️

[@kapeedxerxes]

@@ealanosborne . Thank you so much for the reply. If i pull the speaker any further It will be very close to the listener. I am getting an used 9 small jamo Satellite speaker at a bargain price. I will try to use this as 5.1.4 with HTS 10 as subwoofer. Do you think this is a good idea. I am kind of experimenting as it is real hard to get to audition speakers where I live.

[@stetbro]

Why are you not the first result when looking up surround sound info? I used to sell this stuff at best buy like 15 years ago, and just now am I starting to look at a system for my new house. You've answered a lot of questions, but only when I finally put in very specific terms searching for WiSA answers. Thanks for the info, you definitely helped me decide on my new system, and saved me from buying a yamaha receiver that wouldn't have fulfilled the requirements of these klipsch speakers!

[@ealanosborne]

Yayyy! Glad I could help! And thank you for the kind words! Much appreciated! 😁🤘

[@DerekSanford]

Hi there! I just bought a Denon AVR-S760H receiver and the Klipsch HT50 Home Theater Surround Sound 5.0 System, but ended up returning that open box speaker set because it was missing the rubber feet for the stands. That said, would this setup be better than the HT50 setup? I can't believe this is selling on Amazon right now for $429.99! I currently have a set of 4 Bose Model 141 speakers, 2 Onkyo Model SKF-100's, a Bose video speaker as my center channel (only a single speaker though, not a real center speaker), and an 8" Onkyo sub. I have vaulted ceilings where my tv is, so I thought about the 5.1 theater set, but this Atmos set has a bigger sub and the other speakers are larger too. My receiver is only a 7.2, but would this system be good for me regardless? Thanks in advance!

[@ealanosborne]

Yes! Since the speakers are larger than any online photo can capture, they would work well with your situation…at least if running a 5.1 (or 7.1, if you decide to use a pair of your current speakers). Since you have vaulted ceilings, the up-firing Atmos speakers won’t do anything at all, so I’d keep it at 5.1 or 7.1. But I agree! It’s one of the best complete systems you can get for the price! 🤘

[@DerekSanford]

@@ealanosborne Awesome, thanks for the response! So to confirm what I think you’re telling me… it’s still better to get this set and not use the upward firing speakers (and use two of my other speakers as my atmos), correct? Rather than getting the other set with basically smaller everything.

[@ealanosborne]

@@DerekSanford You got it! It’s always best to have separate speakers mounted up high, firing audio directly at you, as opposed to bouncing audio off any surface. 👍

[@proxximo99]

on the fence to either get this or the SVS prime 5.1...any input would help

[@ealanosborne]

If SVS Prime 5.1 is in your budget, get that, even though it doesn’t have upward firing speakers for Atmos. The subwoofer makes up for it. It is far superior to the so-so sub that comes with the Klipsch.

[@johnclement9044]

Which receiver want to buy..

[@ad78]

Im a Costco fan and thry have good lineups for speakers. But his time ill go for Klipsch the fives since im putting them on my garage.

[@vincentorona163]

I have the 5.1.4 klipsch cinema reference package do you recommend getting the 250$ klipsch subwoofer to run 5.2.4 system or is the difference sizes in subwoofer undesirable?

[@JP-ts8oy]

May I ask what you think about the atmos feature ?

[@CalCobra]

Finally, we have 5.1.4 thanks to a Black Friday special on the Onkyo TX-NR7100! Got everything setup, ran Dirac LIve and wow this is impressive for the money! The crossovers Dirac Live set were interesting (well below the Klipsch datasheet specs), but it sounds great. Atmos up-firing is okay'ish, but even if you just used the Klipsch Cinema Reference HTIB for a 5.1 setup, it would be great for the price. You definitely get more audio immersion with the Atmos up-firing speakers, but I wouldn't say it's earth shattering. Super Tramp Breakfast in America in FLAC sounds great on these speakers, amazing even for the price. I'm LOVING the Onkyo NR7100, incredible piece of home theater/audio tech.

[@ealanosborne]

Dude, that’s incredible! And yes…the 7100 is SUCH a fantastic AVR with all its features, especially on sale! Hooray! 🎉

[@tewoj10]

Do you have any advice for budget dolby atmos reciever for that speakers? Thank you.

[@ealanosborne]

Not really, unfortunately. Especially right now with so many receivers out of stock or being delayed with their initial release. I’d suggest the Onkyo TX-NR7100 when it finally comes out, or older used Onkyos on eBay, like the NR787 and NR797. They’re the only budget 9 channel receivers you’ll find. Maybe an older Pioneer receiver too.