Garage Overhead Storage (Timelapse)

Putting overhead storage in my garage. Garage reclamation project is in effect.

[@gibson7654]

So many people disliking this video don't realize how much effort it is to put it together and good heart to share it with the rest. Shame. Thank you for this video.

[@kevinatspeed]

FINALLY A GOOD SONG DURING A TIMELAPSE.

[@gootubeperson7581]

You measured the spacing between the 2 pieces of wood 14 times. Nice!!

[@itv6669]

Good video with lots of good ideas and DOs and DON'Ts. Timelapse video saves a lot of time during learning....

[@JS-zz3wt]

strong storage to be able to hold you before it is complete. great job!

[@2themaster]

Standing the 2x4's up on the bottom would have been a better idea. It would have been a lot stronger. When you were laying on it, it was sagging big time. Nice project!!

[@guillaumekircher18]

Easy to use and effective

[@jeffstanley4593]

I am going to do something similar but am going to use wire cable attached to the rafters and then the shelf. The shelf will be solidly attached to the wall and only the end will be cable supported so that it will not be unstable. I am going to use the cable because it will be a minimalist way to support the shelf and still work. Also, I have some to use!

[@kennethcole02]

he done a great job . Bravo Man. i dont see why people have to unlike this video .

[@tomjames6824]

Yes! I was searching for a project such as this! It'll definitely be a HUGE help while I continue to look at Woody Hyezmar's plans which I found on his website.

[@Miguel1485]

The point where you think "I really hope this holds me up". Well done!

[@trufe4]

Stongly suggest ties/ hangers, and bolting the bottom crossmembers tot the verticals.. and one section wide enough to fit through in the middle for unstoppale storabilitagizing.

[@nastythomashobbs]

very nice work. Really adds value to a home when storage solutions are done right and look good. A garage should never be drywalled. Too much moisture. All should be built with 3 quarter inch sheathing with the studs indicated IMO.

[@southernreign1]

Thank you SO much for posting. Best video I have seen on do it yourself shelf building in a while. Only thing is maybe you can put a large battery operated clock where we can see ACTUAL REAL time construction. Looked like it took you a good part of the day to complete

[@kareemakhashab7422]

Thanks Jake ,Very good Achievement .

[@flgators12971]

Damn, didn't know you did that.....You Goooo Mr. Carpenter.....Nice....

[@UKBB]

Now that's confidence 5:38

[@iwantosavemoney]

lol the music over and over and over and over how appropriate

[@Desocaman]

Very clever. Good job.

[@jforo3281948]

Very nice...just what I was looking for and will be easier for me since I have open ceiling. And don't mind those nay sayers thhi is a good design and if they don't like it they don't have to use it and if they don't like the music they can mute it. Thanks to sharing.

[@JakeJohnson-X]

Did use angle brackets all around. I went with planks because I like to see what's up there through the gaps.

[@stevew3978]

This project is truly a labor of love. You get my thumbs up. But if it were me, I would rather spend less money on a heavy duty, 1000-lb capacity, commercial metal rack with much easier access and get it over with in an hour or two.

[@Justanotherunboxing]

nice job. alot of inspiration

[@txfloods]

Well Done!! I thought this was a good project and a well shot video. Gave me exactly the idea I was looking for. Ignore the naysayers.

[@xblackjeepx]

Gave me the idea I needed for my garage storage. I especially like the "wife help". Did you use angle brackets on all the 90°s? Also, any particular reason you used planks and not cut some plywood for the flooring?

[@Pamika105]

Great Job, Please come build one above our garage door. I promise NOT to tell at ya.

[@cindysahli5344]

Great Job i am planning the same thing do you have a list of the materials you used?

[@BOHICA_]

How much was spent on materials? Is this worth doing or buying a Safe Rack system for about $200 that weighs significantly less, yet as strong if not stronger, be a better solution?

[@treffryraxter]

Do you stand by your work? No I stand on it that's how I know it'll hold.

[@tobyandmike]

jake, what size lag bolts did you use for ceiling

[@codysett1]

I'm confused what the 2x4 going across the top does... It doesnt have anything hanging from it...

[@NITEGOD]

Everyone is suddenly a rafter storage pro.. ?

[@phackqu]

Fuck that, great job! Framing it on the floor first would of made it heavy as fuck and using 2x4 seems more secure.

[@lighthouseworshipcenter3748]

nice job. a little on the over kill. but nice

[@1FrenchConnection1]

Good job I'll be the first to give you a thump up!!!

[@raheelhameed1]

awesome!

[@Whissht]

Haha frame it on the floor then hang it! You don't do much DYING do you! Nice job , I was surprised to see you get up into it. Is the ceiling drywall? If so how did you attach the boards to the drywall and make it that strong? How thick is the drywall also?

[@essanta]

he attached it to the rafters in the ceiling.

[@stamm321]

wow. yeah.. he attached it to the drywall- he has the super strong type! the stud finder he was using was just for show. >rolls eyes

[@DanielVoyles]

And how would you suggest he lift the 150+ lbs of lumber by himself up to the ceiling?

[@thisismyjunkmailboxforyour9172]

YOU don't do much diy'ing, do you? Something like that doesn't fasten to drywall. The first 15 seconds was using a stud finder and pre-drilling the rafters.

[@Whissht]

I think you were misunderstanding me. I was laughing at someone else's comment who mentioned why didn't he build it then hang with which I laughed and said that wasn't possible.

[@drsbrettsavage]

Frame it on the floor and then attach it? Save hours climbing up and down?

[@JakeJohnson-X]

Let me know how that works out for you.

[@JakeJohnson-X]

Awesome

[@latengocomoburro]

To heavy to lift on your own, I would I done it the same way as he did.

[@nastythomashobbs]

latengocomoburro ya lol trying to line up the lift with the studs with only your wife for help. I do not argue with the wife often but tempers flare when I need her help with a project. I only ask her for help when every other option has been exhausted,

[@jeffstanley4593]

nastythomashobbs Right, only when it is a last resort.

[@danielevan4458]

What band? what songs are playing? Props for doing this alone! I'll be attempting this soon, inspiring to see it done without help.

[@boroarke]

Daniel in the lions den. Silversun Pickups

[@metamech7383]

I would have used lag screws and bolts. But hey, I've seen some that use nails and glue for shelves...

[@dynomike1964]

The silversun pickups

[@ghe426]

Sagging issue with floor supports installed on the flat!

[@MyHairyChin]

Whats the name of the band playing while we watch this great build?

[@JakeJohnson-X]

Silversun Pickups

[@LAnonHubbard]

+MyHairyChin Darude - Sandstorm

[@Kittycat822]

Has anyone thought about the actual load the rafters are engineered for and adding all this weight?

[@comspyder]

OK I am interested in doing this, but how much weight do you think this will hold though?

[@uvargas30]

Thanks, this is exactly what i was looking for

[@tsnstt]

What kind of screws/bolts did you use?

[@BigDaddy5]

how has this held up over time??

[@TranTheClever]

Now I’m trying to work out what room I can put one of these in🙂😂 2:27

[@rollformer5660]

Very fast video :)

[@kenbryan8387]

I mean, this was so hard to watch. But it works I guess.

[@JakeJohnson-X]

So don't watch it

[@kenbryan8387]

@@JakeJohnson-X no disrespect, just a better way to do it. Glad it works for you.

[@liyistv]

What kind screw did you use?

[@chupacabbra5606]

where do these people find this music? i am 50 yrs old and i have never heard this crap.

[@ad-rock603]

We dont care how old u r

[@rogernelson67]

did you know rafters are not designed for this

[@colletski]

What if they weren't rafters, but rather under spanned ceiling joists?

[@jeffstanley4593]

What is wrong with using the rafters in this manner assuming they are not overloaded?

[@chupacabbra5606]

jeffisgod you dip shit. what if there were no rafters.

[@BOHICA_]

Aren't the rafters attached to the roof? He's working with the joists of the garage.

[@helmet098]

Do you have any idea how happy I would be to see that shit fall with you in it? Omg I would love it! Lol

[@Miguel1485]

@5:39 that is

[@DeadBunny6597]

drilling for oil? lol

[@colletski]

One of the worst designs I have ever seen... and perpendicular to the joists is a must... he must have been told how to do it by a home depot emoloyee 😂

[@TheSeattlehunter]

waste of time 2x2 and plywood would have done the job.

[@tybrown4540]

Great idea,The music sucks,don't need it.

[@SmokinGun55]

Good video but REAL aggravating music. 👎👎

[@jacobwillow050]

worst design and carpenter EVER!