Garage Remote Battery Replacement

[@jag1870]

Best damn Genie remote video on KZbin! Thank you sir!!

[@knowledgeseeker31]

Thank you. Of all the videos I viewed, you are the only one who mentioned that it is possible that the remote may need reprogramming. 👏🏼👏🏼

[@Iscaper]

Glad it helped.

[@arrantsmcswain4819]

Thanks for showing how to reprogram it after the battery change. Solved my problem!

[@johnvgig]

THANK YOU!!!! You saved me a lot of time. I didn't realize I had to relearn the remote after I replace the battery. My remote also didn't work again, after battery replacement. Thank you, again!

[@Iscaper]

You're welcome!

[@pcj8029]

This is far and away the best video on this topic. Straightforward and simple. It's even better than the instructions on the Genie channel. Thank you.

[@Iscaper]

Thanks for watching.

[@martasimpson5476]

Great Video I'm 74 years old and this really help

[@Iscaper]

Glad it helped!

[@pauldebits]

Thanks for that second step. I had given up and was resigned to the fact that I would have to live without a garage door opener.

[@josephsmith961]

Thank you so much! I replaced the battery and assumed it was broken since it wouldn't open the door. You saved me a lot of headaches.

[@elisefalanga]

Thank you so much! I was locked out of my house tonight and had to find a way to get in due to this battery. Now I know how to fix it! Lesson learned...carry your keys to the front door with you.

[@tanfel4]

Just seeing this video today. So very helpful. Thank you for clear video instructions with no music. Your voice quality was great.

[@Iscaper]

Thanks, I appreciate the feedback.

[@plipsig]

THANK YOU! I was losing my mind wondering why the brand new battery wasn't working.

[@anointedtheoryofgospel6012]

Yep I had a brand new battery also. The other videos did not show the second step about the button in the garage

[@dillonlobban1922]

Great Video! No irrelevant chatting. He got straight to the problem and teh solution was very clear.. Thanks a million.

[@Iscaper]

Thanks Dillon for watching.

[@anointedtheoryofgospel6012]

Thank you. I did all step by step. It worked. Hallelujah for KZbin University

[@Iscaper]

Glad it helped!

[@loripatton1223]

Thank you, didn't realize I needed to reprogram the remote after I changed the battery. Problem solved.

[@Steve_K2]

iScaper, I sure do like how you produce your videos. Good audio, great video. Thanks for sharing them with us.

[@Iscaper]

+Steve Kohn Thanks Steve, you just made my day!

[@billgruner44]

great video, shows how to replace battery AND re-program the remote

[@Iscaper]

Thanks for the feedback.

[@johnberger4687]

"This was a very helpful video. Much appreciated!" Ditto that! Thanks

[@runmnwithbuddies]

This was EXACTLY what I was looking for. You would think there would be more quick how tos like this that lay it all out for you!

[@Iscaper]

+Megan Clements Thanks Megan for watching.

[@paularoberts570]

Thank you very much. Your directions were very thorough and very helpful to me.

[@Iscaper]

Thanks Paula, I'm glad the video was helpful.

[@ricardobernard9159]

Great explanation! I just had to change the battery but I didn’t have to reprogram.

[@lindsaycooper368]

This clears up a lot for me, I will go and reprogram my remote. Thanks

[@Iscaper]

Thanks for watching.

[@karenpummer2738]

Who knew? Worked like a charm! Many thanks!

[@Iscaper]

Glad it helped!

[@fredlavenuta5857]

Worked for me. Just make sure the circuit board is positioned EXACTLY right.

[@SherriMST]

Thanks so much for this very informative and helpful video! Fortunately, I didn't need to reprogram my remote. All it needed was a new battery.

[@jenilovesoldschool]

Thank you so much! That was easy. Before seeing your video, I pried open the remote and the internals flew out (several weeks back). For the life of me, i kept assembling with the battery side up🤦🏾‍♀️. I kept wondering why it wouldn't reassemble. It did not occur to me, not even for a second to flip the circuit board with the flat side facing up🤦🏾‍♀️. Because it wouldn't work, I thought I fried the circuit board because of EMC, and I was just about to order a universal replacement🤦🏾‍♀️. Luckily, a mind told me to KZbin before making the purchase. So, thank you. 😁😂

[@Iscaper]

Great, I'm glad the video helped.

[@egosgt]

This was a very helpful video. Much appreciated!

[@mamatharatnam3719]

thank you for such a helpful video!!! appreciate it so much!!! it is clear, concise and the presentation is excellent!!!

[@tomwolfel6502]

Very helpful clear short and right to the point. Thank you

[@williamiwaniuk5561]

Thank you for the video. With it, I was able to change the battery with confidence and ease. I will say that I did not have to reprogram the remote, perhaps because the battery was not yet dead, but weak. Just a thought.

[@blackridgeview]

Thanks for this simple but informative video.

[@paulfranz8682]

Good and easy to replace the battery watching this video.

[@Iscaper]

Thanks!

[@detrabell635]

Thank you so much for your video. I couldn't figure out what I was doing wrong.

[@susiehoppert1002]

thank you my genie was slightly different but you saved me thank you so much we thought our remote has gone bad and we've been just using one remote so they had to change that battery too LOL

[@thelittlestpotts]

So helpful, bless you for making this video!!

[@Iscaper]

Glad it was helpful!

[@dcasey2574]

Most helpful . . . . I had not considered the re-programming factor. .

[@dnappetite]

Very straightforward. THank you

[@krismills4393]

Thank you!!!! It worked after I followed your directions!!

[@ForeverYoungKickboxer]

thanks man this is exactly what I was looking for

[@jerihough117]

Thank you! I had it upside down! You made it easy.

[@BonitaHolden]

Thanks very clear instructions

[@Iscaper]

Glad it was helpful!

[@ckk9808]

Very helpful video. I hope my same issue is battery - related...Thanks.

[@mramos6532]

Thanks, it worked beautifully.

[@Iscaper]

Glad it helped.

[@tekss9tobias389]

It’s very helpful. Thank you!

[@cbhorr5671]

Where do I slide switch on side to?

[@CMB7]

Very helpful! Thanks!!

[@hemalihemali664]

👌👌 Much helpful!!

[@Iscaper]

Glad it helped!

[@bertramgoldson1326]

Thanks for your help!

[@chosen2c98]

Thank you 👍🏾

[@Iscaper]

Thanks for watching.

[@mikericigliano9181]

Great video, very helpful. thank you

[@arlenegraves3043]

Great help!

[@kevins7311]

Thank you very much.

[@Iscaper]

Thanks Kevin for watching.

[@laramaui4114]

Thank you. I will try it today

[@palerider2451]

What’s with the gloves?

[@cbhorr5671]

Mine has a switch on side below slit to pry open. Won't open to ck battery

[@iwaspaidtoflywithyoubatman]

Thank you!!!

[@Iscaper]

Thanks for watching.

[@patricianelson7928]

Great video! But I've changed my battery before, never had to reprogram it again. I have been robbed from a neighbor! Could this be the reason I have to reprogram? Somehow gas ended up in my oil for my mower!! Can someone break in my garage? Help

[@Iscaper]

OMG, do you have a neighbor from hell! Most newer garage remotes use a rolling code that changes each time the remote is used. Are you able to put a security camera in the garage to see what's going on? Nest cameras are a good option. Let me know what you find out.

[@patricianelson7928]

@@Iscaper yes scraper I just bought the wyze cameras. Have to return because my phone and camera got extremely hot. Thanks

[@patricianelson7928]

@@Iscaper I will buy the nest. I will keep you updated.

[@Iscaper]

@@patricianelson7928 Yes, keep me posted.

[@AnthonyBurrito1313]

THANKS MAN!!

[@oscarornelasvelasco4512]

Gracias

[@Iscaper]

Thanks for watching.

[@Mike1614YT]

2 things about this dumb remote: 1) the circuit board fits both ways, so keep the 6 gold contact dots opposite of the handle end as shown, and 2) the battery plus(+) side isn't marked on the battery cage, so draw a (+) there with a sharpie to remind yourself.

[@Kraftykae]

Thank you sooooooo much!!!!

[@peterpowers4851]

Sweet gloves.

[@norakwok3672]

Thank you sooooooooo much.

[@joyceaverybrown5915]

No CC

[@patrickmchargue7122]

Thanks!

[@manjusyogadance9570]

I replaced the battery red light came on circuit and door did not open

[@Iscaper]

Did the learn code button flash? If yes did you push the button on the remote and did the learn code button stop flashing after doing this? If yes did the learn code light turn off after pressing the remote button again? If yes push the button one more time and the door should work.

[@cathydeardoff1267]

More than likely do need to reprogram just make sure that your (BATTERY IS NOT UPSIDE DOWN

[@1bonnierussell]

Shouldn’t the Robot voice match the gender on the demo?

[@jeannecoughlin6953]

This is not what my Overthe head door opener looks like.

[@tymessenger6528]

Flat battery

[@philiparnieri]

Didn’t work

[@nathanielaranda8407]

come to know Jesus today :)

[@franpowell5851]

Thank you very much. It worked.

[@davidcooper4385]

Why...Dinasors first there is proof there ¿¿¿¿¿¿