How to program your Genie garage door opener remote control
Пікірлер: 417
@MrBrown-jj9bf2 жыл бұрын
Very informative. Captain safety would be proud of the man who put on his eye protection to read the instruction manual
@theexisting11972 жыл бұрын
😆
@victoriashiffler-roche93172 жыл бұрын
I'm dying 🤣
@quy24 Жыл бұрын
😂😂😂
@jvp7800 Жыл бұрын
Bahahahaha!!!
@texastea5686 Жыл бұрын
I love this!!! 😁
@TheBrooklynfoo Жыл бұрын
couldve been a 20 second video
@eugenetackleberry4062 ай бұрын
15 seconds tops.
@martinezkidz7 ай бұрын
10 years later this video still helps !
@robertogonzales19564 жыл бұрын
My dad's opener is an older model. Only one program button, use program button#1 on the remote and follow the instructions. Work just fine. Thank you.
@TropicalPassionFruit6 жыл бұрын
Thank you Genie for the instructions. Got it right the first time.
@laurenshaw54418 жыл бұрын
Thank you for taking the time and trouble to post that video. Worked like a charm, even on my very old, one button remote. I'm back in business and it saved me the time and hassle of an expensive service call.
@sc-xd4tm5 жыл бұрын
but it's your keypad still working
@c57ride12 жыл бұрын
This was the only video that helped me out after I tried about 10-15 other videos and my owners manuals for the car and opener. Thank you!!!!!
@randygyulay5114 Жыл бұрын
Thank you Genie. The installer never left a book but this video fixed my remote in short order.
@ericgauthier88512 жыл бұрын
Thanks for the instructions I haven’t been able to use my remote for over 1-1/2 years, changed the battery but still wouldn’t work, then i found this video and now my remote is working again!!
@sandrabrown64073 жыл бұрын
Thanks for the helpful information. After following the steps you provided, my remote is now back in service🤗
@lgiraldo81 Жыл бұрын
Thanks a lot! My garage door opener fell from my car when I got out one day and it stopped working. I figured I had to reprogram it and didn’t know how to do that. This video was very useful and show me how to do it. Thanks!
@Schneikeys7 жыл бұрын
Thank you for making this video I didn't realize it was that simple.
@GenieCompany7 жыл бұрын
You're welcome! We try to make is as easy as possible :)
@vwaudiwelder3 жыл бұрын
@@GenieCompany Why can the remote not be held too close to the head unit when programming? What will happen? How far away must it be during this process? Thank you
@Superhappyyoshis9 жыл бұрын
Start this video at 1:30, it will save you a lot of time.
@Stevenowski6 жыл бұрын
Superhappyyoshis, 1:30 is not exactly "a lot of time." It is time saved though. If millions of people watched it, it would be a lot of time.
@gregsewell42594 жыл бұрын
Excellent, thank you!. I hate listening to all the BS on videos before the actual instruction starts.
@suttontj1154 жыл бұрын
1. Press square button on opener 2. long flashing purple led 3. Press button on remote 4. Light turns solid 5. Press button on remote again 6. Lights flash blue 7. Press and release button on remote - door should open
@TheAlioop163 жыл бұрын
1:30 is a lot of time saved. Thank you!
@da-oista Жыл бұрын
Video starts at 1 minute..
@abenwinUT7 жыл бұрын
Great video. Saved me $35. My remote stopped working and I replaced the battery and it still wouldn't work. I then reprogrammed it by this video and it now works. Thanks for making this informative video.
@markpetty6108 Жыл бұрын
Oops and I just bought a new one because new batteries didn’t work in mine .
@hongyuangao83344 ай бұрын
Thank you! Fixed mine too
@leonoraolvinaoowoowoowowo2663Ай бұрын
😊😊😊😊
@Demiurge663 жыл бұрын
Thank you we had a remote out of sync and this guide was straight to the point easy to follow along.
@GenieCompany3 жыл бұрын
You're welcome, let us know if we can assist you further.
@enriquecontreras74142 жыл бұрын
@@GenieCompany troubleshooting for 7035 garage opener control
@jaybartgis51482 жыл бұрын
@@GenieCompany why can't you guys simply just make everything universal so all key openers work
@mikeg6666 Жыл бұрын
@@GenieCompany I can't get the remotes to open the door , they only close it and I followed the instructions to a T in this video. Any advice would be helpful , maybe I'm missing something. But the wall control works fine , but you have to hold it until the door opens all the way and the same thing when closing it. Not sure if that's correct either?
@GenieCompany Жыл бұрын
@@mikeg6666 Make sure your vacation lock on your wall console is turned off
@ggian Жыл бұрын
could NOT have been any easier! THANK YOU!!!
@theguillotinemafia5 жыл бұрын
Worked perfectly first time. Thanks so much
@abanabImana2 жыл бұрын
Thank you for making this easy and simple.
@burnerloco4138 Жыл бұрын
Perfect worked like a charm. I couldn’t find my operator manual Thanks for the video 👍
@tamawm18 жыл бұрын
Thanks for the video, my garage door opener is working again
@Sum1Special3 жыл бұрын
I just reprogrammed by garage remotes by watching this video... Great job 👍🏽
@massage1010 Жыл бұрын
Such a clear quick helpful video answer the questions with no BS thank you so much
@dannyd86253 жыл бұрын
Beauteous!!! Worked in about 10 seconds. Thank you.
@VenTimofey Жыл бұрын
Worked perfect for me on 2022 remote and 2022 garage opener
@Rlduncan13 жыл бұрын
Thank you very much!!!❤️❤️🚙🚙. It worked!!👍🏽👍🏽👍🏽👍🏽. I just recently moved into my new house with a Genie garage door without a Genie Remote!🤣🤣. Had to order the remote from Amazon 🤣🤣
@brynnwebster99032 жыл бұрын
Easy and right to point. Works right away
@latoyabryant6286 жыл бұрын
Thanks so much! Worked on the first try.
@TheAranzamendiPodcast2 жыл бұрын
Super easy! Thank you! It worked like a charm.
@gloriac7044 Жыл бұрын
Fantastic video! Super easy! Thank you Genie!
@aanda32842 жыл бұрын
Bother remotes are working perfect now. Thanks!
@freddy333ful3 жыл бұрын
Compared to actually reading the instructions, it worked the 1st time. That was easy!
@jameswhinery44563 жыл бұрын
Thanks worked perfectly Just moved into home 1 remote not working. Now works
@Stevenowski6 жыл бұрын
Excellent video! Thank you!
@XRLostCause5 жыл бұрын
Concise. Thank you. Worked perfect.
@GenieCompany5 жыл бұрын
awesome! Glad to hear its working
@StupidFastRC9 жыл бұрын
I really loved your clip. Great stuff! Thanks for posting.
@rogerbraasch52246 жыл бұрын
Thank you, I have almost solved it. Now viewing your video. I did not get a manual this large, other one hard for my older eyes to read.
@rogerbraasch52246 жыл бұрын
My buttons are different than this video. I have the buttons on the very back of the Box and pointed away from my door. There is a chain going to and from the door.
@vicentemedina29524 жыл бұрын
I try today perfectly open! Once trial in sec’ Your amazing bro’ tthank you!
@user-mn5ev6om2x Жыл бұрын
Thank you! Your instructions were perfect.
@erinpriest9491 Жыл бұрын
It took me longer to typpe this comment than it did to reprogram my remote thanks to this video. Thumbs up!
@jeffu32482 жыл бұрын
Life Saver. Worked flawlessly
@adrianacj33183 ай бұрын
Thanks, here to confirm this is still helpful. My remote wasn't working as well so I changed the battery, then it stopped working at all! I could tell from my tinkering that it was still communicating with the opener but it wasn't making it actually open from the remote. Woke up early to try to figure this out and tried this again more patiently and voila! Fixed! Might still have the old battery in it now though, but maybe it needed to be reprogrammed anyway. Thanks!
@GenieCompany3 ай бұрын
HI - the remote likely needs to be reprogrammed to the garage door opener. Please follow the programming steps in this video to get it working again.
@jtuck70063 жыл бұрын
PERFECT INSTRUCTIONS!! Thanks
@lisabonner59448 ай бұрын
Thank you! So easy. Great instructions!
@Hilda17kiffy10 жыл бұрын
I took my laptop with me to the garage and followed each step as the video played. I think I had reprogrammed my remote in about 30 seconds.
@prescriptionoatmeal79704 жыл бұрын
I thought you were gonna say you left you laptop in the way of the door and it was crushed
@ArcticFlies562 жыл бұрын
What’s if you have two remotes for each door? Once you reset the opener, do you just press any button on the other three remotes one after the other?
@peggyfodness89474 жыл бұрын
I was able to do this after following your instructions. Thank you!
@noopcire2 жыл бұрын
Very useful video thanks! I was able to program it on my first try.
@vaneolimpio662710 ай бұрын
Worked perfectly! Thank you!
@Razaiel Жыл бұрын
Thanks for the video, saved me a lot of trouble.
@alamgirhussain70963 жыл бұрын
Was very help full, thanks.
@ericenberg22893 жыл бұрын
Thanks so much. Easily done!
@anthonyesposito43445 жыл бұрын
Worked perfectly!
@vee95428 ай бұрын
Best video ever! Worked like a charm
@DerisedEgami7 жыл бұрын
ATTN: Be sure to set the travel limits before programming your remote. The opener will not allow your remote to work until this is done. We lost power, a week ago, and it de-synced with my remote. I tried to program the remote, at least 20 times (it was actually successful, each time) before realizing that I had to also go back and reset the travel limits. Cheers!
@ShortyandCallie6 жыл бұрын
Travel limits? That's a new one on me. Where do I reset travel limits? Thanks
@mikecross20652 жыл бұрын
Thanks for mentioning the travel limits. I had to reset mine too in order to program my new remotes.
@robnation2475 Жыл бұрын
ah...
@MikeAcousticMusic8 ай бұрын
Very helpful thank you 😅
@lilianb-ve5du8 ай бұрын
My remote stopped working. I changed the battery and still doesn’t work. No I am trying to reprogram the control but when I push the square bottom I don’t see any light turning on. I don’t know what else to do?
@eryan20063 жыл бұрын
Great video. It worked perfectly
@denisem54373 жыл бұрын
It worked. Thank you so much for this video. Awesome
@doyallogan72364 жыл бұрын
You always find haters. This guy only provided a very clear and understandable instruction video that helped me. Thank you for posting this.
@spearstrike2114 жыл бұрын
Doyal Logan Okay, *but did you wear safety goggles?*
@GenieCompany4 жыл бұрын
Thank you! Glad it helped you
@01regisk Жыл бұрын
Just saved me some $$$$ thanks I was ready to call in the pros
@themaniacmower5 жыл бұрын
is this the same with programming your vhicals transmitter to the opener
@Magnusknopftonn2 жыл бұрын
Easy to follow. Thanks!
@nadiamekhail15 жыл бұрын
that's very useful video , thank you so much
@normanmello98846 жыл бұрын
When I hold down the program button the long and round LED turn blue. I have to press the program button again to get it to flash purple. If I don't it just times out.
@dannygalvez53123 ай бұрын
Great video. You saved me!
@Tburna024 жыл бұрын
Works! Thank you 👍🏾
@mes48042 жыл бұрын
Awesome ! Worked for me thank you so much
@CateBriner Жыл бұрын
I don’t care what they say, I think you did a great job.
@patrickkools24955 ай бұрын
Super easy, thanks!
@ronniewest83811 ай бұрын
Great review!
@jandeband9 жыл бұрын
MAKE SURE YOU PUT THAT CLIP ON REMOTE BEFORE PROGRAMMING l o l
@rhondathiessen3507 жыл бұрын
Jim Lovejoy
@patriciaterranova10742 жыл бұрын
I thank you. I was able to reset the remotes.
@abbyroad24654 жыл бұрын
Very helpful. Thank You so much.
@GenieCompany4 жыл бұрын
You're welcome
@user-vq7ji2rr7f3 жыл бұрын
@@GenieCompany GENIEEEEEEEEE!!!!!!!!
@zaknafindel5 жыл бұрын
worked perfectly! many thanks!
@GenieCompany5 жыл бұрын
You're welcome!
@alejandrosolorzano72283 жыл бұрын
@@GenieCompany im trying to Programm my a NEW remove control but i cant n im following your steps
@GenieCompany3 жыл бұрын
@@alejandrosolorzano7228 Please call us and we can walk you through it over the phone 1-800-354-3643
@evismarie5 жыл бұрын
Thank you very so much for this video I really appreciate , I just did it!! Everything was good thanks to you 😉
@joemottershead41373 жыл бұрын
What if you don’t have a genie garage opener? I have a craftsman garage opener but a genie remote can this work with it?
@davidahmad202611 ай бұрын
Thank you! Very helpful!
@kremeoner13322 жыл бұрын
I have a newer genie. just installed yesterday. same remote and concept. we didn't realize that the remotes were already pre programmed. and when trying to program them to the opener we accidentally removed the remote memory from the garage opener. I was able to program one remote and also program the outdoor wireless keypad. But it won't let me program the second remote it came with. I press the setup Botton for 2 second till the blue light turns on. I release it then the long purple light begins to flash. I follow the steps and it then turns to red after about 30 seconds and the remote doesn't pair with the opener. What could be wrong if the other remote and keypad is paired and opens and closes the garage door without issue. Its very frustrating since this was the primary reason that I had a new opener installed. My last opener was old and wasn't able to read and program the remotes.
@rgidahoАй бұрын
Thank you!!! great job...
@MrShahussa Жыл бұрын
Thanks for the video
@Alfonsoo19547 жыл бұрын
Gracias!
@pnutbutrncrackers2 жыл бұрын
Thank you. This helped me.
@got2bgreat14 жыл бұрын
Thank you!
@hotnpoppin8102 ай бұрын
Thanks I just reset my remote control I feel accomplished this morning
@daksmom19995 жыл бұрын
Hopefully it’s going to be this easy for me to program my remote. My garage door opener was put on in 1992, and the remote that came with it just died, and the replacement remote is exactly like the one in the video. The instructions that came with the remote make the programming sound so difficult because Intellicode 1 and intellicode 2 are referred to in the instructions, but the manual for the door opener doesn’t specify which program the opener has. And, it refers to the light being red, and not purple. Keeping my fingers crossed that I have it this easy.
@GenieCompany5 жыл бұрын
If you have a unit made before 1995 you most likely have 9 or 12 dipswitches and do not have intellicode, you can call us for help programming that at 1-800-354-3643.
@VIP-6034 жыл бұрын
I bed to reprogram my remotes because I had one stolen out of my car... is the one that was stolen now deactivated.?
@charlesrudolph97363 жыл бұрын
I bought this remote for my genie screw driver opener. The opener is from the years 1995-2011 and I can’t seem to get it programmed. Need assistance
@HarmlessComment2 жыл бұрын
Does this work on chamberlain remotes connecting to genie opener?
@franciscotarelo3432 Жыл бұрын
Great video , thanks.
@jjmanzano99 жыл бұрын
Why won't my remote stay programmed? It will open the garage door once immediately after setting the remote, but won't work after the first time
@davidneal38895 жыл бұрын
GREAT VIDEO EASY AS 1,2,3
@scottandrews48223 жыл бұрын
Great video
@ratyrat57 жыл бұрын
The led is consistently staying red. What happened and how to fix?
@pebraes6 ай бұрын
great help. thanks
@Lily-dn4zx3 жыл бұрын
All I have to say is I thank God for you sir!
@teamgriffingaming38116 жыл бұрын
I'm a kid that likes garage doors and I have my own remote to but some times I leave my remote resting sometimes
@miamited6911 ай бұрын
I have two garage doors and wanted one per button. I accidentally programmed one button to open both doors. What do I need to do so it only opens one door per button?
@ferminrosa96208 ай бұрын
Thanks very useful 🙏
@JoeGorse9 жыл бұрын
Start at 1:15
@519stream33 жыл бұрын
I lost one remote and bought a replacement. I want program the replacement but also want the one I lost to be deactivated. How do I make sure the one I lost stops working
@katylowe35042 жыл бұрын
Excellent tutorial. Don’t think I need to look at another. (Unless after I try to program it doesn’t work.)