Budget friendly LVLP automotive paint gun for small compressors.

[@jeff6969]

Much appreciation for you walking through the variables of temp, humidity, and how to alter your approach and settings for the conditions. A lot of body shop instructors don't even cover that in much depth. Like everyone is working in perfect paint booth atmospheres.

[@GarageNoise]

Glad it was helpful!

[@BigBlueMotors]

Wow, that gun doesn't produce much overspray and painting area free from paint fog. Great price and like the PPS cups and adapters that come with the gun.

[@GarageNoise]

It's a good bargain for sure.

[@antonioprado8068]

​@GarageNoise can I still use lvlp on HS glasurit clear with activator @ 30 psi 1.3mm tip

[@gavinkunkle9957]

Very informative, great video.

[@GarageNoise]

👊

[@messylaura]

since we started using waterbourne paint i been using glass cleaner as a prep before spraying and thats for both water and solvent paints if you doubt glass cleaner like mr muscle etc try cleaning a bathroom mirror with panel wipe!

[@carolthompson-xl4ez]

Wow ,ok so glass cleaner be the way to go you reckon? ....and is that before you put down your base coat ? .....I might give a go , thanks for the tip buddy much appreciated 👍🏾

[@PhillipHall01]

Excellent video! Does this gun work well with metal flake based paint? If so; Do you have a video showing how to spray metal flake silver or gold with this gun? . Thanks again! Phillip Hall

[@suspensefulness]

i was told by a painter to turn my 21 gallon compressor air down from the 120psi way down to about 60 psi then set my gun regulater as needed...is this true or false🤷🏾‍♂️ love this channel

[@GarageNoise]

True, my wall regulator is set a 90 but it's a 60 gallon.

[@BearBudgetgarage]

Good start up package for someone with whats included. Pps adaptor, few liners, ect. They should do a set with primer nozzle/needle)cap. I'm still running with the turbine

[@GarageNoise]

From what they tell me I think they will add needle sets to it. Manufacturer hasn't made needle set for it yet but I believe the r500 needle sets will work. I'll be testing that soon.

[@alibajilan8857]

Thank you for everything I am running from you

[@GarageNoise]

👍

[@antonioromano9963]

@@GarageNoise where r u located??

[@alibajilan8857]

I learn from you ​@@GarageNoise

[@bassdaze]

ive sprayed a whole jeep cherokee with a 6 gal compressor and an hvlp... yeah there was orange peel and massive color sanding, but i say a 20gal compresskr with 4cfm and this gun is way more than enough. if they made an LVLP back then im sure id be fine with much less color sanding

[@GarageNoise]

It would've helped me out a lot when all I had was a small compressor as well.

[@GregoryGreenSr.-vs4ot]

How big is the fan patterns!

[@thediycarmedic4822]

What gun setting would you recommend for a single stage?

[@GarageNoise]

Similar to spraying clear 25 psi 3turns out from closed on fluid

[@chrispete9355]

Love the videos. I have an a610with the harbor freight cup system (spectrum I believe), when I sprayed base with 1.3 tip it seems to surge. Sprays good for a bit then light for a split second and then continued to spray good. What could cause this, should I be using larger than 1.3 tip maybe? Any thoughts?

[@GarageNoise]

Do you have enough air pressure from you compressor?

[@chrispete9355]

It’s a 30 gallon husky. I’m not very experienced with setting up the spray gun. Not the ideal compressor but, I am wondering if it makes a difference if you use a regular cup with the small vent on the cap, versus the pps system that doesn’t have the vented cap?

[@GarageNoise]

@@chrispete9355 the cup shouldn't make a difference. The 1.3 tip is fine. I would clean the cap, any dries paint in the air cap will effect a gun like this. Hold it up to the light make sure its really clean.

[@snapfly7]

I have the aeropro r500 (black version of this one) and have only used it a few times and it is now leaking paint from the trigger area, any idea what could cause this?

[@GarageNoise]

Check the nut the needle slides thru in front of the trigger

[@jaychannel11]

Lol they printed this video url in the instruction manual. I picked one up after finding your vid beforehand

[@GarageNoise]

That's intresting, This company paid me to do a promotional video for this gun. I didn't know they put it in the manual but that's ok. It a good gun that I approve of.

[@fluorescentmug8333]

What psi do you recommend for primer (dtm urethane) also bigger needle and tip too correct 1.7 or 2.0mm? For this gun of course.

[@troyadams1076]

Great video Chris man u are helping us 👍🏻

[@GarageNoise]

👍

[@lad63bird]

CHRIS, I love the video! i own this gun and love it. Did you use the same tip for color base and the clear? Also , i am repainting my 1980 corvette with single stage urethane, should i use the same tip as you did with this jobs clearcoat...Many Thanks

[@juancandelas7050]

Hola tengo un compresor de 24 litros y quiero comprar una pistola para pintar una puerta de coche que me aconsejas entre la r500 o la a610 y que consume las dos en cfm gracias

[@GarageNoise]

What matters is the cfm production or l/m you want at minimum 6 cfm of air out of your compressor. Yes this gun has the lowest air consumption of any full size gun that I've found.

[@silvercommander]

D1 a nicer gun? Given they're the same. Which would buy?

[@GarageNoise]

Which ever ones cheaper. I perfer the color of the D1 but that's just a personal preference.

[@Bigdoink95]

Hi I’ve got a 20 gal tank with 4.0 cfm @90 psi, think I’ll be able to do my single cab Chevy paint job with it????

[@robertdeleon588]

Great job Chris the overspry is very low hey what do you think about the aeropro A608

[@GarageNoise]

I've looked at that gun, and at one point I was going to review it. Still may at some point.

[@kkp4297]

if i just want to paint panel by panel, will a 6 gallon compressor be sufficient?

[@GarageNoise]

You need 4-6 cfm more like a 30 gallon compressor

[@tanker242]

What percent of isopropyl alcohol do you use in your sprayer?

[@GarageNoise]

70%

[@JohnWD40TC02]

Great video Chris, the YT-160 did a great job on the base and clear plus you could notice there was less overspray than your other guns which is a bonus for the DIY painter what I did notice is that it seemed slower laying the clear but that's probably due to it being a LVLP gun, I'll be adding this one to my list, finally got my Astro EURO-HE at the weekend and that is a cracking gun which sprays like my DV1 but it's less than half the price. I did notice some flickering in the video Chris, this is probably your camera is being effected by your lights so if you can try changing your frame rate or shutter speed on your camera, it's only just started doing it so something might have changed in your camera, hope that helps🤔👌👍John

[@Classicmode1956]

Could you please provide the link to buy that gun

[@GarageNoise]

amzn.to/43xpc6d

[@joaquin0023]

I asked the seller for the air consumption and they said 300L/min which is over 10 cfm. I don’t know if that’s accurate since the description says 3 to 3.9 cfm

[@GarageNoise]

I think it's somewhere in between. I know my sagola is 10.5 and this gun uses way less.

[@joaquin0023]

@@GarageNoise ok, thanks. I just need it to paint my bumpers and other parts but I’ll be doing them separately.

[@impalaman4546]

Nice job

[@GarageNoise]

👍

[@Kamikazecobra92]

Would love to hear about your recommendations for accessories to these paint guns. Which filter/ psi gauge you’ve found is the best

[@GarageNoise]

regulator and air filter for painting

[@jonyovanno4145]

What do you mean by cooler? What temperature are you at???

[@nativexsoul]

What size air compressor are you using?

[@67cudaksa34]

6CFM at what pressure?

[@GarageNoise]

Base coat about 20psi, clearcoat I like between 28 and 30psi

[@67cudaksa34]

thank you @@GarageNoise

[@brianhayes7618]

That cheap gun does a pretty nice job

[@GarageNoise]

👍

[@RafaelLopez-fx5rc]

Yes

[@thaipinas1054]

Hi. Great job. you think that gun would work with my 550 Watts 30 litters compressor? 😅

[@GarageNoise]

🤣

[@maItre_gonzo]

That gun looks good, but any gun looks good in your hand, so hard to say 🙂 But how does it compare to a R500 ? any noticeable difference, any good reason to switch ? Anyway, could not find this gun on amazon europe, so it would not even be an option 😞

[@bingo90210]

I was wondering the same. How does it compare to the r500?

[@GarageNoise]

Literally the same gun spray the exact same.

[@onurpinarbasi]

Hello teacher, how much thinner do you put in 2k paint? 200 paint, 100 hardener, 100 thinner?

[@davidhempsall2542]

I mix 2parts paint 1 part hardener and 10per thinner

[@GarageNoise]

No hardner in the base coat I use, just paint and reducer 2:1

[@onurpinarbasi]

@@davidhempsall2542 You meant to say "I put 10% thinner"

[@jxhern22]

I have a 2000 civic w factory single stage silver, body is straight, can I sand and paint over with reg solvent based base coat clear coat? Or do I have to prime entire car, if so w what?

[@GarageNoise]

If the paint is in good condition and not peeling you should be able to sand with 600 and base/ clear without primer. You may want to seal it before applying base for a good ground coat.

[@angelcesar7122]

Whats the point on purchasing a spray like that if you still need a big compresor ?

[@angelcesar7122]

Whats the point on purchasing a spray gun like that if you still need a big compresor ?

[@hueinismo1]

which size small compressor sir?

[@mickiematthews1881]

Chris, what in y out opinion are the pros and cons of a single stage paint system vs, a 2 stage system? Thanks for any guidance you might share. Randy

[@GarageNoise]

Single stage is like spraying clear, it runs easily if you not careful, wet sanding and buffing can effect color if it's metallic, so it's not as forgiving. It may be a bit cheaper and it's one less step but it's also not as durable. I would use bc/cc it's all around better. Hope this helps! Appreciate the comment and support!

[@DIYSolarEnergy]

Oh the camera frame rate is in sync with your lights..

[@GarageNoise]

Yeah, I've corrected it now.

[@jeremythornton9838]

Set clear can in warm water

[@bensturma6631]

Have you tried switching the air cap from r500 to aeropro or this gun? Other you-tuber says it gives you a wider spray pattern and better atomization. Thanks for video!

[@GarageNoise]

I have swtched the air cap it was a bit different I honestly can't say it was a lager spray pattern. Maybe I'll check that out.

[@cynt1111]

My 5.7 cfm fad compressor at 30 psi won’t keep up with this gun

[@Helmuesi911]

What’s fad? How big is your compressor?

[@cynt1111]

Free air delivery, what you actually get at the gun. My little compressor is a Hyundai 50 ltr silent.

[@joaquin0023]

@@cynt1111are you spraying large panels or doing small sections?

[@cynt1111]

@@joaquin0023 In general just a couple of panels occasionally the side of a car. Would estimate this gun at 8-9 cfm.

[@joaquin0023]

@@cynt1111I asked the seller to confirm the air consumption and they said 300L/min which is over 10 cfm. I only need it to paint a bumper but I have a small compressor which only does like 3.7 cfm at 40 psi. The description says 3 cfm and 30 psi but I doubt it.

[@clinttorres2508]

Looks like u didnt spray sealer over primer etc. Do u typically paint right over primer and thats good to go, maybe an extra coat of base takes care of any transparency

[@GarageNoise]

Being in a open garage I try not to use sealer with the exception of bumper and break thrus into filler. If the primer is uniform and sanded correctly you don't always need sealer.

[@clinttorres2508]

@GarageNoise ok thanks, thanks for the reply..im going to be painting my black 2001 mustang hopefully soon, I've fixed couple small dents here n there..since I'm re painting it black I thought maybe black primer would help over the body filled spots to not show thru..ill be painting outside unfortunately, my garage is filled up with motorcycles n carpentry tools LOL

[@VeekAtanees8830]

Great vid. Its getting cold here about 50f. Would you warm the lacquer? If so to what temp. Thanks

[@reggaeriderr]

R500 and A610. Same gun. No one talks about the leaking problems these have. Also the spray pattern on A610 is not as gr8 as the r500.just saying

[@GarageNoise]

I don't know some people have had some machining issues a few have mentioned a leak. I have 4 of these gun and haven't experienced either one. I would say there could be some issues it is a inexpensive gun. I think there is a slight difference in the R500 and the a610 .

[@BoykieGovender]

hey chris ur a chancer, u need to take some tips from pzint society before u make the next vhdeo.

[@CybekCusal]

CFM = cubic FEET per minute. It's already plural. Would you say Feets? No. So don't say CFMs.

[@GarageNoise]

👍

[@mohammedsabeel50]

​@GarageNoise can i get this gun in the uk

[@phaedrussmith1949]

No, but I also wouldn't capitalize the word "feets" in the sentence "Would you say feets?" so I guess we all make a little error here and there.

[@clinttorres2508]

Id be surprised if the harbor freight 20 gallon compressor is pushing 6cfm..some of their compressors have larger tanks but with weak motors

[@GarageNoise]

Your right most are around 4-5 picked one up this weekend to make some content with the one I got is 4.5 I sprayed son furniture with it and a lvlp and it did surprisingly well. Content on that coming soon.

[@clinttorres2508]

@GarageNoise kool..I used a harbor freight 20 gallon compressor that wasnt mine to paint some cabinet doors a few yrs ago with the sprayit 33000, compressor kept up no problem tho it ran constantly