The BEST gun for painting a car in your garage!

This is the BEST gun for painting a car in your garage . In this episode, it's all about spending less and getting great results. I'm excited to share a unique budget paint gun for pros or hobbyists. The reason I'm excited cause this gun solves common problems for the diy painter! If you have limited air supply or need low overspray, this is the best paint gun available. I hope you find this video helpful on how to paint a car bumper with a diy paint gun and budget clear and sealer. This is the best low cfm budget lvlp paint gun on the market!
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com...
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
upol clearcoat
amzn.to/3XhGtgj
aeropro a610/R500
www.amazon.com...
R500 lvlp paint gun for small compressors
amzn.to/3ggFQmL
upol 2k primer
amzn.to/3OzRRQZ
low cost disposable cup system 1.0
amzn.to/3PfhKWs
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
3m paint mask
amzn.to/3UP7NQP
70% isopropyl alcohol
amzn.to/3uCCy0F
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
paint gun and clear review playlist
• paint gun reviews
how to color sand and buff like glass
• Beginners guide to wet...
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com...
Business Inquiries: [e-mail]
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/...
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.

[@jadoriffic]

I just bought this gun for my first paint gun by chance. I was really glad to see how well liked it is. I can't wait to use it!

[@derekmoore1387]

I appreciate how concise you are. You and the Underground Paint King get to the point and really help the diy'ers and hobbyists.

[@thistledewoutdoors3331]

If you leave the last 3"-4" of your blend panel free of clear coat on your 1st coat of clear & then do a full wet final coat of clear - You'll dramatically cut down the optical color change from panel to panel....

[@GarageNoise]

Intresting? I've never had clear coat effect the appearance of the color. I appreciate the comment band support.

[@HowtoRestoreHeadlights]

Woo! I paused the video after 10 seconds to go buy the A610 🤙🏽 Been on the fence about which one to get and pulled the trigger on this one. Got it with 1.3, 1.7 and 1.4 tips. Now to wait til April for it to arrive. Should be more than enough time to forget I ordered it so it’s a complete surprise when it shows up :) Thank you for the CONTINUED content to help the DIY

[@GarageNoise]

Awesome, I think you'll be happy with it let me know! Last time I look it was sold out is it available now? Appreciate the comment and support!

[@HowtoRestoreHeadlights]

@@GarageNoise I clicked the link in bio and it was still sold out. I used AliExpress and they had plenty in stock. Just takes a bit longer than Amazon to ship

[@floorpizza8074]

OK, so I just looked at AliExpress two minutes ago. They have changed the product listing page yet AGAIN. Now they do have the option of purchasing the gun and all of the tip sizes, as well as mixing and matching. This has changed since I ordered my gun two weeks ago, when the product listing showed only one tip included with the kit.

[@alfk4415]

Great Vid and great results! Really smooth! This vid was a starter for me. I started with HVLP in the garage, prep was fine, base coat was ok and once I started with the clear coat I was standing "in the fog" and learned about advantages of a spray booth. Result was rough finish and orange peel. Now I do own an R500, A610 as well as an LT100 and changed my approach a kind of completely. Prep is the major part still, but the LVLP techique with reduced overspray and pressure is the reason why my complete car paint is competitive and worked out well. Thanks for the key fact with changing the speed without the settings...it is a key! Once the settings are fine, they will stay fine and from then on speed will make the difference! Cheers and thanks a lot!

[@StylesLee]

Thank U Sir for showing us the distance & the right speed for spraying to make that Optimum Gloss Touch. I love the video & teaching. I learnt a lot just by watching & hearing your clear instructions.

[@MarcBchannel]

I really like this gun. I've tried several affordable DIY guns and so far this one hard to beat. Sprays and atomizes very well. Nice wide and even fan. I have a Devilbiss FLG5 and it's a nice gun but it cost me a little over $200 and it's got an air leak in the air valve. A rebuild kit is gonna cost $60-70 shipped from the UK. It's also got a seal that wears out on the fluid nozzle. The aeropro doesn't have a seal on the nozzle and the other seals are easily replaceable rubber o rings found at the hardware store. Makes it easy and affordable to service. Great gun for the DIY painter

[@GarageNoise]

Couldn't agree more brother! I can't say it enough on the channel and it help everyone in the community to hear it from painters who use this gun. Appreciate the comment and support!

[@jaefousable]

Which one spray better?

[@MarcBchannel]

@jaefousable The Flg atomizes really well. It's a good clear gun. Lays out plenty of material nice and flat at 30-35psi. It's a good primer gun too if you have a 1.8 tip. I don't care for it too much for metallics but it will lay them out fine if you do your part. Either gun will do the job

[@ronskopitz2360]

I bought the Spray-It version about a year ago. I have used it a couple times. I got a very lumpy (like sharkskin) finish with the 1.5 tip and some epoxy primer. I think it was all technique issues, though. The gun seems to work well and is easy to clean. Low overspray. No problems with harbor freight 29 gallon compressor.

[@bosinious]

Dope gun! watched you video yesterday. Ordered on amazon same day delivery, slapped on 3M 2SC adapter to use with the PPS cups, used the 1.3 for base and clear this morning on a bumper - Glorious! Worked just like you described. Then again you step by step instructions on initial setup may have played a part to the awesome result Thank you

[@GarageNoise]

👊

[@Dotool]

Thanks for the detail and ease in your explanations. I hope you know how much better your videos are due to your positive attitude and drive to teach others. It is one thing to teach something, but it is another to be passionate about it. Thanks！

[@beauchamp1763]

They look like a copy of the Iwata Bellaria which I absolutely love in 1.3 dedicated clear gun. I'm a Devillbis fan going back years and have 3 pro lites and 2 flg 5's one in 1.4 and the other in 1.8 dedicated primer gun. Great video mate. Hello from Australia 🇦🇺

[@GarageNoise]

The orig r500 looks a lot like an Iwata makes you wonder 🤔. Appreciate the comment and support!

[@qfdforme]

This gun arrived today from Amazon. After having to use a pair of Knipex pliers to loosen the air knob, I successfully sprayed a pint of acetone through the gun at 20 psi. I like the look, feel and function of this LVLP spray gun.

[@GarageNoise]

👍

[@andrewalleyne312]

My paint gun just arrived and I'm glad I watched this video. Thanks for this video

[@GarageNoise]

Awesome! Have fun with it! I appreciate your comment and support brother!

[@andrewalleyne312]

No problem bro

[@nigelbarrow6615]

I want to thank you very much for helping me with my spraying technique and I really enjoy your teaching.. watching from barbados

[@GarageNoise]

You are welcome! It's my pleasure and I appreciate the comment and support!

[@RobThompson-fo7uj]

I have taken your advise and purchased a R500. I have been painting at a shop with a low CFM compressor. The compressor is having a tough time keeping up to my regular 10 - CFM guns. Should be here soon so I can give it a try. Thanks for your informative utube site.

[@GarageNoise]

Awesome! Let me know how it works out! Appreciate the comment and support brother!

[@RealLife73]

My r500 came with everything you mentioned but with 4 needle sets, the same ones plus a 2.0

[@GarageNoise]

Awesome!"2.0 could come in handy with epoxy

[@zpbeats3938]

I wanted to like this gun but I had nothing but trouble with it as a beginner. Everything that could go wrong did go wrong. Firstly the vent clogged after primer, didn't realize (again beginner) messed up my first base coat. Secondly I clean the entire thing very well again, tried again, and towards the front of the gun the nut with the needle seal apparently was loose and slightly leaking which also caused a slight leak in the system and inconsistent spraying. My harbor freight gun gave me zero troubles. I have a hard time recommending this unless you know exactly what you're doing and how to check everything on the gun (I thought I did but apparently there were some little things that I missed). It sprays decent when it's all working, but overall it's pretty cheap and out of the box needed significant maintenance.

[@GarageNoise]

Sometimes you have those days where everything goes wrong. I've had my share don't give up on it too quick, you sort out the bugs and you may change your mind or you might not .

[@zpbeats3938]

@@GarageNoise one of the seals got messed up too, may try out an atom gun. Got great results with my harbor freight gun. Was discouraged but not defeated as overall my project turned out fantastic given the challenges and willing to further invest in better equipment. I'm excited to paint another day! Thanks for the videos, hopefully my initial comment didn't come off too negative, was just frustrated in the moment.

[@krh007]

See my reply comment in the more recent post on this issue

[@zpbeats3938]

@@krh007 ?

[@randyms3830]

Just got the r500, im excited to use it after watching your videos.

[@GarageNoise]

Hope you enjoy it!

[@FE428Power]

Got mine yesterday. Tried it out today. It whistles using the 1.7 setup. Hopefully I'll get to try the 1.3 this week.

[@GarageNoise]

🤔

[@FE428Power]

@@GarageNoise 1.3 whistled too. 1.5 sprayed a a top heavy pattern and bottom heavy if I turned it 180°. I sent it back😔

[@gbitpal]

I just purchased the same gun 610, so I'm new subscriber, tnx.

[@GarageNoise]

I think you'll like it. I've got plenty of video's using it. Welcome to the channel!👊

[@jaydawg2357]

Im not gonna Lie, when i was 22 and didnt know Sh_t. I tried to Paint a '65 Mustang w/ a HVLP Sprayer that required 14cfm w/ a little Porter Cable pancake compressor. I killed the compressor and made very nice Orange Peel everywhere! Lol! Where was this Gun in 2000???

[@GarageNoise]

Lol, that's called getting experience the hard way🤣 Hopefully I cannhelp people avoid that. Appreciate the comment brother!

[@antonioprado8068]

​@GarageNoise I noticed through the light reflection there was orange peel everywhere. Didn't look heavy but notice the edges of the light lumpy. Is that normal cause of the brand of clear. I know you have alot of expertise so if that's normal than I'll understand if it happens to me. Cause I've seen other videos where they lay it like glass from the start

[@jaydawg2357]

@@antonioprado8068 try increasing your Air Pressure by 4 lbs.

[@antonioprado8068]

@@jaydawg2357 thing is EVERY video I've seen they shoot at 30lbs on a lvlp. I'm wondering if it's cause he shot at 3-4in away

[@bjorngilbertson5700]

Used this gun with the 1.7 tip I believe and ran my high build urethane was not a big deal but with some adjustments it lasted paint out nice just a little this most likely operator error

[@GarageNoise]

👍

[@jrc2905]

Thanks for the information. I am getting ready to paint my bike but was not sure which one of my guns to use, I am a DIY, and this gun looks like it is perfect for what I want. Just purchased it through your link. I do a lot of small paint repairs on my cars but getting paint where I live is getting hard. The oreilly auto parts out here do not sell paint because of shipping restrictions. I plan to watch all you video's, good luck.

[@GarageNoise]

Awesome! Appreciate the support of the channel and good luck with your project!

[@thistledewoutdoors3331]

I like the envelope you have on top for burning in the clear....

[@GarageNoise]

👍

[@aurktman1106]

Just ordered one of those guns. Can't wait to use it this coming weekend!

[@GarageNoise]

Awesome! I think you'll like it!

[@cecilb3216]

​@@GarageNoise can this gun be used with a 80gallon 2 stage compressor. if so what psi setting or is it strictly for small compressors. I need a dedicated clear coat gun

[@Swampyssidehustlehobbyshop]

The Aero Pro A 610 is an excellent all round gun. I can spray primer, base coat, flake and 2k clear out of the same gun. Can use my 26 gallon two stage compressor without any pressure drop. Uses half the volume of paint than a HVLP. I paint motorcycle parts so the equipment i have works very well for the applications i use it for.

[@GarageNoise]

Awesome! Appreciate the comment!

[@tomh6598]

I recently purchased aero pro R500 ! Do you think the Husky 27 gallon air compressor would work good for this Spray gun?

[@GarageNoise]

@@tomh6598 check how many cfm's it produces needs to be about 6

[@tomh6598]

@@GarageNoise it is 5.1

[@GarageNoise]

@@tomh6598 that will do it, may fluctuate if your painting a complete car.

[@lennoxfolkes4179]

Great thanks for guys like you, who inspired me to do my own paint job, keep the good work up.

[@GarageNoise]

Appreciate it brother!

[@joemckenna9644]

.26 I am repairing and painting a waverunner and have really found your videos helpful. My question is this… After applying the second layer of paint I have some dust and bugs that got caught in the paint. My understanding from a video is that you cannot sand at this point even with a very fine (3000) wet sanding. Is this accurate? If sanding at this point is not an option, what do you suggest? Great job on the videos and thanks for your help. This - for a 75 year old - has certainly been a challenging and interesting project. I’m almost done thanks to you.

[@GarageNoise]

Depends what paint your using. Is it basecoat clearcoat or a single stage? If it's base and then clearcoat. You can lightly sand out imperfections with a fine sandpaper like 800 or 2000 and then apply another coat of base and clear.

[@JohnWD40TC02]

Thanks for doing these gun reviews Chris as it helps the hobby painters out there like me, I'm lucky enough to have a decent compressor that can run most guns plus my air fed mask in my homemade booth. I would like to see the video you mentioned about how changing your gun speed and distance can alter the way it sprays, I think it would be very interesting, many thanks👌👌👍John UK

[@GarageNoise]

Your welcome! I appreciate all the support. I think I will make that video. I believe it will be helpful for the community. Its amazing by what can be done with just a few simple tweaks of spraying techniques.

[@JohnWD40TC02]

That would be awesome, as you say you can change the finish from the clear just by altering the speed or distance, looking forward to seeing it.

[@mikoajkopernik7664]

​@@GarageNoisehi i see this gun make a great work but i see its little slow , did u have full open material ? May be i need order 1.5 for faster spray panels ?🤔

[@jimfeaster4837]

I watched this video several times I bought ... Great spray gun😅

[@GarageNoise]

Right on! Appreciate the comment and support!

[@jimfeaster4837]

I luv this gun works excellat😊

[@GarageNoise]

👍

[@sebsefyu]

Can you make a video or provide more details below how did you get Nason mix and match your car exact color and how much more does this cost vs factory paint? This is most crucial part of painting the car hehe. Thank you kindly in advance.

[@GarageNoise]

Yes I can, Oreillys mixes it to the factory code on the car. I can certainly include the process of checking the colo. Appreciate the comment and support!

[@keithgrow8661]

Just used one today. Great gun!

[@GarageNoise]

👍

[@BearBudgetgarage]

This looks like a good start up kit for anyone at home with a smaller compressor. I just bought a Devilbiss Pro lite t110 for clear and with the other guns I have, i'm calling it good. But I still like seeing gun demos👍

[@GarageNoise]

The Devilbiss pro lite is an awesome gun. Since your not concerned about air I'd say your good. Although I have guns that spay a bit better and still use this R500. Appreciate the support!

[@gregbartley7179]

I’m just a bit confused about the adapter for the paint cups….for the disposable paint cups you use, could you go over the adapter again??? (Total beginner)

[@383squire]

Just ordered mine, really wish I found these videos along time ago before I started painting my 65impala

[@GarageNoise]

Awesome! I think you'll like it.

[@Roboticgladiator]

How about some tips for spraying a dark metallic? I have a project that will get some midnight blue metallic when it's ready for paint.

[@GarageNoise]

I have some videos on dark metallics. Not difficult, the light metallics can be difficult. Check out the videos on blending. Appreciate the comment and support!

[@amosclark9048]

Midnight blue is my favorite color. My current car is metallic blue midnight blue. 👍

[@HappSsack]

Hey, frst off, you're a great teacher. Watched numerous vids you've published. You have given me the confidence to move forward and pain my grand cherokee. Starting with the bumper covers. The lvlp guns are for me. The question i have is for the compressor. I have a dewalt with a 4.5 tank. It produces 5 cfm. Also it can produce 200+psi. Will this be adequate? Can't afford a new compressor at this time. Later is a definite possibility. Will it get me through the bumper covers? Also would adding an oil/water seperator and a second regulator to the compressor help? Thanks for your dedication to the diy-er.

[@AnVo-cf2gc]

Any tips to avoid orange peel? Same spray gun, fluid 3 turns from close, fan wide open, 30 psi.

[@GarageNoise]

I have several videos that will be helpful

[@gunstuff5273]

I would love see a video dedicated to clear coat techniques. I tried using your settings for Upol 2882 and ended up with horrible runs that I couldn’t get out. I now have to recoat with base and try doing clear coat again. I also had so much overspray from the gun that the whole garage was a haze at 30psi.

[@GarageNoise]

Oh no! I've got to make that video. Remember your distance and speed as well. Typically runs are from speed. I say typically cause other thing can cause it. Also what was you fluid at? I'm spraying 3 turns out from closed. Do a test and experiment with your air, fluid, speed and distance. Get a feel for how the effect each other. Appreciate the comment and support!

[@gunstuff5273]

I was doing three turns out from closed with the trigger squeezed in all the way. I am using the spray it 33000 as well. I have never painted before this project and using your tips I have been able to paint the primer and base coat without a single issue so I owe you a lot of credit. Thank you for the advice again.

[@yattonjunction]

@@GarageNoiseoo

[@GarageNoise]

@@gunstuff5273 Awesome to hear brother! Happy painting!

[@rob12449]

Enjoyed a video yesterday and here again today I just subscribed. You are very clear in explaining things and what you explain is very informative. It is cool that I have an R500 and also the very same clear! I realized you never said anything about the a610 in use, other than calling it an R500, so I guess it really is the same- which you expected. I'm also amazed that the upol clear did not run spraying so close like that. I can't wait to practice this stuff when Spring comes around.

[@davidd727]

Thank you for this video. Quick question. I’m going to be getting a smaller 20-30 gallon compressor and this gun. I plan on painting my car in the garage. I was wondering if you could show us the setup you use for moisture containing? Or maybe you already have a video and I missed it. I’m basically trying to find out what all I need for a garage setup without spending a ton. Thanks.

[@GarageNoise]

I have oil and water separator with dessicant beads that I change every time I paint.I have about 20 feet of line with two drain vales before the separator. Water trap at the gun. Here's a link to my separator. This is the one I use amzn.to/40Mdlyc

[@qfdforme]

Thanks for the review. Just ordered one.

[@GarageNoise]

👍

[@mikekendall841]

I just ordered this spray gun. what PSI do you suggest for single stage paint?

[@GarageNoise]

25-30

[@SupaCarlWayneTV]

Is the original r500 just as good because the 610 is constantly unavailable

[@GarageNoise]

It is, sprays the exact same just different appearance.

[@SupaCarlWayneTV]

@@GarageNoise thankyou

[@hdrolling]

Good review. I have the Summit R500 which is the same as the sprayit gun. Correct me if I'm wrong but reading your comments and watching the video does this sound right for a starting point, epoxy primer w/ 1.7 tip at 15-20 psi- Base w/1.3 tip at 15-20 psi and clear w/1.3 at 30 psi? Base is a metallic if that matters.

[@GarageNoise]

That sounds good! 1.7 should be large enought for epoxy if it has trouble you may need somthing large for exopy. Thickness varies depending on brand.

[@hdrolling]

@@GarageNoise Thanks, Everything worked perfect with these settings. Not a single run and very little orange peel.

[@marvondgeneral8736]

I took d 1.7 and put it in my R500 for priming

[@cgadalla9]

Love your videos, you bring back my passion for doing these jobs at home. Question in regards to a single stage paint, what psi would you recommend. I have never sprayed using a LVLP sprayer before. Thank you

[@GarageNoise]

28-30 psi spray like clear

[@WiseMan22]

would the r500 be too small for the entire clear coat vehicle job? If so, what clear coat gun would you use to cover some ground more quickly? Thank's.

[@marty3553]

Big thank you for your videos

[@GarageNoise]

My pleasure!

[@yossiarias6791]

Just to make sure - when sparaying base coat spray at 15psi and clear at 30? In what psi should I spray primer? Thanks!

[@GarageNoise]

Yes, but thesebare just guidelines if you need to make adjustments do it, experiment with what feels right for you and the conditions your spraying in. Primer is sprayed like base coat. Appreciate your comment and support!

[@yossiarias6791]

@@GarageNoise thank you very much mate. Appreciate your help!

[@chrisguzman7926]

Is this also recommended for a 20 gal 8cfm at 40 psi compressor?

[@GarageNoise]

That would work great

[@terryhall5811]

Have a question about a different topic, I had to paint lower door and used the crease line to paint up to it. What is the best way to sand it smooth.

[@GarageNoise]

Do you have a soft edge or hard line? If it's a soft edge I would sand with 2000 , don't try to sand it totally smooth. Then sand with 3000 , I would the sand with 5000 and buff using a lite compound. 5000 is optional. If it's a hard line same process but just understand you won't get it totally removed and you don't want to try cause you'll probably sand thru the clear. Hope this helps! Appreciate the comment and support!

[@mahalnidivine7270]

Sir....I just wanted to repaint my bumper... starting with 180 or 320 sand paper,clean..after that spray primer right.... hopefully you can answer sir.. thank you...🥰

[@GarageNoise]

That's correct!

[@toycoma98]

If you dont own any spray gun, this is a good starter kit, additional needle sets are great, price is good. I returned mine because the holes on the air horn were misaligned. Haven't used it but it bothers me. I already have the LT100 and Summitracing lvlp so i dont really need this gun. It is a good deal though with the additional needle sets. The seal behind the trigger is a bushing making it gritty, older R500 are oring that feels smoother. Weight are about the same, newer is slightly lighter. Aircaps are interchangable, but the needles doesn't have engraving on them to identify size. The older r500 needles are engraved with size. First stage of trigger is very short, you might accidently pull too hard and make paint come out when you try to use just air.

[@GarageNoise]

Thanks for your input brother appreciate the support!

[@iironwarrior]

Love your videos...I wanted to ask if you knew where I can order California compliant paint...I want to paint my 2000 gt mustang with the original white base clear. Would love your recommendations..also would you recommend water or solvent base...thanks

[@GarageNoise]

I think you can find that paint online. Try Eastwood, you can also find the clear coat online as well. That's Suitable in california

[@FE428Power]

If you would have sprayed the base with the A610, would you have also used 15psi?

[@GarageNoise]

Yes but, I have been bumping up my base coat psi to 20 lately. Remember these are guidelines so use the pressure that works well for you, other variables my effect how you want to set up your gun. Appreciate the comment and support!

[@billabram8512]

Thank you for your video. I recently purchased the R500 from Amazon but having a problem changing nozzles. I'm a newbie, but my understanding is when changing the nozzles you have to change the needle with it. Any suggestion on how to remove the needle on the R500 would be appreciated, I Can't find anything on how to break it down for cleaning or moving from one tip to the other either on line or from the shipped user manual. Thank you again. I think a video on a borrowing but necessary topic for cleaning or changing tips would be appreciated by many.

[@GarageNoise]

Unscrew the fluid adjustment remove spring an the you can pull out the needle towards the rear of the gun. Remove cap and the fluid tip. Probably should do a short on that. Appreciate the comment and support!

[@krh007]

If the fluid tip is on really tight from factory use a socket set to crack it loose (not the little gun spanner in the kit). When reinstalling the fluit tip you can then use the spray gun spanner to nip it up firm, then re-instal the needle and last the air-cap

[@leomartinez2367]

Love your vids!!!

[@GarageNoise]

Ty

[@ysitrim88]

Awesome thanks for another great video!

[@GarageNoise]

Thanks for watching!

[@ysitrim88]

@@GarageNoise Your welcome.

[@petermcpherson5005]

great video thanks. Very informative.

[@GarageNoise]

Thank's Peter, appreciate the comment and support!

[@kevinbelanger9354]

Hi just want to thank you for all your videos your the best by far 👌👌 Can you explain how to set up the r500 Fan setting psi etc please

[@GarageNoise]

If you check out several of my painting video's on clearcoat I explain it. My video this Wednesday will also go into a detailed explanation. I think it will be helpful. Appreciate the comment and support brother!

[@jnikadie]

I notice you have your water trap before the regulator (which is how everyone seems to do it). I would have thought it would be better to have the water trap after the regulator to catch any water that condenses as the pressure drops. Am I missing something? Thanks for the videos and for taking the time to answer so many questions from your viewers.

[@GarageNoise]

Honestly I really don't think it matters how you put it on. Appreciate your comment brother!

[@Swampyssidehustlehobbyshop]

The fitting at the gun is a standard european pipe thread which is designed to seat the regulator to the gun and the tapered pipe thread on the other end of the regulator screws into the female end of the water separator. The way he has it set up is correct you do not water going into the regulator either.

[@forrestlibby9456]

Another great video!

[@GarageNoise]

Thank's buddy!

[@alexrb4363]

I bought this gun and im really trying to like it but im getting runs every time 😂i changed my speed cut back on fluid tried about everything i could but nothing changes im wondering if the clear coat im using is the issue ive also noticed that the fan size is kinda small for me u gotta open the fluid all the way in order to get a bigger size fan i find the astro EVOT 13 sprays much easier than this gun

[@GarageNoise]

You might have a machining problem in the cap, cause the fan size should not be effected by the fluid volume. The fan should be about 10 inches.

[@joehiatt1992]

I bought the 610 last night off amazon ,did u notice any diff. between the 500& 610 ?

[@dsimms6]

What's the lowest gallon tank do you think I could get away with using this gun? Also the lowest scfm at 90psi?

[@GarageNoise]

I have video's where I use this same gun different brand with a 26-gallon compressor that produces 4.5 @90psi and it does fine.kzbin.info/www/bejne/f3qufahumbShq6Msi=QAXl5OctbadfTrvQ

[@dsimms6]

@@GarageNoise Awesome, thank you. Could you get away with even lower you think, like a 9 gallon?

[@arvizu619]

@GarageNoise Great review! Which one do you think its best ? R500, A610 or the Blue Astro Euro?

[@homer13martinez]

Where did you buy the spray gun and what store did you buy it from

[@GarageNoise]

Amazon here's the link amzn.to/3zLPhRf

[@jeantaylor6785]

I got 2 of these a610 guns what about the grease in them? Do they have to be cleaned out because of the excess grease???

[@GarageNoise]

I know some guys say break Em down. Remove some of the excess grease, Or lubricant that'sin them I never have and have never had an issue with it. When I get them out of the box. I just clean them like I normally. Would you and go ahead and spray them with them. I get them out of the box. I just clean them like I normal and go ahead and spray with them?Appreciate the comment and support

[@jeantaylor6785]

@@GarageNoise thank u and God bless u my brother

[@marcuslima2535]

how`s the overspray comparing with an hvlp? noticiable? that`s the BIGGEST point for me swapping to a lvlp

[@dixie265]

Found this gun to be great but I do have problems getting a good gloss with Acrylic clear, also seem to get a fair bit of over spray ,is there different settings for Acrylic? maybe a bigger tip? any tips would be welcome.

[@GarageNoise]

Are you using a 1.3?

[@GarageNoise]

When you say gloss ,is it orange peel?

[@dixie265]

yes 1.3 @28 psi, I sort of got a shine from the clear now, had to slow down the gun speed bordering on the edge of runs, Acrylic just does not shine like 2k by the looks, so a lot of rubbing and polishing coming up thanks for reply@@GarageNoise

[@ys_motocare2120]

Its really have small air consumption about 3-4cfm for real use? Like mini spray gun? If thats true, can i work with 1 or 1,5 hp compressor??? Interested

[@GarageNoise]

So it claims 4-5 cfm's I have no way of knowing for sure but I compare it to my other guns that use 10cfms and the overspray that's produced and materials used is noticeably less. So I know it's lower air consumption. I haven't used it on a small compressor but have seen it used on a 20 gallon harbor freight compressor that produces 6cfms and it painted a whole car with no trouble. Check out youtube.com/@UndergroundPaintKing?si=P7rZ6HDQL6fw8SRB He hase used it with a 20 gallon compressor. A pancake compressor will likely be to small.

[@ys_motocare2120]

@@GarageNoise hard to find lvlp gun with low air consumption like this,, and a will try this gun soon... Thanks for sharing 🤟

[@Outlaw_kris]

Has anything new came out that better for small compressors I’m looking for any info I’m ready to buy a gun now I’m going to be spraying base clear on a full truck

[@GarageNoise]

Nothing other than rebranded stuff the Drizzle D1 is a good gun.

[@iironwarrior]

Hi, I just wanted to ask a question..I just picked up a harbor freight touch up gun with a 0.8 mm tip. I would assume with the smaller tip I will need to add additional reducer to the sealer, base, and clear to be able to spray through smaller tip. Would you agree...

[@jackwitterstaetter1668]

I have one question can you spray epoxy filler primer

[@GarageNoise]

Epoxy can be a thicker viscosity so you'll neesd a larger tip like the 1.7

[@bigblockT75]

Hi there, great vid , convincing me to get one as well for my car repaint! Would you happen to know if the tips from my FLG4 would fit in this gun or the r500? Thanks

[@GarageNoise]

I don't know for sure but I would say no they won't. Appreciate your comment and support brother!

[@hermantom4292]

Hello Chris how much do u charge for a complete job....on 1968 C10 chevy truck

[@GarageNoise]

It starts at $8000

[@kenboxx265]

Looks great no blender needed on solid colors?

[@GarageNoise]

👍blender not necessary, but nothing wrong with using it if you choose to. Appreciate your comment and support !

[@cryptidsNstuff]

my old lph 400 appears to do less overspray at low pressure

[@GarageNoise]

👍

[@kyrptotech]

You mentioned that using the scan tool got you a better paint match. You think a scan would be the way to go for older, faded paint?

[@GarageNoise]

I don't think I would start with the scan tool. Not all scan tools are that accurate. I hear a lot of complaints from other painters. I would talk to your local paint supplier and see what they recommend. Appreciate the comment and all the support! Hope this helps.

[@thistledewoutdoors3331]

Buff the paint and clean it well before finding a color variant.... Don't rely on the cameras - sometimes they're way off... But a solid paint rep will know how to get a variant and custom tint from there.. Most times your first 2 primary mixing toner colors can be pushed up or down 5% at a time...

[@octanegarage3729]

Thanks for a nother great video.

[@GarageNoise]

Thank's Bud!

[@jimfeaster4837]

Great video! I like lot...

[@drumman-de8ku]

Please do a video on spraying single stage paint using arepro a 610

[@GarageNoise]

I'll do that I just don't spray much single stage anymore. One tip is you spray it like clear but not on the first coat. A light first coat or tack coat is key.

[@majozidavis8866]

May I pls have a dedicated video on spraying clear.

[@gilbertsanchez9953]

I really enjoy seeing your videos so have a question is there a different between r500 old style and the new black one

[@GarageNoise]

Thank you I really appreciate the support. No difference in the guns other that than the appearance and teflon coating.

[@ParvezBurkutally-hd1us]

Hi can i use this gun on a high compressor 200 litres

[@GarageNoise]

Yes absolutely 💯

[@ParvezBurkutally-hd1us]

@@GarageNoise thanks

[@ronaldvallesteros7890]

is their a mini paint gun you recommend for small compressor thats good for touch up?

[@GarageNoise]

I've never tested it but the r100 is the touch up gun version of the r500 . I've had viewers say it works well. amzn.to/3JtPkGY

[@jaimedpcaus1]

These results look amazing! Wow, I the only word I can say. By the way, what is the small compressor that can be used with this paint gun? Thanks

[@mikem5475]

4cfm minimum

[@citytech7637]

i would like to learn to paint my own small projects like moldings flares or rust repair can i use this gun with a 60 gallon 6HP standing compressor with a 3 stage air dryer in my garage or do i need a different gun? thanks for your videos i subscribed and learning a lot been a Mechanic for 30 years

[@GarageNoise]

Yes ,i believe it would work with your compressor. You want about 6 cfm's of air

[@davidsandoval8398]

What psi is coming out of the compressor?

[@GarageNoise]

Set at 100psi but 28-30 at gun

[@bigfish8473]

what air pressor should you use when spraying single stage unrathines

[@2bParagon]

I recently found your channel, and I like what I am seeing, however I'm looking through your videos for some guidance on getting rid of the trash and nibs after your done, do you show that?

[@GarageNoise]

I do but it's typically in with the wet sanding video. I have one coming out tomorrow or Sunday where I show how to remove a run it's the same procedure . Welcome to the channel I appreciate the support!

[@2bParagon]

@@GarageNoise awesome, thanks, I'll be on the lookout

[@davewallace9048]

I have a small ding in the rear center bumper 2019 Acura RDX .. can the body shop fill that small ding and paint just the center section of the bumper and properly blend it? Or will the entire bumper need painted to look correct? Love your channel.

[@GarageNoise]

Yes they should be able to fill it blend the color but to do it properly the entire bumper needs to be cleared with all components removed. So essentially the entire bumper is being painted. Thanks for watching, appreciate the comment and support!

[@kirbyconner9952]

What's different about the internal parts that make it lvlp??

[@toycoma98]

The air caps are the same with the older R500, small holes on the air horn make it lvlp.

[@GarageNoise]

No sure what's different about the lvlp. If I find out I'll let you know.

[@michaelking7495]

Do you have a recommendation for a good value regulator?

[@GarageNoise]

I like the Sagola regulator very accurate and durable it's small which is great but does make it a bit hard to see for us old guys lol.

[@anthonyhavic3251]

I can't wait to use that gun thanks for ur info I'm learning alot..

[@GarageNoise]

👍appreciate the comment and support!

[@brandonjones5438]

What pressure you spray at ?

[@GarageNoise]

This gun 30 psi

[@andrewcalixte2945]

How do you compare to kawami 4

[@GarageNoise]

This is more practical for anyone painting without a booth. The kiwami is a great gun and produces a beautiful finish.

[@jaefousable]

How much psi u spraying at?

[@GarageNoise]

For clear 28-30 base 20-25