Garmin Panoptix Livescope unboxing, install and connections

[@larryreid8562]

In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens kzbin.infoUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.

[@fishingwithjc8475]

Yes, it is. I always say it doesn't catch the fish for you, but it shows if you're in the ballpark.

[@brokenscuba]

Thanks for the pics on how you networked them together.

[@fishingwithjc8475]

No problem. Thanks for watching and commenting.

[@bryandavis8458]

*I used it, I was amazed, **enjoyable.fishing** recommend The color screen really lights up. For such a small unit it is very easy to read.*

[@fishingwithjc8475]

It is pretty amazing!

[@c219troll]

By far the best Garmin networking video on the tube. Your diagrams are great. Thanks for sharing

[@fishingwithjc8475]

Thanks so much for the kind words! I really appreciate it. Tight lines my friend!

[@johnnydee_fishing]

I will be installing my new Livescope in a couple of weeks. It sure is nice to see a detailed video on how to put it together. Thanks for taking the time to do a video and sharing it with others. Some good tips that I will use.

[@fishingwithjc8475]

Awesome, I hope it helps you out.

[@randyferguson3798]

Outstanding video, I wish that I understood Garmin interfaces as well as you, maybe I'm making it more complicated than needed. I'm currently installing my LiveScope with a single echomap 93, much more basic, I hope that I get everything connected properly, thanks for taking the time to put this together.

[@fishingwithjc8475]

Thanks for the kind words and for watching! Your setup sounds pretty straightforward and shouldn't give you too much grief. Garmin makes it pretty easy to install their products. Enjoy your sonar and tight lines my friend.

[@dalebrown9314]

The Fishing Specialties mount is capable of holding both the Live Scope Transducer and a regular transducer on the bottom. Just run the Live Scope cable through the tube 1st. You also have to make the slot in the bottom mount wider. Fishing Specialties will make the slot wider if you ask them to at the time of your order. That is how I'm running mine to my Garmin Echomap Plus 93sv. This also allows me to side scan forward & back in addition to side to side. Can't say enough good things about how flexible the Fishing Specialties mount makes things.

[@fishingwithjc8475]

Yea, I think it's the best on the market!

[@903environment]

Mines jus arrived yesterday,n now I'm waiting on 93sv screen ,n I'm like u,soooo excited man ,n ur right about everything u say it does

[@903environment]

Thanks for the awesome video bro,

[@fishingwithjc8475]

@@903environment we're like kids in a candy store! Nice that part of you (being a kid) never leaves. Thanks. I try. I'm no Jon B, but I just enjoy trying to be creative. Plus, I've corresponded with so many wonderful people, such as yourself. Don't catch 'em all, leave some for us! : > )

[@catfishrandy1]

Offset angel of bracket is for trolling motor, cable grommet is included . Nylon screws use only two for a easy break off .

[@Surfer_Ninja]

So glad you posted this. You did a great job. I've been searching for the same setup. You answered all my questions. Thxs.

[@fishingwithjc8475]

AWESOME!! So glad it was of interest to you. I had a great time installing it and it was really quite easy. Thanks for the kind words. Tight lines my friend!

[@steveking8548]

FYI: Garmin says you can break some of the fine grade wiring when you zip tie the LiveScope transducer cable. They recommend using tape (electricians tape) for each attachment of the transducer cable. VERY important on a $1000 transducer!!!

[@fishingwithjc8475]

Thanks for the comment. I should have mentioned that the zip tie is only loosely applied and the wire can move around underneath it. You are correct, it's very important not to torque on the zip tie.

[@eliteangler]

Great video! Mine is on backorder... can't wait to try it out! New subscriber here!

[@fishingwithjc8475]

You'll love it! Thanks so much for subscribing!

[@eliteangler]

@@fishingwithjc8475 Just be sure to post a video of the unit in action!! That way those of us waiting on one can "pretend" we are using it ... ha ha.

[@fishingwithjc8475]

@@eliteangler I'm trying to throw something together.

[@denniswink1721]

Really did a very informative video. My units come tomorrow.

[@fishingwithjc8475]

Thanks, hopefully you got something useful from my ramblings (lol). Good luck, I know you'll love the units.

[@montemurray4513]

Just got the 2020 Garmin Echomap 93SV UHD w/Panoptic Livescan for my kayak, amazing

[@fishingwithjc8475]

Isn't it! Unbelievable what is beneath you.

[@jd4410]

Hi one question, I'm thinking to buy echomap UHD 95sv and I want to connect with panoptix like u did but I'm gonna have only one screen, so can i connect my normal chirp transducer into screen directly and get panoptix network cable from screen to blackbox, and actuall panoptix transducer 24 pin to the black box, is it gonna work like that or I need more ports ? Thanks hopefully you will understand what I want.

[@fishingwithjc8475]

@@jd4410 here is my take but I also suggest you contact Garmin customer service before you buy anything, they are the experts. I believe your setup will be just like mine minus two screens. So look at my connections and just forget about the extra screens. It should work fine, but again, give the fine folks at Garmin a call. Thanks for watching and commenting.

[@jd4410]

Thanks for info

[@aProudOG]

Excellent tutorial! Thanks!

[@fishingwithjc8475]

Thanks!

[@laketawakoni]

I have not read all the comments but I do hope that you put a 0° mount on that LVS 32 since you're using a pole mount..and not on your trolling motor 😊

[@fishingwithjc8475]

I did, yes. Thanks.

[@yardleykennedy9689]

Very well done. Thanks!!!

[@fishingwithjc8475]

Thank you very much! I hope it helps people.

[@bass_pharmer2029]

Awesome work!!

[@fishingwithjc8475]

Thanks so much!

[@emilianmitaru6426]

Great video! Thanks !

[@fishingwithjc8475]

Thanks! And thanks for subscribing, much appreciated.

[@lonniehall9006]

Nice video, From Ashland Ky

[@fishingwithjc8475]

I grew up in Raceland.

[@jacksonbeverly3250]

The more I use mine the more I like it

[@fishingwithjc8475]

Can't wait to try it out.

[@Kat-rv5rj]

Great video

[@fishingwithjc8475]

Thanks

[@biggestpanda6477]

Just FYI if you ever out in saltwater or brackish you can NEVER ground to the boat itself. Always ground to battery, you’ll eat your boat alive inside out from galvanic corrosion. Otherwise looks good brother!

[@fishingwithjc8475]

Thanks for the tip.

[@perisooner]

JC - outstanding video! Question - If I network my 2 Echomap Plus 94sv's with the GCV-20 and my Livescope sonar box/transducer, will I be able to see the Livescope image on both 94's? Thanks!

[@fishingwithjc8475]

Yes, and any transducers you have hooked directly to either sonar unit will be shared as well. It's really quite brilliant.

[@perisooner]

Thank you!

[@allprocharters4882]

Great, thoughtful video... but at the end your diagram doesn't go over the POWER. I assume they both run off their own power, how did you connect that?

[@fishingwithjc8475]

I have the 12 volt power going to the starting battery. I changed the battery to a deep cycle/starting type. These units pull a lot of power. Thanks for watching and the comment.

[@thomasgrady9292]

Nice explanation what was the length of your base plate I see the have different options on the web site yours looks just right for my boat

[@fishingwithjc8475]

Thanks. The plastic base of the Fishing Specialties mount is 12". I didn't get the extension handle that is used to rotate the pole, but now I wish I had.

[@darksidemachining]

Informative. It would have been complete if you also showed the actual connections to your power source. The power source was not shown in your schematic @24:45 nor any footage of it and it's connectors.

[@fishingwithjc8475]

I agree. I'm working on another video that shows the power and ground. It discusses power related issues that I've experienced. Thanks for the view and comment.

[@ifishcatfish]

how does the livescope turn on and off? there is no switch button anywhere... i think i figured the rest - thanks for the diagrams!

[@fishingwithjc8475]

There is an icon on your screen that you select and it should say Panoptix.

[@ifishcatfish]

so it doesn't start until u start it from your monitor? Sounds odd... did you install a switch for the black box on the panoptix?

[@fishingwithjc8475]

@@ifishcatfish no switch is needed. It works the same as down-vu or side-vu. There's an icon on the monitor that you select to switch between them.

[@DeeDee-vu5mi]

Look in the installation guide for LS it recommends a switch to turn on/off the black box. Otherwise you better have a lot of battery capacity.

[@Mark-dj5qf]

Good Job! Thanks Can you view livescope on your other units as well?

[@fishingwithjc8475]

I can on the ones that are networked together. The one older model can't be networked with the newer ones, unfortunately.

[@Mark-dj5qf]

Thank you

[@CedrikDjelassi]

Hello, thanks the video is really helpfull 🙏. Could you please give me the references of the removable bar system you used, I can t find it! Thanks a lot

[@fishingwithjc8475]

Removable bar system? Not sure whatcha mean. Can you describe what your referencing? Thanks

[@CedrikDjelassi]

@@fishingwithjc8475 thanks JC, I'm talking about the pole on which you fixed the transducer. Cédrik from France (sorry for my poor english ;-)

[@fishingwithjc8475]

@@CedrikDjelassi I included a link in the description (https:/fishingspecialties.com). And ur English is manufic.

[@CedrikDjelassi]

@@fishingwithjc8475 thank you very much!! 🙏

[@CrappieHunter]

I love your setup and considering biting the bullet and purchasing the Livescope system. Do you have any regrets with the Echomap 93sv or the Fishing Specialist transducer mount or would you recommend them to me after a full fishing season with them. Liked all your Livescope videos - thanks in advance.

[@fishingwithjc8475]

I think it depends on what type of fishing you do. If you're a panfish/bass fisherman, then I think it's (Livescope) worth it. If you fish for carp, catfish or muskies, then you have to really weigh the risk reward aspect. If you do any type of jigging where your line is going straight down, then the Livescope is utterly amazing. If you are throwing baits on the shore and retrieving, it can still help, but the effect is diminished somewhat. Personally, I think $1500 is a bit much. But you have to pay a premium for new products. I would highly recommend the Fishing Specialties mount. It allows me to easily turn the 'ducer and also pull it out of the water when I have to retrieve lures close to the bank. It's the only place I would mount it, except maybe the transom. As for the Echomaps, I think you get the most bang for the buck with them, and I highly recommend them. Hope that helps, and tight lines my friend!!

[@fishingwithjc8475]

Done

[@c.s.3746]

Great walkthrough. I have a similar setup that I'm about to start working on except I haven't received the LS yet. How far can the chartplotter be from the module with the wiring that comes in the box? I'm hoping I don't have to buy any more cables.

[@fishingwithjc8475]

Those things are hard to get a hold of right now. I waited for about 2 months to finally get mine.

[@fishingwithjc8475]

I think it comes with a 10' cable if I remember correctly. I had to buy an extra cable.

[@c.s.3746]

@@fishingwithjc8475 Mine delivered today. I'm actually familiarizing myself with the layout of the chartplotter right now. The cable combined with the short cable that hooks to chartplotter is 8'.

[@fishingwithjc8475]

@@c.s.3746 That sounds about right. Couldn't remember exactly. Thanks for the clarification and enjoy your rig.

[@c.s.3746]

@@fishingwithjc8475 Lots of work tomorrow getting everything installed. Hopefully, I can get on the water Sunday and play with it. Either way, it's going to put fish in the boat soon.

[@rickwilliams6922]

I've got the 93sv uhd at my console hooked up to the uhd transducer on my transom . I bought the same bowducer pole from fishing speciates to put live scope on. will the live scope hook to my 93sv uhd without unhooking my transducer on the back of the boat? I would only be using 1 at a time till I can buy a screen for the bow.

[@fishingwithjc8475]

You won't be able to hook both transducers directly to the sonar units (unless the new uhd's have dual sonar inputs). You will need some sort of network connector to connect the two units together. Once they are connected, any transducer that's connected to either unit will be shared between the two units. I hope that helps. Tight lines my friend!

[@anonymous_friend]

Thanks for sharing. I'm curious how The GT34 and GT52 transducers will compare to the new GT54UHD-TM Ultra High-Definition Scanning Sonar All-in-one Transducer. I'm trying to figure out what to setup I want for a pontoon.

[@anonymous_friend]

Also curious if you end up finding that it is a pain to bend over on the bow to have to adjust the rotation of the transducer on that pole mount.

[@fishingwithjc8475]

Personally, I think the UHD transducer is well worth the money. Especially if you are wanting to network 2 or more sonar units together.

[@fishingwithjc8475]

@@anonymous_friend So far it hasn't been too bad. I typically don't adjust it much when fishing, just as you wouldn't adjust a transducer mounted on the transom. I like the flexibility of being able to move it, but also leave it stationary. It's kind of the best of both words (similar to trolling motor mount and transom mount in one). But that's just me. LOL

[@anonymous_friend]

@@fishingwithjc8475 Ok cool , I think I get it. You lock the rotating pole mount down so the transducer is in a fixed position, and instead shift your boat with the trolling motor to adjust what you see with the transducer? Is that right?

[@fishingwithjc8475]

@@anonymous_friend That's what I do. I use the forward position so it's shooting in front of my boat, and if I want to see what's to the left I turn my left. If I'm anchored down and I want to view to the left/right, then I unlock the mount and turn it left/right. They also sell a handle that you can mount to the top, so that's an option if you find yourself turning it by hand a lot. Tight lines my friend!

[@f.a.f.o]

I may have missed it in someone else's comments, but what did you do with the brown and blue wires on the power cord of the 93+ unit?

[@fishingwithjc8475]

They aren't needed, so I just taped them off.

[@DeeDee-vu5mi]

They are for NMEA 0183 devices

[@BassinProf]

So one more question. It looks like the transducer cable is wired to the Livescope box, and the livescope box is out of the way in a hatch. I was thinking that I would stow the transducer pole in a rod holder when not using but now I'm having second thoughts about stowing it because wouldn't I have to unhook the transducer cable from the livescope box each time? Do you stow your transducer when you aren't using it or do you keep it on the deck all the time?

[@fishingwithjc8475]

I stow mine across the bow with some kayak paddle clips. I demonstrate it in the video. Just make sure you leave enough free cord, it doesn't take much. Thanks

[@Williampinion25]

Doing same thing now. I noticed the 93sv that the transom transducer goes to is not linked to any other units. So if you mark a way point using that units sidescan it would not show up on any other unit. Am I correct and if so is because you ran out of ports on the expander?

[@fishingwithjc8475]

Yea, it's an older model so it doesn't network with the newer models, even if there was an open port. So I typically only mark waypoints on the two new units.

[@cbachfishing3937]

I’m being told by Garmin that the module needs to be grounded to the boat to prevent an error I keep receiving, “transducer not detected”. If this error shows, I was having to unplug the transducer cable and plug back in to reset. I will try grounding and see if this takes care of that error message.

[@fishingwithjc8475]

I got that error once too. I will have to check my ground as well. Thanks for the tip!

[@BassinProf]

Great video! I'm thinking of using the Fishing Specialties mount for my own Livescope. Do you still think it's better than using one of the Ulterra mounts? Also, do you find that the livescope gets interfered with by the trolling motor being in the way? In other words, if I mount the livescope ducer close to the TM, will the TM get in the way of the livescope beam?

[@fishingwithjc8475]

I pretty much had to use the Fishing Specialities mount because of the collar that slides up and down the shaft when you stow/unstow the motor. I have seen other videos where people have mounted it to the trolling motor with no problems (as far as I'm aware). I like the mount I'm using because it stays stationary and doesn't change every time the trolling motor turns. I use spot lock a lot and that causes the trolling motor to change direction an awful lot. If I want to turn the beam, then I reach down and move it by hand or simply turn the boat. So far I've had zero problems with the beam being next to the trolling motor. Thanks for the comment and watching!!

[@lonniehall9006]

I made my own bracket, you do not want it on the trolling motor, spinning around all the time.

[@paul.aragon]

How did you wire the power to these? Did you pull separate power cables directly from the battery to each electronic? Or did you run a thicker gauge wire and piggyback/split power at an electronics bus with fuses?

[@fishingwithjc8475]

I ran the stock wiring from each unit back to a distribution block connected to my batteries. I did another video on panoptix power issues, and I go into more depth on my wiring configuration. Just go to my channel and you should see it listed. Thanks for the question and watching.

[@brettlahey8384]

Great video. I just bought the livescope and the 93sv uhd and 7SV striker also have the Terrova 12v 55lb,I'm trying to figure out battery life of of running every thing I currently had to get two new batteries one a 12 Interstate deep crankin just for my motor 24 V for the trolling motor in current striker 7sv will I need more power since I've read livescope is a battery killer and when on spot lock Terrova already does that for me. Thanks for any advice 🙏

[@fishingwithjc8475]

I created a video just on the power issues you can have with the Panoptix. It's definitely a power hog. Give it a watch, it may answer some of your questions and give you some idea of how I dealt with my power issues. It's called 2020 Garmin Panoptix Livescope Power Issues. Thanks for the view and enjoy your new setup.

[@DeeDee-vu5mi]

@@fishingwithjc8475 my panoptix is on its on battery system. 2 ea 10AH lithium batteries in parallel to run a Plus 73sv and the black box with a switch turn on and off the black box when not used. Hope this helps I can get 2/3 days of fishing before recharge.

[@fishingwithjc8475]

@@DeeDee-vu5mi I may end up adding another battery and installing a switch. I think it's a great idea, thanks!

[@83Nighthawk]

why not mount the transducer to the trolling motor. then when you turn the motor it looks in that direction.

[@fishingwithjc8475]

Because of the trolling motor I have. It's a Terova and it's not a cable drive. You can't wire tie the cable to the shaft because of the way it is deployed. Plus I have spot lock and the motor head is constantly moving. I just wanted it to point in the direction the boat is facing and then if I want to change where it's pointing, I can just turn it. Lastly, I can pull the transducer totally out of the water if I need to retrieve a stuck lure in shallow water. Thanks so much for question my friend and I hope you'll consider subscribing.

[@brandonbellamy4624]

So I have the 106sv the GLS10 and livescope transducer. Do I need to buy the GSV20 also?

[@fishingwithjc8475]

You just need to attach a network cable from the Livescope black box directly to the 106sv. Easy peazy.

[@jeffwolff9688]

Where do the blue@brown wire go. Just purchased the 75sv. Thanks

[@fishingwithjc8475]

They weren't needed for my install. Those wires are for connecting things like speed gauges and other nav gear. You most likely won't need them either.

[@DeeDee-vu5mi]

@@fishingwithjc8475 Blue brown wires if I am correct are for NMEA 0183 devices..IE. VHF radio

[@sstaz22]

Real nice job JC. I just got mine! I have two 73 sv's. So does Livescope come with everything I need to pair the two? Have you had any issue with power drain? Did you hook up to the starter battery or set up a stand alone battery for the Livescope? What type of battery and size? Thanks for your hard work.

[@fishingwithjc8475]

Thanks for the comment. I will give you my take, but you may want to contact Garmin as they are the experts. You'll need a network cable to join the two. I also believe you'll need a piece of hardware too. I went with the HD ducer. It kills two birds. Yes, these things suck power like crazy. You'll need a powerful deep cycle battery. Mine are on the starter, but it's a deep cycle. Talk to Garmin to see what they recommend. Thanks again and tight lines my friend.

[@toyman2k]

@@fishingwithjc8475 so you went with a DEEPCYCLE / Starting battery. I have the option and room to upgrade to a 27 series Deep cycle / starting battery. Do you think this is better than just a regular starting battery? I'm liking your vid and thanks for taking the time to make it.

[@fishingwithjc8475]

@@toyman2k yes if you're going to put your electronics on the starting battery. If you have room to go to a 27 group, I think you should do it. You might want to call Garmin customer service, they are extremely helpful. Thanks. I just do this in my spare time, I like to try to be creative. I'm definitely an amateur and it's a good thing I don't have to make a living doing videos. I'd starve for sure! But thanks for watching and dropping a comment. Tight lines my friend!

[@530johnnyful]

On the GLS10 module did you water ground it too? There is a connector, just wondering if it needed to be water ground.

[@fishingwithjc8475]

All my units are grounded at a common location and that common ground is grounded on the negative post of my battery. I've changed things up a bit and I've been thinking of doing a video on how everything is wired. Look for video soon. Thanks for watching and your comment. If haven't already, please consider subscribing. Much appreciated.

[@joelcharchio5148]

I am working on installing the same setup on my boat. I have one question though. Since all the units are networked together, they will share waypoints between the 93SV plus units correct?

[@fishingwithjc8475]

Yes.

[@davidwaliczek2875]

Can you see live scope on both screens

[@fishingwithjc8475]

Yes, because they are networked together. But you will be looking at the same view.

[@buddytrent1351]

Take the zip ties off your cable use waterproof tape just saying

[@Rjhall4191]

I'm glad I'm not the only one who noticed this. I've watched a similar video, and they couldn't stress enough about NEVER using zip ties.

[@fishingwithjc8475]

My zip tie was loosely attached, not torqued down. The wire can move freely underneath the zip tie so no pressure is being exerted. It is just there to prevent the wire from getting caught on structure. I should have mentioned that in the video, as it is very important not to torque on the zip tie (as you mentioned). Thanks!!

[@joedoe9551]

I am trying to figure out if I can have one livescope to both my screens

[@fishingwithjc8475]

If you network them, they have to be compatible though.

[@samedgin9435]

@@fishingwithjc8475 How did you get them all connected with the 93sv? Don't you need a unit with 2 ethernet ports to network them AND share the livescope? I have 2 93svs and a livescope and am struggling to figure out how to connect them. Would I connect them using the GCV ? Any advice would be appreciated!

[@fishingwithjc8475]

@@samedgin9435 I used the network ports on the black box for the high definition transducer and the port on the black box for the livescope. I now have 4 screens and ran out of ports so I added a network box. When you're connected to the network ports, any transducers that are hooked to any of your graphs will be shareable on the network. It's been awhile since I recorded this video, but I think I explain that in there. You can also look at the wiring diagram I created. Lastly, you can also call Garmin technical support, they are awesome. I hope that's helpful. Tight lines my friend.

[@bransayler]

I just purchased a second 93 sv plus and planning on adding Livescope. Can I just use the black box that comes with the livescope to network both 93 plus units to see Livescope on both? My GT 52 transducer is hooked up to my console 93sv. Will I also be able to view down and sidescan on my bow unit that the Livescope will be connected to? Thanks!

[@fishingwithjc8475]

Unfortunately, no. You will need either a network box or the HD transducer setup that I've utilized. The cost difference is negligible, so I went with the HD ducer.

[@bransayler]

@@fishingwithjc8475 Thanks for the reply and clarification 👍

[@fishingwithjc8475]

@@bransayler I recommend you contact Garmin too. They are the authoritative source for their products, and I'm sure they will give you the best advice for your setup.

[@neon2272]

Can you notice a significant difference between the GT34UHD with GCV 20 box vs the GT52HW-TM?

[@fishingwithjc8475]

I haven't used it yet, as I just purchased it all over the winter. I plan on taking it out in the next few days, so I'll let you know how it goes. It's supposed to be on par with the hummingbird mega imaging. But we'll see.

[@neon2272]

@@fishingwithjc8475 This looks like a very nice setup so I'm following your diagram. Instead of the third unit with GT52 on transom I think I'm going to go with a GT8HW-IH 2d transducer and plug it into the console unit so I'll have a 93sv plus at bow and console which got delivered today. Livescope on the Trolling motor. I liked the UHD setup here because you can network through it and it saved me 200+ on the network expander I would have needed since the livescope uses this port. So for roughly 300 I upgraded to UHD. Hope it is worth it.

[@pipeliner345]

You're going to love that livescope! I'm still fascinated at mine after 2 months of catching crappie,catfish, bass, white bass. Watching the fish missile into the baitballs. What a show!!! ......the educational side of this is phenomenal. I never knew crappie were so scared of a tiny jig. You learn to change your presentation real quick. Most of the time they want it dead still. Amazing!!

[@fishingwithjc8475]

@@neon2272 That was my exact thinking when I decided to get the HD transducer. Originally I planned to sell my non-plus 93sv, but I figured I could use it as a dedicated maps unit. I also wanted to mount the livescope ducer on my terrova, bit it would have taken some ingenuity. When I did my research I came across that bowducer mount from fishing specialties and I was sold. Thanks for the comment!

[@fishingwithjc8475]

@@pipeliner345 This thing makes jigging so much easier. It's a crappie anglers best friend. That's so cool that it helped you adjust your presentation to catch more fish! This thing is absolutely unbelievable!

[@keithsullivan6942]

Just curious, can the Live View be viewed on more than 1 unit?

[@fishingwithjc8475]

In my setup they can be viewed on the two 93sx units because they are networked together. So any transducer that is plugged into either unit is shared between the two screens. Hope that helps.

[@paul.aragon]

Have you upgraded or thought about upgrading any components in the video since the GT56 transducer just came out and the UHD versions of the echomap came out? How do you feel the quality of the terrova transducer works with the garmin products compared to the garmin transducers?

[@fishingwithjc8475]

I haven't upgraded and I'm not sure I will. I'm still trying to recover from spending all those funds the first go around. I ended up not using the usb2 transducer once I realized the panoptix transducer has chirp 2d. The usb2 is usable, but it's not chirp.

[@BrandonPlummer-gb2lx]

So my network port on my black box is ruined. Do you happen to know where I can find that small piece?

[@fishingwithjc8475]

I would recommend calling garmin. Their customer service is great.

[@liemh9290]

pro tip!!

[@fishingwithjc8475]

Thanks

[@bobwallis6179]

How long is the shaft on the Fishing Specialties mount?

[@fishingwithjc8475]

The one I brought is 48", but they offer different lengths. Then there are the adjustments holes for the collar so you can fine tune the depth.

[@dajahvue]

How is the quality difference from the trolling motor to the gcv20 box?

[@fishingwithjc8475]

So the trolling motor [us2] transducer is only 2d [no chirp] , where the GCV20 is chirp and HD down/side VU. The GCV20 also allows you to network other sonar units, so I felt it was a must and the quality is far superior. Thanks for the view and comment!

[@dajahvue]

Do you ever move the livescope pole to view it buy your console or just so more at the bow?

[@fishingwithjc8475]

@@dajahvue I always leave it where it's mounted, on the bow. I turn it side-to-side, but always from that position.

[@scotwcates]

The Garmin gv20 what does that do in the system

[@fishingwithjc8475]

It does a couple of things. It's main purpose is to provide high definition signals to the Echomap plus units. Secondly, it networks the two plus units together and allows them to share all attached transducers (minus the old 93sv unit that is on its own). I believe they sell a networking unit, but that's all it does is networking. The GV20 allowed me to network and get high def signals, it's a win-win. Thanks for watching and commenting!

[@deltapromasterlauj4848]

Fishing with JC The new Garmin UHD garmin echomaps 93sv already have built in high def pictures with the gt-54 transducer.......if you have multiple UHD echomap units you would just need the gms-10 network box to share data between those units

[@solidrockoutdoors]

New Sub here Go WILDCATS! Nice vids bro

[@fishingwithjc8475]

Yes, sir...GO CATS!!! Thanks for subscribing!!

[@sxiong9908]

Will the 93sv plus in the back be able to see the livescope like the front 93sv at the same time too?

[@fishingwithjc8475]

Yes, they are networked together and share the same transducers.

[@sxiong9908]

So my brother got the 93sv with the gt52 transducer with the livescope and I just got the 93sv with the livescope so his gt52 should display on my screen too then ? I don't really want to get another gt52 transducer if I could just get this to get the better picture did. Do you have a FB page?

[@fishingwithjc8475]

@@sxiong9908 They both have to be plus units and then they have to be networked together by something like the gcv-20. I would suggest pausing my video over the diagram I have that shows my system layout.

[@fishingwithjc8475]

@@sxiong9908 oh, and I only have this KZbin sight for my fishing channel, no Facebook as of yet.

[@sxiong9908]

@@fishingwithjc8475 Yes, both of them are the plus units and I understand your setup, I was just wondering since I dont have the GT52 and my brother does, if I just get the GCV-20. Would I be able to see the 2d sonar on my screen too?

[@dronedre_fpv3143]

What battery do you recommend for the 93sv

[@fishingwithjc8475]

In my new boat I bought I bought an amped outdoors lithium. It was the 80 amp hours model, and it runs my whole system all day.

[@dronedre_fpv3143]

@@fishingwithjc8475 ok thanks for the reply my man i just purchased the bundle and it comes today im soo excited and nervous at the same time because im new to it and want to get the correct battery for it, i seen in website that the 93sv can only take up to 32 ah

[@mcdrmtt]

Do NOT use zip on your cable. Garmin recommends duct tape.

[@fishingwithjc8475]

They aren't tight, I left them loose. But I agree that tape is better.

[@andrewx209]

Where do i connect the ground wire to?

[@fishingwithjc8475]

The installation guide says to hook the ground wire to the negative terminal of the battery.

[@wickedmethods]

If i am understand what ive been reading. With your set up you are only able to get the livscope on one head unit correct? The network is just for updating, maps and such.

[@fishingwithjc8475]

No, when they are networked together they share ANY transducer that is hooked up to either unit. I get livescope on both head units and they share maps and way points. Thanks for the comments.

[@elijahs4914]

what's the battery life?

[@fishingwithjc8475]

Originally I had it on my starter battery and I'd get about 6 hours. I recently changed that battery to a combo starter/deep cycle. I'll have to get back to you on how long it lasts. When the voltage drops, you lose the Panoptics first. All my equipment places a large drain on the battery, so a deep cycle is vital.

[@yingher1663]

Where do you get the pole

[@fishingwithjc8475]

I have it linked in the description too. Fishing Specialties Bowducer Mount: fishingspecialties.com/

[@kierangrimley6978]

Would there not be good coverage if you mounted the transducer on the transom

[@fishingwithjc8475]

You can mount it on the transom, but I fish from the bow and I wanted to shoot the beam out in front of me.

[@kierangrimley6978]

@@fishingwithjc8475 ok thanks for your reply I'm just trying to understand these units more as I have only ever used the raymarine axiom, is there not a setting on the fish finder for forward view or down view? Good video by the way I'd love to fish the lakes over there

[@fishingwithjc8475]

@@kierangrimley6978 Thanks for the comments. You can change the view by clicking the transducer up and down. In the video I incorrectly say to click it twice. You only have to click it once.

[@kierangrimley6978]

@@fishingwithjc8475 ok thanks, I would be using this unit mostly for trolling lures for pike so I can't decide if this unit will be helpful are not, at the moment I'm between this and the humminbird helix 12 mega si and down image any input is appreciated by the way

[@fishingwithjc8475]

@@kierangrimley6978 livescope can be used for trolling but thats not really what it was designed to do IMO. It shines on jigging applications and searching for bait fish. The clear vu and side vu features in conjunction with its chartplotting capabilities will perform admirably in trolling applications. I suggest doing ample research and pick the one that gives you the most bang for the buck. You can't go wrong with either as they are both excellent products . Also, the livescope is $1500! That puts a huge dent in the wallet/purse. Good luck and I hope you will help me grow my channel by subscribing. Tight lines my friend!

[@eugenejohnson8635]

Peewee Herman

[@outdoorsman9384]

What is your total on this bad boy

[@fishingwithjc8475]

I was able to get a discount on the sonar units, but it still cost me around 3 g's.

[@realfaceofmumbai]

Hiii would u like to sell this I need it plzz reply

[@fishingwithjc8475]

Sorry, not interested in selling.

[@jeremyjohnston2583]

You need to let someoneelse do this for you next time lol the transducer goes on the bottom lmao

[@fishingwithjc8475]

I mounted mine on the side after consulting with the owner of Fishing Specialties mounts. He suggested this mounting type if you are worried about hitting the transducer on rocks if bottom mounted. So the mount type I used is the same as the mount you use on trolling motor shafts. It works great for me, so to each their own. Thanks for watching and the comment.

[@mackfrizzle5045]

So the Garmin EchoMAP UHD 93sv units can work with the Ultrex or Terrova downscan built-in transducer on the trolling motor???

[@fishingwithjc8475]

@@mackfrizzle5045 no, I think you have to use a Humminbird unit to use that.

[@mackfrizzle5045]

@@fishingwithjc8475 Ok Thanks

[@flaasome]

Do you need to get the black box if you use it with the ice fishing bundle kit

[@fishingwithjc8475]

I'm not familiar with the ice fishing bundle, but if you call Garmin they would be able to answer your question. Their customer service number is [phone].

[@wickedmethods]

Corey, Did you ever get the answer you were looking for? I have the same question i have a ice bundle live view last season, I have a 9in Garmin i bought for the boat this summer. this past weekend at a show i bought the Live Scope set up so im trying myself how to use both head units with one brain "black box" while being networked. I really cant find any info that is dealing with the ice budle. I may have to call garmin.

[@flaasome]

wickedmethods everyone I’ve spoken to says it’s required. I’ve found the box for 400 on eBay and the 32 transducer on there for 840

[@wickedmethods]

Corey Flaa sounds good thank you for your reply

[@flaasome]

wickedmethods those are new prices. Hoping they don’t drop a lot next week! Where are you fishing wicked?