GARMIN PERSPECTIVE MODE: Step By Step Installation Of The Perspective Mode Mount.

Perspective mounts in stock and ready to ship: www.russellmarineproducts.com...
Check out our INVENTORY:
Garmin Products:
www.russellmarineproducts.com...
Lowrance Products:
www.russellmarineproducts.com...
Humminbird Products:
www.russellmarineproducts.com...
Minnkota Products:
www.russellmarineproducts.com...
Don't forget about our Trade-in/Trade-up program, and our hassle-free financing options through Affirm Financing.
Calls us at 316.313.4113
or
email us at [e-mail]
Music by Epidemic Sound.

[@howcroft22]

Great video! I watched this a few times and just noticed the little munchkin sneak out by the trailer tire at the 10 minute mark! Love it! Kitties and bass fishing are life!

[@FishOutLoud]

I saw that sabertooth tiger cruising too...made the video!

[@bradmcclendon4597]

Another useful video with step by step instructions from RMP -- thank you!!

[@alanaho4915]

Thank you for this video! It was a welcome sight when I was notified by YT. Interesting my Livescope was already install by a Marine dealer in Texas and they used zip ties. I will leave those off when I install the mount. When I receive mine I will be referring to this video again snd again. THANKS!

[@earlyworm129]

Awesome video Josh as always! FYI the two bolts included with the mount are “shoulder bolts” you can crank them all the way down and the shoulder will bottom out preventing it from stripping out...

[@papertrader8641]

High quality video. Enjoyed it 👍

[@TheKarenjh]

Thanks for another great video, Josh.

[@TomRedington]

Great stuff, makes the install easy. Thanks!

[@williamthigpen4480]

Brett at RMP was a pleasure to deal with when ordering my setup. Keep up the good work guys. Thanks

[@DroptineTrans]

Just got mine in from you guys! Great videos!!!

[@FishOutLoud]

Thank you for slowing down and making this video understandable. You can now have your first cup of coffee! LOL

[@robertconquest5497]

Great job Josh!

[@BillaBong1]

Omfg. Finaly this is what i been waiting for. I been having my live scope since it barely first came out and neva could figure the dang position so i ended up leaving it at home collecting dust. Now i can bring it out and put it into a better investment use lol. Please more vidz of this live scope stuff anything and everything will help me or us out. Thanks again.👍🙏👊🤗🍾

[@SebProx1]

It says how to position it in the manual. Not hard to understand.

[@ralo4265]

Good stuff Josh! 💯

[@blakeboling8099]

Well done video man!

[@RoCkYfUnTiMeAZN]

Always good to see you guys in action.

[@kayakwesty]

Thank you

[@everetthobbies2062]

Thank u 🙏

[@craig9108]

That was an excellent video. Russel I have a LiveScope with my echo map plus and us an independent mount for the transducer. Would the instillation be a lot different than the one that is in the video? thanks in advance.

[@jeffreylonnon781]

This is an excellent video! I have a question....when the transducer is in perspective mode it is pointing directly down at the lower unit and prop of the trolling motor so how does that not directly block the beam? Or am I understanding what i see in perspective mode wrongly?

[@Smalltechguy]

Good video Josh. Question though. I’ve just ordered my mount and will be installing on a Fortrex shaft. Most of the videos are on the Garmin Force or the Ultrex. I know that I also have a 360 pod as well to include the hydrowave as well that will need to be relocated. Any video of the install into the bow and with some type of cover would be awesome. I’ve contacted Garmin, and they told me that they don’t have any cable management system as my birds do...thanks

[@randymanning7779]

Thanks for the video. I had a couple of questions based on perspective mode on a hobie kayak. I have the garmin panotics livescope and also have the perspective mode mount. On the left side a my kayak I have a livescope transducer mount. Is there a correct way that this is supposed to be mounted seeing that it is not on the front trolling motor. I have a torqueedo trolling motor on the back of the hobie kayak. Thanks for any information or youtube video that could point me in the right direction.

[@redaylward4527]

Great Videos 👍 I’m looking to upgrade my Bass Tracker electronics from my EchoMap Plus 73SV to the Garmin 734 and a 9 inch UHD2 chart. ? Or will the 734 Transducer do all these scans? ? In either case, i was planning to put the Transducers on my TM shaft. Is that a good idea? I’d appreciate your advice experience. Thanks, Red

[@curtevenson3271]

You say in the vid to make position changes to the transducer while it is up. When it is stowed you cant see the decal, it is on the side looking down. my first time out I had it out of position and the scope was looking backwards under the boat. Did you know it would do this? Might be helpful in some situations.

[@jdntn78]

My ridge/ groove is on the back side of my trolling motor do I need to inverse the indexed side of the bracket

[@gregmyers1864]

Does the perspective mount have an offset of 8 degrees for the trolling motor? Can it be corrected to zero degrees offset for use on a standalone pole?

[@joeculler2943]

can the transducer be easily removed for when your fishing weedy shallow areas???

[@martinbassin5220]

Can u tell Garmin to make a smaller force trolling motor for smaller boats?? I really want to see that!

[@JS-gf6uc]

How do you decide the distance to place the mount above the motor? It looks like you placed it about 6" above.

[@adriandavidpayne]

Is there a mount where I can easily flip the forward mode to face under the boat?

[@johnstarcevich2734]

I can't mount mine on the trolling motor shaft because of the way it stows (Terrova).I have the perspective mount and I mounted it on a separate pole and was wondering if I need to adjust the mount on the shaft. It shoots of t the right, starboard mount. I guess its that way to get around the lower part of the trolling motor but I don't have that issue with the separate pole. Thanks

[@everetthobbies2062]

After putting in forward mode do u have to bring it down every time u chose mode?

[@mattyrock21]

This mount gives me a great view of the bottom structure in 8-9 feet of water. But I do a lot of dock fishing in 2-5 feet of water and all I see are hot spots close to the boat since it's angled down so much. Is there any way to angle the transducer up a little bit more so I can get a good image in shallower water?

[@Anthony-rp3qh]

Dont mount on the trolling motor. Use a separate mount and pole. Bowducer

[@jasonstanley5818]

Question, mine is set up starboard mount but when in forward mode/position the side of the transducer is not parallel to the motor shaft. Seems like this would make it aim a little off?

[@lloydcoots1759]

I hook my bracket up just if you have shown and it’s a mess can’t find my Lure most of the time, and the last time I went out would not even go in to foward range and it looks way out of line when it is in forward range.? Some advice would greatly be appreciated. Thanks. Lloyd

[@TheMcChesneys]

thanks so much. When I am in forward mode now the xducer is at 88 degrees and not 90 degrees and when in perspective mode it is not completely parallel to the ground. I would say in perspective mode it is 3 degrees off of being parallel to the ground. When looking closely at the install from front does it look that way to you as well?

[@cbachfishing3937]

Frank Mcchesney put the S or the P in the middle of your trolling motor shaft. Not the line between the two. When flipped to perspective mode, the transducer should aim down a little.

[@TW14137]

You did a great job on the vid. Whoever added the background noise didn't do you any favors. The sections without music are way better.

[@darylgranger9484]

Called & got a quote from you the other day by email. My question is, how many black boxes with my order. Wanted to put on my kayak. Also how simple is hooking up? You also sent me a ( link ) for battery you thought would work for all of this.

[@kcoutdoorsmissouri4052]

What of you have a smooth shaft trolling motor

[@markhembree5675]

Great job Josh. I just finished a full Garmin system install on my boat including the Force, Livescope with Perspective and 3 Echomap Ultra units. This video along with your others on the Garmin equipment made the installs much easier. Garmin's instructions are pretty good but being able to take my tablet out to the boat and watch your vids while I was doing the installations was invaulable! One question I have: What is the preferred wire routing path/method once the Livescope wiring is at the head of the Force and the service loop is there? Do you prefer to just tape the wiring to the power and data cables from the trolling motor following the same path (outside the "tunnel" of course)? Thanks again, great job and keep 'em coming!

[@MrHittman23]

I know 7 months later.... but what did you end up doing? I’ve seen some cut the plastic on cable and use the 2 piece connector to reinstall running through the tunnel.

[@patrickcotter945]

Do you need to do perspective mode?

[@mikebrown8140]

nice video and I used it to install mine. I used it yesterday and the transducer is mounted backwards. The back of transducer is where the wires come out so it is looking towards the back of the boat installed this way.

[@garylittle7960]

Same problem here which isn’t addressed by Garmin.

[@Cerus98]

Y’all need to read the manual. Port side install the wires come out the back. Starboard side install the wires come out the front. The transducer knows what to do when orientated correctly. The angle is NOT the same installed port or starboard. There is no front or back to the transducer.

[@hbm3420]

I'm not mounting mind on a trolling motor I'm mounting it on a pvc pipe type deal can anyone let me in on how I should mount it?

[@Smalltechguy]

Hey Josh, why is it that I've not seen any video on the Live scope installing the ferrite beads for interference???

[@RussellMarineProductsLLC]

The way we run direct power with shielded 10 gauge marine grade wire, we never get interference. So we never use them.

[@alanlister1918]

Its software version 19.0 now guys.

[@Garminrules]

Looks like transducer cord is hitting shaft in perspective mode.

[@bakervinci163]

What is the music? Sounds familiar. I’m a jam band guy.

[@alanlister1918]

Do a mounting guide for Minn Kota Ulterra I dare you! Still a good vid, got some tips out of it thanks.

[@geekosauras]

Its the same process lol

[@philipnguyen2529]

Hi there, I just got my garmin panoptix livescope perspective mount. I'm not going to mount my garmin panoptix livescope on the trolling, I'm mounting on a side of the boat. My question is the kit comes with 2 shaft bracket, which shaft bracket should I use?

[@ronaldphillips8750]

I am just now ordering mine and I wondered if you found out what the answer is.

[@buckbassfishing6320]

I hope you realized you mounted the transducer backwards.

[@boonvang708]

I'm surprised there isn't an electronic one that automatically detects what mode you're in and moves it into the right position. Be wayyy more convenient

[@mattyrock21]

Josh - I don't like the bend radius on the cable when mounted in Starboard orientation and set to Perspective mode... the cable has to take an almost immediate 90 degree turn because there's little/no room between the transducer and the shaft of the Force trolling motor. Any comments or thoughts on that issue? Made a quick video to show the issue: kzbin.info/www/bejne/qGXFdK2roMaFf7s

[@edbeckley8920]

aLRIGHT , DITCH THE PORN MUSIC !

[@hntfsh2009]

Haha they get another 100 bucks for that mount?

[@huckfin1100]

Come on guys people spend all that money on your equipment and you give them plastic brackets !

[@timhensley8640]

talking volume low and music is to loud could do without music