GAS BOILER LEAKING WATER OUT PRESSURE RELIEF VALVE

GAS BOILER LEAKING WATER OUT PRESSURE RELIEF VALVE
merch = teespring.com/stores/steve-lav
/ stevenlavimoniere
lavimoniere productions llc
subscribe to my channel
/ @stevenlavimoniere
lavimoniereplumbingandheating....

[@user-sx2xy8dn9v]

Another great video Steve, remain safe and keep us entertained 👍☝️💥💯🫵

[@donhorn548]

Nice to see a clean basement

[@danwesten2771]

Basements are only as clean as the owners behind them.

[@robertblacksmith4355]

Changed my tank and pump ,bleed the air out of my boiler last year she runs better 😊Great video Steve.

[@DAS-Videos]

Another well done job.

[@jimmywr32]

great video thank you

[@deanguando1335]

Why not change out the relief valve anyway while the system is drained?

[@mjg263]

Nice clean setup!

[@sydsyd]

Steve is Great!

[@met8886]

I was wondering when you checked the air pressure in the tank and there wasn’t any, then you took out valve stem and there wasn’t any water coming out(wouldn’t that indicate that the diaphragm was still good?)why didn’t you try putting the air back in and let it ride? Someone could have messed with the air valve.

[@Kyles_outdoor_workshop]

Great video Steve! You should make more vlog videos or telling stories! Thank you, have a great day!

[@davewolfy.5932]

Love the storys

[@overwatch2671]

Clean unit steve

[@iamnoone.]

Howdy Steve and Molly

[@CommercialGasEngineerVideos]

Yes yes Esteban

[@christopherreus7799]

Hey Steve 😊

[@adrianrobins5313]

Your teaching me.

[@ClickinChicken]

yeah, steve is great. My tank in pump house is kept by faith at 35- to 50 degrees. Mamma. I'm not using the remote temp gauge this year! ha.

[@danwesten2771]

I got outa pinch once by pumping the tank back to 12 wit a bike pump. Was of course no water in it. It lasted another 2 weeks before we went back and replaced it

[@frankrizzo3915]

Hello Steve!

[@JohnSmith-cp2yg]

Hey Steve just wondering if you can give me a tip my pipes are banging in the house when my furnace reaches top temperature I bled it out real good let it run for a half hour but they're still banging could you give me any tips

[@mikegotham1087]

Have you had any issues with those Zilmets? I’ve put a few in lately and the pressure was still rising. Wondering if the diaphragm is getting stuck to the inside of the tank

[@donaldcovington7269]

Thanks Steve and Miss Molly for your videos. What make of service vehicle do the two of you travel in?

[@stevenlavimoniere]

my truck is a ford / fedex truck 14' box 16,000 gvw

[@Peety56]

What brand expansion tank do you recommend. I think the old ones where made better I got a 3 family house and tanks where installed in 1987 and still good.

[@stevenlavimoniere]

watts are decent and resemble priced .....amtrol is good also but more money .just drain the boiler or take pressure of tank and check tank charge pressure it should be 12 to 15 lbs with no load / boiler pressure on it .

[@philipjohnson2608]

Good day Steve i appreciate all you do and go through

[@rastagrastag7784]

Did you still have to drain the boiler with that shut off valve being in line ?

[@stevenlavimoniere]

to relieve the pressure yes ..drain it out

[@Peety56]

Where the zone valves on the feed or return of the boiler ?

[@stevenlavimoniere]

on supply side .. on this set up

[@clearviewtechnical]

Not a leaka no more!

[@rrbigdad]

What pressure should the tank be

[@stevenlavimoniere]

12 to 15 lbs .... all new tanks are 12 .. psi

[@iandrew6347]

Hi hi 🫶🏻🇬🇧🫶🏻

[@markpowell1031]

4th comment

[@rodneyskinner7741]

Hello Steve!