Gas Stove Burner Not Working Easy Fix 1

If your burner is not igniting... but you can hear the igniter, and smell gas coming out of burner then watch this video. its easy to fix... so stop igniting it with your lighter by hand and fix it yourself! :)

[@natanapesya2103]

Thank you! I live alone- no husband or even a boyfriend to come over and help me with my burner. I followed your advice, and it worked! Makes me miss electric stove tops!!!

[@hankrodriguezhill7029]

Good job girl hope everything went well

[@hm2011100]

Me too! Good on us for working it out. My next step is to take a complete DYI course 💪🏻

[@oxnardadrianlopez6684]

Dang that must suck.

[@quratulainmalikquilling9864]

I have husband but useless I have to take all the stress

[@stevepolk1]

this tip worked exactly as described! the igniter port was clogged so badly that I couldn't even find the hold at first...an easy fix and saved lots of $

[@bengiarraputo9357]

Thanks so much for making this video. My right rear burner wasn't igniting and I followed the video. Cleaned all four and now, they all ignite quickly as well. Thanks for the tip and for saving me a repair bill.

[@daysurge2525]

Thank you Sam for leading the way in helping me repair my stove.

[@jesseluna4406]

Thanks for the quick fix! Was in the middle of cooking and experienced this problem. Typically I just clean it out completely and it works. Knowing exactly where the issue is helped fix it in seconds! I am a bit in a hurry so don't have time to clean it out or take it a part so I just poked the toothpick in there directly and worked immediately.

[@hm2011100]

Thank you, you just saved me a couple hundred dollars & a lot of hassle!!! Long live KZbinrs like you 🙏🏻

[@googiesfairyfarm4834]

Holy cow... I wish I had found this video several years ago. Dealt with a clogged burner on my Frigidaire stove for years because I couldn’t figure out how to get the thing off. I wish I had found this video before I finally figured it out on my own. This is exactly what I needed. Thanks for putting it out there for others who need it.

[@reginapasqualino9565]

There's always a smart person with a less costly fix!

[@fernandomartinez2086]

Simple fix... Worked like a charm. I took completely apart and cleaned... Wouldn't still ignite... But never thought about that little hole... That was the problem... Thank you sir

[@palomaquerida604]

This worked! Fixed my burner and my big middle burner as well! I thought i had to pay a repair man! Thank you for the video!

[@lizcofano3000]

My man thank you. Took me legitimately less than 2 min to fix my burner. Thank you and KZbin. Gotta love it.

[@diane4474]

This was a great video! I thought I needed a new stove! Followed these directions and boom! Burners working again. I will mention that the first burner after I unclogged the small opening came right on, the second one, no luck. So after repeating the clearing process, I tried it again. Still no luck. So what I did was manually light the burner and let it burn for about 3 minutes. Then I turned it off and tried it again, just using the knob on the stove. Success!!

[@thomasschwartz4899]

I had this exact issue. Your video was clear and fixed my issue. Thank YOU!

[@mikewright66]

Not sure if the person who made this video will ever see this, but I was having the same problem. I was going to call my home warranty people and that would have cost me $75 in a service call. So, I looked my problem up and found this video. Took about 5 min to fix....very easy!!!! Just when your done, put on the small black top thing back on the burner or the gas wont light. The top black thing keeps gas in the burner so the ignitor lights it. If the person who made this video is still here and your in Carson Nevada look me up.....I owe you a beer!!!!

[@jeanmonroe177]

OMG, I'm so glad you mentioned putting the round cap back on top of the burner, mine didn't light after cleaning until I did that!

[@Kodikat2]

Thanks Sam you save me a lot of trouble and a visit from a repair man.

[@killerinJP]

One time I have some oil on the cave and it was not able to light. Even I clean many times, still didnot work out until I saw this video. No dirt at all, but just a small oil block the hole could cause the same issue. Thank you Sam

[@stephaniethole5960]

This was PERFECT! Totally fixed my burner! Saved me from paying for a repair

[@dorcia7able]

Thanks so much. You really made it easy to understand. I’m going to try to fix my burners now. Wish me luck!

[@chris-zu6sf]

Thank you for demonstrating how to fix the problem. The toothpick easily broke free clogged debris and I used a 3/16" socket wrench to loosen the bolts from the burner on my Kenmore stove.

[@biancalizardo2544]

Thanks, i needed to know the socket for size

[@mugensohc2.271]

Thank u !! I was about buy another 1000$ stove .. cleaning it now ..

[@talitha.abrahams]

This worked so quick! I didnt have the tools to remove but I poked a needle through the hole and it worked immediately :D thank you!

[@charlesdaniels5666]

I scrapped the area with a steak knife. Damn I tried to burn the stuff off but burnt up my over head microwave

[@jenniferray4702]

Thanks for this-just what I needed to fix my burner!

[@arc562]

Thanks for the tip . . .Worked just fine.

[@joshlucero9639]

Worked great! Thank you so much. This is what you tube knowledge sharing is all about!

[@carlosdelgadillo1866]

Thanks man Saved me from my nagging girl 😂

[@ParleyPCat]

Thanks Sam! Had I known this was such an easy fix I would have been using more than the single working burner for the last 4 years😝

[@tonyahandy7170]

Holy crap. I have one working burner right now and thought I was the only one silly enough to let it get down to one, cthu!!! The kinds of meals I cook, we were eating dinner between 10:30 to11 something at night, lol.

[@tonyahandy7170]

PS: Doing this I only got one of my three broken burners back to working, so that's still better than just one working, lol. Gonna let my husband try to fix the other two. One clicks and has the gassy smell, the other doesn't click at all and I didn't wait for a gassy smell.

[@ParleyPCat]

@@tonyahandy7170 Same, it worked for the 2 on the right, I've been lighting the left ones manually, but maybe Sam's part 2 will work: kzbin.info/www/bejne/Y5nWiaKXqtaLf8U&ab_channel=SamSam

[@ingrid2543]

Thank you! I’m lucky that my husband does 95% of the cooking which he likes to do, but he is the messiest cook I know. So I clean the stove, grates etc. and I guess it was the hole that got clogged. I didn’t even have to remove the burner, just stuck a toothpick in and then used a small dry brush to wipe off the top of the igniter and then the burner lit!

[@vmperkins9168]

Thank you so much for this video. It helped so much. My stove is working like new again.

[@STAREXOAK]

2 burners did not ignite. Now fixed. Thanks so much!

[@independentuser8015]

Thank you for helping!!!

[@John-tj9mt]

great tip. Thanks Sam! I'll give it a try. Having exact same problem you describe.

[@janiesanchez2418]

Thank you so much ❤️..I was ready to go buy a new one

[@bladesxf]

Worked great! Never thought about that tiny hole on the side!

[@reginapasqualino9565]

This was a little helpful for my KitchenAid - my burners dont have that "little hole". BUT< I still removed it, used a gentle brush on it, (even though it was pretty clean), gently poked a toothpick delicately in the tiny hole where the gas comes out from - and VOILE! GAS! thank you Sam

[@scotttoutant5344]

Thanks Sam...a good toothbrushing and safety pin port cleaning did the trick!

[@builtontherockhomestead9390]

Thank you. Ran out of propane but since a delivery my stove hasn't lit. I'm guessing this is the problem so I'll be cleaning the burners today. Hopefully it is and not an issue with the tank.

[@jeffpollard7304]

Like a lot of things, keep it clean and it will give you years of good service!

[@rickschieni2162]

Thank you, this fixed my problem !

[@daveyankovich7853]

We tried everything, cleaning everything to no avail. You showing us the clogged hole triggered our repair. It's a small burner and hard to see. Thanks much for this video

[@nishedh4157]

Thank you. This helped a lot.

[@sheiladiaz2359]

Thank you I watched this and did exactly what you said and did! plus used a wire little brush and scrubbed it down ! Worked great after that !

[@indigobeauty1]

What screw did you use?

[@jamesgibbons7558]

Worked a treat. Thanks for posting.

[@NguyenNguyen-zq4oh]

really clear instructions. thank you so much! it worked!

[@ce6486]

Thank you so much for this! Super quick and easy. Thank you thank toy thank you.

[@fishjellyfilmreviews]

This was very helpful. Thank you.

[@dannymiller537]

Very helpful. Did it and it worked. Unclogged the port. Got flame

[@learningtogrowinChrist]

Thanks I believe this is what I need to do will do that tonight! Just did it and that was it!!

[@TheLorraine1964]

What did you remove the two screws with?

[@TheLorraine1964]

N

[@ISLANDER1089]

Sam, thank you for your video. I followed your tips and now my burner works like new again.

[@sufiakhatun157]

My burner lits but won't stay on? Pls help

[@ISLANDER1089]

@@sufiakhatun157 I'm no expert Sufia but you seem to have a different problem than the one in the video. Do you have multiple burners? Do they all light but then turn off or just one of them turns off? If it's just one then just make sure all the tiny holes are clean from food or debris. Something is blocking the flow of gas.

[@sufiakhatun157]

@@ISLANDER1089 thank you for ur kindness so much

[@ashdric1]

Thanks !

[@stevemeyer6308]

Thanks for the tip! Works great now!

[@beatricewilson8339]

Thank you so much, great work this is brilliant

[@bonnies.9372]

Omg it fixed my burner! Thank you so much!

[@panchovilla3304]

Thank you sir! Stove top burner fixed 👍

[@catboyzee]

Great tips, thanks for posting.

[@jindo333333]

Hey hey hey! Thank you so much. Great tip.

[@davidwebb2568]

This video is gold! Thanks!!

[@michellebrett3476]

Thank you very helpful. Got my burner going.

[@crystalslaton8804]

Worked great, thank you so much.

[@multikarya6677]

thank you for your knowledge

[@ezscratcher6546]

Great vid, simple and fast. Thanks for the help.

[@paulinekarengo417]

All the way from Kenya Thank you. Very helpful I was so much worried about my cooker.

[@leslienelson7016]

Thanks for your help!

[@d.l.saatzer8021]

Great video! However, you might want to emphasize that you should never use any kind of chemical cleaner, when working with any gas issues...🤙🤙

[@shrutijoshi2193]

Thank you so much for sharing. My problem is solved in jiffy

[@huangshiyang121]

It works. Thank you!

[@ronarnold132]

Good job, sir. Thank you.

[@davidstoll7312]

I clean these all the time. You can just take a paperclip and poke that hole without taking it off and clear it out

[@thegretnaexperiment2.021]

Thank you so much ❤️ Once I removed the grates I was able to see the hole. No removal necessary!

[@lilyclement-brown8853]

Thank you. I think this will fix my problem.

[@JoseHernandez-sd7kj]

Thanks for this video helped a lot it's short to the point and best of all it fixed the problem

[@luisramirez4905]

Beautiful video and very important thank you 👍

[@Kifkiffingtonthe3rd]

Thank you! This is a the video I needed. Some other asshat was like the top just isnt leveled. Your amazing ty!

[@pochusham1651]

Thanks ,Sam ! That's very helpful n works !

[@phucinh9632]

Thanks, I fix my gas stove by watching this video.

[@pucholive1]

Thank you. You have a new subscriber!

[@ms.edwinasmith520]

This works! Thanks a bunch!

[@marlinegamble1584]

Thank you so much!

[@bubbapenn571]

Worked perfectly thank you

[@vinnysantangello8982]

nice video i didn't have to take it off i just used a paper clip

[@tooslow1976]

Thank you for that fix

[@miaaguilar3943]

Thank you. Your video helped me 😁

[@AbulKalam-cd2cj]

Thanks for easy fix of my burner(ignitor tiny hole).

[@SR-xw7ux]

Hi, thanks so much for the video. My problem is what you described in the beginning of the video, where my spark is weak or faint on all burners. Would that be the igniter module that is defective? Thanks again.

[@Illmu]

life saver!!! Thank you!!!!!

[@Wyndu777]

dude.....THANK YOU!

[@sateradebose]

It worked!!! Yay!! Thanks so much!

[@lavanyasanga1668]

Thank you , your video helped

[@ThatGuy-dj3qr]

Perfect! My challenge is that the two screws holding in the burner in place are corroded. I was able to turn one screw (Robertson head), but then the head just popped off the screw leaving the thread i place. The other screw has a stripped head, so it will be even harder to deal with Now I am nervous about proceeding. I fear it might become a major project.

[@jorheybhai]

Excellent, its really worked

[@myaitaliano5100]

Thanks for the help

[@yaxiong6965]

Hey thanks sam I about to buy the new ignition wire, just the hole was plugged up.

[@sollila2515]

That worked! Thank you

[@mtso1122]

Thanks for the video. May I know what's the size of nut driver that you use?

[@martinnoriega2351]

Thanks that was so easy.

[@jesshill1007]

Despite the knobs are in the OFF position, should the gas main feeding the range be shut off too? Need an answer ASAP so I can fix my burners on my Kenmore Elite.

[@gonugunta63]

Thanks for sharing this video it helped us

[@misterx4757]

Thank you 😊

[@armando1333]

thank you for the clear and quick explanation- very helpful

[@inderjitkaur4544]

Thank a lot ,i had this type of problem with my gas burner .Thank you 🙏🏻 very much iwill clean now.Can i use needle to clean hole.?

[@palomaquerida604]

My burner lights, but it's a very dim flame that barely gives heat. I wonder if it just needs this cleaning. I'll be doing this this weekend first! Thanks!

[@teresab208]

I have to try this, thanks

[@jolieceenyc]

Hi. Can you please tell me what drill bit or drill do I need to take out the screws. I have the same stove. Do I just buy a bit to attach to my drill I already have or buy a new drill? Please help.

[@zenBoy323]

wow! my burner has not been working for months. i put it through dishwasher, scrubbed with wire brush etc. but it still didn’t work. after watching your vid i grabbed a needle and within 30 seconds it was working again. thank you so much!

[@familia4guzmansalas377]

what did you use to get the screws off???? a bit or screw driver? size?????

[@baileyacct9665]

One of my burners has a hot spot the flame shoots out stronger on one spot then other side any experience with that ?

[@gandolf77777]

thanks fast and easy