Gasoline Hedge Trimmer Restoration | HT230

I found this hedge trimmer from Japan recycle shop, but it didn't make in Japan. There are few problems with this machine such as clutch drum, carburetor, piston ring and blade that need to fix.
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show

[@nickjanssens]

A really good watch, a touch of realism was injected when it didn’t fire up, keep them coming.

[@Akc64]

24:42 im glad to see that you're don't afraid show your mistake) it's strongly!

[@alpeshpardhi9572]

My favourite channel bro

[@troyna77]

My favorite video segments is where you measured the thread pitch and then resized the bolt to M12 and pressed the bearing into assembly AND removal of the sheared bolts! Thanks!

[@gear_show]

You're welcome, thanks for let me know.

[@boueng]

Konitywa, Master! Thanks for video!

[@gear_show]

Thanks for watching!

[@patrickmorrissey2271]

Great Job Sir. That valve thing inside the carburetor, is almost always bad... diaphragm, you called it.... Just plan on changing it..... It's always bad. They get brittle, they get messed up, they don't work....

[@gear_show]

Okay, thank you so much for sharing! I will check it.

[@patrickmorrissey2271]

@@gear_show You did change it... Later in the video, you went back in & replaced it... The first time through, I was surprised you didn't. I was suggesting, for future reference, you just change that every time the first time, and save yourself a headache...

[@MohamedMostafa-vg7ku]

That's so brilliant your friend from Egypt 🇪🇬 greetings

[@yeagerxp]

Very good restoration 👍👍👍Thank you for sharing. Be safe🇨🇦

[@gear_show]

My pleasure, thank you!

[@user-zr7yo3es4l]

Холостые большие, сцепление выйдет из строя раньше времени. На холостых режущая часть не должна работать(что на бензопиле, бензокосе, бензорезе с алмазным или корундовым диском и тд). С опора на поршне нужно было земенить(они уже разбиты), по хорошему вовсе поршень под замену, а цилиндр нужно было проверить на зазор колец в нем(если большой - замена), коленвал в подшипники нужно было садить на анаэробный клей(посадка просажена, убьёт со временем его). Короче ошибок простых хватает

[@user-kj7gr4wv7o]

Вроде старался человек, а косяков мелких вагон. И всё это приведёт кто тому, что весь труд на смарку(

[@luisperezfidalgo5458]

I found him some time ago and i love every video of his. One of my favourite channels for sure. I wish he uploaded videos more often. But i understand every piece needs its work and its not easy at all. Keep it going!!

[@gear_show]

I'm so glad to hear thank you so much!

[@thamtran9333]

@@gear_show i

[@thamtran9333]

@@gear_show ở đây

[@Ishimazure]

Youre amazing bruh. We are so lucky to have u here. thanks

[@djevo3441]

Nice job my friend congratulations

[@gear_show]

Thank you! Cheers!

[@markdunford3181]

I’ve watched your channel from the beginning. You are so interesting and your work is great. It encourages me to repair things…not to your skill level, but at least to have a go! Thank you

[@gear_show]

Thank you very much for always watch all my video from the beginning!

[@pitaeata8493]

good to see your face a bit. keep up the excellent videos!

[@gear_show]

More to come! Thank you so much!

[@ukaszuczak2248]

I loved watching how you working ☺

[@gear_show]

Glad you enjoyed it!

[@troyna77]

This should be a small engines repair video. You did a great job!

[@gear_show]

Thank you very much!

[@user-nl5xd2mq8x]

Second life,for old tools💪👍

[@darinwilton9122]

i saw the gasket for the muffler and thought to myself... yep, been there, done that lmao

[@gear_show]

Error happen all the time...

[@zafirisroulakis9855]

This was very informative. I' ve watched many of your videos and the were always inovative and fun to watch. Very nicely done. Keep on!!!

[@klim5151]

Наконец-то хоть в этом ролике он не устанавливает аккумуляторные батареи.

[@harbor1587]

Зато как он устанавливает кольца на поршень... 🤣

[@justarideout]

Your inspirational, I'll restore my own trimmer now. Good Job well done

[@gear_show]

Please do it, I'm glad to hear that. Thank you!

[@Muslim_011]

Well done 👍

[@gear_show]

Thank you 👍

[@user-oe2cs3mf6q]

Приветствую, люблю тоже реставрацией таких инструментов заниматься. Вам лайк 👍

[@nathkrupa3463]

Wow you are extraordinary and genius thanks sir for sharing this wonderful video.

[@jaskarnsingh5053]

Very grateful work bro, and I have enjoyed the work, god bless you.

[@gear_show]

Glad you enjoyed it, thank you!

[@SohanLal-yq1su]

Thanks a lot for nice explanation.

[@gear_show]

You're welcome, thank you!

[@valmirramos4195]

Gratidão GearShow!

[@gear_show]

Thank you!

[@sreenivlogs----marine1411]

Exhaust close by gasket 🙄?... Nice job bro

[@mas_ter92]

Very wonderful one of the best channels I have to watch ❤❤❤❤❤❤❤❤❤❤❤❤

[@gear_show]

Wow, thank you

[@weldingbilgin]

Çok güzel bir paylaşım olmuş 👍🤝🇹🇷

[@abdmas7955]

great work

[@abdullah.a3237]

I follow you from Egypt and I love your content so much

[@gear_show]

Thank you so much!

[@rephleX67]

If you press Ball Bearings in like at 15:15 you should press them in at the outer ring. In you'r scenario the Balls had to translate a angular force to the outer ring. This will most likely damage the Ball s in the Bearing and can lead to a much quicker failure. But i think you know that, thats why you use a older Bearing ontop but just wanted to let ppl know.

[@restorerestoration4705]

Very good restoration

[@juliorloco]

Exelente video son muy buenos saludos desde Honduras.

[@mohamadmansour2595]

My favorite channel, keep the good work man 👍🏻👍🏻

[@gear_show]

Glad you enjoy it!

[@alejandro5575]

Excelente video Gear Show

[@gear_show]

Thank you!

[@user-kt2hb8xr3p]

Great job, thank you brother. You are so talented

[@gear_show]

My pleasure, thank you!

[@gastonmartens7797]

Genio. Muy buenos tus videos. Me encantan! Muchas feliciraciones. Saludos desde Argentina.

[@Theunknownman52]

What's the name of that small power tool your using

[@jamesfield5346]

Nevermind... You caught it. Lol

[@dahlesa]

You don't usually break out big tools on your videos but this time they were big, very big.

[@gear_show]

Yes, this is my big project. I learn more thing from this work.

[@gear_show]

Yes, this is my big project. I learn more thing from this work.

[@aliajamek8342]

watching after 5 minutes video was released.

[@gear_show]

After finish, how do you feel?

[@j.c1748]

I used to own the exact same one under a different name, which was called Moutfield

[@diegovd7215]

Fantástico, que laburo !

[@gear_show]

Thank you!

[@gear_show]

Thank you!

[@RustyDoctor]

Прикольная пила😋 впервые вижу

[@Leningrad_DE]

А я впервые вижу торцевую головку на 40-50. Пила такая у меня есть, я ей живую изгородь на даче подстригаю

[@RustyDoctor]

@@Leningrad_DE круто🔥👍 вот бы мне такую найти и тоже отреставрировать для канала 😋

[@user-zr7yo3es4l]

Эт не пила, а кусторез

[@user-zr7yo3es4l]

@@Leningrad_DE не в новинку, на 95 эт вещь, на ногу уронишь - понравится. Да в прочем, это не самая большая. Лучше поищи в нете мультипликатор 1 к 1000 и больше, во удивишься какие головки на него цепляются под его квадрат

[@RustyDoctor]

@@user-zr7yo3es4l ой точно мельком глянул не сразу признал😋 если нравится реставрации,то и ко мне заглядывайте😋👍🔥

[@LordAnubis0909]

Dam.... 10min to take i all apart 🤤

[@gear_show]

Yes, will you get bored?

[@LordAnubis0909]

@@gear_show no no. I'm just stund how many parts there was. Didn't expect so many

[@RestorationAustralia]

Very cool, well done. 👍

[@gear_show]

Thank you! Cheers!

[@re-fix9678]

very nice👍👍😘

[@gear_show]

Thank you!

[@Tranthanhbinhvl]

Vườn nhà đẹp quá!

[@garretrounds5815]

Cool

[@khizarali89]

Good job👍

[@user-wy4ps1gk4d]

Классные штаны у чувака в конце видоса-фИрма!!!

[@gear_show]

Вам понравится?

[@fxcracker381]

Nice job man

[@gear_show]

Thank you so much!

[@fxcracker381]

@@gear_show pleasure sir

[@user-vh9zm1ww3k]

한국분이셨군요 가끔 이 채널영상 봤었는데 이제알았네요...ㅎㅎ 구독누르고 가용

[@ocho545]

Gooooood~~~

[@Me11oIngenuity]

How many of you were screaming at the screen when the muffler gasket was put on the first time? Heh! Good catch!

[@gear_show]

I don't know why that time, I did this mistake.

[@sleepysnoot8881]

@@gear_show Just for lowering the emissions. :)

[@arisusnto3314]

Z . Without jfk

[@mohammadmohbarkeh7851]

انت مبدع 🌹👍🏻

[@gear_show]

Thank you!

[@ryanvercoe1140]

I have one of these but it called a T-Maker. Identical to your HT230. WhenI replaced the carb it ran ok. In your video the shears are moving after you start the machine on the bench, mine was the same. The shears are moving at idle, I have since been looking at videos to see if this was common, but I think not. This was part of the reason why I cut my finger badly, because the shears are moving even when not pulling the trigger. In your second start up on the grass I noticed the shears were not moving at idle speed, This way the machine is much safer to use. I will try to set my machine up so the shears don't move at idle speed. Are you able to tell me how you set up your machine in this way, do I tighten the bar screws? Great video, a fluke I have the exact same machine.

[@ezequielsilva2709]

Ótimo trabalho 👏👏

[@gear_show]

Thank you!

[@garyalensr]

Absolutely amazing work my friend!!! You did an awesome job bringing this hedge trimmer back to life. My only question is why didn't you clean the carbon off the top of the Piston?

[@jamesfield5346]

What about the exhaust gasket. No center hole?

[@MichaelVx]

i thought its a saw to cut wood but it seems i was wrong in the end xD never seen these tools in my life

[@michaeldominy2084]

What are. You using for cleaning the parts.?

[@robertblack6941]

I wish I had access to channels like this when my father’s reciprocating saw needed restoration. It burned up, so I discarded it. (There was no internet back then).

[@gear_show]

Dedicate time to watch restoration videos, you will, can do it one day.

[@BigPlus-li9cl]

@@gear_show 4​44ພແ444​44444444444444444444444444444444444

[@relojesdecontrol]

Muy bueno !!!!!

[@BlueBlazer47]

Just realized these little machines must have a non-float carburettor (UK spelling). They work upside down!

[@RestorationVideo]

hi. I have been following your channel for a while. I love the restoration theme and I'm a fan of you. I am also doing a restoration channel and hope that you can give me some suggestions about my restoration videos. I'm really grateful.

[@gear_show]

HI, thank you for following my channel. Please make the video that is easy to understand. And you should also think about the​ video quality too.

[@RestorationVideo]

@@gear_show thank you

[@RestorationVideo]

@@gear_show I will try to improve my videos. I am very happy for your feedback. thank you very much.

[@ismailhakkalpsolak5264]

I liked your threader set. Which brand is it?

[@gear_show]

Sorry, I forget its brand.

[@yusufabdrahman592]

Good ii boss 👍👍😊😊

[@gear_show]

Thanks 🤗

[@mikestevens4174]

What assembly grease do you use?

[@chrisross-smith4358]

Love your videos, just wondering what's with the "gear show" watermark?

[@alpeshpardhi9572]

Please convert petrol chainsaw to electric chainsaw with motor

[@omarmohmmed]

أحسنت بارك الله فيك

[@gear_show]

Thank you!

[@troyna77]

Was that epoxy that was holding those sheared bolts in? That gray stuff on bottom of bolts looked like dried up JB weld.

[@yeagerxp]

That stuff is thread locker used by the factory

[@gear_show]

It is thread locker.

[@faceless4970]

I don't know why all trimmer come with lot of plastic pieces is not solid at all

[@the_chicken_lord_]

the greese looks like curse d sweet n sour sauce

[@DD-DD-DD]

Would have been perfect candidate for DC conversion... :(

[@gear_show]

Oh really, I'm glad to hear that.

[@Saber_Matrix]

👍💯

[@pasanpramodya4728]

Super

[@gear_show]

Thanks

[@Herr-Anti]

Nice, But why u blocked the exhaust with the gasket xD 24:40

[@gear_show]

Maybe I was wrong then

[@lightbatmen]

13:45 Что-то пошло не так: и бензиновую технику стал обслуживать, и ёмкость для мытья запчастей стала больше, и воды больше использует.

[@user-pi8vt7ut3n]

...ни какая это не бензопила!-, это бензокусторез!!!

[@koenvelaers9876]

Great video but I do not understand why you don’ t replace the clutch and use original gaskets, it can’ t be that expensive…

[@willieb76]

I wonder if you heard us all yelling about the exhaust gasket the first time you put it together before it had a hole in it. As if millions of voices suddenly cried out in terror and were suddenly silenced.

[@sheerluckholmes5468]

I just looked at it and thought to myself "He's going to pull that apart again."

[@davidepiccini9254]

Niceeeeeeeeeeeeeeeeeeeeee

[@gear_show]

Thanks

[@douro20]

I think the engine is a Zenoah clone?

[@venturinix]

Bel video bravo. MA TROPPA PUBBLICITÀ!!!! 😦

[@arifsanjani8857]

Can you make glue gun cordless ?

[@MarkKratzMC]

👍👍👍

[@gear_show]

Thank

[@passionsmultiples3512]

It's only cleaning ! 🤣😂

[@zoparossii]

МОГО МОГО МОГО МОГО БЕНЗИНА КУШАЕТ УЖАСС УЖАСС О БОЖЕ.😱😱😱

[@takis12345]

👍👍👍👍👍👍👍👍👍👍👍

[@user-ix5xg2mr3r]

В конце зачем-то горчицы нафигачил в механизм(

[@josebrito5755]

😮

[@slavioparush]

21:59 😨 horror, beat with a hammer on a balanced crankshaft! The seat must be heated with a burner, and the bearings must be cooled, no force should be exerted on the crankshaft.

[@truc_thang_mini]

Kênh này ở vn hả bạn

[@user-hn4gr4ed7u]

Хорошо что бензин, надоел уже аккумуляторный инструмент.

[@user-ux8xs1nu7n]

В другом видео будет переделка этих ножниц под аккумуляторы

[@trabantfreak2370]

Yeah more gas stuff.

[@gear_show]

Yes, I will...

[@trabantfreak2370]

@@gear_show cool i will be watching then the time comes.

[@hienut4749]

Bạc zin sao ko để sai