New Walther PDP 4" Compact Tabletop Review and Field Strip

[@MDpolo]

So far, one of the most detailed reviews on this pistol that I have seen. I’m starting to think that my channel was the only one not to get one of these ;-) Thank you very much for the video.

[@inspiredtorhyme]

As a new gun owner I didn't know much about Walther or any other brand of firearms, but I bought this gun last summer and it does not disappoint. Its just really esthetically pleasing to hold and shoot. The grip really bites into your hand which gives that "I'm in control" kinda feeling which I think is important. The recoil does take some getting used to but overall this gun gets a 10/10 for me. I plan on changing out the rear sight and adding a red dot to it as well. Just a really great gun.

[@faustoramos8840]

One if not the best reviews of this gun to this day . The pros are clear as well as the cons ... Awesome... I can relate since I have both , the Ppq q 4 tac and the new Pdp . GREAT!

[@bigmike716]

This HAS TO BE the nicest pistol to sum up what 2021 requirements are, I NEED this gun, lol.

[@faketaxi474]

I agree. The only thing I’m worried about and not familiar with is a polymer guide rod

[@Pew_Meister]

@@faketaxi474 The PPQ comes with one too and it was very reliable for me in about 2-3k rounds. I only changed it to steel to reduce a bit of the muzzle flip

[@SeekingHalo]

I bought one yesterday

[@waterhead1359]

Maybe wait for gen 2

[@dn8276]

@@Pew_Meister In my PPQ 9mm I changed it, too. With no remarkable difference in comparison to standard polymer rod 😁 Great expectations, no miracle 🤷‍♂️😁

[@10acreplayground-gunjourne98]

So grateful for the manual as a first time gun purchaser. Been super helpful and very clear.

[@jesseareopagita5734]

after seeing numerous videos about the pdp 4" compact, your video has convinced me to get one to put in my collection. Have been contemplating for months, I'm sure my wife will hate me for getting it. I told her it's my birthday gift LOL! Can't wait to try it out in the range. Thanks.

[@juniorlemke5484]

About 8 full reviews later you're the first to tell me ill be getting a voucher for said red dot plate. I was stressing cause I never picked which plate I wanted.

[@GBGuns]

We try to be thorough

[@remoaustin2056]

I gave you a "thumbs up" just for the disclosure in your Opening. Thank you! Hopefully, they read it. Great video, too!

[@jackk1583]

Appreciate the slow methodical takedown with emphasis on detail. Very nice machine/tool/ tkx for posting.

[@gregtaylor5444]

Can't wait to try one, my wife loves Walther so she will probably have to get one

[@baomao7243]

She may even need two

[@grumble9160]

Just bought one a couple of weeks ago and I would put the quality, innovation and reliability right up there with my HK USP .45. Gotta love the German Engineering

[@roselotusmystic]

Picked up PDP Compact with 4" Slide yesterday to go with my OTHER Walther Stable 7 PPQS (4 polymers, 3 SF) Tried the FULL frame but the Compact actually felt BETTER in my SmallMed ManHands 👏 - ARMED Progressive in North Dallas 🙏

[@roselotusmystic]

I imagine at 6'5, GB The FULL will feel like my Compact AND you get 3 extra ends @ same price I love the fully adjustable rear sight but intend to ADD 507C X2 I was shocked to discover Dawson has no adjustable MOS rear sight Anybody suggest what Dawson fixed front and rear suppressor sights might pair to give a 15-25 Lower 1/3 ZERO? Other nonDawson 'Glock' alternatives? Thanks

[@stopthephilosophicalzombie9017]

Nice Garand Thumb reference.

[@thisismagacountry1318]

If you plan to KEEP that Firearm, please stop voting "Progressive".

[@trublu3483]

@@thisismagacountry1318 yeah wait a second? Armed progressive ? Lmao. Like armed leftwing nut? Jesus please don't say that

[@jalcanites2939]

Being a former P99 and current PPQ owner, I definitely will be getting this once the buying frenzy has died down.

[@dn8276]

Amen 👍

[@thisismagacountry1318]

Black Friday

[@jblaze600]

Hoping the PPQ M2 compact doesn’t get phased out before I purchase one. I can’t find it anywhere.

[@buffalosoutdoors]

I'm very interested in this pistol. Thanks for the show.

[@roadstomadness2335]

Getting this tomorrow. Can't wait, thanks for the review 👍

[@jp1419]

How do you like it? Shot it yet? Curious how it will fell IWB.

[@christopherh1327]

Yeah buddy how is it do you conceal?

[@LeoHernandeznyc]

It's very strange...i own a Walther creed ( my first handgun in which I thank this channel on educating me, I LOVE the gun) springfield armory xds, walther ppqsc, glock 19 and a sars B6 (which I bought new and never fired in October but had surgery and can't rack the slide). Of my experience with these 4 brands I keep coming back to Walther's. I really love their product, seems they always have good quality product.

[@bigmike716]

Red dot for sure! Thanks for the GREAT videos!!!

[@ricks2651]

I enjoy your "What's for Dinner" section.

[@Morbid611]

I love Walther! I have a PPK/S and a Creed. I must have this PDP compact for carrying

[@Prism0912]

Stopped in my local Las Vegas dealer and was surprised to find that these were in stock. Immediately bought one and can say that it's everyhing Grahm says it is. A little disappointed that holster (and extra mag) availability is so limited at this point but I'm sure that will change as more people acquire this gem.

[@GBGuns]

There are plenty of holster makers (Walther even listed themontheir website). As far as mags, theold PPQ M2 mags work.

[@ahahm]

An excellently detailed review of PDP! Walther PDP looks as good as PPQ!!

[@smokey-qq6hd]

Better I think

[@trainyourdog7351]

Just ordered it today after seeing on a magazine I was delivering a couple days ago. It's a sexy pistol and I needed it!

[@sais9221]

Beautiful. Added to top of my wish list!

[@TheFps12]

Just got one. Feels great. One of the best triggers. Great texture on grip, grippy but not too aggressive. And I saw elsewhere that the slide and frame are interchangeable with the PPQ.

[@DCRUZ547]

Looking forward to seeing a refresh of the PPS in this same style.

[@MikeSchmidt]

I'm a lefty and noticed that you said the slide release does not torque. I would liked to have seen more of the frame in your video to see just how the slide release was constructed for this gun. Thanks!

[@Kratos_God_of_50_BMG]

Yeah they have another 4" with an 18 rnd capacity, but I prefer the 15 rnd model because that shortened grip is much easier to conceal.

[@ricks2651]

I shot with and without reddot and I enjoy shooting it either way. The pinky pressure really makes it easy to get on target with the reddot.

[@HotVoodooWitch]

This was very helpful for me because my 4" PDP-F's guide rod and spring are like this 4" PDP Compact's rather than the 3.5" PDP-F's. Thank you!

[@DIYDad1]

I’m so happy Walther didn’t change the best parts about the ppq. They left the same grip shape and profile, left the internals the same so we know it’s going to be a proven and reliable platform. They simply updated a few things people complained about like the grip texture aggressiveness and ability to mount an optic without deleting the rear sight. Both wins in my book. Maybe now the ppq will come down in price and I can score one for a good deal 😂. Good review and nice gun!

[@adam72788]

It’s an absolute beauty. Currently Walther has no plan to release this with the paddle magazine release. I totally understand that in the US market it’s not that popular, however I prefer the paddle release and hope they do so in the future.

[@txtravler1]

my first edition PPQ had the paddle mag release and I thought it much superior to the USA style grip button release. Most who tried it actually preferred it or said they thought they could get used to it very quickly.

[@adam72788]

All of my Walther’s (PPQ, P99) except for my PPK have the paddle mag release. My carry gun, the HK VP9SK, has it too. Since I have smaller hands, I’m able to actuate it better by using my middle finger instead of having to re-position my grip to hit a button style release with my thumb. To each their own though. It comes down to preference and training. I’ve trained my whole life with paddles so I’m better with that. Here’s to hoping Walther offers the PDP with it in the future! ;)

[@Veldtian1]

The bio-mechanics of the paddle is at least 2x as economical.

[@Leftshoe72]

Just bought one the other day. Waiting for it to arrive. First Walther!

[@robinj.9329]

Very nice gun! And your right! A great manual is always very important. Personally, I never touch my brand new gun, until I've nearly memorized the manual! And I've been shooting and owning guns since, oh, say about 1965?

[@alejandrovargas7592]

From my view, this is absolutely perfect for me, except for one thing. I wish the slide was narrower for easier concealed carry.

[@christopherh1327]

Totally agree man, awesome option with the pdp except for the fat slide. I’m thinking of getting one really soon. A big question is if the compact can take an 18rd mag I think it can

[@ricks2651]

Nice pic of all of the different projectiles. My friend made me a shop display of 70. I used it for explaining the types we used to carry in the shop. Now, it sits on my a shelf in my office. Such a downer.

[@stopthephilosophicalzombie9017]

70 types of ammo?

[@ricks2651]

@@stopthephilosophicalzombie9017 yep. It has FMJ's, Reg holly's, shredders, fract's , frag's and inverted holly's too. That's why there are a lot more.

[@stopthephilosophicalzombie9017]

@@ricks2651 What's holly/inverted holly?

[@ricks2651]

@@stopthephilosophicalzombie9017 look up Truncated Cone Hollow Point Ammo and Holly's just mean Hollow Point Ammo.

[@erichartwig5265]

Only 1 dealer in town got these. They only got 2. Both full size . I got lucky and took one home. Very nice, I will look for the compact later on. Have the PPQ M2,PPS. Both excellent pistols. This one seems as good if not better. Have not tried it out yet.

[@AaronGraves]

Thanks for the great tabletop! I've been debating on selling my Creed lately, and I'm thinking about it even more with the PDP coming out. At least I'd be replacing Walther for Walther :)

[@stopthephilosophicalzombie9017]

The Creed is probably the best "budget" 9mm out there. I almost bought one the other day then I heard this was coming out.

[@AaronGraves]

@@stopthephilosophicalzombie9017 yes, the Creed is a fine weapon in its own right. I just haven’t been “attached” to it. I’d like the PDP much better me thinks.

[@stopthephilosophicalzombie9017]

@@AaronGraves No doubt. The Creed is like a 914 Porsche and the PDP or PPQ a 911.

[@kawikadee9670]

1. When shooting you should always know how many rounds you have left in your magazine. 2. If you know your gun you don't need a press check. The ejector will tell you if there's a round in there. 3. Pinky pressure brings down the front of the gun.

[@roberttosa2560]

Now this is a great review. Best I have seen on the PDP. Thanks so much. Subbed

[@GBGuns]

Thank you and welcome to the channel! We separate tabletop from range video. The range videos are called "shooting impressions"

[@settleschris1965]

Your range video really showed how awesome this pistol is,keep up the great videos!!

[@bmac9936]

Something new to be added to my Walther toy box. All positive updates to the PPQ series. (I understand the PPQ Tac barrel is interchangeable with the PDP 4”.)

[@thisismagacountry1318]

Is that the threaded one?

[@bmac9936]

Yes. Walther website has a list of compatible parts, PPQ-PDP, and the threaded barrel is not specifically listed but I know of no reason it wouldn’t work on the 4” model PDPs. You should ask them for clarification before shelling out a couple of hundred for one.

[@CutandShoot5x5]

Enjoyed this review vid very much Graham thank you!!!

[@chadrageus]

Just picked one up today probably my best pistol. My first walther. Thanks man.

[@jp1419]

Have you carried IWB? Curious if the compact is too thick for everyday carry.

[@GBGuns]

That's all about your own preferences. The PDP compact is smaller than what I usually carry, but it comes down to personal preference, clothing style, holster, carry location, etc

[@marzancastro]

I ordered mine today, can't wait to have it!

[@naji2naji]

PDP uses Walther light trigger spring. That explain why the trigger is better than the PPQ.

[@920WASHBURN]

I'm buying this gun. That being said, the pinky pressure is nonsense. My ppq has it and doesn't come with red dot cuts.

[@gazzabyerun9556]

Its a beautiful gun, probably looking at getting the compact model. Nice review!

[@DavidLLambertmobile]

I prefer the 4" compact size over the larger full size PDP. I had a brief chance to get a new PDP 9mm full size with the LE officer, mil price: $520.00 but elected to wait for a 4" compact. From what I know these PDPs take Glock after market sights. I'd add this new engineered design to up the 9mm vel & punch 🥊 sounds good. If the PDP line can feed, cycle 💯 that's my main concern.

[@jamesg8246]

Looks like a good double stack alternative to my PPS M.2 RMSc.

[@ontarget1312]

Apples and oranges! Can't compare those two.

[@jamesg8246]

@@ontarget1312 Care to explain? My PPS M.2 RMSc is pretty much everything I want in an EDC handgun. This is not a huge departure aside from the double stack mag which makes it heavier and less comfortable to carry.

[@fishfood8719]

@@jamesg8246 I have the PPS M2 non-optics ready and the PPQ M2. PDP is essentially an upgraded optics ready PPQ. Which is relative in size to the Glock 19, CZ -P10C, HK VP-9, M&P-9 ect. The PDP also comes in a larger variant comparable to a G-17 or duty size. PPS is a single stack subcompact=shorter barrel, shorter grip and thinner ( Glock 43, Mp Shield). A Walther PPQ subcompact, Glock 26, HK-VP9sk, are double stack subcompacts( compact - subcompact used differently by different brands). I'm sure eventually they will come out with the subcompact version. Only added thickness, keeping shorter barrel and grip. There is a big difference carrying my PPQ and my PPS, PPQ is harder to conceal.

[@jamesg8246]

@@fishfood8719 Yeah I'm happy with my PPS M2 as a daily carry.

[@ontarget1312]

Fishfood has beat me to it.

[@765para]

Nice video! I would really like to see the different speeds of the projectiles coming from different Walther barrels. How about a comparison of the PDP 4", newer PPQ 4" with polygonal rifling and probably an older PPQ 4" with traditional rifled barrel?

[@GBGuns]

Walther have had stepped chambers for decades. It's sadly part of the "high bore axis myth" because it can make recoil feel a little snappier.

[@765para]

@@GBGuns Good to know, thanks. There should still be a difference in speed from polygonal vs traditional rifling though, right?

[@seveglider8406]

@@GBGuns The PDP comes in 3 different Mag capacities. Does the gun with the largest mag capacity have the largest grip. My hands are large and I don't want a pistol with a grip which won't have enough room for my entire hand.

[@Lorenzo-fw3gx]

Thanks Graham! Yeah I don't think the muzzle play had any effect on Mrs. GB accuracy test!

[@bigmike716]

EVERY BOX IS CHECKED!!!

[@stopthephilosophicalzombie9017]

I wish they had flared the mag will a little more but with 15/18 rounds the only folks that need that are competitive shooters.

[@RaddestDad]

Aimpoint ACRO, you can cowitness the factory irons

[@stopthephilosophicalzombie9017]

Seriously? It looks so tall.

[@RaddestDad]

@@stopthephilosophicalzombie9017 the base plate mounting is the lowest

[@vernrogers3954]

How are a lot of people grabbing these PDP's but everywhere I searched they are sold out just like all the ammo and other guns?

[@thewatcher611]

This looks very similar to a Canik TP9SF Elite I used to have. One thing, if not the only thing, I didn't like about the Canik was the sight plane was so high above my hand. It shot well, but was kinda heavy for the size. This looks like it could be about the right size. I have a G43x now, so I'm not really looking now, but Walther is one that seems to actually improve things, instead of just make the same thing but cheaper.

[@GBGuns]

The Canik was a copy of the Walther P99 and PPQ series

[@zjenji]

This will be my new carry.

[@shenmue5507]

I recently built a thousand dollar glock 19 using a polymer80 lower. This gun basically has the same exact features besides for it having no night sights or aluminum trigger. You're basically getting the quality of an apex trigger kit without the trigger shoe with this gun. In polymer80 terms this gun is worth around $830 and you're getting it for $600 😳👍. It's honestly one of the best deals I've seen in a really long time. If I would have known this was coming I would have never built a p80. Im definitely going to buy one!! . Im going to wait a year and let the company work out any problems it might have. It seems like most gun's have minor issues throughout the first year. I have a really good feeling about this firearm :). It might be the best one yet when it comes to pistols under a thousand dollars.

[@christopherh1327]

Hey buddy it’s been over a year do you have a review of the walther?

[@stopthephilosophicalzombie9017]

I want to call it the Personal Defense Pistol as well. Just rolls off the tongue. I've heard it called that by others also. I just got back from Cabelas in Virginia and sadly they didn't have one in stock despite showing it on their website. I was going to drop the money then and there. All in all it looks like a great update to the PPQ, but I honestly can't understand why they did it now when the market is screaming for micro-9mm guns, from Glock's 43 line to Sig's P365 which apparently was the best selling gun last year. I hope they do well with this, but the PPS and/or CCP deserve an update (with improved capacity) also.

[@scottsaylors1996]

Walther is THE most supportive company of the 2nd amendment period. Those guys do so much to support our rights.

[@BalrogUdun]

Hopefully they come out with a 45 variant

[@thisismagacountry1318]

Perfect, because I was thinking about the PPQ 45, but these improvements would make all the difference.

[@williamparks1503]

I own both the PPQ M2 and PPS M2 models....but darn it, I want this one too!

[@CutandShoot5x5]

Right??!!!!!

[@69deputy]

M1 for real Walther fanboys. Paddle for life! 🧐

[@CutandShoot5x5]

@@69deputy I can’t tell if this is a diss or a compliment?! 🤪

[@69deputy]

Compliment I own several Walthers in various calibers but I can’t stand how they are abandoning the paddle mag release!

[@CutandShoot5x5]

@@69deputy ahhh gotcha sorry about that! I prefer the paddle mag release too. So much easier for me to operate!!! Curious why Walther would abandon superiority!

[@fredhancz3097]

Nice concise picture of said pistol; thanks.

[@richki.24]

I love my Creed trigger, even over my Canik ...

[@3wheelmannc860]

When a factory version is available with threaded barrel and suppressor height sights I'm in for sure.

[@stopthephilosophicalzombie9017]

It takes Glock sights now so it won't be hard to find suppressor sights. Likewise it takes threaded barrels from earlier PPQ's.

[@stopthephilosophicalzombie9017]

@9mm Weiner This one is already pretty "tactical".

[@CampDavid54]

Reminds me of the beretta apx sans optic cut, your thoughts ?

[@no_handle_required]

I found one at my local store and had to buy at the price they were asking, waaaaay below retail. But damn, Walther is proud of their stuff aren't they? Still, such a nice semi-auto.

[@darthvillarious]

Graham, try taking the PPQ M2 slide and putting it on the PDP frame and see if it works.

[@Tradewerk]

Justin Opinion confirmed that you can interchange slides between the PPQ M2 and PDP.

[@stopthephilosophicalzombie9017]

@@Tradewerk So did that shill Sootch.

[@awokeone7997]

@@stopthephilosophicalzombie9017 damn, that's raw! Shill

[@paulpc44]

My compliments! Awesome review... I think I just found my next side chick!

[@duroisgawd]

One gripe I have with Walther is magazine availability. You can never find PPQ magazines in stock. I know mecgar makes the magazines. Is Walther that much of a German manufacture penny pincher that they can't put in a large order with mecgar?

[@Broski__]

We need this thing in a subcompact

[@mattjustin3596]

Need need.

[@nickthomas6545]

They already have a compact

[@Broski__]

@@nickthomas6545 Ya, and now we need a subcompact.

[@nickthomas6545]

Well if your talking like the p365 size

[@Broski__]

@@nickthomas6545 I'm talking like the PPQ SC size.

[@jimrodriguez8047]

Would be very interesting to see a side by side, PPQ non-stepped vs. PDP stepped chamber velocity experiment to see if there really is a difference.

[@GBGuns]

The PPQ has a stepped chamber too

[@jimrodriguez8047]

@@GBGuns interesting..I didn’t know that. So nothing really new there...

[@thisismagacountry1318]

@@GBGuns What about the PPS M2? I have the LE model with 3 mags.

[@wbwills2]

That’s a 2021 Walther alright.good stuff.

[@mfaracing]

Excellent video as always.

[@coffeeder]

great review graham. its soo helpful of my purchase!

[@GBGuns]

Glad to hear, that's why we do this!

[@ManeIndian]

Honestly out of the line up, I would go full sized. They look more like a range and home firearm. Not that you can't conceal the compact. Just looks beefy, especially with warmer weather around the corner.

[@GBGuns]

The PDP Compact is smaller than my daily carry K100D

[@mbot48]

Sold! I'm gonna buy one!

[@ricks2651]

I love my PDP and we are selling out daily in 3 hours.

[@virtuaguyverify]

All guns are selling out daily where I live

[@amendment2711]

First time Walther owner. I’ve had this gun for a week. I can’t see myself ever parting from it.

[@GBGuns]

Welcome to Walther ownership!

[@Crustymarine]

Your open letter to the Ewe-Toob Stasi is worth the sub!

[@user-jetmachinist]

Everything about that gun is innovative.

[@guardianminifarm8005]

Outstanding. Thanks. Looking forward to an opportunity to handle & shoot this Walther.

[@NorthWestGuns]

I was finally able to see one of these and I can honestly say I would put up my Glock to make this my new edc

[@GBGuns]

Coming from a Glock to the PDP is like going from a Chevy to BMW. Be prepared for a whole new level

[@johnhanson7920]

Guess im old school the extent of Walther i own is P38 and PPK/S first gun i ever bought was a 1985 Walther P38 but the one i have now is a 1943. Thats a nice gun though.

[@AGC828]

I'm still not sold on red-dot. I think it's the toy of the moment every one is trying to push on the consumer. We didn't need it before we don't today. We have to retrain to use it effectively...making us less accustomed to iron sights when the battery suddenly dies. Pluz, in a "real" situation (e.g. personal/home defence) situation the shooting distances will be closer we assumed and the point will no longer be getting 2" groupings (on a moving ...more likely multiple...targets). A head to head with the HP VP9 is inevitable. Maybe you could do one. Or, wait to see what HK puts out in response to the PDP. I'm betting the VP9 still feels better in most hands. Which matters more than anything else IMHO. If any gun doesn't "feel right" in our hands we're not going to shoot it. How it feels will affect our accuracy. ..obviously. Or should be obvious. PDP...sounds like a good gun...if you don't already own a few semi-polymer guns already. But what I'm thinking is...how long will it be before Walther puts out a SF version of the PDP? :) Like to wait and see if/when they do. Probably get the SF version instead. Even over the HK VP9 or their 2021 gun which won't be all steel. Odd they never made a steel 'slide/frame VP9.

[@maxfit68906]

This means the PDP might cause a flood on the used market with PPQ M1’s & M2’s 🤞🏽

[@edstringer1138]

The M1's will be snatched up the paddle release are great

[@paulford9021]

I’ll be watching for $300 PPQs, for sure. Probably going to snatch up a PDP when I can... but I’m with you. Barely used PPQs will be out there. People who only ever shot 300 rounds through the gun and have to have the newer model.

[@ch-ir8ld]

noice, mine is in the mail. cant wait to pick it up

[@martina6212]

Wish they would make a Glock 43x size 12-15 round pistol with all these features

[@stopthephilosophicalzombie9017]

I know. I frequent the Walther forums and people have been hollering for that exact gun for years and Walther decides it's time to overhaul the PPQ when everyone wants CCW guns (the P365 was the best selling pistol last year and possibly the year before).

[@martina6212]

@@stopthephilosophicalzombie9017 I’d buy that pistol in a heart beat. I live in Florida and carrying a 19 or ppq in the summer is a kick in the balls.

[@roel.vinckens]

Very thorough. Subscribed. I would love to see that velocity comparison and the red dot in the field!

[@GBGuns]

We opted to not attach a red dot so that our review was true to the pistol and not influenced by any one particular red dot's weight or accuracy: testing just the pistol. That can bee seen in out Shooting Impressions video.

[@roel.vinckens]

@@GBGuns Seen and enjoyed that one. Also very thorough! Still, if the velocity comparison and red dot review would be possible I think I wouldn't be the only one to enjoy your take on that...

[@jasonarellano8759]

Thank you for this review, can you do additional reviews to help left handed shooters please.

[@GMdieselman]

Looking up videos on the PDP and this one begins with Train of Consequences by Megadeth….you have my attention sir!

[@faustoramos8840]

Any holster in particular that you recommend for the PDP 4”?. Order one from this particular brand OWB , but print to much , not tight at all in your waist . Feels really good for duty carry , range and training but not for carry.

[@jeffw.5462]

Excellent review, thanks! Are the serrations on the slide sharp, like those on the CZ P-10 pistols?

[@GBGuns]

No

[@triggerman1092]

Is the trigger better than the canik tp9sf elites? That is the best trigger i have ever felt, even better the the ppq

[@Quality_Guru]

Curious how it will do on the range.

[@GBGuns]

That video will be out soon

[@Quality_Guru]

@@GBGuns Looking forward to your review!

[@XrayMike17plus1]

I've seen it demonstrated that you can put a PDP slide on a PPQ. It would be interesting to see a PDP slide on a Q4 SF grip....

[@GBGuns]

Haha, I posted a pic of the PDP 5" on PPQ M1 frame. The Steel Frames are different and not reverse compatible

[@XrayMike17plus1]

@@GBGuns That's a drag. Oh well, thanks for the reply.

[@GBGuns]

No problem. If it helps the PDP frame shape and feel is basically a polymer version of the Q4 SF

[@roselotusmystic]

2 Models There is actually a Third Model in the Wild . . . RifleGear in Dallas had ONE FULL with 4" Slide yesterday

[@johnnysilverhand6045]

That’s the one I want

[@stopthephilosophicalzombie9017]

@@johnnysilverhand6045 Why do you want that one?

[@whatfreedom7]

Hopefully they will make it in .40 or .45.

[@dn8276]

PPQ was produced also in .45 ACP and I think that PDP in 45 will be Walther's next step. I am waiting on some recoil reviews, because PPQ in 9mm Luger was remarkable more leaping gun in comparison with f.e. Glocks or CZ P10C...

[@morriszachrisson8359]

13:39 Such question please. DE means Germany. What does CA mean? And what does that petal symbol or what it is mean. It is engraved directly after CA. Please reply.

[@InsurgentX]

No factory target is included by Walther now? And no paddle mag release. Dammit, I'll still buy one but I must protest!

[@thisismagacountry1318]

I have the 5" PPQ with paddle mag release sold at Gunbuyer.com. Got it in black for about 469. They offer colored barrels for more.

[@emiramick5305]

And here I was hoping for some small handgun, possibly single stack for ccw from Walther. Yeas, they have CCP and PPK but something higher quality in 9mm and hammer fired would be appreciated.

[@stopthephilosophicalzombie9017]

I don't get it either. The market is screaming for CCW handguns with high capacity (the P365 was the best selling gun last year and the year before) and Walther decides to redesign the PPQ. It was needed, I'll grant them that, but people have been hollering for a Walther answer to the P365 since it was released 2-3 years ago. Perhaps their reasoning was that all those people who bought P365's won't be easy to sell a new gun to so soon? In any case my PPS is still a great shooter and I don't feel under gunned carrying it as much as I'd like a few more rounds in the magazine just for insurance. It's not enough of a worry to get me to go out and buy a Sig. They are actually too small for my hand. I was hoping they would redesign the CCP.

[@petermonck5448]

Can't wait for what's for dinner. 👍☕😎