Gbody LS Swap simple fuel system setup

[@racermiguel82]

Love what you did here, doing the same at the moment. 87 MC LS2 6spd.

[@elcowarren]

Bad ass fam! Glad this popped up. This is exactly how I drew up the diagram for my ladies 79 el… it’s nice to see it all ran and in place in your vid.. She has a Sniper setup and imma run the -6 hose how the factory hard line was ran. Much appreciated bruh!🏆🏆🏆

[@willierebuildz9182]

Thanks bro I be checking you out nice builds you doing great work👍🏿💪🏿

[@sereous67]

Looking good. Slowly but surely. And thinking ahead for future maintenance. Good luck 👍

[@willierebuildz9182]

Thanks💯💯

[@focused313]

Thanks for sharing your knowledge man! Saving me time and money!

[@willierebuildz9182]

No problem glad I was able to help with your build👍🏿

[@manueljohnson6301]

Thank s cuz simplicity you big help

[@kingartsprojects4150]

Hey Willie,I have a 1980 Malibu coupe that I'm going to attempt my first swap with. I'm going to be watching you yo get some knowledge and ideas, thanks for sharing the info.

[@willierebuildz9182]

Thanks for watching good luck with you build I like the Malibu coupe💪🏿💪🏿

[@deerealiist7411]

Hello my friend blessing weekday to you and your family I wish you and your family a great day ☀️👼😁and thank you for sharing this appreciated upload

[@papergatorzfedducca7998]

New subscriber!! Thanks for the info!! Keep going!! ALL GAS NO BRAKES OR BREAKS!!!🔥🔥🔥

[@willierebuildz9182]

Yes Sir welcome to the channel all gas no brakes💪🏿💪🏿💯

[@papergatorzfedducca7998]

I forgot to subscribe before I left last time, but I’m subscribed now😂😂😂

[@willierebuildz9182]

Welcome to the channel thanks for the support👍🏿👌🏿💯

[@louisziegler3690]

Nice work great video

[@willierebuildz9182]

Thanks much more to come👍🏿

[@louisziegler3690]

Have you done a video showing how to wire up the ls swap?

[@willierebuildz9182]

@@louisziegler3690 not yet but I will stay tuned coming soon

[@louisziegler3690]

Ok cool

[@MRRANDOM1]

Chipping away at it! 🔥🔥💪🏾👍🏾

[@kingsaunders765]

Thanks

[@SS_Gang777]

That's a good idea 💡

[@MrIAINTGOTIT]

Nice job

[@adrianmr.gbodyt2359]

I need to get that tank, I’m using a Holley fuel pump on mine wit the efi setup… I had those same lines at first then swapped it all out for push lock

[@willierebuildz9182]

I was gonna use the push lock but I dont really trust it

[@adrianmr.gbodyt2359]

Hopefully u have better luck than me, as soon as I went efi, it leaked everywhere… no issues with the push lock

[@willierebuildz9182]

@@adrianmr.gbodyt2359 if I have any issues I'll go push lock i have all the fittings just have to buy the line i have to use push lock on the transmission lines because of how the line made on my trans cooler

[@adrianmr.gbodyt2359]

I did the same, what transmission u using??

[@willierebuildz9182]

@@adrianmr.gbodyt2359 4L60e transmission

[@bonezshakergarage]

Great video bro. You can get that water proof plug for the fuel pump is on eBay.

[@willierebuildz9182]

Thanks for the info👍

[@marcusmumphrey6995]

That's a nice mc you have there, go be pressure once you get finished up on it. If you find those female connectors that plugs into that male fuel pump unit could be kind of enough to link or let me where to grab from? Thanks and can't wait to see hear that mc fire up

[@willierebuildz9182]

www.amazon.com/ONLINE-LED-STORE-Connector-Assembled/dp/B0160G7IHA/ref=asc_df_B0160G7IHA/?tag=hyprod-20&linkCode=df0&hvadid=312192374842&hvpos=&hvnetw=g&hvrand=6845702062583669445&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9052790&hvtargid=pla-567743772846&psc=1

[@willierebuildz9182]

Thanks bro you can find those connectors any where online probably Ebay as well that's the one I used hope this helped👍🏿

[@dougwoods1710]

What fuel pump did you urlse

[@slicksloth_416]

So the factory sending unit in the tank feeds into external fuel pump and that's it

[@willierebuildz9182]

No grand national fuel tank walbro fuel pump feed engine I tank fuel pump

[@Timbrosgarage]

Ayyye nice whip good work, what headers you got on that motor??

[@willierebuildz9182]

Hooker LS swap headers from the Black heart kit

[@BLACKRAIN390]

THAT'S GOING TO BE FUNKY 🤝👍✊💯 KEEP GRINDING FAM ✌

[@freddiejames9324]

Did u ever get connection for fuel tank

[@willierebuildz9182]

Yes sir the car is running

[@freddiejames9324]

Where did u get connection I’m doing my 88 mc ls and don’t wanna cut either

[@willierebuildz9182]

@@freddiejames9324 you can get it off ebay or Amazon it's a 12 guage 3 wire connector

[@MrBhustle]

Yessir

[@montemoe]

Part numbers for a fitting on return and feed line on tank?

[@willierebuildz9182]

Just get the corvette filter/regulator with the fittings already on it

[@papergatorzfedducca7998]

Hey bro I have the 1987 MONTE CARLO LUXURY SPORT fuel injection with fuel pump in the gas tank. 5.3/4l60e combo. My question is do I need to change the fuel pump inside the gas tank? Thank bro.

[@willierebuildz9182]

Yes most people run the Walbro 255 fuel pump

[@papergatorzfedducca7998]

@@willierebuildz9182 ok thank you bro!!!

[@deewaa24fly]

@@willierebuildz9182 if I have a regular gbody gas tank does this work, or do I have to buy that type of gas tank (w/ baffle)

[@willierebuildz9182]

@@deewaa24fly the baffle keeps fuel stored under the fuel sock if your car was originally fuel injection the tank should have a baffle in it but if not it will work you just cant run the car low on fuel

[@CLMoore-nn1xy]

What part of Louisiana you from!

[@willierebuildz9182]

New Orleans

[@DiablitoSpeedz]

🔥🔥

[@kalebwebb6644]

Did you use a 4.3 v6 tank and sending unit? And what pump did you use for it?

[@willierebuildz9182]

Grand National tank

[@kelvinwillis7344]

6an for feed and return lines?

[@willierebuildz9182]

Yes I use 6an

[@bxli3902]

Can u link the an line and fittings for the filter

[@willierebuildz9182]

The line is an6 you need 25ft the fittings are an6 fittings and the filter is a c5 Corvette filter all can be found on ebay I'll try to get the links with the correct amount of fittings

[@willierebuildz9182]

www.ebay.com/itm/Black-6-AN-AN6-Straight-Swivel-Hose-End-Fitting-Straight-0-degree-fitting-/174457674263

[@willierebuildz9182]

www.ebay.com/itm/111944026936?_trkparms=ispr%3D1&hash=item1a10624b38:g:s-EAAOSw1JhgF6YN&amdata=enc%3AAQAGAAACkPYe5NmHp%252B2JMhMi7yxGiTJkPrKr5t53CooMSQt2orsSR84A%252FGMxXIqJzFmDq6lDLloCd1Dq2d1ygDk4YlYLhrWlgiqAECs9IGrGZ9ENuhSSseyfNFbuHKw%252FaljKhzdpJe0WziythPYKVfEopMsY8M%252F05D4eu3IRYPN13vDv5%252BQ8j%252BkYOO%252BZJk1lT3a0GLfNnP6je7WcdI%252BvFvLZWojYISIjKvOZzhCw10rGxL%252FjNm6q%252BQzrleyJrYq1fyKOg1aJN6iRRMGzVz87eshai%252FZXqR4g7hA47R3c3JfuehG4uhhKJY9CtxWGpQNhxEZD4x3aHDKSFi7j4cNReRWtETQQmkBh9qdV2mhBBQqzn8LBUc6nMxaNKosBb3KGfXz5AsQcTx2NeAbmOSq4r9k5Mx3FYo3GY6IwXR9TJSoIT4gaCljJU2vLkWQBSX2oR2SS6PjHwX%252BNm4dTGNErGKtDRqRy25ttaVh7K3eLiU1MgK190Etmwf7csZHxyzB49WUtfN0AJSeVxo5HSaPOn%252FUKiKyQIDkQEjC6Kpk5321HDvs7pSwqjT6EAuK5N3gCeWyWqwbL89oHRamiWZ3cBX3hB2CtUCI4831CEDJHFyart%252BJKDknn%252BkI7E2mOygzKVqXFtVhnsEzhcg3sTHml4qGhSiYCg%252BEFGwl4XxIAVhMzKiBwrUAe7tBcR94m3v5kl8Rc9YdmdS0QM7%252FSuuk8TBEKG4VIdu4jluoS0NYagfX9Hw1ZoyhX4AiH6gEg2LcCt7nQ1pPwi3n%252Fp55RkX0M8BgKJQlzAtdVTbXXG2QqigId9bRYu%252BfRkLI4spTuuqo7UDeAa1i5IECMZr9kOHTR5CRYLWUAJ0nB2NZp%252BlC8hCh1T%252FvED%252Bdc%7Campid%3APL_CLK%7Cclp%3A2334524

[@willierebuildz9182]

I can't find the line in 25 ft except in the kit 20ft wasn't enough on my monte carlo I ordered 10ft more you my need more are less depending on your swap hope this help👍🏿

[@hussleforthemuscle1814]

How did you wire it up

[@willierebuildz9182]

Just like it was factory but I ran my hot wire to the fuel pump wire on my current performance wire harness

[@hussleforthemuscle1814]

@@willierebuildz9182 how difficult was it wiring the new harness to the car.

[@willierebuildz9182]

@@hussleforthemuscle1814 not hard at all your going to keep the body harness all your doing is using the stand alone harness to control engine/transmission all the wires on the harness are labeled took about 1hr and fire in the hole

[@hussleforthemuscle1814]

@@willierebuildz9182 yessir, I appreciate it

[@willierebuildz9182]

@@hussleforthemuscle1814 you can do it not hard at all do your research and trust the process that a nice Camaro you got over there

[@damiengotti7803]

What headers are those

[@willierebuildz9182]

Holley hooker black heart

[@adanrangel7686]

What are u going to do about ur rear end?

[@willierebuildz9182]

I'm going to Rebuild the rearend truetrac posi 373 gear and new axles

[@adanrangel7686]

Is that 7.5 rear end?? I have a 78 monte doing a ls swap a shope told me if i rebulid my stock rear end it wont last with that 5.3 in it...what do u think?

[@willierebuildz9182]

@@adanrangel7686 it will last truetrac posi unit with moser axles it will hold up now it you plan on going to the track every weekend and running slicks 7.5 might not hold up very long

[@adanrangel7686]

Thanks i appreciate it

[@willierebuildz9182]

@@adanrangel7686 yes I have 7.5 on both my cars hardtop is factory posi good luck with your build👍

[@jnasiatka85]

Links?

[@lajames5067]

What headers that is

[@willierebuildz9182]

Holley hooker headers might be hard to find now I think Holley discontinued them