DiY LS SWAP FUEL SYSTEM INSTALL

how i did the fuel system on the 95 obs ls swap
• 95 Silverado obs 5.3 4...
instagram:
the_ls_swap_gur...
If you would like to support or donate to this channel
$CASH APP: THELSSWAPGURU
Try Cash App using my code and we’ll each get $5! BDMKCPN
cash.me/app/BDMKCPN
PAYPAL: [e-mail]
If you would like a build done right by Dr Ru himself here in LAS VEGAS NV you can reach me by email [e-mail]
The Ls Swap Guru Bringing Old SkooLs Back To Life One Swap At A Time
#ooowwweee

[@ceneb3731]

Where the link for yhe cash app....say it in the video....paypal...???? 💵💶💷💸💰💰💲💲💳💳

[@TheLsSwapGuru]

WOW thats crazy your the first to ask or say anything about it...its in the description below thanks for watching and commenting even if you dont send anything just the thought is amazing i greatly ppreciate it bruh

[@luisurrutia7344]

@@TheLsSwapGuru I'm putting a 5.7 litter on my 1984 Buick regal they told me that I need to put some stronger springs in the front and I don't know which one to buy can u tell me I appreciate it.

[@dado8117]

Luis Urrutia Someone lied to you carnal. Your suspension can handle it. The ls is lighter than a small block

[@TheLsSwapGuru]

Someone show did 💯

[@cor6broo]

Don't put yourself down bro, you are the man! Gained knowledge is just as valuable as trained knowledge.

[@TheLsSwapGuru]

Thanks bruh appreciate the support different struggles with every car but learning more and more is the biggest gift thanks for watching

[@MrFuchew]

only intelligent people recognize their shortcomings. It's the idiots that think they walk on water

[@claudeseide9209]

Thanks for the great info. Can you provide a link to the kit you used ?

[@claudeseide9209]

Thanks for the info. Can you provide links to the kit you used ?

[@hardball107]

Nice job Guru, I've done a half dozen myself and most times I use the Corvette regulator/filter, plumb it to the stock fuel rail and use a regulator block off plate to eliminate the stock regulator on the fuel rail. I've also been returning the fuel to the gas filler neck if there was no fitting in the tank, saves having to pull the tank. My latest swap had a low pressure electric pump to feed a carb so I installed a Fitech Force Fuel tank with the internal hi pressure pump. It really works great because it circulates the fuel through the pump tank and returns it to the regular gas tank so the fuel doesn't heat up. I also use hardline for supply and return most times using the stock plumbing and just cutting it off where I need it but there are many ways to do this and as long as it doesn't leak it's all good.

[@dboy3535]

Hell yea I needed this video I'm starting my 5.3 swap this weekend. My g force crossmember just came in. Corvette regulator came with the motor.

[@TheLsSwapGuru]

Aww good glad i can help thanks for watching

[@juliusstephens2959]

I wouldn't follow anybody else when it comes to LS swaps I learned a lot from you bro saving myself some money as well

[@EarnstT20963]

I doing an LA swap on 96 4x4 starting this weekend. You have some good info! Thanks for sharing!

[@TheDuck8679]

Everytime I feel like giving up on my swap I come back to your videos to show myself it's not rocket science. Hopefully by next month I'll have her on the road!

[@502beezy]

Dope bro keep them vids coming I see you putting in that work

[@sergeantscumbag2116]

FINALLY a video clear as day to understand thank you!!!!!!!!

[@TheLsSwapGuru]

Thanks for watching appreciate the love

[@j.williams4030]

Hey thanks bro I didn’t know that Corvette filter/regulator setup even existed, that will greatly simplify my Cutlass swap. I like your style. Thanks again!

[@TheLsSwapGuru]

Much love glad I could help

[@cartelmendoza8244]

Super helpful video bra!! I literally followed it step by step nd it made things so much easier 🙏❤️🔥🔥

[@chevyDboyMike]

I been watching since at least three years ago, and this channel has definitely come a long way.

[@suzukis501]

Looking for videos to help me do the fuel lines on my Cressida and came across this video. It's 2/26/23. Thanks for the knowledge Sir. And glad to see your still doing it. Just subscribed.

[@TheLsSwapGuru]

Thanks champ much love and respect welcome to the family 💪🏾

[@Dante-Abraham]

Thanks so much for this video really helped me out on my 74 Nova LS Swap project!

[@TheLsSwapGuru]

Much love champ

[@blackrockbrewing5141]

I don't even know what you're talking about, I just learned a lot from you, and I'm a pretty good mechanic myself. Thanks for the info!

[@itsraheem]

my guy you are killing the game with these projects, I need to learn how to swap systems.

[@appliancedude63]

Thanks for sharing Brother. I needed this info.

[@TheFireshadow32]

Thanks for the video. Getting ready to do an LS swap on a 77 C10.

[@bignip2000]

Thanks for sharing bro. I was wondering how to get it done. I was just gonna install a tank and with a fuel sending unit and fuel pump. Then run the fuel lines from each side to the filter up to the rails and hole shit don’t catch on fire. Thanks for clarification bro.

[@datdude_jcole9275]

Hey bro I preciate you taking the time to put this out for us.

[@TheLsSwapGuru]

Much love champ thanks for watching

[@cozythunder1]

Great video! Getting ready to do this and this helps me out bunches! Thanks for posting!

[@TheLsSwapGuru]

Anytime champ be sure to sub for more tips

[@rickg-funk3144]

I love the way you explain shit!! Brings it to my level. Some guys on KZbin get too technical lmao keeping it real

[@TheLsSwapGuru]

Lmao I’m not trying to confuse anyone I just want everyone to understand what I’m saying and get straight to the point 🦾✊🏾

[@rickg-funk3144]

@@TheLsSwapGuru yup! I'm also self taught and doing my first few LS swaps on my 64 impala ss, 63 impala (cousins) and 61 impala convertible. So i be watching your videos for ideas and ways to do things. Much appreciated. Do you have a gofundme or anything like that? I'd like to send you a little something. You won't get rich but I appreciate you bro

[@BLVCKFLAGD]

Very helpful. We ended up doing a similar setup with the corvette filter for our ls swap and it all worked out well.

[@TheLsSwapGuru]

Thank you I’m glad I could help

[@emilioaceves5359]

With this corvette filter what kind of fuel pump we neec to run?

[@TheLsSwapGuru]

No more then a 255

[@williammendez6654]

What year corvette is that filter from?

[@stephenjordan9830]

Thank you bro, needed this video today

[@TheTexxxan]

Sweet. I appreciate the effort and information. Thank you.

[@TheLsSwapGuru]

Thanks I’ll be doing a new one soon thanks for watching

[@SlyderGangTv]

💪🏾💪🏾💪🏾 just saved my life brother, you a real one 💯💯

[@youngestson6537]

OG. He ain't doing no short stoppin. He coming full force on they ass.👍🏽💯✌🏾💪🏾

[@realistmw]

I think og slang ❄🌨⛄

[@thicketbomb]

Hey thanks for the little rundown, nice work. Doing the same job on my A-body.

[@briandrmoreau3710]

Gm or mopar?

[@thicketbomb]

@@briandrmoreau3710 all A bodies need LS swaps. mine is a Malibu.

[@zboithegreatakathetruth2373]

Really good video's good looking out very helpful I'm about to ls swap 86 mc but I'm Trying to be Cal legal Any pointers will be greatly appreciated thank you big dog. One more thing do you think getting a whole donor car is better or collecting the parts for the ls swap? I plan on going ls1

[@ericspurlock7775]

Good work brother for one man to another man keep on doing what you doing man we'll be in touch

[@TheLsSwapGuru]

Means a lot appreciate you and respect

[@shadetreerestorations9053]

Thanks for info about to start my swap. What headers are those they look like they fit really good? Did u have to do and modification to them to make them fit?

[@767dag]

Like how CLEAN IT IS !!!

[@TheLsSwapGuru]

Much love and respect

[@brendanmaher58]

I’m so hurt that I didn’t see this video before I got all crazy with my set up this woulda saved me so much hassle lol

[@TheLsSwapGuru]

It’s all good bruh you know now so you got it for the next build thanks for watching 🤘🏾

[@Gorillahousesteve]

Quick question. Is this regulator/ filter all i need? Does this replace the existing fuel pump completely?

[@onefasthorse89]

You’re good people man! Love the video

[@806rebelracingwesttexas8]

Bad ass thx for the vid I’m a new subscriber, keep up the good work!

[@TheLsSwapGuru]

Thanks for watching appreciate your love and support 🦾

[@806rebelracingwesttexas8]

Anytime thanks for the help!

[@806rebelracingwesttexas8]

What size hose did you use and is it rated for flex fuel?

[@xozindustries7451]

Cool video man, thanx for the advise

[@dreko_tv]

Appreciate this bro getting ready to ls my 82 Lesabre Coupe

[@jacksonduval4995]

Ain't that front wheel drive?

[@dreko_tv]

Jackson Duval lol nah they started in the 90s with fwd and beside mines is a 307 v8 it’s the regal little brother

[@tom5989]

I couldn’t find any comments and I don’t know if I missed it. Where did you get the filter and AN kit from?

[@sarblade]

Awesome vid thanks. I like your motor mounts too, where’d ya get them from?

[@jerimainewright3486]

Awesome info Bro Thank You

[@TheLsSwapGuru]

Nothing to it but to do it thanks for watching

[@rustyjunk9008]

Thanks mam! Explained what I was wondering.

[@TheLsSwapGuru]

Thanks for watching

[@fernandoaviles4144]

Thanks for the video very useful . 1 cuestion whit that kit fuel sistem . I can use the same tank whit the same sender unit came whit the car or I need to switch it for difernt pump?

[@rics71cam]

So u used a 3/8 hose on your return or 5/16 Di u have the part # plz on the an fitting

[@TheObsBuild]

You got part numbers for the fittings by chance? I was finna buy a fuel line kit but your saving me 150$ love the work

[@adonismoore7938]

Does it matter where you mount the regulator?? And does it have to be grounded? I used it and my pressure is 70 psi with the same 255 pump I even changed the regulator out and same problem 70psi wondering why it works for others and not me mine is up in the front of the car close to the engine running back on the stock return line

[@martysheets6882]

Nice work, very smart.

[@TheLsSwapGuru]

Thanks for the kind words greatly appreciate it

[@danielrogers9270]

Good stuff bro 🤘🏻. I’m doing this on my 88 bagged S10 now. Just dropped in a 4.8

[@cozythunder1]

Great video! Very easy to understand!!

[@TheLsSwapGuru]

Thanks I’ll be making a part 2 with all the links to these parts thanks for watching

[@cozythunder1]

@@TheLsSwapGuru thanks! I'll be looking for it!

[@EarnstT20963]

I use fuel injection clamps. No ridges to cut the hose. They squeeze together as tightening.

[@litgigga]

Guru do the 2 rear lines run to factory gas tank lines that have no fuel pump???

[@kevinaichele1166]

Were can you get them fitting off shelf?. I'm in the Orange county and I'm having trouble finding the.

[@adamcaballero8538]

Thanks for the information bro

[@RL-bu2ln]

Great video did you leave the gas tank sending unit pointing to the right or did you aim the lines to the left where you running the fuel pump?

[@cadejohnson4799]

Dr. Ru thank you

[@harrynutz4550]

Thanks for the video, you answered my questions, thanks again

[@fernypaletas7148]

I have a 2001 sierra it was a v6 swapped to 6.0 from a 2005 sierra and the fuel rails doesn’t have a fuel regulator and I checked the fuel pressure and it’s throwing 100 psi do I need this fuel filter the one you using on the video??

[@josebeltran702]

What size is that an6 fitting that you didn’t explain that Was already installed on the fuel filter that goes to the fuel rail?? Is it a 5/16 or a 5/8? “Male”

[@Backyardbuilds98]

Where can I order all of this ? I already have the filter.and how do you have it running from the tank? Any part numbers for the stuff I need

[@joseb1700]

U nice kid but got a few questions what sending unit u running? 2 what oil pan n motor mounts u running on this build ..?? I’m doing a 85 regal thnx

[@markistimmons2542]

I'm doing an ls swap on a 79 C10 Longbed I'm trying to figure out the best fuel system to run I got a fuel cell to put under the bed of the truck will that Corvette Filter/Regulator work on my application your the dude on those Ls Swaps your very Knowledgeable

[@jrsfunreview8609]

Do you have the part number for the quick disconnect? Thanks

[@romifrentescu871]

What is that wire ground thing on the regulator bracket? Is it necessary?

[@leviparker2589]

Hey, I've done an ls swap in my 82 square body and I have a question, so I've got the original intake on it already has a main fuel line in and a return like right below it, do I still need the return unit that comes with the msd pump

[@andrewybarra2304]

will the filter regulate correctly if I have a 340lph pump?

[@dre83cpt]

Og gone be ready to fire soon

[@irvingbar4569]

Are those fitting supposed to spin when done installing

[@stevencovington9508]

Do you put thread tape on any of your fittings?

[@lparsons6977]

Will this fuel system that you are installing on this G body work on in 2010 L 99 Camaro fuel system

[@beattheiphz7319]

What type of external pump you got to go with it bro?

[@kellypark007]

Will I need that same fuel system In order to by pass the oem system on a fbody

[@ReelBonding333]

Hey do u happened to have a part number or place I can get those fittings I need those for my 84 cutlass 5.3

[@malcolmjohnson6175]

I love your channel dude

[@TheLsSwapGuru]

Thanks really appreciate it 🤘🏾

[@deestaple7000]

Motor clean as hell

[@TheLsSwapGuru]

Thanks bruh appreciate it mayne

[@numbrjuan1936]

What type of sending unit you have in tank? Stock?

[@dwaynewhitaker7577]

Good looking on the fuel system

[@TheLsSwapGuru]

All good bruh enjoy thanks for watching like always

[@dwightemillerjrsworld]

Wish I was In your area. Good info like always!

[@TheLsSwapGuru]

Thanks bruh much love

[@JamesJones-nv9dl]

Bra i watch everything you post

[@devindent8190]

Nice....thats really good info

[@TheLsSwapGuru]

Thanks bruh appreciate it

[@SurvDC]

Great video bro

[@asaparaujo7613]

Where did you get the fuel line kit from? I’m swapping an 89 obs swb, I’ve got the pump and corvette regulator.

[@hardball107]

Just run some 3/8" hard line like brake line. You can get push lock fittings to fit the line or compression fittings to go from the hard line to the -06 JIC. Ebay had the regulators with the fittings as a kit. They have just the fittings also. www.ebay.com/itm/C5-Corvette-Fuel-Filter-Regulator-Fittings-58-PSI-for-LS-swap-ships-free/184249574678?epid=2289488389&hash=item2ae6216516:g:r~IAAOSwheFaspUj:sc:USPSPriority!13031!US!-1

[@803countryboy29052]

What are the part numbers for everything you used?

[@Wayne_omega_cars]

I got 2 LS CARS AND ANOTHER IN THE WORKS AND YOU RUN THROUGH THIS SHIT LIKE NOTHING 💪🏿💪🏿💪🏿💪🏿💯💯💯💯. GURU IS THE RIGHT NAME DOC..😂😂😂

[@TheLsSwapGuru]

Appreciate it mayne there not easy but i try to grind threw it

[@devinlewis614]

Which fuel pump are you using?

[@vagabond3045]

Hey bro can you tell me how you wired up all the fuel pump I got it in tank fuel pump for my seat and I’m running that same filter you got I just need to know how do I wire the power and ground wire just wire it right to my battery or can someone tell me do I need a relay I really need some help this is my first ls swap so give me some help please I got the lm7

[@chrisford9637]

how can I get in contact with you bossman Im digging your page and I just have a couple of questions

[@datboikevy4389]

If I run a carburetor on ls will I still have to update fuel system?

[@davidhoward3239]

Oooh she Nasty lol... good info bro!!!

[@irvingolivissr.3172]

@ The Ls Swap Guru do you have the part number for that black intake cause you said it's a 5.3

[@hardball107]

Fitech and Holley both make them for cathedral and square port LS heads. Displacement makes no difference.

[@thosegrays1]

Is that just a ground wire on the regulator or do you wire it to your fuel pump?

[@zacherykesler8508]

Wooooo i love your channel 🏁👍👀👍🏁

[@TheLsSwapGuru]

Good looking bruh appreciate that means a lot thanks for watching

[@fillmore1267]

What is the best engine trans controller?

[@richardeddings7259]

Have you ever had a problem with running a quarter inch return line I'm doing a G body swap and the return line on the fuel pump is quarter inch. I read on the summit website they recommend three eights inch return line.

[@brandongibson85]

What kind of rubber hose is that that'll hold up to the pressure?

[@trevorstrauss9978]

Can I get information on what headers you are using and mounts

[@rogermckenzie253]

Great info thanks

[@TheLsSwapGuru]

Much love 🦾

[@thisisliving4261]

Do you have a link or part numbers to order all of this? Thanks in advance.

[@badquality4069]

So u just connect the last line to your stock fuel pump?

[@projsc5945]

Dope🔥🔥🔥

[@19rocket53]

NO fuel pump need it with this set up on a 5.3 ls ??