GDP Portal Maintenance | How To | SuperATV

[@elturista73alvarezramirez49]

Can u make a video on how to grease the u-joints on the driveshaft

[@Austin547Smith]

You should always remove your fill plug before your drain plug in case you can’t get the fill plug out then you’ll be screwed with a stripped plug and no oil lol

[@SuperATVMedia]

That's solid advice, thanks for the comment!

[@ss454gm]

How are portals running on roads? I use my sxs at the lake during summer running back roads and down to my boat dock usually running less than 30mph. Then the fall and winter I’ll use it off-road in trails etc

[@SuperATVMedia]

They run pretty well on roads. They aren't made for high speeds, but they can run at higher speeds without issue providing they are properly maintained with the correct oil to keep the gears cool.

[@jayyy2145]

I have the 4inch gen 2 portals. Changed oil today nd used 1 quart for all 4? It says 1/2 quart for each portal but mine started leaking out

[@chrislisotta6884]

What kind of lift are y’all using to jack up the utv?

[@022joshua]

you need to update your capacity listing. My GEN 3 4in portal are at max 1/4 qt per box, not the 1/2qt you suggest.

[@d.chappell1967]

Thanks! Makes me feel better about my 4's because they only took maybe 1/4

[@yilinlee]

what is the drain plug's sizing, 1/2"? Mine needs replacing

[@KnownSender1]

I want portals 😎 😎

[@fomocowboy]

The 4" has a 1/2 quart capacity and the 6" is half that? Strange.

[@timarnett3548]

Do portals come with oil in them from factory ?

[@SuperATVMedia]

No, you will need to purchase oil separately.

[@timarnett3548]

@@SuperATVMedia do you need to adjust shock preload after installing portals ?

[@austinhamby8699]

Is that portal blood?

[@SuperATVMedia]

No. This maintenance video was made before portal blood was even a thing!

[@kennlove350]

WHERES THE BEARING SEAL KIT VIDEO!!!!! SOMETHING SHOWING HOW TO SPLIT THE CASE AND PROPER WAY TO CLEAN INSIDE WHILE ITS SPLIT???????

[@canamdennis6829]

Iam getting a set

[@inkslingordie]

What’s the capacity on the 8” portals

[@TheVenom8343]

What I want to know is, which portals did you guys bolt to the CF Moto on your website? I see the portals in the pictures of the control arms. I want a set for my ZForce but I don't see them listed for it. Even if I had to do a little modification that is fine with me.

[@masonstansberry2625]

Get this guy an answer, I have a zforce 1000 and would love portals

[@TheVenom8343]

@@masonstansberry2625 Yeah really, at least they could answer me!! Whether they tell me to fuck off or we're working on them, just answer me.

[@masonstansberry2625]

@@TheVenom8343 I agree