GE washer agitator doesn't move! FIX

[@NathanScaglione100G]

My ge washer looks absolutely NOTHING like this

[@ChrisFancySuffield]

I have a GE washer that just quit on me today. It making noise like humming but not agitating. In spin drys and empties the water just won’t agitate. Is this the problem?

[@engineeredappliancerepair2752]

Appreciate the value being presented here

[@Gametight601]

How can I pry a stuck drive block?

[@rentmyplace]

MY ge WCXR1070T5WW AGITATOR LOOKS GOOD BUT FIN IS NOT MOVING.WHAT COULD BE WRONG?

[@LeanOnYourRep]

Check to see if it's stripped

[@rawveganfruitarian7290]

Wasnt my issue, but tjanks for future ideas.

[@wendivasquez1001]

How do you take off a coupler that’s really stuck to the shaft?

[@cr2802]

Is there a washer/dryer maker you recommend over others?

[@LeanOnYourRep]

Most Techs dont recommend any Samsung Appliances. Other than that anything over $600 per machine is good Quality.

[@cr2802]

@@LeanOnYourRep Thanks for the info. I was interested in a $500 Roper washer. Think I need top up the budget to at least $600 to get a better quality machine.

[@imlkrsfn]

Find an old whirlpool direct drive in good condition. Those are the best machines.

[@susanajensen5918]

How do you get the agitator out?

[@LeanOnYourRep]

You have to yank it out

[@ddggttyy]

Hello. Do you have a trick to get the block off once you remove the bolt? Mine is stuck and im not sure if there's something else holding it besides the dirt and grit that i can feel when im trying to pull it off. Thank you.

[@ddggttyy]

Also if i pry and hammer on it will i break anything underneath?

[@LtSplatter]

Just keep yanking and rotating and yanking. There's nothing holding it just splined shaft.

[@pennymadison5065]

I have a Ge washer and my agitator couplet is stuck inside of the auger because the screw came off can you please tell me how to remove it Thanks so much in advance

[@lindseypowers7761]

Yeah how do you take that white cover piece off to get the old piece out and the new piece in. You don't show how to take it off before you can put the new piece in there. The video starts after you've already done the only part I need to know how to do lol

[@michaelortiz7879]

My washer fills and drains but when it’s time to agitate you hear no noise. What could that be?

[@DAZNOODLES07]

Parden me, But if I put new Doug's on the agitator and its going back in forth and barley moving in the direction that it's supposed to but it's locking into place, Is that a sign of a bad transmission?

[@DC-zu2jh]

Hero

[@dezarayauday2866]

Could you possibly contact me ? I’ve been trying to fix my washer and watching your videos are working , but I just had some questions