✨ GE Washer Dryer Combo Leaking - What To Check ✨

✨ GE Washer Dryer Combo Leaking - What To Check ✨
Leaking Washer--Worn Out Tub Seal
This video shows step-by-step how to check for a leaking tub seal.
If your tub seal is worn out and leaking it will be necessary to replace the entire tub assembly.
Here’s a great video on how to replace the entire tub assembly: • GE Stackable Washer Le...
Click here to order a new tub assembly: amzn.to/3T05iuI
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
▶️-Subscribe Here: / @quickandeasy5minuteap...
🛠-Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @quickandeasy5minuteap...
💻-Website: www.ScottTheFi...
📖-Like us on Facebook: / scottthefixitguy
🐥 -Follow us on Twitter: / scottthefixitgy
🌎-Instagram: / scottthefixitguy
-👀See our KZbin Channel: / quickandeasy5minuteapp...
🙏-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
🔌-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY"
Need Extra Help with Your Appliance Today - Click Here:asqme.com/@sco...
⚙️-Good Place to Buy Parts: bit.ly/3wD4L5W
🧰-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
- You Can Fix Your Appliance Yourself and Save $$
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 I’d Like To Thank All The Awesome Viewers That Have Supported This Channel By Subscribing or Joining as a Channel Member.
Thank You for Your Very Meaningful Support😊🙏 🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Quick and Easy - 5 Minute Appliance Fixes Do you need More Appliance Repair Direct Help from Me? Visit me at: AsqMe.com@ScottTheFixItGu

[@fasia8250]

This video just saved me a ton of money. Thank you! As a woman that has to do all my own repairs, this was very valuable.

[@QuickAndEasy5MinuteAppliance]

You're welcome!😊👍

[@Thewraith357]

Where is the video for the seal replacement

[@wonfunigrl188]

Can't find your video on fixing the tub seal?????

[@gabrielignacioarana9359]

Dude! You're a life saver! That's the problem we're having right now. I'll watch your next video about the seal tub replacement. Thx!

[@thelovelychristie]

Hi! I’m having this same problem & have the same model. I’ve been putting a plate under until I’m able to fit it. Do you have a video of replacing the tub seal? I tried hunting one down on your page but couldn’t find one.

[@hellbilly1556]

Couldn't find the video on how to replace the seal, do you have one? Thanks for this video I almost just bought a new one, but it seems pretty simple to fix with the help of your video, now I just need to know how to replace it

[@daniellefox8423]

Thank you Scott. That helps me a lot. I bought a plastic tray and put it under it for now. We'll start saving for a new one in the spring. Your response saved me alot of time and agrivation. When my wife gets up I'll have her donate a $20. It's not much but really apreciate your site, keep it up, I'm sure I'll be talking to you about another appliace one day. Austin

[@QuickAndEasy5MinuteAppliance]

Thanks so much Austin👍

[@marc2797]

While the part may be cheap , keep in mind the the Gearcase/Transmission has to be removed to replace it . and in most cases that i have encountered , you cant get the basket out due to corrosion on the Gearcase shaft . So now you have to replace the Gearcase because you have to beat the damn thing out . this repair will normally cost around $500+ , I'll do a video of my next one. coming soon.

[@QuickAndEasy5MinuteAppliance]

Yep, Terrible design. Probably the smartest to replace it when the washer starts to leak.

[@Toooldforthisshite]

thanks for the video, very helpful, now if I knew how to replace the tub seal............

[@JuanRojas-ym1nr]

I like to see how you replace the top seal

[@jorgevencespizzakiller933]

It's the transmission all together.... So it's not really all together....

[@jorgevencespizzakiller933]

The seal is independent

[@jimmygunz6762]

When the water is filling up in mine its hitting the back of the lip. After a couple minutes it starts dripping then pouring from the top right of the lip dripping down towards the ground wire area. Any ideas?

[@Hueyn42]

Where is the seal replacement video

[@QuickAndEasy5MinuteAppliance]

GE says you can’t get to that seal. You need to replace the entire tub assembly.

[@kikijosephs6220]

I have the same unit, 8 yrs old and it was leaking. Repairman said the main bearing is rusted and I was better off getting a new one. I called GE and the part is $125. Service call is $110 non refundable. No way to know what the labor costs until the service call and the GE tech can see the problem. Should I even try to get it repaired or was the first repairman right that it's not worth it to fix? I don't want to pay for repairs only to have it break down elsewhere due to the age of the unit. Then I have to buy a new one anyway.

[@matthewgarland5944]

i ordered a new trans gear case its a problem getting the bugger out soaked in pbblaster for couple days used a proper sized socket to hammer it out ....you just have to give up sealing a wobbly gear case or leaks will happen again its a 100 dollars rather than 350 for the whole assembly but it might be the advised way to go since its all inclusive xcept the mobo yea im working but sounds like the pump will go next its also a finicky machine make sure you have it out of diagnostic mode for things to happen to get a wash done and like its a patient button pusher to get it out of diagnostic mode

[@helloworld1475]

Hi Scott, I have a whirlpool stackable washer dryer. When I turn the machine on, water starts to pour out from the bottom middle from the back. Do you think it could be the seal or something else. Thanks in advance for your help.

[@QuickAndEasy5MinuteAppliance]

Can you send me the model number to : [e-mail]

[@carlossanchez7169]

GREAT VIDEO ! Please make more videos on ge stackables thanks

[@QuickAndEasy5MinuteAppliance]

+Carlos Sanchez Thanks Carlos

[@Act1veSp1n]

What if it's leaking from the top? Like dripping down from the entry point while the device is off?

[@QuickAndEasy5MinuteAppliance]

That means it’s time to replace the inlet fill valves on the back of the washer. They have a small leak which lets water come in even when the machine is unplugged.

[@Act1veSp1n]

@@QuickAndEasy5MinuteAppliance thank you! The machine is brand new(3 months), why would it die like this? Is there a need to limit the pressure in the hoses that are going in? Is there a difference between the hose location (going from the top or going from bottom)

[@raymond5068]

I have same machine but my dryer dont work now it wont get hot please help

[@timzchannel1960]

Aloha, I recently was doing a load and went to the store and when I returned there was a big puddle of water. My washer and dryer combo is fairly new..My apartment recently did a mandatory water pressure test, which shut down the water for a several hours. Do you think this might be the machine or the building maintenance . There was lots of water on the floor and the nothing in the tub but the clothing is wet. Mahalos for your help and great easy guide for people to understand. I will like and sub ..!

[@QuickAndEasy5MinuteAppliance]

Could be they brought the water pressure up to high and it effected the fill valve. How’s it doing now?

[@timzchannel1960]

I think your right tested a load on normal cycle and no leaks :D Mahalo for the reply!

[@jaivd5156]

Can you tell me if GE detect errors unbalanced load coz I'm scared to use ours now... It's just stop..I only loaded rugs... Pls help.

[@QuickAndEasy5MinuteAppliance]

Try removing the rugs and unplug for 1 hour. They don’t do well at all with rugs.

[@smegadood7880]

back again yea i got it to work for awhile with the new seal and tub nut but after about 10 loads it started leaking right through gear case it was worn out a big gap shaft and bearing rusted out caused a short i got a new gear case but im wondering if im missing a washer or seal not a lot of protection for the shaft moving ....like were does the foam seal go and order of washers ???? like i got the gear case the seal is on it already ive got two washers two orings no foam seal yet wonder if i needed that but this one the main seal is underneath the tub ?

[@jodydeniseneely5597]

I see mine is the tub bearing and that has cause the transmission to go bad. We have taken it apart from the washer, but no matter how much we try including hitting the transmission shaft. It refusing to come out. We have sprayed wd40 and still nothing. Any ideas on how to get that shaft to unseat? Where is the next tubseal video?

[@QuickAndEasy5MinuteAppliance]

The next step is to order the new tub assembly. They don’t make them to be separated .

[@Gladd87]

Ever make a vid on showing how to replace that?

[@QuickAndEasy5MinuteAppliance]

You have to replace the entire tub assembly.

[@bellerealista3562]

Hi, we have the same stackable GE washer dryer, I just want to know if your washer is making this loud noise during spin cycle? coz ours does, and I don't know if it's normal or what? Thanks!

[@1234juandaniel]

You guys might have a small leaking dripping on the belt that spins it causing it to slip before it catches and starts spinning

[@jorgevencespizzakiller933]

It's the bearing and the seal. They are broken . You'll need special tool though for the tub removal . A repairman will charge between 300-400$ because I'm a repair man haha . But yeah good luck !

[@brianwilliams2921]

@@jorgevencespizzakiller933 where did you get the tool from by chance

[@jorgevencespizzakiller933]

@@brianwilliams2921 it's the transmission tool ..

[@jorgevencespizzakiller933]

@@brianwilliams2921 it comes together as a kit... Otherwise as a repair kit ......

[@sagesmama2248]

Hi my rubber belt at the bottom Cam off I have this exact model I can’t seem to figure out where the rubber belt goes ? Any suggestions or videos on this

[@soapmom426]

I invited satan in my home when I bought this combo.Its one repair after another.Its straight from hell.

[@QuickAndEasy5MinuteAppliance]

I am with you😂😂😂👹👹👹

[@isabellagarcia9067]

Hi mines have lidlock light in red what can i do

[@QuickAndEasy5MinuteAppliance]

Can you try this : GE WASHER DOESN'T SPIN-- Easy FIXkzbin.info/www/bejne/h6bRlqierLClmNU

[@DocZoidberg549]

Where is the follow up video on replacing the seal?

[@QuickAndEasy5MinuteAppliance]

The factory advises to replace the tub and spin basket as 1 unit.

[@DocZoidberg549]

@@QuickAndEasy5MinuteAppliance Disconnect all wires and hoses and take out the entire tub unit? Thanks

[@QuickAndEasy5MinuteAppliance]

Yep👍

[@DocZoidberg549]

@@QuickAndEasy5MinuteAppliance I am not replacing the tub unit. I tore it down and replaced the tub seal. It was a job getting it apart. Thanks for your videos.

[@kyleshepard3144]

Doc Zoidberg how did you get it apart? I’m doing the same right now and can’t get the agitator out

[@daniellefox8423]

Thanks Scott. It is the tub seal on my GE combo GUD24ESSJOWW. Can you dirrect me to the vidio of you replacing that. I can find it on your videos. Id be happy to donate.

[@QuickAndEasy5MinuteAppliance]

Bad engineering. You have to replace the whole tub. Might be time for a new washer.