Today we take the gearbox out of our Lion lathe and find it may need a bit more work than we first thought. Fortunately we're used to that!
Пікірлер: 70
@MyLilMule24 күн бұрын
I think the only person that didn't know how far you were going to disassemble this was you. 😂
@VanoverMachineAndRepair24 күн бұрын
Your right Greg I never learn
@ferrywobma183624 күн бұрын
But that is also the reason why we all watch this series, right?
@MyLilMule24 күн бұрын
@@VanoverMachineAndRepair Hey, if you did, this video would have been a lot shorter and a lot less interesting. 🙂👍🏻
@jasonhull571224 күн бұрын
lol, I was thinking to myself, no way he doesn’t go all the way down. He just doesn’t do those kind of jobs half heartedly. lol 😆
@VanoverMachineAndRepair23 күн бұрын
@@jasonhull5712 true true
@ThePottingShedWorkshop24 күн бұрын
I fully understand the issue of how much editing a channel takes to run, having started one in anger not long ago. Those who dont publish probably dont realise or appreciate how much effort you have put in. So, from me, thank you!
@VanoverMachineAndRepair24 күн бұрын
Really appreciate that you know…
@allenbrown782024 күн бұрын
Like eating a bag of Lays, once you start you can’t stop. The whole time you were tearing it down I am thinking “ I hope he has a parts diagram “ ! Great video. Be Safe!
@VanoverMachineAndRepair24 күн бұрын
So true! Yep I don’t lol
@TheAyrCaveShop23 күн бұрын
Nothing like falling into a rabbit hole... Good to get everything sorted the first time. Nice work 👍
@VanoverMachineAndRepair23 күн бұрын
Thanks 👍
@ADBBuild24 күн бұрын
That banjo bolt fitting for a drain plug is brilliant!
@VanoverMachineAndRepair24 күн бұрын
Yeah it is
@edsmachine9324 күн бұрын
That's alot of work Kyle. I know you are up to the task. Have a great weekend. 👍
@VanoverMachineAndRepair24 күн бұрын
Thanks 👍you too Ed
@ypaulbrown24 күн бұрын
Much Respect to you Kyle for tearing into that gear box.......that was daunting just in the tear down.........Bravo
@VanoverMachineAndRepair24 күн бұрын
Yeah it was thanks
@jasonhull571224 күн бұрын
Wow.. man. I’ve done my share of six speed transmissions, gearboxes and converter output drive units, and many other intricate assemblies with all the e-clips and spacers and drive dogs and idlers and what nots… but this gearbox would give me some serious “ member-a-bilities “ haha. Hats off to you sir. That’s a lot to remember, sequencing of reassembly, what gear goes where, what clip, ring, spacer and seal and.. I’m going to loose some sleep for you on this one. I hope you have a parts diagram and some good section/exploited view diagrams my friend. But, do it right or don’t do it at all right ? 👍🏻👍🏻👍🏻👍🏻👍🏻
@VanoverMachineAndRepair24 күн бұрын
I do not have a diagram but I have this video lol
@johnlee823124 күн бұрын
This looks like a tough one to me. Needs to be done though. Hope it goes back together just the once. Thx for taking us along
@VanoverMachineAndRepair24 күн бұрын
Absolutely
@y0taman24 күн бұрын
Another great video, thank you so much for sharing this journey.
@VanoverMachineAndRepair23 күн бұрын
Absolutely
@ypaulbrown24 күн бұрын
thank you so much Kyle......cheers from Orlando, Paul
@VanoverMachineAndRepair24 күн бұрын
My pleasure!
@bobweiram632124 күн бұрын
Cool! I guess there's still time to slap on a big vinyl graphic of a roaring lion's head on the lathe. 😂
@VanoverMachineAndRepair24 күн бұрын
There is still time
@MikeBaxterABC24 күн бұрын
15:40 This makes the rebuild I did on an od Army Jeep 3 speed transmission, look like restringing a Yo-Yo by comparison!!
@VanoverMachineAndRepair24 күн бұрын
Lol that’s funny
@GGraphixGGraphix7 күн бұрын
Real nice work and shop. Thanks for posting. G
@VanoverMachineAndRepair7 күн бұрын
Thanks for watching!
@richardcorwin182824 күн бұрын
This is YOUR world Kyle and reality is whatever you say it is. 🙂 Thank you for sharing kind sir.
@VanoverMachineAndRepair24 күн бұрын
My pleasure!
@hilltopmachineworks213121 күн бұрын
Hats off to you on this one. Next machine I buy I am dropping it off at your place first for an oil change. LOL! 😀
@VanoverMachineAndRepair21 күн бұрын
lol I’ll have everyone’s machines lol
@wmweekendwarrior116624 күн бұрын
Looking forward to end product, fun to watch the process.
@VanoverMachineAndRepair24 күн бұрын
Thanks me too
@jamesriordan349424 күн бұрын
ambitious, and clearly necessary 🙌
@VanoverMachineAndRepair24 күн бұрын
Indeed
@Fynnuekue24 күн бұрын
That seemed daunting to begin with to terrifying the longer it took. Hopefully it goes back together smoothly.
@VanoverMachineAndRepair24 күн бұрын
Probably have to redo it several times but I’ll get it
@hersch_tool24 күн бұрын
Can you please come to my shop and do my Colchester when you're done? It's pretty beat the EFF up, I think you'll enjoy the challenge. Just thinking of you is all, cause im here for you buddy. 😁
@VanoverMachineAndRepair24 күн бұрын
Sure I appreciate your consideration of me lol
@mitchellgould526922 күн бұрын
The sight glasses are probably a G3/4 thread. they can be bought at MSC. They are a metric diameter with an imperial pitch.
@VanoverMachineAndRepair21 күн бұрын
Metric diameter w imperial thread never heard of that before. You got any more info on that type of thread looks like I got some learning to do.
@MikeBaxterABC24 күн бұрын
1:28 I do not believe I've seen a Banjo Bolt, used for an oil drain before!!
@VanoverMachineAndRepair24 күн бұрын
Me either
@user-vn6hi2bi3g24 күн бұрын
Take no Rorschach test if you want to stay out of an institution, this is out there hope you have good records for correct reassembly. You have great content in part because you are willing to take risks most would eschew! Ray
@VanoverMachineAndRepair24 күн бұрын
Yes indeed
@ramblin_wreck24 күн бұрын
Kyle- I found this on eBay for future. 16mm-48mm male threaded metal air compressor oil level sight glass
@VanoverMachineAndRepair24 күн бұрын
Thank you future sir
@stevechambers916624 күн бұрын
That’s some job not much you won’t take on 👍👍👍👍
@VanoverMachineAndRepair24 күн бұрын
Thanks Steve
@Jerrydmech24 күн бұрын
Sweet!
@VanoverMachineAndRepair24 күн бұрын
Thanks!
@CinemactionFilms24 күн бұрын
Do you rely upon your videos, edited or otherwise, to assist you in reassembly? This one looks like a daunting task. Thanks for sharing this excellent installment.
@VanoverMachineAndRepair24 күн бұрын
Yes I do rely on them for reassembly
@brucethom495720 күн бұрын
I like that you do a thorough job and completely fix stuff. But PLEASE get a couple soft faced hammers and some brass punches! I about have a heart attack when you go after machined parts with that ball peen!
@VanoverMachineAndRepair20 күн бұрын
I got both sometimes I don’t use them
@KD-lq1sr24 күн бұрын
Did you buy your needle scaler that way or is that an attachment for an air hammer?
@VanoverMachineAndRepair24 күн бұрын
I bought it that way. Koki jex 28 I think. It’s a beast
@JarheadCrayonEater24 күн бұрын
What he's saying, kids, is that he's beyond the Event Horizon and we're looking at the black hole from one light month away.
@VanoverMachineAndRepair24 күн бұрын
Definitely
@ironindica734224 күн бұрын
So what you are saying is that the restoration is already completed, and we just have to catch up to the future?
@VanoverMachineAndRepair24 күн бұрын
lol def not completed. Currently it’s being paintings so probably half way. Your probably 30 percent through
@ironindica734224 күн бұрын
@VanoverMachineAndRepair awesome 👌 would be hard to sleep at night knowing it's done already 🤣🤣
@VanoverMachineAndRepair24 күн бұрын
@@ironindica7342 I wish it was lol
@markramsell45424 күн бұрын
19:24 Are you sure it's not going to be a complete tear down? lol