Poco X3 NFC LCD Touch Screen Replacement | X3 Pro | X3

[@mattdeacon1858]

Followed your instructions and it worked perfectly, thank you for posting this

[@DIYGeardo]

You're welcome!

[@Mrkevi123]

Theres a few steps missing. Theres a screw in the middle of the motherboard, you cant lift with out taking it off. At 5:49, on the top next to the camera, dont forget to move the light sensor.

[@kazzagm]

I'm trying to replace my screen. As soon as I place battery back in, the power and volume buttons don't work. It works if i loosely connect it. Any ideas what I'm doing wrong when putting battery back in ?

[@DroSmoke420]

Ur hella right...Lol damn, I wish I saw ur comment before I ended up having to double back a few times until I noticed the same discrepancies...oh well, lol... Much love and respect man

[@sidewindera4]

There is a screw holding the logic board that is not shown in the video

[@oweneastwood3445]

Pin this comment!

[@doghouse010]

if you need to apply heat to the motor in order to take it out, do you need adhesive to reinstall it?

[@rylandduffield5419]

2:29, what is the gold cable you unplugged. My snapped when I opened the rear

[@DIYGeardo]

Fingerprint Sensor plug.05:10 view more

[@ravalentTV]

3:54 for what it's that cable?

[@DIYGeardo]

Antenna

[@enricoatzeni6116]

Thanks for the video! Do I need to change or add new thermal paste? The smartphone seems to have heating issue and after 2 minutes playing music the sound turns off/on repeatedly (2 seconds on, 2 seconds off) while the player and the song still play (no pause). The issue appears also using external speaker through the jack.

[@DIYGeardo]

I do not think, this is something to do with thermal paste.Poco Have some history with heating issues.Most of the time with the board.Don't you have warranty for this device?

[@enricoatzeni6116]

@@DIYGeardo Yes but I think my warranty is gone when I removed those screws :-) Today I'll add some thermal paste, check every socket connection and test it again, I will let you know! Thanks!

[@DIYGeardo]

@@enricoatzeni6116 You mean you had the warranty already?

[@enricoatzeni6116]

@@DIYGeardo I had the warrany, but I broke the screen and the touchpad stopped working, so I replaced. Other two problems appear: the smartphone did not power up (from shutdown or reboot), the fingerprint does not work and all incoming and outgoing calls are being closed after 1 sec. BUT now I finally found that in the new frame was missing the light sensor... I detached the old one from the old frame and now (cross fingers) all works good. You can see it in 6:04: it is the little gold rectangle near the top of the assembly with frame

[@godsinbox]

@@enricoatzeni6116 the missing light sensor is an important find. it needs to be moved across to the new frame. it also the proximity sensor, and out of adjustment causes major problems in a call. it goes to show these guys are just faking a repair by opening and closing the parts, and makes me suspicious that it will never work with the proximity sensor.

[@MrProfesor2031]

Very nice man, let me use to share this video

[@DIYGeardo]

Thanks 🙏

[@jeger.x]

Glass is the part of lcd screen, correct? There's no any option to change just a glass? Thank you very much for your tutorial

[@DIYGeardo]

yeah, it comes as an assembly.Only the glass repairs are possible with very advance technician and tools.

[@jeger.x]

@@DIYGeardo Thank you very much for your answer 🙏

[@AlrshedYhya]

The cable tape in my old screen display is broken, can I fix it or do you recommend buying a new screen display, and thank you a lot ❤️

[@hypnoex5282]

I'm wondering, why are you removing most of the parts? Of course, maybe it's something I don't understand, but I took a look at my local parts store, and there's two types of screens, first is just the display itself, and second is the display along with the frame of the phone..

He totally wasted time by taking off the earphone module and the vibrator motor. These do not have to be taken off to remove the old screen. Also, I didn't know he was going to cheat and just buy a new touchscreen in a frame. It's not the same repair.

[@guiestevesm5]

did it sucessfully! Thanks!

[@baburik]

If you just need to replace the battery - You actually don't need to detouch the camera. it can be lifted ~1cm up with cable still attached allowing you access for de- and reattachment of MB bus and the battery itself.

[@DIYGeardo]

This is the screen repair guide

[@baburik]

@@DIYGeardo I think it still apllies. also another guide shows that the plastic cover around the camera is also detouchable without the need of decoupling the camera buses

[@DIYGeardo]

@@baburik thanks for sharing your feedback.also this is with the frame replacement. So you need to remove the battery. There are always shortcut will appear.

[@baburik]

@@DIYGeardo the battery needs to be removed, sure. I think the camera can stay.

[@tkrfilmmanking3513]

Thanks for the video, I managed do it myself but only issue i have is proximity sensor. I fucked up the original one and aftermarket probably doesnt work or i placed wrong...

[@miguels97]

Thank you so much for the vídeo!!!!

[@DIYGeardo]

Welcome 🙏

[@PilatomahawK]

I managed to get it done by my own!! So proud. Only one issue: I'm experiencing troubles connecting to cellular data, the connection is very unstable and very low speed and sometimes don't detect the sim card. I already tried reboot, clean the sim card and configurate the apn. Any suggestion my friend??

[@DIYGeardo]

Thanks for the message. Have you replaced the screen with the frame? what is this phone model?

[@PilatomahawK]

@@DIYGeardo Hi ✌️Just replaced the screen with no frame. I carefully connected the antenna btw. The model is xiaomi poco x3 nfc. The situation is similar to being in a rural area, far away from 4g signals, sometimes connected to H+, others with symbol ® and ocassionally to 4g but with very low speed. I also put the sim card in the slot #2. Thanks in advance

[@m4sc4r4do3]

Thanks but do I have do dismount every single thing just for screenreplacement?

[@DIYGeardo]

With the frame yes, but without frame you do not have to, but screen removal process is hard.This method is safe and fast.

[@tkrfilmmanking3513]

if you not a profesional always do repair with frame, otherwise you will waste your time and money. I personaly fixed many iphones but android phones screen replacement only is 50/50 for amateur.

[@floris1838]

Do you know where I can buy the screen with frame? On the jstech website linked in your description I can only buy the screen without frame. (The Poco x3 pro Black one)

[@paulmartin3682]

I bought one from AliExpress...it cost £20 including delivery and works perfectly.

[@kenoz765]

aliexpress def

[@mazrahgaming9621]

is the screen is Corning Gorilla Glass 6???

[@DIYGeardo]

Original one is gorilla glass

[@godsinbox]

This isnt an honest video, you havent broken the glue like we have to do, you can clearly see you have practiced this before. all your parts fall out, we have to pry them, that process is stressful. you also failed to mention the light sensor needs to be swapped 6:04. this is also the proximity sensor, not having this working properly has major consequences on call functionality! either the screen goes black during a call, or your ear can press buttons. I am suspicious that the replacement screen is not compatible with the sensor. also the thermal paste needs to be reapplied and is not provided with screen kits. I recommend you do not try this at home unless you are VERY sure it can be done. (I failed with the light sensor, not matter how I tried I could not get it adjusted to work)

[@paulmartin3682]

You failed because you didn't follow the instructions properly. I watched this video and now my phone is in perfect working condition. Happy days!

[@w_weeeios7359]

If I do not remove the old screen glue before installing the new screen, will this affect the new screen after installation?? Will it get weaker?

[@DIYGeardo]

It depends, can’t give 100% answer

[@rickfuryyt9056]

here after throwing my phone at the wall 😂

[@DIYGeardo]

Throwing emmm

[@maypulido2342]

ia the lcd for x3 nfc and x3 pro are same?

[@DIYGeardo]

Without frame is same

[@jhoncarlodelacruz358]

does replacing aftermarket lcd affects the high refresh rate of the phone?

[@DIYGeardo]

Yeah most of the time

[@Monkey_D_Luffy56]

Just wondering, is the ribbon cable for the screen of poco x3 compatible with the poco f3 board?

[@mysttic_04]

Can I use poco x3 pro display module in poco x3

[@rodeopadilla846]

after i removed all the screws in motherboard cover there's two wires attach in cover I don't know how to remove please help

[@bzrk1340]

After replacing the screen, 120hz still working?

[@DIYGeardo]

Depend on the screen version you are replacing with

[@FreddyKamal]

Lcd screens are cheap on internet. The problem is when you get your phone repaired at any shop, they charge you 400% for the price. That's why everyone should learn this skill

[@acearmy9528]

Bro can you please suggest me a best display for the poco x3. I gave my phone to repair but that shop person has inserted a cheap board which dark and every image is dark more saturation.

[@nickpeterson9144]

Sir nag lcd replacement po ako sa x3nfc ko okay nmn yung LCD walng basag or anu. Ang problema ko is hard touch siya hndi siya responsive may chance ba na dmabuti pagkaka lagay ng lcd or mas malaki Chance na LCd yung prob?

[@DIYGeardo]

Most likely the lcd

[@AlirezaA-op4on]

can i use poco x3 pro screen on nfc variant?

[@DIYGeardo]

Just the screen is fine, with frame is not compatible

[@AbdelAbou12]

أخي هل شاشة بوكو اكس 3 ان اف سي بحال نفس شاشة برو.

[@nathandavids6098]

Can you please suggest me a trustable website where i can buy the screen?

[@DIYGeardo]

What is the model you have?

[@nathandavids6098]

@@DIYGeardo sorry i was on the wrong video but it is the X3 GT 5G

[@barkkasbar5539]

hi, after ich replaced my poco x3 Display, it does not turning on. the phone is turning on but the display does not. Please hepl :(

[@williamrevell1578]

I did it no it just turns on and I C poco the it switched to miui then turns off for a second beep and comes back one ! What did I do wrong

[@DIYGeardo]

you did the screen replacement? have you double check all your connections

[@lib5278]

after i changed the screen it keeps rebooting help pls

[@DIYGeardo]

Did you replace it with the frame or without?

[@corbacktoztoz703]

don't understand the photo part has some cable no ?

[@DIYGeardo]

Which phone you have?

[@corbacktoztoz703]

@@DIYGeardo Poco x3 but maybe just need to push and they will take place

[@jcofthesaint]

how much for a lcd replacement for a customer?

[@DIYGeardo]

Your location?

[@jcofthesaint]

@@DIYGeardo Philippines

[@akshay5718]

Bro how mach price

[@francescolaghi933]

Hello, is the Poco X3 NFC display compatible with the Poco X3 Pro?

[@OnixBake]

yes

[@gamer-vl9si]

Parts link?

[@gamer-vl9si]

I can't find it lol

[@paulquito6109]

Pwede po ang screen ng poco x3 pro sa poco x3 nfc lang?

[@DIYGeardo]

Without frame is possible

[@JuanJOrtiz-dl5tx]

X3 NFC and X3 Pro uses the same display?

[@DIYGeardo]

Yea

[@marshallpatilla4502]

is xiaomi poco x3 and poco x3 pro same lcd?

[@evaidemooore7037]

Poco is basically Xiaomi

[@DIYGeardo]

Yes

[@carmalestra]

@@evaidemooore7037 🤣😅

[@worldofnathan7276]

Is it gorilla glass?

[@DIYGeardo]

Yeah, Original one is gorilla glass

[@GreenMan19961]

Not the one with frame I need to see how to replace the screen without frame

[@DIYGeardo]

Will try to make a video like that..Thanks

[@GreenMan19961]

@@DIYGeardo thanks bruhh, cuz my phones screen got jacked a bit

[@DIYGeardo]

@@GreenMan19961 you need to separate it gently otherwise, you will break the screen

[@benitohermano4595]

my phone aint turning on anymore. LMAO

[@benitohermano4595]

NVM the power cable was not attecched properly

[@buckethead420]

NEXT

[@DIYGeardo]

Next..

[@fx8052]

Ок, это слишком сложно 😂

[@selfishbirch]

Plenty unnecessary steps

[@DIYGeardo]

There is a difference with frame and without frame installation.This is with the frame which is more secure and more durability

[@selfishbirch]

​@@DIYGeardo I see. Thanks for clearing this out! I'm not a pro by any means and I guessed it was a normal installation from the title. I see that I was wrong and didn't paid enough attention

[@maximm9580]

U jast replace screen. This video doesn't show, how i should make repair with display without case🤪