Gearwrench 90T Locking Flex Head Ratchet Review. My thoughts after using them exclusively for a week

Gearwrench 90T Locking Flex Head Ratchets: Full Review After Using Them. My thoughts and pros and cons to them.
Thanks for watching ! I truly appreciate each and every view we get on our videos. Your support and comments are truly amazing. You guys that are subscribed, are awesome, thanks for giving us your time to watch the videos.
If you aren’t subscribed to my channel, please subscribe, it doesn’t cost you a single dime !
Follow me on Instagram: KoonTrucking and Diesel Medic we always post interest and funny content plus some cool pics we take of jobs and new tools. TikTok: Koon Trucking
If you are interested in Koon Trucking or Diesel Medic shirts or stickers teespring.com/stores/diesel-m...
Here are some of my favorite links to get some awesome tools and coupon and discount codes to save you some money.
Be sure to check them out (just clicking my link and getting to Amazon helps to support the channel. Even if you don’t buy the item listed, just using my link and then choosing another item will help)
Bolster Bolt Organizer 10% Off use KoonTruck10 boltster.com/?ref=baqhdrdkkss
That code will even work on Amazon amzn.to/3fV9TKI
www.gripty.com code KOON10 for 10% off
www.motivxtools.com use code KOON for 10% off entire order
Olsa Tools: Use the code KOON to save 10% off your purchases rebrand.ly/KOON
OTR Performance a cheap and effective way to clear codes and force a regen. Use this link and reference code: CKoon to save 5% off
otrperformance.com/?ref=claykoon this is a owner ops dream!
Rinse Kit rinsekit.com/?rfsn=4227393.66...
Check out www.vampiretools.com and use the code KOON15 and save 15% off your entire purchase plus free shipping in the Cont. US
LunchEaze luncheaze.com/?refer=68 $5 off purchase
Tribus Tools: bit.ly/2MalUQ0 use code: koontrucking save 5% plus free shipping
Wera Screwdrivers and other awesome German Tools: www.kctoolco.com/?rfsn=293179...
Capri Tools Work Light: 620 Lumens of awesome: www.amazon.com/gp/product/B07...
Tekton 1/4” socket set www.amazon.com/gp/product/B07...
Vampire Tools 8” Extraction Pliers (these things are amazing):
www.amazon.com/gp/product/B00...
Grey Pneumatic Duo-Socket Set Metric Master Set. This is an awesome set can be used on a ratchet or impact!! www.amazon.com/gp/product/B00...
Lang Tools Master Feeler Gauges:
www.amazon.com/gp/product/B00...
Gearwrench Bolt Biter Set 👍🏻 www.amazon.com/gp/product/B07...
OEM Tools Magnetic Rechargeable Light (the battery life is amazing on this light, super bright. My favorite magnetic light)
www.amazon.com/gp/product/B01...
Knipex Cobra Pliers (some of my go to Pliers):
www.amazon.com/gp/product/B00...
Streamlight Stylus Pro Rechargeable Flashlight:
www.amazon.com/gp/product/B00...
I use Tub O Towels to keep all my tools looking nice and clean. Here is the link to them:
www.amazon.com/gp/product/B00...
Gearwrench Brake Reset Tools (Drum Brakes): www.amazon.com/gp/product/B00...
Email: [e-mail]
Koon Trucking
200 Davidson Dr.
Booneville MS 38829

[@davidjlane6103]

First thing I did with my gearwrench ratchets was take it apart and flip the flex lock over. It feels more natural. Now they are like Matco.

[@scottsmrcka2769]

Gearwrench has come a long ways in a short time with a lot of their products.

[@meld1817]

I can't get enough of there stuff

[@leelavinder2231]

Your new lighting is amazing! Great job Clay

[@butler386]

I am liking the soft handle grip more and more. Looks like a great alternative to choose. Thanks for sharing.

[@anthonytsapatsaris5388]

I just ordered the 3/8 comfort grip on Friday can't wait to get it on Wednesday of this week

[@TheTheomax]

I have a Gearwrench 3/8 non locking flex and 24" 1/2dr locking flex that I bought around 4 years ago. I really like them and for the price you get a lot of bang for your buck. Thank you for the fine video.

[@case8309]

Thank you for the honest review I'm looking to upgrade so this helped me a lot.

[@robertmtz2639]

I started off using gearwrench as other tools were expensive and after years of use they don’t disappoint.

[@robwalters9695]

I actually seen a Gearwrench truck the other day out of the blue, never seen one before lol

[@U_ever]

We have one in South Tampa also.

[@CoyleTools]

Those are independent tool guys who have signed on with a program Gearwrench used to have where they wrap your truck in return for buying so much Gearwrench merchandise. It was a good program in its day because they gave the tool guys promotional support, too. But the program is no more, unfortunately. I got into it myself a few years ago and was glad because when you're not flying a franchise flag like Snap-On, Mato, Mac or Cornwell, it gives you some brand recognition.

[@pophamlarry]

I have lots of gearwrench tools I've always had great luck with them.... Another great video Clay....I always come to your videos cause you always give an unbiased review... thank you Clay for all of your advice...👍

[@KoonTrucking]

I appreciate you saying that and thanks for watching !

[@tctwg1]

Thank you Clay for all the videos you put out each week 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸👍👍👍👍👍👍👍

[@brianreese9318]

I had a hard time finding them finally finally found a 1/4 in 84 tooth locking flex head 8 1/2 long all the stores that sell them here in Spokane have to order em no store here shelf stocks but I’m excited to try it out thanks clay seeing this video got me into checking gear wrench out

[@billythemechanic8233]

Good video Clay !! Gearwrench has came a long way

[@cassiuspuckett8789]

Nice video Clay....really got into the design of the ratchet and why they are a good tool to have in your tool box great video Clay......

[@mikey358976]

Old school mechanic here, I've purchased the chrome locking flex head ratchet. And I gotta say the handeling and performance, especially on the locking flex head part, is by far the best locking flex head ratchet I've used. Now I've used the matco, Snap-on, and other popular brands, but this gearwrench locking flex head blows all the other locking brand of flex heads out of the water. My opinion the gearwrench locking flex head is the best choice then the other name brands of locking flex head drive ratchet. Can't wait to order the comfort grip version. Overall great 👍 review.

[@SIG226Y]

Been waitin for this, thanks

[@jimhaines8370]

I have all three sizes of the locking flex 90 tooth ratchets, got them when they first came out and really like them a lot

[@ericluba6287]

I love my gearwrench ratchets I have had a shot of the gearwrench 120xp when it comes down to my 1/2 inch 1 non Flex head I have put that through some serious abuse over the last few years and to be honest I am seriously surprised it's still works as good as new I use it for everything even attaching a pipe to it constantly and it's still going strong

[@mecalpsha4473]

I did like the review I tried the new version, but MATCO 88 ratchet is so refined and smooth and ORANGE for the win! Easiest to see in shpo and love the White Matco box with Orange trim!

[@bobbyw9046]

IMHO Snap-on is rapidly pricing themselves out of the market for the average Mechanic. In years past, the competition was not great and S-O and Mac truly stood way above all the others. Today is a different story! Teckton, Gear Wrench, Milwaukee, and heck even Kobalt are excellent choices all with lifetime warranty's.

[@Rider00769]

I own majority of the Gearwrench ratchets throughout the years. But when it comes to warranty it can time consuming. My 3/8 120xp ratchet warranty took over 6 months from APEX tools. So, I bought the Matco ratchet 88 teeth off the truck warrantied it twice and no issues. In the end, it is the convenience factor you get what you've paid for...

[@derekquinones8614]

Gearwrench just sent me a new ratchet via mail no questions asked

[@836dmar]

It’s crazy how they both had to be warrantied. I’m looking for a ratchet that won’t need to be warrantied.

[@nathanbigsby8731]

@@836dmar Me too, but that tool doesn't exist.

[@thedewdster]

Why not just keep a spare rebuild kit in your box. They're like $10 bucks...

[@thecollector6629]

I just buyv15$ rebuild kits forget apexx warentee

[@MarkK01]

Hey Clay, now that you are done testing them out you can send me the comfort grip handle ones lol. I love my Gear Wrench.

[@jamesford1096]

Can’t say I have any complaints with my Gearwrench ratchets.

[@markkobza8129]

i have two sets of the 84 tooth, im a diesel mech i wi, i love those ratchets, one set is 1/4 3/8 and 1/2 long non locking flex and a stubby 3/8 flex ( my personal favorite) and the other set is a 3/8 and 1/4 long ratchets. had them bout 2 years now and they have been great. i do like the orange, it would go well with the rest of my snp on and matco orange tools ive had since the early 90s when s-o came out with the hard handle orange. i already have the s- o ratchets , and a set of Cornwell 3/8 fine tooth which arent bad, just too thin with out the comfort grip. my old arthritic hands need the larger grip. been doing this since 89. gearwrench is doing a great job with the ratchets and sone other tools that would be great for a starting tech, and its not going to cost payments for the rest 😒 of your working career.

[@CoyleTools]

There are tool trucks that carry the Gearwrench brand, although Gearwrench itself isn't a tool truck franchise company like Snap-On, Matco, Mac and Cornwell. There are even trucks that display the Gearwrench brand from when they had a program for independent tool truck companies that wrapped their trucks in return for buying so much merchandise, called the Street Team Program. Very good review. Nice and thorough.

[@Eggomania86]

That's definitely a lot of ratchet for the money. Definitely worth looking into. Even though Gearwrench produces their products overseas, they do make good quality stuff.

[@SteveFisherTattoos]

I’m hoping I can find some also. Just to see. But I bought my first snap on ratchet yesterday so let’s see

[@danieltubbs458]

"If you are looking for a back-up or a second, third, or fourth, or 151st in your case let's be real haha."

[@rickcarpenter4518]

You can swap the orientation of the locking switch to match your other ratchets. Also, tiny shims under the spring help tighten up the head flex, and a shim on the thread side of the hinge bolt will help eliminate lateral slop.

[@johnp556]

Those comfort grip are nice, want. Have one gear wrench 90 tooth fixed and it's lonely. Gear wrench is great for me, the common man, weekend warrior, I have complete sets of their ratcheting box ends.

[@gregcothrum4045]

Great video have a great day and stay safe 👍

[@bjblanchard1508]

I have the same set but in the 84 tooth and I have no complaints yet

[@prestonfields5968]

Great video man, thanks!

[@zachfinn-dunn9309]

Need to get me a set of these!

[@mecalpsha4473]

*MATCO 88 Ratchets is where it is at!!!!!*

[@timm5970]

The gearwrench is actually a little longer but the matco is a little bit nicer. My experience with gearwrench rachets has been a nightmare but considering how much praise they het i think it may be an isolated incident

[@timm5970]

@imgone it feels like a cheap and cheesy ratchet. It literally broke on me the first day I used it and has continued to break non stop. Every tool has its place, and my 84tooth locking flex head gearwrench's place is the trashcan

[@andybub45]

I can get this set for the price of one Matco… but I agree the Matco is superior.

[@andybub45]

@@timm5970 that’s because yours was an 84 tooth. The 90 tooth is a new version and the quality has improved.

[@mecalpsha4473]

@@timm5970 The handles are clunky and feel of ratchet is clunky (MATCO is slim, handle is nice and way better quality). Snapon ratchets are too big and their screw driver handles need to be slimmed down. Matco screwdrivers handles are better - know they are Witte but still don't like clunky tools - know the Snapon is excellent quality just wish they had a slimmer version. I never use my snapon ratchets the old school ones were wayyyy slimmer.

[@Artiscrafty]

They are great ratchets I GOT A 2 PIECE 1/4 AND 3/8 DRIVE.

[@15Michaeljoseph]

Awesome review, I've been on the fence about these for a while! If you want to getting rid of the non-comfort grip set, I've got a home for them!

[@KoonTrucking]

They will go in one of the trucks.

[@torydaligcon9930]

Hey Clay I woke up special at 3am Hawaii time just to watch your video!!!

[@HelloHello-qs5ny]

Great video

[@oldman3388]

As always a great video nothing wrong with gearwrench they are kinda the new old style craftsman. 25-35 years ago everybody would be at sears looking for new tools and the holy grail new tool catalog and if you were lucky to have a sears hardware store in your town but those days are gone.So now we have the Clay Koon tool review sponsored by SWEET TEA.🔧🔧🔧🔧

[@claytonscheiber3493]

I'm really considering these. I'm kinda holding out till these are available individually. I want a 3/8 and eventually a 1/2.

[@claytonscheiber3493]

@Jon Doe It is a locking flex head. Even 60 bucks would be doable.

[@djmark7766]

I like your channel like the products you being out

[@KoonTrucking]

I appreciate that!

[@theratedrtransformer8890]

I just bought the 4 set flex head and the 24 inch locking flex head

[@haroldberwanger3298]

The comfort grip is on Amazon for around $150 for a set look up gearwrench 90 t set

[@antilaw9911]

I love gearwrench products!

[@AMckentuck]

Would you choose the gearwrench locking flex head comfort grip over the carlyle locking flex head with comfort grip? I get great service from my local napa i know mileage varies from store to store. I don't have tool trucks visit me because i am a diy'er but i do purchase decent tools. Tekton , carlyle, exc...

[@johnb1121]

I don't have a matco truck near me close 1 may be an hour away Hello Gearwrench...

[@larryl2682]

I guess I have to add this set to my at home tool box 😂

[@FAMOUSSLICKRICK]

Me to my friend. 😎

[@Dotz155]

What's your top 3 ratchets clay? I know Matco is your favorite but I dont have a dealer. Just online, snap on or mac? One guy said Carlyle even?

[@juanhernandez1238215]

Hi there good video, do u happen to have the part or items number of that gearwrench flex head 90 t with the handle grip ? I tried to look for it in amazon but I only found the 3/8 , and 1/4 “ set but no luck with the 1/2 “ in it , only found a set of 2 instead of the 3

[@747rotate]

Who really cares where they're made at or what country. If it works for you & you like your product then in the end that's all that matters. I have a Gearwrench non locking 3/8 drive ratchet comfort grip & I like it just as much as my Snap-on ratchet's. Very nice build & quality.

[@Glewisme]

Clay how are they in comparison to the Matco locking flex head ratchet?

[@anthonythompson4110]

Love your reviews. You seem to give any brand a fair shake.

[@thecollector6629]

I had to go to eth the huskey watentee if far better its its the same ratchet exceotc100p vs 90 orc120 witch test stronger

[@chriswilliams1595]

UK in there cool video thanks

[@deltahawk1001]

The 84 tooth were superior to the 120XP, and the 90 tooth is an upgrade to the 84 tooth. Now I just have to figure out if that hideous orange stripe can be removed...

[@Alanthe918mobilemechanic]

I use to hate comfort grip but clay converted me.

[@donwendling7800]

I have the GW flex non locking version.

[@johnb1121]

My Snap-on flocking flex has the same play in the head I'm ok with that...

[@blue_oval5553]

GEARWRENCH Tools are hands down the latest game changer in the Auto Service Tech industry,Guys in the industry no longer have to give their entire paycheck to those over inflated Tool truck vendors to have reasonably priced quality tools in their hands. Good job GEARWRENCH!!!

[@brianreese9318]

Everyone is showing the gearwrenchs grip is cool

[@quiksol]

You should add a amazon link in your video description to both styles.

[@bbqguy6538]

What's item # on comfort grip

[@myles6026]

Clay don't think of the switch as being backwards look at it like this. Righty Tighty Lefty Loosey. Right is locked Left is unlocked.

[@bobbark9345]

FINALLY shipped from Amazon after long weeks! ETA :soon! You sold me another one dangit Clay!

[@bobbark9345]

Finally got here today! Grips feel great super comfortable design. Locks are nice and tight

[@FAMOUSSLICKRICK]

That's Awesome!!! I want to order one too. I have the 120xp in 3/8 drive with comfort grip and 1/4 drive with comfort grip and the full chrome none comfort grip 1/2 drive. They are Awesome too. How is your 90t working so far my friend? 😎

[@bobbark9345]

Rick Ellison great ! I love them! saved pulling the radiator to get to some recessed power steering pump bolts through the pulls with the thin head design !!

[@FAMOUSSLICKRICK]

@@bobbark9345 , Yes Sir, I know exactly what you mean. I wished my pops and I had these ratchets back in the days. They save so much time getting into tight spaces and angle bolts. I love them. I also want to get the new extra large Gearwrench 90t 24 inch long 1/2 drive with comfort grip too. Amazon has too. $119.00. 😎

[@davidwalle5025]

Good review. Review the icon, i am using an icon, pittsburgh and texton for comparison. So far the texton is number 1 and icon is number 3. The pittsburgh is out doing the icon, smoother. and fits better.

[@KoonTrucking]

I have reviewed the icon and we also tested it on the torque meter. I have several videos on it. First look video kzbin.info/www/bejne/hqGqg2ZmgtOehZI Torque test video head to head vs snap on kzbin.info/www/bejne/faPGoaCgYtuSpLs Final review and thoughts video kzbin.info/www/bejne/e4DJe41rrNR3rdE

[@michaspi]

Thanks for the review, Clay. What kind of mechanism engages with the flex detents? Is it a ball bearing with a spring or more of a “flat bar” detent like Tekton uses?

[@KoonTrucking]

It has a bar that locks between the the teeth in the bottom of the head

[@michaspi]

Koon Trucking Excellent news, that means there won’t be a groove worn into those slots like with a ball bearing. Thank you for the reply, Clay!

[@thecollector6629]

Are matco and gearwrench the same ratchets

[@bradfaught1695]

What does made in the usa really mean? Well in the case of the matco it means the metal for the rachet handle is usa sourced and assembled in the usa. Does it mean the whole rachet is American made? No it does not. They could still use some imported parts i.e. selector switch and locking switch and it would still considered made in the usa since the cost of those parts is miniscule compared to the cost of the manufacturing. Now I'm not saying that they due import their selector or locking switch I'm just saying it wouldn't effect the made in the usa badging. I'd still recommend buying American rachets while you can, but I have been impressed with some of the gearwrench stuff. Just recently they had alot of stuff on sale through amazon. I picked up their mids and a 3 piece locking extensions. Try them out if you get the chance to.

[@altonbarbee8864]

I just bought a set of silver eagle ratchets from my matco dealer because my problem is not breaking ratchets but losing them. I Can't see paying 200 bucks for a ratchet and leaving it under a hood or something.

[@wrenches8896]

These would be great for someone who's starting out in the trade. Or even just the weekend warriors who like fixing thier own stuff.

[@chryslertechnician3439]

If you can’t get to a Matco truck gear wrench is the next best

[@SpartanA31xx]

Wonder when they will introduce different comfort grip handles.... I need my green!

[@larryborkstrom3580]

The whole line of Gearwrench is great for a starting tech or a DIY there are much better alternative to HF even with that icon line they came out with I got some Gearwrench prouduct in my box not afraid or embarrassed to use them

[@AG-rk5hj]

Do you recommend the gearwrench over the Icon ratchets?

[@larryborkstrom3580]

@@AG-rk5hj yes

[@timm5970]

My 3/8gearwrench 84 tooth felt cheesy and fell apart on me. Literally had issues since day one. My icon long reach flex head has been killer. I have a 3/8 icon i had to take back because the head was locking up. If i was to do it again id go with the 90t comfort grip in the video but the icon wrenches are very nice although i have found some of their products to have defects. With that said i just had to take them back in and get a new one hassle free using my phone number.

[@larryborkstrom3580]

Looks in I'm trolled by harbor garbage bear again sorry Jeff your the reason I won't spend a cent in there ever again

[@timm5970]

@@larryborkstrom3580 I have both ratchets. My gearwrench is currently in pieces/broken which has been a regular thing since I bought it. My icon is still trucking along amazingly since ive bought it

[@frankthespank]

I just tighten the hell out of the screw on my flex head ratchets so it’s very hard to move, lol

[@bobbyw9046]

Nice review. Considering the fact that I know you are a S-O man at heart, they seem pretty good and they are probably a small fraction of the cost. Another great alternative to S-O would be Teckton - also make great tools. I only have a few Teckton's but they are really great at 15% of the S-O cost.

[@emroatanathach2165]

How are the matco vs the gear wrench as far as the thin-ness or slimness. Been thinking about the matco wrench ever since you brought it up. And if you had to choose, gear wrench or matco?

[@KoonTrucking]

Honestly it all boils down to if you have a Matco dealer or not. Or if he is a good dealer or not. All tool truck tools are only as good as the man that sells them to you. Both are good ratchets there are some differences in them but there’s nothing wrong with the Gearwrench at all.

[@emroatanathach2165]

The matco truck don’t stop by my way even when I had asked. So I’ve been ordering online. Can you do a side by side comparison video between the 2? I know you love the matco ratchets. Just I would have to order both of them just to compare. And thanks for the reply! Love your videos!

[@MuffyThePomeranian]

do you know if the 3/8s head will fit on the 1/4 inch body?

[@jimhaines8370]

No they don’t have that size anvil yet but they need to get that in the line up

[@KoonTrucking]

No it will not fit

[@donaldhollums3278]

That’s great of Gearwrench to send you those ratchet sets for your professional review. So, what’s the next step? Maybe come up with a contest to give one set away as a prize...hint...hint?😁 NAPA seems big on offering a lot of Gearwrench hand tools.

[@6548ww]

Is it just me or do the Gearwrench locking flexhead look very similar to the Matco Brand? other than the lock button locking in the opposite direction they look identical including the soft grip handle design I am very interested in the Gearwrench set now was wanting the Matco set but kinda leaning towards the Gearwrench set at this point and will save a little money too

[@KoonTrucking]

We compared them on the Matco truck. Took them apart and showed the internals

[@KoonTrucking]

kzbin.info/www/bejne/pmnVe3qsmcZ5bdk

[@6548ww]

@@KoonTrucking OK thx watching it now

[@johnb1121]

Plus I have a lot of snap on rachet an I just think there over price as well as there sockets for someone to take...

[@johnb1121]

@Flat Bastard Engineering Channel Snap-on sockets an rachets are over price for some 2 just take...

[@daveN2MXX]

Nice video! I wonder how these compare to the gearwrench 84t locking flex head? Worth upgrading?

[@KoonTrucking]

No clue ? I don’t have any 84T all i have are the 90 and 120xp

[@jimhaines8370]

I have been told that the 84 tooth will be replaced by 90 tooth at some point as far as use and strength the design is very close but supposedly the 90 tooth is a little stronger. The head thickness is about the same as the 84 tooth, the 120 tooth ratchets have a thicker head

[@joshdane5657]

@@jimhaines8370 yea I heard they was going to replace the 84t with the 90t also which kinda sux bc i love the 84t locking flex head and like the red handle better than the newer 90t hopefully I can get an 84t even cheaper now tho lol

[@jimhaines8370]

Matco was part of Danaher which had lots of brands made here and imported like Gearwrench. Matco was so when they split and Apex was formed and I’m sure Apex kept patents as Matco was spun off to a different holding company. Matco went to AJ manufacturing to have ratchets done after flood at Sumpter SC plant and poor machinery condition from lack of upkeep led to discontinuing of US production. There was a year when Matco could not get ratchets or parts. That is when Armstrong/ Allen/ KD/ and other US brands where discontinued sadly as there where all made by Danaher / Apex so they went away. Back when Danaher owned and made all the brands Gearwrench 84 Matco Armstong 88 ratchets could all use the same repair kit so they were very close to the same.

[@daveN2MXX]

Thanks guys! I own a set of the 84t locking flex head amd I was wondering if there is a reason to upgrade...sounds like no need to upgrade for me. I love these ratchets, and gearwrench cust service was super responsive when I needed a new O-ring...they sent me the whole rebuild kit with no questions asked!

[@jedwout7510]

Looking at different company than tekton and sunex. Best tools I've owned so far. Gearwrench seems like a good option thanks for the information. Check out tektons website if you make an account they have free shipping I believe and 10% back to put towards later purchases

[@danieltubbs458]

I've text Joe several times do you mind reminding him about my Streamlight. Thanks Clay

[@KoonTrucking]

You just have to stay on him. Joe is old school and slow to technology. Just text him

[@JohnB-zu5pr]

Big question is warranty??? Try to get a hold of someone at gearwrench good luck.

[@KoonTrucking]

I’ve heard it is super easy send and email and they send you the tool ? Haven’t personally done it but several people have talked about how great the warranty process is with Gearwrench. I think it was send a pic of it and that’s all ?

[@jimhaines8370]

Clay is correct go to GearWrench.com and they have a warranty page which works fantastic, just fill out form and upload photo and they send out tool or parts right away no hassle at all

[@AdriftAndAtPeace323]

Insanely easy! Send a pic and they ship out a replacement within a few days

[@daveN2MXX]

I completed the gearwrench website form to request a new o-ring and they sent me the rebuild kit within a week....no questions asked!

[@andybub45]

It used to be really bad, I think they have improved because Tekton was stealing their customers due to a better warranty.

[@MrSupernova111]

Great video man! Its like watching tool porn! lol. But in all seriousness, I just bought the 90T set without the rubber handle and I can't wait to use them.

[@KoonTrucking]

Thank you for watching

[@kevinragsdale6256]

I have a 120xp set I got on a price error off amazon for $40 for all 3, and the chrome is weak/soft on them.

[@beardedtoolreviews7185]

Would you recommend gearwrench 84t or 90t ratchets??

[@KoonTrucking]

I prefer the 90t even more than the 120xp

[@beardedtoolreviews7185]

@@KoonTrucking cool. Thanks

[@johnb1121]

But snap on wrenches worth every dollar except for gearwrench box wrench also have snap on one still think gearwrench does it better...

[@majorahole]

No item numbers in the description or the video?

[@KoonTrucking]

Really no need in item numbers since they only make a hard handle and soft grip version in 1/4”, 3/8” and 1/2” Google will put you right on it

[@scuba422123]

clay does k d own gear wrench i have snap on they ere so good but an arm and leg cost how was the icon i have a gift card

[@KoonTrucking]

I’m pretty sure Apex owns Gearwrench. I honestly haven’t used the ICON in a LONG time. Mine is the one that was recalled, and i never took it back. Since I got the Matco ratchets they have been what I have used up until this video when I used only these for a week.

[@AdriftAndAtPeace323]

Kd is gearwrench, apex bought them in 2014 and added their entire tool line to gearwrench. You can warranty old kd tools and receive a gearwrench replacement

[@25centsapop]

Gearwrench is becoming a tool truck brand, and the prices are getting to reflect that

[@prestonschilling3730]

Doesn't gearwrench make these ratchets for matco?

[@KoonTrucking]

Nope they are different. Look back at last week’s video and we show the insides of them both side by side

[@prestonschilling3730]

I'll have to watch it. Thanks for the input. I've heard people compare them but I've never seen a side by side video.

[@KoonTrucking]

Matco is made in USA in Illinois

[@rickyringeljr6057]

Don't let wall use it Because he doesn't know how to use a locking Fleck?

[@claytonscheiber3493]

1st!

[@KoonTrucking]

Quick !!

[@BuiltOverBot]

not doing a week with the non sissy grip?

[@KoonTrucking]

I like the comfort grip the best. Nothing is different in the working of the ratchets.

[@KoonTrucking]

Yup ! By far

[@BuiltOverBot]

I am still trying to resist the sissy grip ratchets.

[@BuiltOverBot]

@Flat Bastard Engineering Channel never would have figured a mechanic could have soft hands sissy grip or no sissy grip.... I just like giving clay a hard time I might have a sissy grip ratchet if they made them 30 years ago when I was buying them.

[@scottyee707]

wish they had other colors

[@travisrader648]

I've always liked snap on ratchets till I used a Matco wouldn't have anything but Matco now

[@Dotz155]

I have a snap on dealer and mac dealer what's the 2nd best ratchet if you cant get matco?

[@christopheryoung826]

Personally Marco gw then snapon for me.

[@doctordiesel5467]

What's the big deal its the same locking body and handle design as on the 120xp and on the 84 design

[@ytromu]

It's Man-Jewelry.