Gemini Junior Unboxing Video + First Impressions! Was it money well spent?

Turns out that even if you set up your sandwich wrong, you STILL get a great cut! Who knew? In this video I will unbox my new Gemini Junior die cutting machine, cut a few things and give you my first impressions. I even completely botch a die cutting sandwich, so hopefully that will make you feel better about life in general. Do you have an electronic die cutting machine? Let me know in the comments below!
Check out Jennifer's video wherein she sets up a super plate and breaks all the rules: • Preventing Gemini Die ...
Note: this machine was purchased by me! I did not get it as a freebie and had been wanting one for a while. Long story short: I'm happy with the addition to my craft/dining room! I think my wrists will be happier, too!
Like that nail polish on my hands? Check out JJ from Olive & June: oliveandjune.kk2kau.net/1q3o9
Connect with me on Instagram: / czdesign
Subscribe to my newsletter: bit.ly/cznewslettersubscribe
Follow me on Facebook: / cathyzielskedesign
⭐️⭐️ S U P P L I E S ⭐️⭐️
• Gemini Junior Die Cutting Machine
--- ldli.co/e/o0ok51 [ SimonSaysStamp ]
• You Are Loved Wafer Die
--- ldli.co/e/ln4d2p [ SimonSaysStamp ]
• Hero Arts Fancy Die Snowflake Cover Plate
--- ldli.co/e/xdk39d [ SimonSaysStamp ]
• Tim Holtz Tonic Craft Pick
--- ldli.co/e/1l7xo7 [ SimonSaysStamp ]
• Spellbinders Platinum 6 Die Cutting Machine
--- ldli.co/e/gd7e0n [ SimonSaysStamp ]
Product list made with LinkDeli - linkdeli.com/e/m9ey7d
Affiliate links are used in the description above at no additional cost to you. I receive a small percent of compensation when you click through and shop using the provided links. This helps me to directly support my KZbin channel and my small business. Thank you!
#geminijunior

[@jennifermcguireink]

I adore you!!!

[@bethjeans3780]

Jennifer McGuire Ink thank you... oh wait, someone else. ;)

[@ProfCardmaker]

@@bethjeans3780 hahahahaha

[@teresasanner-fecto3690]

That is so cool... I'm so excited for you. And it's purple... my all time favorite color. I hope it makes die cutting a lot easier for you! 💜

[@czdesign]

And I think it's obvious how I feel about you.

[@alicespringer8781]

Cathy iv been wanting to get one iv got a few machine but my arthritis in mu hands ✋ are working with my machine so hopefully if i get jr machine hopefully i will enjoy crafts again ty , u are awesome.

[@jennifermcguireink]

you can do shim side done or clear plate side down on top of the back of the die. Just ALWAYS cut into that single plate.

[@MariaNyceDesigns]

When Cathy showed the picture of you with the angelic chorus, I was like, hey, that’s what I see & hear when I say Jennifer McGuire too!!! You’re such an angel, love ya!!!

[@kathycresswell8353]

@@MariaNyceDesigns Actually, I think of Jennifer as a crafting ICON! After all these years she still amazes me!

[@MariaNyceDesigns]

Kathy Cresswell I completely agree!!! She’s an amazing person & craftsperson, I hope she realizes how blessed she is & how much she has blessed us with her knowledge, creativity & experience!!! I would love to meet her when it’s safe to be able to hug again!!! I really want to give her a hug, she’s such a sweetheart!!!

[@wendyrobbins6339]

Go buy a lazy susan for it, even the Wilton cake one from Michael's works great. That way you can spin it and feed through better. It's really handy.

[@jennyk6598]

😲 Thank you so very much for the idea!! This is a game changer even for my other machines.

[@wendyrobbins6339]

Yup, it's very helpful, especially when you're doing many pieces.

[@lynnlohne6578]

That is an AWESOME idea!!

[@julies.6271]

Wendy Robbins What a fantastic idea, in my work space I have to get up and go around to get the plate out....this is GENIUS!!!!

[@czdesign]

Smart idea!

[@Cards4Cancer]

I have the big Mama Gemini and it cuts so beautifully. Your reaction was about the same as mine the first time. I didn't realize the noise level, but I am just not strong enough to crank some of those things through manually, so the trade off is worth it. The only time it's annoying is if I am in production mode. Very happy for you Cathy. I too obey everything out of Jennifer McGuire's mouth. XO

[@shorton4413]

I have the big mama one too. I feel like only a few of us do because of the size. But I don't regret it. It is really nice being able to cut bigger things and also to fit more things on a plate, especially if you're doing multiple cover dies!

[@robynneighbour5196]

Me 3 with big toy. Yes it is noisy as well Cathy Zielske

[@shelleyrubenstein9420]

I love my Gemini too! I got it as a birthday present from my kids and it’s truly one of the best gifts I’ve ever gotten. Jennifer’s tip for the diy cutting plate works great and keeps your plates flat as long as you keep rotating them. Enjoy!

[@kimgrimes632]

Oh you got it- watching you open now!

[@kityac9810]

I love my Gemini Jr.!! For me, it was for my back, and old memories, instead of my wrists. The crank on the manual diecutters were like those old school ice cream makers that gave me nightmares as a kid. Even after all of these years, I'm at a loss as to how I always got stuck with the job of turning it. I still get an eye twitch when I see rock salt.

[@czdesign]

My hubby hates the sound of the hand crank!

[@KimberlyOnnen]

Thank you for the "laugh out loud" on the eye twitch!!!

[@sejones156]

I love my Gemini Jr. also. One tip to make you plates last longer is to use an olfa 5 x 7 rotary mat to cut into( vs the plastic shim)and it saves your cutting plates and helps with warping. Happy die cutting!

[@dragonflygrandma]

good to know.....thanks

[@jesusatan3020]

yes Jennifer got it right with plates!!! she rocks!

[@kraftykat4381]

Welcome to the Gemini club.. you will never look back.. I have a special edition purple one (favourite colour) and live about 20minutes from the CC head office in the UK. Just need to work out how to get a job there!

[@wendymerchant6998]

Hi---Where can I get the cutting plates for both the regular LARGE and the JR Gemini's? What are the part numbers? I need the entire sets of plates. HSN does NOT have them and neither does their Corona facility in California, USA. I have been trying everything I know to find these---HELP if u can---THANKS!

[@kraftykat4381]

Wendy Merchant cutting plates are available at crafters companion’s website, they definitely ship to the us. Simon says stamp list them but I didn’t check stock, they should be pretty wide spread as they are in the uk.

[@lynngregory2336]

Try eBay. There are more suppliers in there. Just be sure they are genuine plates and not compatible ones which don't always fit.

[@sherriejohnson9250]

@@wendymerchant6998 They are available from quite a few sources. I just checked after seeing your post: Simon Says Stamp, Crafters Companion, Scrapbook.com, Ellen Huston.com, Walmart.com, Amazon, and HSN has them in stock. And yes...there are several stores on ebay that have them...but like someone stated...be sure they are genuine Gemini plates.

[@gayle1055]

Oh no now you really convinced me. Your such an enabler. Unfortunately I have to be extra good as I was hospitalized for 3 weeks and the sweet people I worked for let me go before I was even discharged for being sick!!! And I was on an FMLA too. So I in a few weeks I will be 65 figured I might as well sign up for Medicare and Social Security. I probably will have to find a part time job to make ends meet. I’m a nurse so I started scouting some jobs. Well enough of that. Your so right about Jennifer McGuire she is the sweetest kindest person and love her ideas they are amazing. Thanks for the reveal Cathy. I also have horrible arthritis in my hands. Those intricate cuts were amazing.

[@bronwyn117]

Best die cut machine ever! Money well spent!

[@kathryneddy5172]

Love my Gemini Jr!!! You're not the only one that has a hard time remembering to turn the die the right way up/down (?). ;-D Love the tribute to Jennifer.

[@MariaNyceDesigns]

Oh this is such a game changer! I had carpal tunnel for years, I had my left wrist (since I ’m a lefty) taken care of 3 years ago, it helped a ton, but, having an electronic die cutting machine is one of the best decisions you’ll make Cathy!!! Enjoy!!! Oh, yes, it’s really loud, it sounds like it’s eating porcelain dishes for a quick snack!!! You may have to get the regular Gemini for larger dies, I have both, 54 & half year old wrists like mine needed the upgrade! Stay well, love ya!!!

[@kerriegood1046]

Cathy- this is my very first comment on KZbin. Thanks to Jennifer McGuire's blog I just made the decision to spend the money and get a Gemini Jr. Too. I watched Jennifer's video and have already ordered the self healing mat. The plates do bend quicker than with the older machines. I like the new mat. I am really enjoying the new machine, so much more of the stamping world is full of dies these days. Both you and Jennifer are fantastic and I love looking for your videos. Thanks for keeping us up on the stamping world and bringing a humor to our world.

[@czdesign]

Hey Kerrie! Glad you commented here today! Enjoy and come back often!

[@jewelboykins8887]

I love hearing you give Jennifer props!

[@czdesign]

She has taught me SO much about cards. I adore her personally as well!

[@lootseepanganiban-lustan278]

Congratulations, you’ve made the perfect decision. Jennifer rocks with simplifying our plate sandwiches. Both of you rock for uniquely different reasons. Yeah!!!👍👏

[@czdesign]

I trust her! She tells me what to do. I do it.

[@pamelasertich9850]

You will love the Gemini Jr! Love Jennifer's sandwich tool

[@czdesign]

I love it so much already!

[@lonyamathys7131]

That first impression in a new plate is always heartbreaking. lol The Gemini Junior is on my wish list so I will be watching.

[@galelamanilao8313]

Love, love my gemini jr! It’s my workhorse. I’ve had for at least 2 years now. So much power for an electronic machine. Have fun using your new machine!

[@czdesign]

Good to know!

[@terriannvalentino8826]

Soon to be merry Christmas to me! Thanks for sharing Cathy.

[@katyglenn9271]

I received one for Christmas last year. It took me awhile to get the cutting plates right but after watching Jennifer McGuire and her sandwich tutorial, I'm not having any problems. It is quite noisy! I love it but I also love my Big Shot. Stay Safe and healthy!

[@nicoleengland9223]

I did enjoy it, giggle every time I watch one of your videos. Thank you for enabling me in my crafting supply addiction😘

[@midnightcrafter1618]

Cool! This is going in my birthday wishlist. Thank you for the review!

[@Ecabezas]

I have the Gemini and the Gemini Jr....best crafty purchases I’ve ever made! My die cutting is super fast and easy. I have joint pains also thanks to computer working so it makes them a plus in my book. I have extra plates but I’m still using my original plates. Just keep rotating and all will be fine. Wait til you start using double-sided dies!!!!! (FYI...you’ll need special plates for those but they aren’t expensive)

[@lyndavitamanti1141]

I’ve had my Gemini for about a year and I love it.

[@112seedsoflight]

I just bought my Gemini Jr. a month ago and love it. YES, the sound is normal - mine is loud too. That part about trusting Jennifer with your life was hilarious! I love your videos!

[@kathygroff4526]

Welcome to the club, Cathy! Gemini Club, that is. I’ve really had great use of mine for over a year now. I’ve never used the other brand you have though. Thanks for sharing, I was happy that mine also had some included dies. 💌

[@missyleftrick5525]

So awesome!! I have this on my list of “I WANTS” 😀

[@donnawalker3910]

After years of frustration with die cutting I saw a tip to place the metal die cutting side up and the paper on top because the pressure comes from above not below. That has made a world of difference as far as my experience with die cutting.

[@czdesign]

So die faces up.Paper goes on top, right?

[@donnawalker3910]

Yep, that’s what has worked for me especially with the really detailed dies.

[@karenk4874]

Donna Walker I do the same and it does not damage any of my plates!

[@Cards4Cancer]

You are putting clear plate, die face up, paper, cutting plate and then metal shim? Just trying to clarify. I got rid of my cutting plate and use a piece of self healing craft mat. It goes where cutting plate goes with metal shim attached. It works fantastic and no having to get new die cut plates. I've used it solid over a year with no difference in the surface.

[@karenk4874]

@@Cards4Cancer I put the clear plate, die face up, paper, self healing mat and clear plate. I have not had to purchase any clear plates for about 8 months now and if you use a good self healing mat, it will also last for a long time without warping. I don't have had the need to use the metal shims.

[@moeboe2]

Always enjoy your videos. So entertaining. You make me chuckle every time. 💜

[@czdesign]

I try. I really do!

[@themaddscrapper-mayradalla6354]

Hi Kathy! I am a new follower and I LOVE your videos. I own the Platinum too, but it's my shoulder that keeps me from using it regularly, it just flat out hurts it. But it IS AWESOME. I have the full size Gemini and scored the Gemini Junior on clearance at Hobby Lobby for $51. YES! I LOVE THEM BOTH!!! I do use the sandwich configuration that Jennifer McGuire suggested and have yet to break out my metal shim. What I have found is that there are times when her configuration does not work, such as with 3D embossing folders, so a loose set of plates comes in handy. So yes, I have 2 sets of plates for my Gemini Junior. I just bought the second set on Amazon. THANK YOU so much for sharing all you do! I look out for notifications for your videos!

[@cynthiahess7477]

After a long exhausting day at work, you bring JOY. I love your videos and sense of humor. Thank you! 😊

[@czdesign]

I'm so glad!

[@kristikortman5443]

I have had my Gemini Jr. for about a year and love it. I wasn't planning on buying it, but my local Joann store had it on clearance for $97 and it was brand-new, so I made the splurge. The cutting sounds I heard on your video are normal. I need to rewatch Jennifer's video, because I must have made my sandwich wrong and I had terrible warping of all my plates -- but they still work, which is awesome. I also have had ergonomic issues with hand-crank machines when I am doing a lot of cutting (awful knots in my shoulder), so it was worth it just for that.

[@at2515]

Fantastic!! Thanks for showing and thanks for being delightful, funny you!!!

[@czdesign]

You are so welcome!

[@27Tammie]

Congratulations on your new Gemini Jr. Cathy! I love mine and have to use it more. Ha I love you enthusiasm and your fun personality! I you make me smile.😁

[@czdesign]

Thank you so much!

[@ambermyer7411]

Thank you for sharing this, I’m needing to buy an electric die cutter, I like how this one cuts.

[@lisaheld439]

Thank you for this. I bought a Gemini jr months ago and have not unboxed it’s yet!! Procrastination in action. You’ve inspired me to open it today and see what I have inside.

[@ginamcdonald7854]

After watching your video and seeing how easily this cut intricate dies it makes me consider this purchase a little more seriously! Love all of your videos!

[@beaborsato5209]

Thanks for the demo! I received one for Christmas and excited to get started on my Gemini junior

[@czdesign]

Hope you enjoy it!

[@mck9496]

I love the moment of homage to Jennifer McGuire! This looks like a wonderful machine--so happy you have it.

[@czdesign]

I worked on that one for a while! lol! I wanted her to smile!

[@channellingmartha1209]

Cathy you are that piece of sunshine that I need in my life right now and I thank you for that. Don’t stop being you. I love your fresh and honest approach, your love of Jennifer and willingness to try new things. You make me laugh, inspire me and I cannot thank you enough. 🥰❤️

[@czdesign]

Wow, thank you

[@vickimontemayor3262]

Just tried out my Gemini! I did a ornate frame without magnetic shim but used embossing shim. 😵 Duh. I did find magnetic shim and tried SPOOKY! Success. I'm so excited i want to cut and emboss all night long. Next i tried Jennifer's sandwich and a 2nd success! Now that im a pro I'll start doing die cutting and embossing for a living.🤗 Now i know how you felt. Best thing I've learned in a yr. Of course its been sitting next to my craft table intimidating me for 9 months. I'm 71 so maybe I'm slow to try new things. NOT. Lol. Thanks for your going first. Yay. This 👵 is rocking it!💜

[@czdesign]

Enjoy!

[@dandmpug]

How did you know I was lovin' your nail color from the beginning??! Another fun, enjoyable CZ video - just so you know, you could unbox a can opener and I'd watch, Cathy! You always seem to come along with a new video just when I need a smile, so thanks. Btw, I don't know why, but you make me chuckle every time you say "craft slash dining room"!

[@czdesign]

Oh thank you!

[@msremech]

I love my gemini jr. I too have hand numbness and neck issues. You will love it to and the reverse is a game changer!!

[@mariancopticcrafter]

Your die cutting will change forever😊 I have the big gemini but sometimes use the junior plates with it for faster cutting. I love everything about it. I used to avoid die cutting till I got it! Enjoy 😉

[@dawncooksley3497]

I have the Vagabond 2 and totally love it...I keep one clear plate for cutting as well...

[@barbaramatthews4556]

You are not alone in feeling love for Jennifer but I also feel love for you. I had the electric big shot and loved it until it died with my die in it (pun intended) and it was quite difficult to get my die out. Now I have the Spellbinders platinum, the big boy, and love it. Hope you have many years of die cutting joy. Jennifer does a voice over so you don't hear how loud the machine is.

[@czdesign]

Barbara yes, I realized with all the videos I've watched and Jennifer using that machine that she's doing voice over and you don't hear the actual sounds and then I was like, doh!

[@tracystern5780]

I love your videos. You always make me smile. I can't wait to get my gemini jr.

[@czdesign]

Have fun!

[@DebadooCreates]

You will love it sooooooo much!!! I bought the Big Mama Gemini when it was first released in the states through HSN quite a number of years ago. Then life happened and I had to sell it to some friends, but was finally able to get a Gemini Junior almost three years ago now. I still have my big shot and will likely never part with it, but due to arthritis and issues with my wrists the Gemini Junior is just so much easier and the way that Sara's Dad engineered the rollers to add pressure where it was needed the cuts are amazing. When you see Sara demonstrate it, when it's finished cutting she takes the die with the paper in it, and just kind of whacks it on the side of a trash can a few times, and pretty much all the pieces fall out. It's amazing. I only have tiny collapsible trash bin in My Craft Space, but I keep saying I'm going to try that with the big trash can one of these days just to see if it works. LOL yes they are noisy which surprised me, but I'm fine with that. I've not seen anyone unbox one yet regardless of where they got it that didn't have the extra dies, and an embossing folder. Not always the same ones but they all got extra goodies

[@estherquintana9534]

Im like you I have bad wrists from work so now I know what to get when they go completely thanks Cathy!

[@barbarachmura2695]

Yesterday I went shopping at Hobby Lobby and the Gemini Juniors were reduced at their Clearance Sale. I paid $51.99 which I thought was a great deal. Lucky Day!!

[@KimberlyOnnen]

WOW! That's an awesome price!!

[@mackiemadepapercreations]

Barbara Chmura Wow!!!

[@marykayross8817]

Wow! I paid $139 at Hobby Lobby for mine. Your price was a steal!!!!!

[@jeanninesheeser5422]

A steal!!! Lucky lady!!!

[@debbystewart4554]

Lucky! My Hobby Lobby Doesn’t carry them. 😩😩

[@pennyrau6615]

Love your videos. I want a gemini jr now

[@marykayross8817]

After hand cranking for many years my husband gave me a Vagabond. I adore it and am now on my 2nd one. I have a Gemini Jr., as well, and love it, too, but I'm always trying to figure out that sandwich. Whichever one I use at the time, I wouldn't trade them for another hand crank ever!!!! I'm spoiled! Have fun with yours.

[@czdesign]

Thanks for sharing!

[@katerockett2071]

I’ve had the Gemini Junior since they released it and I love it! I definitely think the cutting plates have been changed though, because my original set are still going strong and they haven’t warped. I see a lot more complaints about the newer plates. Enjoy playing Cathy ☺️

[@TheresaJollyLee]

I have the full-size Gemini - love being able to put a full sheet of paper in and run it through without trimming down. The Gemini cuts through intricate dies like butter. I don’t use it for everything, just because sometimes it’s faster to run something through my manual machine. But if I have a lot of cutting to do, or if I’m using some intricate dies, the Gemini can’t be beat. I also do the taping together of the plates like Jennifer recommends - makes it so much easier. Enjoy your new toy!

[@bethholt2245]

I just purchased the platinum 6 and it’s great but I too have wrist pain and have been considering the Gemini junior. Thanks for the great video!

[@fionnawheatley9095]

I have rheumatoid arthritis and my wrists play up. I went for the couture creations go power and emboss instead of the Gemini. Reasons: 1 noise, 2. Cuts steel rule dies 3. Plates last for ages 4. Everything you need is included in the box and it cuts up to 9 inches wide. 5.... there was a 5, but I can’t remember what it was...probably price point and reliability. Having said that I’m not sure you can purchase it in the us. 6. All really delicate cuts cut with one pass. Oh yeah...coordinates perfectly with the go press and foil!

[@TheKlh54]

I am so happy you made this unboxing and demo video.. i have the older pink/red? Spellbinders manual die cutter and have begun to experience similar issues to yours (hands and wrists) i need a new machine but have not been able to decide which I want! Gahhh!!! This is helpful... the video, not the exasperation!😃

[@DCANOTXZ]

Wow great, I’m planning to get one myself but I’m not sure yet as I have my eye in another one as well. But thank you for making this video.

[@78Kimberli]

Omg! Subscribed! What a joy to watch💕

[@czdesign]

Thanks for subbing!

[@pennyklie7530]

Welcome to the "I love my Gemini' club... bought mine about a year ago and rarely use my other machine. I too use the Jennifer McGuire DIY Cutting Plates method and have less warping. I do feel that when I use the metal shim my plate warps so I have been using a piece of cardstock instead when needed. Congrats and Happy Die Cutting!

[@Cards4Cancer]

You might want to try cutting a self healing cutting mat the size of your plate. I exchanged this for my cutting plate and never have to replace them. I do use a good clear thick self healing mat however. I've used it over a yr with no change.

[@kathleenbingham4433]

I purchased the larger one and love it! I had an old cuttlebug and always had problems with cutting. The large plates let me use larger dies and/or cut more things at once.

[@carolestrawn8755]

I was so happy to see this. I'm getting ready to purchase a Gemini Jr. and just needed some reassurance before I spent all that money. Your videos are always so real. I knew you would "tell it like it is." Next to go watch Jennifer's video.

[@czdesign]

Wonderful!

[@mackiemadepapercreations]

Love my Gemini Jr! I like you, have arthritis in my hands! Now you will get frustrated with how fast the plates warp.But....I don’t care!!! And yes mine is loud!

[@czdesign]

Good to know!

[@laurasteingiser8876]

Cathy, I bought the full size Gemini to mass produce my daughter's wedding invitations last year. It was a gate fold 5 x 7 with a split tree die that made the whole tree when closed, so I needed something that could handle paper that was 7 x 10. It worked beautifully. These machines also cut through heavier items like felt and leather, I believe. It is noisy but worth it.

[@cindyellis765]

Hi, Kathy. I feel your pain with the old house and lack of power outlets. Our house was built in 1890 and never upgraded. We’re lucky to have one power outlet per room. Yeesh! I saw that you purchased the Gemini and waited to see how you like it. You always give us the honest scoop.

[@czdesign]

1890? wow! So you DO get it! lol!

[@leeconradi8918]

I got it because of my arthritis and the intricate dies I have from Tonic, I made the plate sandwich like Jennifer suggested (that rule breaker!) and will see what happens. Keep us posted Cathy! TYVM.

[@haribelle4531]

I want one! Been seriously considering ordering this.

[@divyaruth3563]

I have a plan to get one too! Thanks for the video

[@raleysmombaker9593]

I did that the first time too. My Junior is the largest machine I have at this time. I place dies like this on a slight diagonal and then run it through twice if I have to. The crunching is pretty loud isn't it. I keep mine on a bookshelf until I want to use it. My favorite part about the sandwich is I no longer have to remember what goes where because sometimes it's a long time between uses. My nickname is Two Second Cindy so it's really helpful to me and my memory. I started with the Gemini Go and boy did that magnetic shim seriously stretch and then it split in two places but I still used it. When the sandwich video came out I bought all new plates for it too and I love it even more now. Have fun with it.

[@lindylund280]

Feel the same about Jennifer MacGuire. Such a good teacher and such great ideas. This should help your wrists.

[@monicaschalk4951]

I got the Gemini Jr for my birthday, but haven't taken of out of the box yet. Now, is the time. I had just seen Jennifer's video on the GJ (yes, she is the BEST) before asking for it. Thank you Cathy for the smiles and your reaction to the Gemini. Happy diecutting!!

[@czdesign]

Hope you enjoy it!

[@ginapeyton567]

Congrats on your GJ, you will never need anything else. Yes the sound is normal. Have fun! Hugs, Gina P.

[@czdesign]

Thank you so much!

[@danaparker3628]

I just bought one last month and I love it. I did my plates per Jennifer Maguire recommendation.

[@christinesheppard5759]

Yes, it’s loud. And it makes cracking and smashing sounds that make you think you’re breaking it. All normal. You will love it.

[@pjjosephgiss]

Thanks so much for your video. I love them all. Been eyeing the Gemini Jr and wanted a real review. I am convinced! And don't we all LOVE Jennifer Mcguire💜💜🙌🏾

[@czdesign]

We do! She has been my go to resource ever since I started making cards.

[@theoregonduckfan]

I love all the Gemini products and especially my die cutting machines.

[@karenmarie2282]

Love the Gemini Jr! It is pretty scary at times putting things through, but will have to try Jennifer’s sandwich method!

[@doggiegrammie]

I have had my Gemini Jr for several years and love it. The loud sound and the cracking are normal sounds. I do use the McGuire sandwich. I have had to replace my plates a few times but I think that is just a normal thing. I also bought the I Craft cutting plate that Jennifer recommended but I haven't tried it out yet.

[@deborahm.2460]

McGuire sandwich - love that term!

[@kawanagreen680]

Yep, love mine. Use that metal shimonoseki intricate cuts

[@BeverlyLeeCreates]

This was so good! Lol you crack me up! And yes I have the Gemini the Gemini jr and the Gemini go! I use them all

[@czdesign]

The best!

[@juliez1539]

Thank you for doing a review of the Gemini Jr, Cathy! It gave me the confidence to purchase one, and I received it last night. I quite like it! I will be following Jennifer McGuire’s sandwich ideas and I will be buying different products for some of the shims and plates. I didn’t think that the noise it makes is too loud, maybe because you warned us about it.

[@czdesign]

Hope you enjoy it!

[@arleneplastine5462]

I love my Gemini Junior!! I have had no problems with warped cutting plates because I rotate all my plates after each use. I'm still using the original cutting plates that came with my machine 1 1/2 years ago. I love, love this little work horse. My wrists were not helping me much before I got this great machine. Keep rotating and you'll have no problems!

[@czdesign]

Good to know!

[@lisagardner1644]

This is the best “extravaganza” I’ve seen in a long time! 😜 You’re awesome!

[@czdesign]

Wow, thanks!

[@adelleemery6424]

Raise your hand if you were waiting for Cathy to use it and react to the sound? I'm dying (6:21 ). The first time I used mine, my honey yelled from the other room, "Who is bulldozing asphalt in here?" I said, "get used to it!" LOL.

[@czdesign]

hahaha

[@anikamercier2651]

So super help! I was always curious if it’s loud.

[@cherylbartlo8277]

I have the original Gemini and the Gemini Go and love them both. Hope you enjoy yours, Cathy!

[@czdesign]

Thank you! Will do!

[@jodibarnett6383]

Yes, that’s the noise mine makes. I love my Gemini Jr!

[@czdesign]

Whew! I think i didn't expect it because when I watched Jennifer's clip, it was voice over and not live sound. Lol!

[@shirleypryor9397]

The Gemini junior was my first cutting machine. I love it. I too follow Jennifer McGuire tip. I also purchased the platinum 6 to use with my Spellbinders glimmer foiling.

[@czdesign]

I have that Spellbinders Glimmer Plate… i have only dabbled! It's on my list for the holidays!

[@smartburgher1]

Hi I have received one as an early birthday present and it sure beats hand-cranking my Bigshot!

[@patriciakoepp9874]

I bought my Gemini Jr and was trying it out a few days later and used the wrong sandwich for the 3D embossing folder. It stopped in the middle and made a terrible noise. (I surely thought I broke it). I tried to cut something and it didn’t even leave an impression on the paper, Little did I realize that the Gemini plates are thicker than standard plates! After a few tears I figured that out, works like a dream, love it

[@Kimmcdougalcrafter]

YOU WILL LOVE IT Cathy!!! I got it to save my wrists and shoulders! I'm OLD! LOL and I love this machine!!! I bought some extra frosted shims, cutting plates and magnetic shims to keep on hand! Jennifer's video was so good about the sandwiches!!

[@czdesign]

I did just place an order for extras to have on hand!

[@Kimmcdougalcrafter]

@@czdesign Good job! Another tip for you is when you die cut, place your dies in different areas on the magnetic shim so that it won't warp your plates in the center. I also do what Jennifer suggests of flipping the top cutting plate every time I die cut. Have fun!!!

[@maritakasley1931]

I have a Gemini Jr. too and love it!! I do more die cutting now than I did with my manual machine. I tried Jennifer's sandwich with the I Craft cutting plate but my new cutting plate and the I Craft plate came out of the machine horribly warped. I have better luck with the other sandwich she suggested. I do need new cutting plates and I'm having a hard time finding them. Still I would never go back to a manual machine ever. Hope you enjoy your machine as much as I do mine.

[@catherinestrong4470]

I have one and love it. I use it as instructed. I do love jennifer configuration i will look it up

[@Melanie_CraftMama]

Your videos make me smile. Thank you Cathy! AND I love the ode to Jennifer McGuire that you had in the beginning. :) The Gemini machine series is a bit loud, with the Gemini having a lower rumble and the gemini jr having a higher pitched noise. I think it's totally normal. I switched to electronic die cutting machines after I had my kids and started dealing with wrist and carpal tunnel issues. I love them and they have saved my wrists. Take care and have fun!!

[@mariafernandez6537]

Yes the sound is normal! I have the big one (Christmas present) and I do love it. However, I use my manual machine more.

[@Monica---]

Oh Cathy, I can tell you that making mistakes is part of the game and ALL of us have made them (on this machine and others.) When you use this machine often, you will probably cut into your magnetic shim a time or two - even though you know what to do! It still works; it hurts you more than it hurts the shim. Yes, I've been using the Gemini Jr for more than a year and it's fabulous. I was starting to experience wrist issues with the crank on my Big Shot (a time or two the crank snapped back and got me when I wasn't careful) when I made the decision to purchase the Gemini. You're going to love it (despite the noise it makes.) The setback is avoiding using the machine late at night due to the noise it makes (or cringe and hold your breath, hoping you're not disturbing anyone like when making an early morning smoothie. 😉) My only "tip" is I bought extra shims so that I could keep my sandwich taped (like Jennifer suggested) because you have a different sandwich configuration when using an embossing folder. I can't wait to see more videos and how you feel about your investment. Luv you! ❤😊

[@patriciacornelius1588]

Hope you enjoy it!!!

[@julies.6271]

I have had mine for a year and I LOVE it!!! I mass produce my Christmas Cards and that alone has made it worth the cost!!!