✂️ Gemini Jr Die Cut Machine Review | How to use the Gemini Junior | Electric Cutting Machine Review

• Gemini Jr Die Cut Machine Review | How to use the Gemini Junior | Electric Cutting Machine Review
Everything you need to know! What do I HONESTLY think of this machine and will I be keeping it? I'll also show you a fantastic DIY Gemini Junior Cutting Plate Sandwich. How to cut dies with the Gemini Jr & How to emboss with the Gemini Jr.
Jennifer McGuire Video Mentioned: • Preventing Gemini Die ...
🔗Links:
🤗 Join/Support my channel for perks: bit.ly/3unA6cd
📢 My Website: myinkiefingers.com/
🛍️ Shop with me: bit.ly/2CFlkVn
📘 Facebook Group: bit.ly/2NE2WSW
📘 Facebook Page: bit.ly/3csKGWf
🎨 Stampin' Up! LIVE Online Classes: bit.ly/304DhsZ
👭 Join My Team: myinkiefingers.com/join-my-team/
📽️ WANT MORE VIDEOS? - Our Inkie Life KZbin Channel: bit.ly/3n7VH4q
Social Media Links
💬 Come say Hi! - bit.ly/myinkiefingers
(All my Social Media links in one place)
Likes & Comments
📢 Thank You very much for liking and commenting on my video. Not only does your feedback and 'likes' help me determine which videos you like the best, it truly does help my channel. So again, thank you 💗
Supplies & Shopping
🛒 Shop with me: bit.ly/368wOP4
As an Amazon Associate, I earn from qualifying purchases worldwide at no additional cost to you.
--- S U P P L I E S ---
• My Favorite Supplies
--- kit.co/MyInkieFingers
• Gemini Junior Die Cutting Machine
--- geni.us/B3mpNk
• Artistic Dies (155371)
--- ldli.co/e/07pe47l [ stampinup.ca ]
• Pretty Flowers Embossing Folder (155428)
--- ldli.co/e/43kmy35 [ stampinup.ca ]
• Seashells 3D Embossing Folder (154309)
--- ldli.co/e/262m369 [ stampinup.ca ]
• Gemini Jr Magnetic Shim
--- ldli.co/e/5yrl4yk [ shareasale-analytics.com ]
• Gemini Plastic Shim - White
--- ldli.co/e/3opm3og [ geni.us ]
• Cricut Tools, Basic Set
--- ldli.co/e/m5m134m [ geni.us ]
• Take Your Pick (144107)
--- ldli.co/e/e2kpeo2 [ stampinup.ca ]
• Big Boss - Stampin' Cut & Emboss Machine (149653)
--- ldli.co/e/3opm3lj [ stampinup.ca ]
⚠️ DISCLAIMER & PRIVACY POLICY: bit.ly/3wX8RHo
🎵 --Music--
Epidemic Sound: Queens And Kings (Instrumental Version) - Alexander Bergil
Sound FX: Epidemic Sound
Try Epidemic Sound for free - bit.ly/2UsnBLW (Referral Link) Thank You!

[@_MyInkieFingers]

Arg!! Sorry about the Audio. But tell me, what are your thoughts on the Gemini Junior now? is it on your wishlist or are you passing on it? 😁💗

[@Freespiritarts]

Well this is on my Christmas list now!

[@dorothyjohnson253]

Buying it! I love my Spellbinders 6, but I use it so much and it can become kind of tiresome after hour or so! I will still use it for a dies that are easy to cut, but I will use my Gemini Jr. for those CC THICK! embossing folders, which warp in the Spellbinders 6. It's always a tradeoff with crafting!

[@violetolson6512]

Good presentation on the Gemni

[@donnajuchtzer576]

Very informative, thank you for taking the time to test everything out for us to see. Very much appreciated.

[@_MyInkieFingers]

You got it Donna! 😉❤️

[@anniethompson9207]

Love Love..perfect way of comparing from Stamping-up to Gemini Jr..👍👍

[@anaraposo522]

Wow I absolutely loved the Gemini, I think that will be my next embossing machine. Thank you for sharing.

[@_MyInkieFingers]

I'm so happy you enjoyed the video! Even with the tinny audio! 🔉🔉😂😂❤️

[@judyprather]

Thank you for this outstanding video. I have had this machine for a couple of years and have not used much, but with you help I will be using more often.

[@_MyInkieFingers]

Aww thanks! That means a lot as I was so upset over the poor audio. I'm so glad it helped you 😁❤️

[@helgahofmann6393]

Great demonstration of the Gemini Junior, I just purchased one was not sure if I was going to keep. I needed the info you provided for me to keep it, sure I will love it. Thank you very much.

[@lynnerourke4556]

This is my first time on your channel and l was very pleasantly surprised how easy your instructions were to follow. I just subscribed to your channel as well. I look forward now to binge watching your videos. Most appreciative as l now feel l will enjoy your channel very much.

[@_MyInkieFingers]

YAY! I'm so glad my channel appeals to you. Consider yourself my latest Inkie Friend! I'm live on Thursdays. That's always a good time. Maybe I'll see you there. If not I'll see you in the comments on other videos 😉 Stay safe ❤️

[@MaryBlocherthepowerhuffstamper]

I might have to get one of these. Thanks for sharing

[@bonnielarson6431]

I love the Gemini my family gave me to minimize hand strain from cranking my other machines! The small amount of noise it makes is ok with me! Jennifer’s efforts to help the die cutting community cope with the plates warping, breaking, and needing frequent replacing has helped tremendously. She did a more recent video, about using double sided die cutting plates too, you might want to check that one out. I always enjoy your videos, and your honesty makes me laugh!

[@_MyInkieFingers]

I will check it out for sure! Thanks for the heads up 😁😊💗

[@carolsiegle3254]

Thank You Inkie Finger's, was thinking of the Gemini from Amazon. Love what l see, not too noisy. Might just get the mini. Very impressed with how it cuts the small piece's out

[@_MyInkieFingers]

I'm very pleased with the machine. Might I suggest you carefully consider what you want from your machine? Remember it will be with you for years to come. I rarely use my mini die cutter and found I really just wasted money on it. If I have little things to die cut they can be easily cut on the larger (reg size) machine and I can also cut or emboss everything else I have on it too. I would just hate to see you later on regret buying the mini and wishing you had just invested in the reg size (junior). Sorry for the ramble, I just wanted to give you food for thought. Speaking of food... I hear a snack calling my name. See you later! 🤪🤣🤣❤️

[@audregaer3281]

I purchased my Gemini Jr when it was the TS on HSN several years ago. I had developed carpal tunnel and it saved my crafting life. Another hack to avoid plate bowing is to use a self healing mat in place of the plastic shim. I place my dies face down so they cut into the mat. The mat eventually gets bowed but they are very economical because I can get 4 from a 12 x 18 cutting mat purchased with a coupon from JoAnns. I enjoyed your video. TFS

[@sandrabiggs5692]

Another great review. Thanks for the info.

[@_MyInkieFingers]

You're welcome Sandra. Thanks for popping by 😁💗

[@shrierobinson6741]

My husband just bought me the Gemini Jr. as a gift. Your video has encouraged and enlightened me about the machine and plate. Oh yes, I love Jennifer Mcguire video too, Thanks.

[@_MyInkieFingers]

YAY!! He's a keeper! lol 😁💗

[@inawertzberger2580]

Just received mine a few days ago and in process of setting up today. Parallel universe ... coincidence ... maybe!!!

[@debbierheault6552]

Thank you so much! I was thinking about purchasing this

[@_MyInkieFingers]

Well hopefully this helped you decide one way or the other 😊💗

[@thwestbrook5636]

It called for the plastic shim, which you didn’t put in. Thank you for this demonstration! Well done.

[@kathleenzuckerman5912]

Thanks for your honest opinions. I mostly embossed until recently and have been thinking about this machine. My wrists have been a aching a little lately.

[@_MyInkieFingers]

As winter draws closer my arthritis starts to get increasingly worse. I know exactly how you feel. I did notice a price drop on the machine again so you may find it's very well priced. You can check here: geni.us/B3mpNk (But I think Amazon may be a better deal depending on shipping at Scrapbook.com) 😉💗

[@suklinkner8684]

Very interesting, I'm wanting a Gemini Jr. I have the bigger one and I do like it for intricate dies. Great video.

[@_MyInkieFingers]

Thanks Su 😁💗

[@rosegriffin8001]

Great review/video!

[@_MyInkieFingers]

Thanks!

[@cardstockcollector]

Thank You!

[@debbiebaker7613]

I originally bought my Gemini Jr. and full size Gemini because of my arthritis. Love love love the way the machine cuts.....so clean. I do still have a Spellbinders Platinum 6, but really prefer the Gemini machine..

[@_MyInkieFingers]

Well, we all know (or most of us know) who makes the Stampin' Up! machine (wink wink). Which is primarily the reason I love it so much. Spellbinders is a solid company that exercises great quality control to be sure the products in our hands are of the best quality and work as intended. But, with my pain the Gemini is a life saver! My only regret is not buying one a LONG time ago! 🤣🤣💗

[@debbiebaker7613]

@@_MyInkieFingers LOL. I not only have arthritis but my right shoulder is hurting so bad that I can barely life my arm,. So the Gemini comes in handy especially with all the Christmas card I will be making!

[@influentialolive]

I went big, and grabbed the large Gemini about a year ago. I haven't even opened it yet 😕... but, I've heard that the Jr plates fit sideways in the big one. My arting has suffered for a while- but- I'm coming back! Thank you for sharing. Jen McGuire is a Great Lady ... many happy makes to you

[@_MyInkieFingers]

Guuuuurl!! Bust that thing out and show it some love. I'm sorry you suffer, I know how you feel. So make that comeback a memorable one and bust that baby out! lol 😜🤣💗

[@debbiepiccolo7846]

Great video. I love my Gemini Junior. It is great if you have arthritis.

[@_MyInkieFingers]

I agree 😉👌💗

[@debclark6026]

I love my Gemini Jr.!! I had been sitting on the fence for about a year trying to decide if I was going to buy one. I was a bit concerned about how noisy it would be, as I often craft while my husband is snoozing. Then I heard you talk about getting a great deal on Amazon during your World Cardmaking Day video, so I paused the video (replay) and went straight to Amazon. The price was awesome so I bought it right then and there. And then I resumed the video. That was on a weekend, and the machine arrived later that week. I will still use a manual machine when hubby is snoozing, but I will get a lot of use out of the G.Jr. Thanks for the great tip!!

[@_MyInkieFingers]

It was just too good of a deal to pass up I agree. I too had hummed and haahed for about a year. So glad I got it! 😍💗 We can be Gemini Sista's now! lol

[@debclark6026]

❤️❤️❤️

[@whoooami2090]

Gemini is the best die cutting machine I’ve ever owned. I had dies that Zi had given up on cutting with my Big Shot or my Spellbinders Grand Calibur. One I tried them on the Gemini, I knew it was the only machine I will ever use. I kept my other machines because I have a couple Big .dies but rarely use them.

[@battymaria16]

I liked my Gemini JR so much that I bought the larger “big daddy” that will fit a full 8.5 x 11 sheet. You can use the jr plates sideways in the larger machine. Love it. I always use minimal shims and add as necessary when using other brand products.

[@_MyInkieFingers]

I considered that one! I was thinking about how many dies I could fit all in one pass... but I had to draw the line and budget myself! 🤣🤣💗

[@donnad8361]

Great review. I have a A4 couture creation go power and emboss electric machine and love it.

[@_MyInkieFingers]

Another machine I've never even heard of! lmao I feel like I live under a rock. But an INKIE rock of course! 🤣🤣

[@carolcaiazzo9180]

Thanks for this tutorial. I have a Gemini Midi and am thinking of upgrading to an electric one. Getting lots of ideas, not sure which one I would like to have as yet.

[@debbiedunham5204]

I absolutely love my Gemini Jr. Because it needs to be plugged in and I do not have an outlet by my crafting table, I do tend to use my Big Shot a lot of the time. I find any intricate dies like the ones you did are much better in the Gemini. Sometimes it's a a pain with the Big Shot to run things through more than once. Thanks for all the extra info! Hugs

[@_MyInkieFingers]

Urgh! That stinks. Did you happen to see the video I uploaded on my other channel. I'm soon solving my 'space' issue. tee hee 😁😁💗

[@debbiedunham5204]

@@_MyInkieFingers I just watched it! Exciting!!

[@_MyInkieFingers]

@@debbiedunham5204 Tee Hee I was just over there responding to comments. I see'd you boo 😜😊💗

[@craftysquirrel2958]

I would have said your flower die was an intricate die !? But that would have just been my thought 💭. Another great video, full of interesting information 👍🏼😁. Thanks for sharing.

[@_MyInkieFingers]

Oh yes, certainly an intricate die 😊💗 (EDIT: but being that the die isn't called an "Intricate or detailed" die I didn't want to misinform anyone)

[@marshaknatcal104]

I love the way the Gemini cuts the dies, but it will have to go on my wish list for awhile. I have a Big Shot and the Tonic Studios Tangerine. Both take a lot if effort to roll out the plates, but the Tangerine plates have not warped at all in the 3 years I've had it. Thanks for the demo!

[@_MyInkieFingers]

aaaaaaand the wishlist gets a little longer. Sorry, not sorry! lol 🤣🤣💗💗

[@andrewandberthapilgrim999]

I keep hearing good things about the Tangerine which iI understand is a metal die cutting machine. How does the Tangerine compare to the Big Shot?

[@_MyInkieFingers]

@@andrewandberthapilgrim999 I have no idea. I've never owned a big shot and have never heard of the Tangerine. 🤣🤪🤣 Saaawrie ❤️

[@valeriekosiba4227]

Thank you for this info

[@_MyInkieFingers]

You're welcome Valerie 😉💗

[@created2bless322]

I huff and puff so much with my manual die cutting machines. So much so that die cutting is labor-some for me 😭 The Gemini Jr. Sounds like bliss 🥰 I’m sold!!!

[@_MyInkieFingers]

But think of all the calories you're burning! See! Now you can tell people stamping is good for your health too! 🤣🤣🤣💗

[@created2bless322]

@@_MyInkieFingers seriously! I could say stress relief, like taking out my frustrations with it BUT it causes frustration at the same time soooo I am over it!

[@_MyInkieFingers]

@@created2bless322 🤣🤣🤣

[@joannequagliara6073]

Gre@t r3view.Thank you 👍❤️

[@_MyInkieFingers]

You're welcome Joanne 😁❤️

[@mmmmlllljohn]

Yes, I can definitely see the 3D embossing is slightly deeper with the Gemini. I’ll have to try taping the plates together. I told you that the Gemini cuts like butta! ❤️🇨🇦

[@_MyInkieFingers]

haha like butta for sure! 🤣😁💗

[@inawertzberger2580]

I’ve had an opportunity to run mine. The sound is not quite that loud …. Also will tape together a la Jennifer McG. It was my branching out to some old favorites (do you not love Carissa Wiley’s laugh?) pre SU, that introduced me to the Gemini last week. Thank you MIF!

[@crazyraspberry4176]

I’m so glad you reviewed this. I’m getting older and having a difficult time cranking the handle. It’s on my list to buy and I’ll be getting it off Amazon as well. I wish I picked this up instead of the Stampin Up Mini die cutter. I find it a real pain to use.

[@_MyInkieFingers]

I completely understand! In fact, I only use the MINI if I'm filming and don't really need a larger machine. It's a novelty item in my opinion while the Gemini is practical 😉💗

[@dawnstackhouse2086]

I think the Gemini came out with a mini also

[@_MyInkieFingers]

They sure did. I'm not sure why as it really limits what you can cut/emboss. Perhaps because of a lower price it may be appealing..? Not sure 😏💗

[@sharoncollier6900]

I love my Gemini jr. I use a sizzix precision plate and 2 sizzix clear plates. I taped a clear plate to the printed side of the precision plate so I can cut into the chrome side. I use this sandwich with another sizzix plate. I have been using it for almost 2 years and have never replaced a plate. Of course this will void your warranty 😀

[@_MyInkieFingers]

What will? I didn't hear or read anything! Mums the word 🤣🤣🤣

[@inawertzberger2580]

I successfully used one SU clear plate … for cutting. I believe it will work for embossing, perhaps with a shim as needed.

[@ginagibson8600]

Sadly I do not own this machine, but appreciate your review of it. I am thinking of investing in one though because I find that with my arthritis, carpal and neuropathy, using the manual machine is aggravating these problems. Thank you for sharing. 😊

[@_MyInkieFingers]

I completely understand! My hands are getting worse faster than I care to admit. I'll be even more thankful for this machine down the road. 😉❤️

[@Cravnlite]

You eyebrows are the bomb!

[@annajavier5712]

It’s funny I like the sound of the machine

[@_MyInkieFingers]

Tee hee ur weird! 🤣🤣🤣❤️❤️❤️

[@KraftyKc]

I first bought the Gemini used it maybe a handful of times. Decided on selling it and purchased the Gemini Jr. Have to say don't waste your money on the bigger one. It really sucks compared the the Jr. I LOVE the Gemini Jr .

[@weatherlywhitener2755]

I just watched your 2020 and 2021 videos on your top 10 products. (I also watched your video on why you left StampinUp). I love this video comparing the Gemini and the SU crank machine. That info and comparison was incredible. I do use a used dryer sheet(not my invention) to release the small pieces from intricate dies and the cardstock. It works really well, but the Gemini made me stop and think about getting one! Also, I am blown away by the Aleen's Tacky Spray for the dot to dot gluing of intricate dies. I am a boss at the dot to dot technique but it takes so much time. I thought spray would make my cardstock oily. Now I know differently. I learned so many things in a short amount of time with you. You are a genius with how you've worked with so many products and supplies and found the one that works the best for less money and showed us how and why. I so appreciate who you are in the crafting/cardmaking world. I don't make cards or craft for money, but I always look at videos to get ideas, and how to use products. The blender thingy's-oh my goodness. Genius. The explanation on how money is made with links, etc. was eye opening. I know I am all over the place with referencing several of your videos, but once I started watching why you left SU, I kept watching your other videos. I made lots of notes and can't wait to redo how I do techniques in my cardmaking. So, I thank you so very much for these videos!!! May you be successful, healthy and have joy in crafting and all things always.

[@kitkat6671]

I have the Gemini and the junior and I have the foil press. I Love the whole collection.

[@_MyInkieFingers]

I never got excited about the foil press. But then again, I haven't used one! lol I better steer clear or I may find myself 'adopting' one! lol 😁💗

[@kitkat6671]

@@_MyInkieFingers I used my foil press and made 150 Christmas cards last year with it. It is fun and addicting and you can foil either dies or diecuts.

[@_MyInkieFingers]

@@kitkat6671 that's a LOT of cards missy! Wow! 😨❤️😁

[@duffersqb]

Thank you

[@_MyInkieFingers]

My pleasure 😉❤️

[@alibush6757]

I think I’ll just crank on in the traditional way Cindy-Lynn. Good to see one in action though. Thanks for sharing 😘

[@_MyInkieFingers]

I hear ya Ali. It's spendy for someone who already has a machine 💗

[@alibush6757]

@@_MyInkieFingers I have both SU machines, a big shot (currently out on loan) and a big shot plus (for use with Bigz dies). I’d have to move into bigger premises to accommodate more equipment 🤣🤣

[@_MyInkieFingers]

@@alibush6757 haha I hear ya! Speaking of bigger spaces, did u see the video on my other channel today? 😉😉❤️

[@miekeschuller-denhaan6671]

I only make 3d projects and the biggest problem I have is the marks the dies make in the clear cutting plate, transferring onto my cardstock. This creates an awful look when you're for instance making a box. I remedy this by buying a cheap A3 cutting mat that I cut in half and replace when it starts marking my cardstock. The thickness is identical. Generally I find that the bigger the plates the more chance you have of them warping. I find that using the plates for the junior in the A4 machine or using my Gemini go as much as possible helps a lot. Thanks so much for your video on this!

[@jjellii1228]

I have both the Gemini and the Anna Griffin Empress. I prefer the Empress because it is quieter and the plates do t warp as quickly

[@kiwipommiegirl]

Thanks for your helpful video! I’m trying out my new Gemini Junior with the magic mat. It cuts & embossed great but the magic mat is already warped. Will keep trying with different plates to see if I can get it right.

[@_MyInkieFingers]

The magic mat warped in mine too. Saaaawrieee

[@lynnvomhof8328]

Hi, I read that you can use a heat gun/tool to heat up a warped Magic Mat, or other healing mat, and it will flatten back out again!! :)

[@cheryldavis2675]

Hi Cindy Lynn. Loving the review. Have you tried running a drier sheet over your dies before cutting/using? Total game changer.

[@_MyInkieFingers]

I've heard that before! I forgot about it. I'll have to try it for sure. Thx Miss Cheryl 😉❤️

[@bernicegoldman8737]

I always use a dryer sheet on my dies and your right it is a game changer and my craft room also smells great from the dryer sheets lol

[@rivamoyer1189]

Thanks for your review, I’m just getting ready to cut out a bunch of (at least 768 pieces) Concord & 9th tree boughs for my grandkids to assemble, and was thinking this might be the time to get the Gemini. Still thinking, but your input is very helpful, as always 😉

[@_MyInkieFingers]

That's a LOT of coloring Miss Riva!! WOW! 😨😜

[@debbiebaker7613]

People have also had really good success with the Anna Griffin Empress machine. Good luck with cutting sooooo many pieces!

[@annettelatham8688]

Don’t waste your money on this machine,it has cost me more in plates than I paid for the machine.Sent it back and got a replacement but still no better. This machine is brutal.

[@debbiebaker7613]

@@annettelatham8688 if you go to Jennifer McGuire’s KZbin, she explains how to tape the plates together that keeps them from cracking and bending. When I first bought mine I think I was buying plates every month. Now problem solved! Actually, in this video is the exact way Jennifer does it. Give it a try😃

[@_MyInkieFingers]

Only you know how you use your plates, your comment is very harsh and perhaps not really necessary. This is the first time you've ever posted on my channel and I think you could have been more graceful with your comment above and reply on this comment. $300 in plates? Seems like an exaggeration, which may or may not be an indication of how your machine really performed. 🤨 But let's go with benefit of the doubt here. There are so many reasons plates warp and the number one is not taking proper care of (and flipping) them. There isn't a machine in the world that will produce expected results if you don't do what's recommended by the manufacturer or even those have experience with the machine. I've tested this, as has Jennifer McGuire (for a year might I add) and I too have no issues with the plates or the machine. What you do with your plates and machine in your home is your business, but I suggest you try the DIY Sandwich and flipping them after each pass to prevent issues. Or other options that experienced people have found to be successful before you go barking in comments. The machine is amazing if used properly.🤨 Happy Stamping 😁💗

[@amydeleon3387]

I just got one & haven't used it much bc of the noise - I'm still hiding this purchase!! lol - but it does work great. Will invest in a brush tool.

[@_MyInkieFingers]

Or you could always say you've had it for 'a long time' and it must be getting loud coz its OLD! lmao 🤣🤣🤣

[@karenmunson4401]

Thanks for sharing. I have a mini sizzex machine, a Big Shot, and another electronic machine. I love them all for various reasons. But if I came across a Gemini Jr for a sale price, I would probably be the owner of that as well.

[@_MyInkieFingers]

Check Amazon as there it's a great deal right now! I linked my Amazon Shop. It has the one I bought in it (www.amazon.com/shop/myinkiefingers)

[@karenmunson4401]

@@_MyInkieFingers thanks! I think I know what the hubby will be getting me for Christmas or my birthday (Dec 21).

[@_MyInkieFingers]

@@karenmunson4401 I just had a realization. That's why you're so awesome. You're a Sagittarius too! ♐🤣😁❤️👍

[@karenmunson4401]

@@_MyInkieFingers yes, but just barely! Lol

[@heatherwoodcock3986]

I’ve been considering getting an electronic cutter due to arthritis. I think I’ll look into it.

[@_MyInkieFingers]

I updated the links with a link to my amazon store. I think you'll find them cheapest on amazon. Let me know if u find it cheaper elsewhere 😉 (with shipping)

[@heatherwoodcock3986]

@@_MyInkieFingers $161 with free shipping! Good deal. Just so happens my birthday is next week. Happy Birthday to me🎉🎂

[@_MyInkieFingers]

@@heatherwoodcock3986 yay! Happy Birthday, you'll love it! ❤️❤️❤️

[@juliez1539]

I agree totally with Jim Kern’s comment from 3 days ago. My EXPERIENCE, not an opinion but what actually happened with my Gemini Jr., was that the cutting plates did warp badly and immediately. I even changed to brand new plates and tried sandwiches that were suggested on KZbin instead of the sandwich I found in the machine’s instruction booklet, and the same thing happened. The dies that came with the machine could not even cut the card stock. I think that quality control on the machines must be really bad since so many people have had the same problem. I knew I was taking a chance in buying the machine after reading many reviews. I returned it and bought a much better electric die cutting machine.

[@_MyInkieFingers]

I would highly suggest the sandwich I taped up (I saw Jennifer do it) I've been using it for a month and a half with no issues. Apparently she has a new one too! So that's even more ideas 😉❤️

[@juliez1539]

I did try her sandwich, sadly with no success. I think that my machine just had too much pressure? One of Jennifer’s videos from this year on die cutting machines helped me find the new electric die cutting machine that I bought 6 months ago. I’ve used it almost daily since then. I love it so much that I even bought their mini die cutting machine so I can take it with me when I go to a friend’s house. I’m glad that you are so happy with your Gemini Jr! You got a good one! Having an electric machine is so helpful.

[@_MyInkieFingers]

@@juliez1539 I too am glad you found something you love 😊❤️

[@t.terrell7037]

What did you end up getting? Thanks!

[@juliez1539]

@@t.terrell7037 First off, I wanted to tell you that Gemini has new cutting plates that are supposed to be much better. The ones I’ve seen in KZbin videos are a very pale green, so I think they are the Gemini Jr. cutting plates for double-sided dies. They are advertised as thicker plates. I’m rather hesitant to tell you what I got. There is no guarantee that you will like it too! I also have noticed that the price has gone up a great deal since I bought mine. I got the Anna Griffin Empress Electronic die cutting embossing machine. I have not had to replace any of the plates or the shim or the magnetic plate. I also got plates for their mini machine so that I can put the plates in the machine sideways instead of lengthwise. I figured that might help keeping them from bowing if they tended to bow. I liked the machine so much that I got the mini machine too! I also use my Spellbinder’s Platinum 6 die cutting machine a lot.

[@charlenetull736]

Suggestion--spritz your paper with water before 3d embossing. Keeps your paper from cracking.

[@patriciabanks8314]

I think I must be the only person who really really doesn't like this machine, however, I will give her another try after seeing your video. I wasted so much money on the plates, etc that I gave up. Thank you!!

[@_MyInkieFingers]

Aww I'm sorry the machine frustrated you Patricia. I felt the same way about my Brother Scan n' Cut. Then I learned how we can play together in harmony! lol I hope you find a new appreciation for your machine 😊💗💗

[@michellewestwood6543]

Hi ya I'm gonna have the Genini die cutters Thursday a gift but do you have to use the die cutters only made from this as I have a collection which I use on my sizziks bigshot as I maynot have dies with it ?

[@pamelagentrybailey3355]

I don't get why people complain about the noise. I have this machine and love it The only one I currently have. Got rid of others I had

[@_MyInkieFingers]

I think some people are more tolerant than others. Neither is right or wrong, it's just personal opinion. I'm tolerant because I don't find it annoying and the benefits far outweigh the machine noise 😉😁❤️❤️

[@janetvyvyan5418]

I have the bigger Gemini and I must say I don’t like to have to put card on top of die. You cannot adjust the card and position due carefully on a piece of card to use up the spaces. Or to position a group of small dies to cut in one run through. Also the magnetic sheet warps dreadfully and then you can’t put the die down. For me I prefer the big shot.

[@_MyInkieFingers]

I didn't like how the dies and paper were to be placed either. As for your warping, try the DIY Sandwich I showed. I mean if you're rarely using the machine what do you have to lose? 😉💗

[@janetvyvyan5418]

@@_MyInkieFingers quite true. I have tried all the combinations to prevent warping even Jennifer Mcquires but they still warp much more than other machines. Yes I’ll stick to my mini cut and emboss from stamping up and my big shot with magnetic plate which I love. Thanks for your video though I really thought it was useful. X

[@_MyInkieFingers]

@@janetvyvyan5418 you do you 😉. It's you that has to do the die cutting in your house right?! 🤣🤣❤️

[@browniescrafts2066]

I have a Gemini also two other Gemini machine Junior and a Gemini Go. I have also tried the Mcquire technique. It's very good. I really need to sell my Junior and I have a Gemini Go as well they are are still in the original boxes. I would recommend the Gemini Mini as well I can manage to turn the handle on this as well and a lot of dies fit this machine. But couldn't I couldn't manage the Gemini Midi Handle turning it hurt my hands.. I love the Gemini a great machine. Thank you for the review😍

[@_MyInkieFingers]

You're welcome and thanks for the extra info on your feelings too 😉💗

[@marywagner9927]

I might buy your junior

[@browniescrafts2066]

@@marywagner9927 Hi Mary that would be great thank you. X

[@_MyInkieFingers]

@@marywagner9927 You can compare and see which one will be cheaper for you here: geni.us/B3mpNk 😁😊💗 Enjoy!

[@marywagner9927]

@@browniescrafts2066 how can we talk about this?

[@judyfrench7004]

Thanks for showing this Cindy Lynn. I am wondering to lift the Gemini Jr. how heavy is it? The same weight as the Stamp and Boss machine? I have back and neck problems and find it hard to crank the machines. This sounds like an answer for me.

[@_MyInkieFingers]

I have serious neck issues and I have no problem. I would say the weight of both machines are about the same. But once your Gemini has a home you won't really move it a lot 😉😁💗

[@janellperez447]

Hi I was watching you demo of the Gemini I’ve been wanting this machine can you tell me if I can use Tim Holtz Dies? I have a few of them that I really like and use please can you let me know thank you for your video it was helpful 😊

[@_MyInkieFingers]

I'm so sorry Janell, I do not have any Tim Holtz dies. But I can tell you what I "DO" know. Tim Holtz is partnered with Sizzix. Sizzix is who used to make Stampin' Up! Dies. I do know Sizzix dies work in the Gemini. You can use the link I'll paste below if you want to play it safe and buy it off Amazon (best price I can find as they include shipping with Prime - 30 Day Free trial: geni.us/HpQKr), as they have a return policy that will allow you to return it free if it 'does not preform as expected". However, I'm willing to bet you'll love the machine and ask yourself the same question I did, "Why did I wait so long to buy this"?!?!? lol (geni.us/B3mpNk) I hope this helps you out. Let me know if you end up with the machine 😉💗

[@shirleydesrochers3319]

Gemini’s are great but remember yours is brand new and will cut dies perfectly. As your machine ages you will be picking bits and bobs out. If you watch one of their videos they are picking them out. If I bought one it would be the gemini pro, it fits 12x12 size. Have a blessed day!

[@_MyInkieFingers]

My plate is so used and marked up it's insane but I'm still not having any bits stay in the die cut images. Guess I'm lucky, but not as lucky as you getting the BIG BOY Gemini one day! 😋😁🤗💗

[@andrewandberthapilgrim999]

Thanks for sharing. Jennifer McGuire has a newer sandwich.

[@_MyInkieFingers]

DOH! Really? I'll have to have a peeksie. Thx 😊💗

[@MaryBlocherthepowerhuffstamper]

I wonder if your well loved plates could also cause a rougher cut with the stampin' cut & emboss machine and not die cut as well.

[@_MyInkieFingers]

Very good point 😊💗

[@pami7597]

Love my full size gemini. Jr plates work sideways in it. But it really eats plates. Jennifer McGuire saved my honey by making me doubt their sandwich instructions...gotta play with it when using other companies dies. Other than that love it. Love my vagabond too.

[@_MyInkieFingers]

I don't have (currently lol) enough space for the big one. I wonder what I would ever need one for. Give me time, I'll think of a reason! 🤣🤣🤣

[@pami7597]

@@_MyInkieFingers I know you will your young yet! At my age...we go big or go home!!!!🤣😂🤣😂

[@anastasiapaggett3848]

I have a Gemini machine but I didn’t receive a booklet so that you for the combination

[@_MyInkieFingers]

Here's a link to the manuals: www.crafterscompanion.com/page/gemini-machines-downloads/ Happy downloading 😁💗

[@denaheck1506]

Wow. Great video Audio seemed fine. I guess I dont know what an intricate die is? Tome both those dies were intricate. Non intricate to me is circles, squares, etc. nothing fussy. If you locate an intricate die that I can look at to see the difference, can you give me name I’ll google it.

[@_MyInkieFingers]

I agree with you, but being that the die isn't called an "Intricate or detailed" die I didn't want to misinform anyone. 😉💗 The dies I used are linked in the description.

[@colleenhalpern4881]

I just watched another Jennifer McGuire Video-Fixing & Avoiding Warped Die Cutting Plates made 8/22. She has another new DIY sandwich using the plates made for the double sided dies. I haven't tried it yet, but it would be amazing! I am all about easy and the method looks easy. I hope you give it a try and let us know.

[@_MyInkieFingers]

If my current sandwich ever gives up I will, but it's still going strong 😍

[@nettieberkey8444]

So I would to know how you cut a stamped image on the Gemini? How would you line it up if you have to put the die in cut side up.

[@_MyInkieFingers]

Put it in like I do it 😁

[@neysabrooks680]

I run everything through my SU embossing machine 2xs on the dies. That way it comes out better. My machine needs different sandwiches for everything !. My paper maybe a different weight so need different sandwich. I cant use the directions from SU for sandwiches, because my machine must be too tight. The first machine had to go back because the machine was so tight, i couldnt use it....

[@ibelf2465]

I have a Big Shot & switched over to Gemini Jr due to difficulty with cranking at times. I do have the sidekick from Tim Holtz that I love for cutting those smaller pieces. Im wondering about the sign up for Stamping Up, could some of your product $ at sign up go towards one of the die cut machines?

[@_MyInkieFingers]

You can choose whatever you like when you sign up. You have (If in Canada) $165 to choose products with. What a deal that would be as it only costs $100 including shipping! All the details are here: bit.ly/2PANeIH Let me know if you become part of the Stampin' Up! Family 😁😊💗

[@wandahodges7311]

Even thou I have the Gemini jr I will always keep my cuttlebug! I still use it when the Gemini frustrates me

[@celiaalvarez4248]

Thank .. Im debating between the Gemini Jr and the empress from Ann griffin???? What is your opinion?

[@_MyInkieFingers]

I looked at that machine and while it's cute but I couldn't determine who actually makes the machine as Ann Griffin doesn't. Crafters Companion is a reliable brand so I went with them as I knew I was less likely to run into issues and if I did I had a solid company to back their product. Hopefully that makes sense 😏😊💗

[@celiaalvarez4248]

@@_MyInkieFingers Thank you for your thoughts.

[@marlareames2170]

I have the full size Gemini. I really wish I had gotten the Jr. to begin with. The big plates are a little tricky with the small dies. That is why I thinking about getting the Jr. plates and use it on the full size Gemini. Or should I just get the jr, too? I have the Stampin Up Mini Embossing machine, but with my old hands it isn't that easy to use. Plus the EF don't fit the little machine. Are there any thoughts on this? Please let me know.

[@_MyInkieFingers]

I have small dies and use them no problem with the Jr. size plates. I do however tape down every die I pass through the machine. That may solve the issue for you and costs a lot less than a new machine. I use this tape: --- geni.us/N0X8 --- If you don't think taping it will help and you truly want to try the Gemini Jr I suggest getting it from Amazon. As with the free shipping (with Prime Membership - 30 Day free Trial:geni.us/HpQKr) I feel like it's the least expensive option out there. Not to mention if you are not satisfied with the machine you can return it (free of charge - they pay the shipping) within 30 days. How can you go wrong? You can see the same one I showed with all the plates included here: --- geni.us/B3mpNk --- I hope I've been of some help Marla 😊💗

[@allaboutthatwifeandmomlife]

Can you stamp and then use the dies to cut out the stamped images too? Not just die cut alone?

[@_MyInkieFingers]

Yes you can use dies to cut out images 😊💗

[@dgmlmax]

I have a Gemini Jr. I don’t love it for several reasons, 1) the sandwiches are more complicated than I believe they need to be. 2) the plates are all sold separately, and are quite expensive and hard to find. Lastly, craft tools like this aren’t meant to be plugged in all the time, so it’s a bit of a pain to set it up and plug it in each time. I know most everyone keeps theirs plugged in but I think it’s a fire hazard for this as well as a heat gun.

[@_MyInkieFingers]

While there are specific combinations for the plates I solved that pretty easily and showed how Jennifer did hers and it works wonderfully with 2 plates. One for the top and one for the bottom I don't see them needing to be replaced for a very very long time. As for the price of the plates, that's really up to each person to decide if they find it expensive or not but they are readily available at Scrapbook.com. Now, as for you comments about devices being plugged in or not, was this information you 'heard' or got directly from the company? As it says nothing of the sort in the manual. We have to remember that a lot of people take things they read on the internet very seriously so it's always best to have solid facts when mentioning hazards as I would hate to have my viewers fear something that isn't really an issue. I'll contact Crafter's Companion to be sure there are no warnings published after the manual was printed. If there is actually a hazard warning I will update the description. 😉💗

[@dgmlmax]

The reason I mentioned are all just my opinions. I didn’t mean anything in a derogative way. I’m glad you like the machine. I know many others do as well. I did the taping of the plates as well. As for my fire concerns, they are again my concerns. I do know heat guns and even electronic die cutting machines have started house fires. For me I’d rather be cautious. Thanks for your very thorough comparison video.

[@_MyInkieFingers]

@@dgmlmax I didn't think you were being derogative 😉💗 But thanks for clarifying they are your personal concerns xo 💗

[@hatcha00]

Do you have a link for the brush?

[@_MyInkieFingers]

All the things I use are linked here for you 😉 kit.co/MyInkieFingers

[@Princess_karen]

Flip your plates every time you use them and put the information the opposite end of the plates, this will help with warping of the plates

[@robinmckenzie4142]

Use a spray bottle and lightly spray your card stock before you emboss with gemini jr. Also when you cut out with stamping up dies use wax paper in the background so the wax side faces the blade side and you will have better luck with those dies or any dies that seem a little dull.😉🤗❤

[@_MyInkieFingers]

Thanks for the tips Robin 😉❤️

[@GingerCapen]

Could the difference is pieces left, be due to one plate being new, and the other being well loved?

[@_MyInkieFingers]

Could be. But I've used new plates a lot and never noticed any issue with the cuts releasing. But anything is possible. 😊💗

[@sherrilang3278]

Jennifer McGuire has a video on how to flatten your warped plates.

[@_MyInkieFingers]

Yes, she does, I believe I mentioned it in the video 😉💗

[@sherrilang3278]

@@_MyInkieFingers oops. Missed that. Must be a bathroom break item!😀 Love your videos!

[@_MyInkieFingers]

@@sherrilang3278 haha! No worries. 😉

[@stamps4fungin]

I love mine but it's not convenient to use it a lot (being that it needs electricity). I seem to be using my little sidekick a lot, which hangs in a bag on my crafting chair.

[@_MyInkieFingers]

I guess I'm lucky that there's a plug behind the unit it sits on. I can see how not everyone has this convenience 😏💗

[@peggytesta1394]

Do you feel that once the Gemini gets well used that you will have the same problem with the tiny pieces not coming out as easily. It is very impressive, however, and will definitely take less time and effort. Do you feel that the higher price is worth it?

[@_MyInkieFingers]

I've had it since the first week of October. My plate is already well loved and I'm not having an issue with bits n' bobs'. Not like I have on my Stampin' Cut & Emboss. The only complaint I have it that If I want to die-cut something on an actual card (Like a circle window for example) the tape I put on the DIY Sandwich leaves an impression (where the tape is) if I don't use the side of the DIY Plate that has less tape coverage. So I'm mindful of how I place my cards as one side has much less tape so the card fits on the plate inside the tape folds. Hope that makes sense. And yes, for the price (which really isn't all that much more than the Stampin' Cut & Emboss I do think it's a great deal. You can see the price for your country here: geni.us/B3mpNk (I think Amazon would turn out to be a better deal if you live in the US) 😊💗

[@peggytesta1394]

@@_MyInkieFingersThank you so much, Cindy Lynn, you have been most helpful. I really think I’m going to invest. I was looking into replacing my current Sixxix machine that is big and bulky.

[@_MyInkieFingers]

@@peggytesta1394 I'm so pleased it helped you decide. I appreciate you using my link as well. Thank you 😊❤️

[@judydonnelly1456]

Are u in Canada ?

[@_MyInkieFingers]

I sure am. Are you? I'm in Alberta 😁❤️

[@triciawhislerable]

Hi 👋

[@_MyInkieFingers]

Hi Tricia 😁💗

[@triciawhislerable]

@@_MyInkieFingers hope your day is going well 😊

[@_MyInkieFingers]

@@triciawhislerable well it is now! Lol Thank you 😁❤️

[@triciawhislerable]

@@_MyInkieFingers you are welcome 😊

[@crewella100]

Why didn't you use the embossing mat?

[@_MyInkieFingers]

I didn't have one

[@PHamm54]

What is the tray use to brush the “bits& bobs” into?

[@_MyInkieFingers]

It's a little tray I found at the Dollar Tree. Not sure if they have them anymore but if you're in the US you can peek at what they have online: geni.us/RqF6Gm Good Luck 😉😊💗

[@shelleyhenry5766]

My biggest complaint with the Gemini is that the plates warp/tear so quickly.

[@_MyInkieFingers]

Try the sandwich. I've been going on the same sandwich I showed you since before the video posted (I filmed it before it went on KZbin) and I have barely any warping. I've also never had a plate 'tear' on me. 😉

[@PHamm54]

As a machine is used, there WILL BE “bits n bobs” left in the design cut due to general wear & tear.

[@_MyInkieFingers]

Very true & good point 😉💗

[@annajavier5712]

She has one that doesn’t use the magnetic shim.

[@_MyInkieFingers]

I heard she has a new one 🤔😉❤️

[@anntaft7808]

The more I use my Gemini JR machine, the less I like it! Tired of plates and shims warping! My machine did not work well with the substitute replacement mats. I am very disappointed!

[@_MyInkieFingers]

That's a shame. The sandwich I showed in the video is what I'm still using today. I literally just did 80+ passes for die cutting images for my Christmas cards and another consecutive 80 passes for embossed cardfronts (Christmas cards for my local grocery store) and my plates are still straight as a board. 😊❤️

[@jimkehn524]

I absolutely hate my Gemini. It is noisy and the plates warp almost immediately. I would not reccomend it. I went back to my crank machines.

[@_MyInkieFingers]

Everyone's entitled to their opinion and thoughts 😉. Maybe one day you will try the DIY Sandwich to prevent the warping. If not enjoy your other machine 😁💗

[@t.terrell7037]

Which one are you using now?

[@_MyInkieFingers]

The switch, but wish I had not sold my gemini. I'll be buying another in the future. I prefer it over the switch. I've had my switch replaced 3 times in 1 year.

[@darlenedewitt9901]

Not really a fair comparison since you're using a new machine and cutting plates against well used ones!

[@_MyInkieFingers]

That's a fair statement. My Gemini plate now looks like my Stampin' Up! Plate so I tested it again for you. Using the brush again, (very lightly might I add) using the flower die from Artistic Dies (as I did in the video) the die-cut came out with ease. There were 3 little tiny circles in the center. Far less than the many pieces still in the die with the SU machine, I didn't bother counting them as there was a considerable amount. The embossing is still the same result regardless of the condition of the plate so there's no need to test that again. So in conclusion, a very well-loved Gemini plate did not make a considerable amount of difference. But hey, thanks for pointing it out so I can refer to your comment in the future to let people know my findings 😉😁

[@annettelatham8688]

Don’t waste your money on this machine,it has cost me more in plates than I paid for the machine.Sent it back and got a replacement but no better,it is to brutal and the plates warp badly

[@_MyInkieFingers]

Only you know how you use your plates, your comment is very harsh and perhaps not really necessary. This is the first time you've ever posted on my channel and I think you could have been more graceful with your comment and reply on another comment. $300 in plates? Seems like an exaggeration, which may or may not be an indication of how your machine really performed. 🤨 But let's go with benefit of the doubt here. There are so many reasons plates warp and the number one is not taking proper care of (and flipping) them. There isn't a machine in the world that will produce expected results if you don't do what's recommended by the manufacturer or even those have experience with the machine. I've tested this, as has Jennifer McGuire (for a year might I add) and I too have no issues with the plates or the machine. What you do with your plates and machine in your home is your business, but I suggest you try the DIY Sandwich and flipping them after each pass to prevent issues. Or other options that experienced people have found to be successful before you go barking in comments. The machine is amazing if used properly.🤨 Happy Stamping 😁💗