No video

Gen2 Raptor Upper Ball Joints

  Рет қаралды 996

Ruff Wrench'n

Ruff Wrench'n

Күн бұрын

In this video I try to troubleshoot intermittent noise and vibration coming from my front suspension. I thought the noise was the integrated wheel end at first so I replaced the check valve and solenoid. The issue did not improve so I replaced the brake pads thinking that it could be uneven pad deposits on the rotor. The noise got worse after installing 37s and I planned to replace the wheel bearing when I found a bad ball joint. That’s when I decided to change the ball joint out since aftermarket and oem arms are way too expensive.
Upper Ball Joint
www.autozone.c...
Ball Joint Press Tool (RENT THIS)
www.autozone.c...
Ball Joint Master Set (RENT THIS)
www.autozone.c...
Ball Joint Ford Set (RENT THIS)
www.autozone.c...
Vacuum Pump (USE TO TEST IWE AND HOSES *cut off the large side of the 90 degree black rubber piece and use just the straight part over the large IWE barb)
www.harborfrei...
IWE Solenoid (7L1Z-9H465-B)
ford.oempartso...
IWE Check Valve (FL3Z-3A788-B)
ford.oempartso...

Пікірлер: 8
@johncolvin2234
@johncolvin2234 5 ай бұрын
Nice man, thanks for video. Just about to order the lowers and figured I would do uppers at the same time. Your video made it seem super easy.
@robmorissette8235
@robmorissette8235 7 ай бұрын
Ive been searching everywhere for the part number for just the balljoint, thank you!
@ruffwrenchn2235
@ruffwrenchn2235 7 ай бұрын
Glad I could help!
@johncolvin2234
@johncolvin2234 5 ай бұрын
@@ruffwrenchn2235 Any chance its the same for Gen 1 Raptors too? I don't wanna drop the shock to replace the entire control arm either.
@ruffwrenchn2235
@ruffwrenchn2235 5 ай бұрын
@@johncolvin2234 I'm honestly not sure. I just went to all of the auto parts stores online and cross referenced what each of them listed as the upper ball joint part for my truck. Then after buying the ball joints, I walked outside and tried to compare them before taking them home and swapping.
@Turtle_toys
@Turtle_toys 4 ай бұрын
How many miles do u have on this truck?
@ruffwrenchn2235
@ruffwrenchn2235 4 ай бұрын
@@Turtle_toys I did the ball joints at 50,043 miles
@mikimiki195
@mikimiki195 7 ай бұрын
I enjoy watching your videos One of the video I watch I still laugh when I remember time you did front differential cover and you drop bolt on your face 🤣🤣 You keep dropping F bombs 🤣🤣👍🏻
2014-2018 Chevy Silverado Lower Ball Joint Replacement How To DIY
18:02
Valley Mobile Automotive
Рет қаралды 115 М.
Идеально повторил? Хотите вторую часть?
00:13
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 17 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:40
CRAZY GREAPA
Рет қаралды 37 МЛН
IQ Level: 10000
00:10
Younes Zarou
Рет қаралды 13 МЛН
UNO!
00:18
БРУНО
Рет қаралды 4,5 МЛН
Gen 1 Raptor LCA reinforcement & Ball joint replacement
16:05
Keep It Dirty Off-Road
Рет қаралды 9 М.
Gen2 Raptor Wheel Bearing and Hub Replacement
7:22
Ruff Wrench'n
Рет қаралды 3,2 М.
Ford Iwe Diagnostic Aid & Replacement (Complete Guide)
12:42
Aaron Hines
Рет қаралды 90 М.
Jeep WJ - Episode 1: Wash and Talk
9:26
Ruff Wrench'n
Рет қаралды 1 М.
Chevy Silverado K2500 Upper & Lower Ball Joint Replacement
30:14
BSG Automotive
Рет қаралды 161 М.
Jeep Dana 30/44 Ball Joint Replacement
19:31
OutJeeping
Рет қаралды 120 М.
How to Check if a Ball Joint is Bad properly On a Ford Truck Or Any Car
6:58
Do NOT Buy Wheel Spacers || Watch First
8:15
TrailBuilt Off-Road
Рет қаралды 398 М.
Ford Quick Tips #57: Checking Ball Joints on Ford Trucks
4:08
FordTechMakuloco
Рет қаралды 163 М.
Gen2 Raptor Method Wheels and 37's
14:19
Ruff Wrench'n
Рет қаралды 9 М.
Идеально повторил? Хотите вторую часть?
00:13
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 17 МЛН