generator protection relay setting कैसे देखें |siprotech 7um62

[@surendrakverma555]

Very good. Thanks 🙏🙏🙏

[@electricalpowerplant]

👍🙏

[@daleshwarpatel4789]

Please explain generator thermal overload protection of Siemens siprotec relay

[@learnbyshiva725]

Pls share settings calculation video

[@electricalpowerplant]

Ok

[@electricalpowerplant]

Ok

[@learnbyshiva725]

Next video kab load karoge sir

[@electricalpowerplant]

Bus dear ab setting calculation vedio next wala aayga

[@learnbyshiva725]

Pls sir

[@daleshwarpatel4789]

What is I/Ino in differential protection

[@electricalpowerplant]

I = This typically represents the current in the system. Ino (or I₀): This denotes the zero-sequence current or neutral current in the system. The zero-sequence current is the sum of the phase currents in a three-phase system. In a perfectly balanced system with no faults, this sum should be zero. However, if there is an earth fault (a fault that causes current to flow to the ground), this current will be non-zero.

[@electricalpowerplant]

Ino relay is used to detect earth faults by monitoring the neutral (zero-sequence) current in the system. When this current exceeds a safe level, the relay activates to protect the system

[@haldharchouhan007]

Password bataye iska kya hota hai

[@electricalpowerplant]

Password ke liye compney के service eng. Se puchna hoga..... Waise 0000 hota hai ya 1111 depend on product. No

[@haldharchouhan007]

Siprotech 7um62 hai model