get the mist out. Condensation in Double Glazing, get the fog out

Re-Engineering failed double glazed units, Specialist Anti-Fog coating applied to the inside of the unit prevents moisture in the air condensing on the glass, also specialist sealer reseals the bottom of the unit to prevent water ingress from the bottom rebate should there be a problem with the window drainage or seals. No effect on the units thermal performance (tests carried out and verified by UK University).

[@rosskesava]

What tests and by what university? I would think it important to mention those simple few facts.

[@DinkAround]

Where could one get the equipment to do the same thing. Such as the pump and plugs used. Also what chemical is used in the windows. Thanks

[@enigma7070]

Since the window seal is broken allowing moisture to enter, wouldn't this be a temporary fix?

[@xjr328]

Hi, We allow air to flow through the unit exactly the same way cavity walls and floors are vented to stop the build of moisture, the anti-fog coating prevents any moisture forming on the glass.

[@gr8deals2do]

wow...

[@xjr328]

Both sheets are coated using the spray tip, Laminated glass can be drilled in the same way as annealed. more info at our website

[@tonyaulalo2040]

Why not just change the glass unit all together? Obviously isn't good if it's fogging up??

[@xjr328]

After the unit has been vented using our system the unit can never fog up again, installing a new unit with a life of less than eight years (Average) is only a temporary fix....... Why has the unit failed in the first place? Is installing a new unit going to fix the problem long term ?

[@Passionofthetaint]

Great help! Thanks! Who did this song?

[@xjr328]

Passionofthetaint Sorry don't know!

[@thepaulhowell]

+Passionofthetaint Song is Permafrost by Danosongs

[@MytradeTv]

Good guide. Thanks chaps.

[@xjr328]

Thermal Insulation testing. Wolverhampton University UK

[@alrewas5237]

My window has streak marks on the insides of the glass, presumably where moisture has dried. How can I clean this, before using your treatment? or would the treatment in itself clean it?

[@xjr328]

alrewas 52 Hi There is no way of removing white streaks. if the marks are clear in colour they normally come out.

[@margritelliott6190]

Many thanks for your good advice.

[@maz5148]

iIloved THIS! It makes COMPLETE sense! May be one of few KZbin DIYs that I didn't have to go back and repeat a few times...AND not ONE WORD spoken. So excited to contact you and get started on these windows! Love it! Thank You. I'll be in touch.

[@katkat676]

how much it will cost to have this procedure done?

[@xjr328]

Hi, We sell the kits and equipment to carry out the work yourself (DIY) kits start at £210 and repair 12 units, after buying the kit its just £5 per unit..

[@xjr328]

At our website getthemistout