Get Your Fidget On A Budget - 3DC Printings Fidget Sliders

I unbox and check out some awesome fidget sliders using magnets that are 3D printed by 3DCPrintings who have an Etsy shop. They wanted to make super affordable items that are still of high quality and design. Two brothers run the company. Check them out below:
Check out 3DCPrintings on Etsy for Affordable Fidget Sliders. Use Code Lefty20 for 20% Off your Order!: www.etsy.com/shop/3DCPrinting...
Check out my knife brand Divo Knives: divoknives.com/
Check out our Instagram: / divo_knives
Join this channel to get access to perks:
/ @leftyedc
Join the Patreon here : / leftyedc
Check out my Teespring Store: my-store-11205914.creator-spr...
Check out BigIdeaDesigns & use code LEFTYEDC for 10% off: bigidesign.com/leftyedc
Use code LeftyEDC for 10% off Skiff Bearings at: www.skiffmadeblades.com/colle...
Urban EDC Supply Affiliate Link: urbanedcsupply.com/?rfsn=5833...
Use code Lefty10 at checkout for 10% off your order at Knife Pivot Lube : knifepivotlube.com/?ref=i1si9...
Use code LeftyEDC for 15% off at Andar, or follow the link: andar.com/?mct=LEFTYEDC
Use code Lefty10 at checkout at White Mountain Knives for 10% Off your order and Free Shipping in the US : whitemountainknives.com
Use code Lefty10 at checkout for 10% Off your order at Asher Knife Co. : www.asherknives.com
Use code Lefty10 at checkout for 10% off at Axial Gear:www.axialgear.com/?rfsn=60741...
Use code Lefty10 for 10% off at: www.lancelotleather.com
Use code Lefty10 for 10% off at: www.etsy.com/shop/IssuingStit...

[@BolsteredBlades]

I love seeing you excited about something other than of course knives & your daughter! I think it's great hearing the excitement in your voice! Thanks for sharing all of these! 🙏🏻❤️👍🏻

[@develentsai3215]

The middle part has the lanyard get in the way, that's why you can not push upwards the middle one

[@iggy1397]

Nice to know there’s a budget alternative

[@inspire-mewealth5966]

This looks like it will work calming my anxiety for sure!!! Thank you for sharing these with us.

[@ronniestarkey8611]

Holy shit! "titanium fidget spinner" craze again, good luck goofs

[@FidelCashflow_YT]

Those look pretty great especially considering the pricing. The beads are a nice touch as well.

[@KG-tm1fe]

These are awesome especially for the price. Going to be ordering a couple of these.

[@pokitstuff]

Hello Lefty. I ordered the bar xl after watching your last live stream and used your code. Love the fidget content just as much as the knife content.

[@BluminatiNinja]

Those are really cool! I like that vector!

[@jeremyspaulding7735]

That's awesome! it's very cool to see a handmade budget option. Also very cool they're fans of the channel. Great video 👍

[@smartbearwtfx]

another great video Kev! big fan :)

[@toddcarr.]

These look awesome especially for the price. Also cool to shoutout a small business and for them to offer a discount code. Thanks for the look see and keep making sharp things fun and enjoyable

[@aaronbass3000]

the lanyard was keeping the middle layer from sliding up.

[@euFish]

seeing the etsy link relieves my soul because they are so cheap

[@jerseyknifeguy6382]

Lefty changed his channel to 3D’s figit pocket toys lol 😂

[@RyanPennington87]

Thanks kev. I bought the pro pack using your link.

[@RaiJK3]

Holy crap that knife is rad!

[@hectorgurts3425]

After a couple of days of seeing different sliders and options your review made me order 3😅. Thank u for the coupon code

[@LeftyEDC]

Hope u enjoy

[@whitekibaranger235]

this was EXACTLY what I was looking for! admittedly, I know nothing of these sliders but have been seeing them popup anytime I search for a fidget toy for my job, but all the sliders that are on KZbin are well over the 100 dollar range, as soon as I finished watching this video, I went and ordered a Frag of my own with 3 layers. can't wait to get this and start using it for myself 😁😁

[@LeftyEDC]

Awesome!

[@glassmw9823]

Yeah that $100+ nonsense is for the birds…

[@LeftyEDC]

@@glassmw9823 love that saying

[@glassmw9823]

@@LeftyEDC it’s a classic. Thanks for sharing these, I’ve been looking for something like this that doesn’t cost like $75-$200+…I’m on meetings for an hour+ multiple times a day and would like to have something to help focus my attention and doesn’t break the bank

[@1931Leatherworks_Terry]

i got one from them a while back and wasn't impressed with the quality for the price (the one i got was $25 shipped for a 1' square slider), but it looks like the quality has improved, so i think i'll give them another shot.

[@3DCprintings]

That sounds like our OG 1.0, from the early days, we’ve come a LONG way since then! Use code LEFTY20 and see for yourself! Thanks for supporting us in our early days!! Its because of you all that we’ve made it this far.

[@Cascade0ne]

Thank you Kev and 3DC.. just placed my order for the Glitch (Clicky)..

[@LeftyEDC]

Awesome

[@woodlandreconjoshdrakes5509]

I was checking these out on etsy

[@LeftyEDC]

They are a great start or trainer

[@A.Zander92]

Hey Kev, stupid observation here... was lanyard possibly getting in your way when trying to slide the middle layer or the Vector? Definitely gonna check these guys out. Beating the hell out of my Damned Designs Oasis Lite is a big reason I've yet to order a premium slider. The 3DC sliders definitely seem like something I can take to work and not worry about possibly ruining/losing...

[@LeftyEDC]

Yup lanyard. Im an idiot 😂

[@StupidGamingShorts]

Thanks to this video, I got my first fidget slider and I love it to death.

[@AlexeyPRG]

shipping plus taxes make it almost the same as original

[@Mid_Missouri_EDC]

Dam you Kevin…Just ordered a lunch tray.

[@LeftyEDC]

Good news it was like $12

[@LeftyEDC]

@Ember 13 when did you order it? What did you order? Whats your order number? I’ll get answers

[@dhoyan]

When you apply teflon tape on fidget items of 3DC Printing (both for clicky or silent versions), I promise that you will experience an even better haptic feel. Try it !

[@Thor7]

Do you know how to do the "clacker thing" with the 3dc Printed slider?

[@LeftyEDC]

Not sure what u mean

[@Thor7]

If you have the 3 piece slider, slide each piece to the last position, then start pressing the top down to where the two bottom pieces are flush and the top one has one space left.Now push on the top of the top piece with your thumb and push it down and then take your thumb off and it wiil click back and make a clacker sound.

[@LeftyEDC]

@@Thor7 oh. Yea ive done that. Thanks

[@elde667]

Silly, childish…..unsubscribed.

[@LeftyEDC]

Sad, upset….. moved on

[@BuffaloNickel9]

@@LeftyEDC haha exactly what ever will you do?.... until next month when he resubscribes and writes a nice comment because you just reviewed his favorite knife

[@Mid_Missouri_EDC]

Or have a giveaway.

[@CW_Filmz]

Mine are arriving tomorrow so exited after this vid!! you should put in a word for g10/micarta

[@3DCprintings]

Funny you say that, we’ve been wanting to buy the machinery to be able to mill and use Micarta for the inserts, keep watching our store, you never know…

[@gregvanderlip7726]

Great vid kev now I need the vector or frag and oreo coin 🪙 😀