Getting my long tube headers installed!!!

[@dameanbible1694]

Late comment but do the duel tips make it louder than a standard straight pipe or is it only for appearance

[@TurnThemWheels]

This is Kyle from the Groups NNBS 👍🏻

[@anthony378]

What kind of drop did your homie had with the 4.8? Love the truck btw 👍

[@jasonnnbs]

4/7 I believe bro and thank you sir👍🏽

[@tannerramer6450]

I can't wait

[@kevinthomas7707]

This Silverado sounds really good.

[@jasonnnbs]

Kevin Thomas thank you sir💪🏽

[@rubenalvarez7004]

Where did you get the hd hood bro ?

[@IdobReckon]

Okay 👀🔥🔥

[@jasonnnbs]

Yessir🥶

[@D_Cali_Life]

Hell yeah He spending money on upgrades rather than his front bumper dent lol

[@jasonnnbs]

Sleeper look 🤣

[@Mooka_Man]

What gears did you go with

[@rubensalais1502]

Where is the muffler shop located I need to I stall my headers and how much they charge you? By the way you truck sounds great

[@jasonnnbs]

Ruben Salais thank you 💪🏽 and its in Pasadena on jackson next to a audio shop and they charged me 250 the guy knows me and i bring him people

[@rubensalais1502]

@@jasonnnbs can I mention you if I take my truck there?

[@jasonnnbs]

Yessir😼

[@praiseallah6374]

Did you change your heads and valve springs and lifters and rocker arms.

[@jasonnnbs]

No

[@vallejo10videoproductions78]

Nice asf !!! What kind of exhaust do you have on it ?

[@jasonnnbs]

I had the carven but i switched to a magnaflow bullet

[@oscarsanchez9897]

@@jasonnnbs which one is on rn? It sounds badd🔥

[@jasonnnbs]

Kooks bullet muffler bro! Sounds good asf

[@therealstro26]

i just seen this video 2 years later but can you just tell me what exactly you did on it and what you told the muffler shop to do it on it pls and thank you

[@jasonnnbs]

Speed engineering headers and 3’inch all the way out. Back then i believe i had a Carven R muffler

[@MINAR3L_GR3Y_2V]

What kind of exhaust did the first guy in the video put on his truck?

[@jasonnnbs]

Corsa sport I believe

[@trevorcarroll5372]

So on the 5.3 does it have cats right after the manifold or are those just for the 02 sensor

[@jasonnnbs]

After the manifold

[@adrianls3976]

You welded the long tube to oem y pipe or you changed out the Y pipe?

[@jasonnnbs]

Custom y pipe

[@AustinSarver]

What was your previous set up before the headers? And did you get a tune after install?

[@jasonnnbs]

Has a magnaflow then went to a carven R then went to a magnaflow bullet

[@jasonnnbs]

Yessir

[@AustinSarver]

Jason NNBS ahh nice I got a 2013 Silverado with a third car delete and muffler delete to bullet, but I’m really contemplating on headers I wanna be louder

[@jasonnnbs]

You’ll immediately notice the difference once you slap them on bro

[@wesleybeeson1818]

Ok correct me here. You have 1&3/4 pacesetter into 3” catless mid into a 14” long by 4” round magnaflow? Just trying to do something similar.

[@jasonnnbs]

I got 1& 7/8 , no cats and 3 inch all around. Now i have the magnaflow bullet

[@wesleybeeson1818]

How long is the bullet? 6”?

[@jasonnnbs]

Yes I believe so

[@josemeza5872]

Did any of the bolts break? I want to change mine by myself but I’m scared of the bolts breaking so I’m debating if I should take it to a shop

[@jasonnnbs]

Yes, its better to take it to a muffler shop

[@josuecervantes5214]

Do u recommend getting a tune after installing the long tube headers?

[@jasonnnbs]

Yes, check engine light will come on

[@josuecervantes5214]

@@jasonnnbs ok what about the stock o2 do they work or need extended ones

[@elreyna2122]

where you get the hd hood moldings ??

[@jasonnnbs]

Part out lol 50$

[@backwoodsandbackwaters4503]

What year 2500 did you get hood off of

[@NoypiTexan]

What lowering kit you got I need those I got the same wheels

[@jasonnnbs]

Mark Tanteo its just dropped 3 inches front the back bro

[@juanresendiz1642]

How’s the ride after dropping the 3” in the back?

[@jasonnnbs]

Rides pretty good tbh but im going to a 5/7 drop

[@landonmartinez8943]

Hey man what tips are you using I’ve been wanting some dual tips

[@jasonnnbs]

5 inch dual bro. Any muffler shop should have em

[@HoapiliKealoha]

What kind of longtube headers are those?

[@jasonnnbs]

Speed engineering 1 and 7/8s long tube headers

[@je820rry7]

What kind of headers you got installed Need my 07 sounding like that

[@jasonnnbs]

Speed engineering 1 and 7/8s long tune headers.

[@je820rry7]

Jason NNBS 👌

[@jasonnnbs]

@@je820rry7 right now I'm running a magna flow bullet muffler. sounds way better then the obnoxious carven

[@luisalfaro6445]

You tuned it after? If so around how much was it? Thinking of getting some headers but want to know around how much it'll cost me

[@jasonnnbs]

250 for a street tune bro. Depending on where You go get ready to spend around 700$

[@sekou777]

Can you use the super chips scanner for this vehicle to tune it?

[@jasonnnbs]

You can buy i personally don’t trust em. Custom tune for me is the way to go

[@5.3david17]

It shakes ? It must be cold throw your blanket over it and try agin

[@frankdatank7751]

What brand headers, any fitment issues?

[@jasonnnbs]

Speed engineering. Had em for about 3/4 years now and absolutely no issues

[@silverado_on_35s30]

Did they by pass your sensors or they did something different

[@jasonnnbs]

Bypassed the sensors

[@alexcarbajal6632]

Bro im thinking about adding long tubes on my 4.8 but im in cali and worried about state refs and shit 🤦‍♂️

[@BenDover-vp9eg]

i doubt you’ll get sate reffed in a truck depending where you live, my single cab had long tube headers, fully straight piped, full tint all around even windshield was 5% and i didn’t get pulled over once🤷🏽‍♂️ but it’s all up to you, i’m about to get another pair soon for my 2012 crew cab

[@BenDover-vp9eg]

and i’m from the bay area

[@alexcarbajal6632]

@@BenDover-vp9eg i stay in La took off the 3rd cat and sheesh

[@2flyyc926]

What long tube headers you get ?

[@jasonnnbs]

Speed engineering

[@linolopez9424]

Could you possibly get the shops address ? Can’t seem to find it

[@jasonnnbs]

It’s called evolution muffler

[@domonickguigon6893]

What type of headers were they

[@jasonnnbs]

I had pacesetter

[@isaisandoval4766]

I got a 4.8 Silverado too, do you need a tune after you install headers?

[@jasonnnbs]

Yes you do

[@isaisandoval4766]

@@jasonnnbs thanks for the reply usually get no answer

[@jasonnnbs]

No problem. Better get a tune as soon as you can bro. Its gonna run super rich

[@isaisandoval4766]

@@jasonnnbs for sure ready to see what it does

[@jasonnnbs]

Its gonna waist hella gas depending what rear gears you have bro so I recommend looking into getting your dif built with gears aswell

[@timsmatlak1547]

What size headers ?

[@jasonnnbs]

1 and 7/8s

[@drewhebert9503]

Where did you get the hood did you have to change the grill and bumper

[@jasonnnbs]

Drew Hebert hood and grill i got it off a part out. Hood and grill are simple bolt ons

[@adamortiz2504]

What all done to truck performance wise and what yours exhaust set up

[@jasonnnbs]

As of this moment. Headers , cai, built trans with a bigger stall (currently hurt lolz) built dif with 4.11s

[@adamortiz2504]

What exhaust did u have on it before u installed the headers ??

[@jasonnnbs]

Carven R muffler, as soon as i installed the headers it was wayyyy too loud

[@jorgesalazar3027]

What exhaust did you have when it was stock?

[@jasonnnbs]

JORGE SALAZAR first muffler i got was a magnaflow then 1 year later i got a carven R and since then I’ve been rocking the carven. Debating on getting a magnaflow again but the bullet muffer

[@mistasugafree]

5.3’s may not be the fastest or the most hp but they have to get the best sounding.

[@jasonnnbs]

My opinion is that people hype up the 5.3 so much that they forget that the 4.8s have balls too

[@faridgadimov5955]

@@jasonnnbs how about 6.2?

[@jasonnnbs]

Farid Gadimov I’ve heard 6.2 with a full exhaust and they sound mean as well. Currently debating on a 6.0 or 6.2

[@alexcarbajal6632]

@@jasonnnbs i have a 4.8 2012 1500 crew cab so far i put a K&N intake and outlaw exhaust idk if i should put headers or not 😂 has an aggressive sound to it but i want aggressive loud!

[@jasonnnbs]

Get long tubes and slap on a Magnaflow bullet muffler

[@pachecokevin5100]

What muffler did the blue truck had

[@jasonnnbs]

Pacheco Kevin corsa sport

[@compressionignition7315]

What muffler did you run on this truck

[@jasonnnbs]

Carven R

[@jakeb7321]

did you have to do any tuning to prevent it from going into limp home mode? cause i have same truck and plenty of people told me to get front o2’s tuned out

[@jasonnnbs]

My truck never went into limp Mode. It would just have a rough start then it’ll level itself out. Tuner deleted the check engine light.

[@alexcarbajal6632]

@@jasonnnbs what does limp mode mean?

[@jasonnnbs]

Truck not moving under its own power

[@evenguerra767]

Did your steering shaft rub on header

[@jasonnnbs]

No sir

[@s3rgio5.34]

How much did you pay for the headers?

[@jasonnnbs]

220$ bro

[@heartless892]

What brand headers ??

[@suavecitoproductions7441]

Ceeeeehh!!!

[@laloaguilera8645]

What exhaust is that truck running? @ 6:00

[@jasonnnbs]

Corsa sport

[@Cixtea]

Your cats maybe stopped up because my boss just had to change his due to the same issue

[@gordoontb3016]

Did u have to put thread locker on bolts or they’ll be fine like that.??

[@jasonnnbs]

They should be fine bro

[@joaquina6129]

Do you have problem whit the sensor ?

[@jasonnnbs]

No problems

[@gutylux6222]

4.8 right? Sounds nice.

[@gutylux6222]

Also was switching the gauge cluster plug and play? Or how did you do it?

[@jasonnnbs]

Thank you sir🙏🏽 and yessir basically

[@josetovar6005]

What's the whoel entire setup up Long tube headers and what els

[@jasonnnbs]

I had the carven R but i switched to a kooks bullet

[@gerardoescobedo2682]

What did the blue truck haved

[@jasonnnbs]

Gerardo Escobedo headers tune intake. Same setup as me

[@LeonardoRodriguez-tx8se]

Link to headers please?

[@jasonnnbs]

Speed engineerings website bro but i believe they’re on back order bro but you can check

[@jackeber]

Bet you its clogged Cats on the Ford giving you trouble

[@jasonnnbs]

And that was the problem lol

[@poppav3821]

Jason NNBS if the cats on the ford where acting up the one thing bout the cats of there are clogged just floor it it it will blow it out

[@dylancantu2411]

Can I use these without the y pipe? On my 08 Silverado 1500 4wd

[@jasonnnbs]

As open headers?

[@dylancantu2411]

Ima put the headers on myself and go to the muffler shop and let them finish the rest

[@jasonnnbs]

Yeah but its gonna be a custom Y pipe

[@dylancantu2411]

Ima just run straight pipe no y pipe no none

[@jasonnnbs]

Yeah that’s a no no lol. Youre gonna get annoyed

[@kingscurse2562]

What’s the drop on the 4.8 truck?

[@jasonnnbs]

Just a 3 inch drop bro in the rear

[@krgreenlaw85]

Why do they all have dents?

[@jasonnnbs]

The headers?

[@stevenpruneda9061]

Get some spark plugs you throwing blue smoke

[@jasonnnbs]

Gonna change em this month. Dont drive the truck around as much anymore.

[@jasoncook1085]

Say brother what's the address for your boy I live near h-town I want to go show your boy some love for my chevy sevordo

[@alextorrescaratachea]

4.8 🤭

[@triggas80]

What's wrong with the 4.8 ?

[@alextorrescaratachea]

@@triggas80 almost v6 🤭

[@triggas80]

They handle boost better. Also rev higher in the top end. Youd be surprised what you could do with a 4.8 tbh.

[@jasonnnbs]

I still gap 4.3s and 5.3s bubba😗

[@jasonnnbs]

Love surprising people with this 4.8🥴

[@52felix87]

Your oil cap is missing 🤦🏻‍♂️

[@jasonnnbs]

Its there wym lmao

[@patrickoshea9527]

$220 for headers lol good luck

[@jasonnnbs]

Speed engineering 🥱

[@jonathansandoval4413]

Get a tune by khp lol street tune

[@jasonnnbs]

Not gonna lie KHP is getting good at tuning but I’m not fully convinced yet

[@jonathansandoval4413]

Jason NNBS they do good I got a tune by them

[@Abbykeels]

So how does this pass Inspection

[@jasonnnbs]

Bryan Keels tuner deletes the code

[@faridgadimov5955]

@@jasonnnbs obd2 smog test pass? After tuning?

[@logiegandara4560]

Injectors