Getting Started with FPGA Design #4: Embedded C Application Basics in FPGAs
Рет қаралды 6,122
2 жыл бұрынWhitney Knitter of Knitronics gives a demonstration of HDL (hardware description language) basics that are used in the majority of designs: the D flip flop, D latch, logic gates, simple state machines, and instantiation.
Watch the other videos in the series!
Installing Xilinx Vivado/Vitis - • Getting Started with F...
Creating a Base Vivado Project for Digilent's Arty Z7 - • Getting Started with F...
Basic FPGA Design Flow - • Getting Started with F...
HDL Basics in FPGA Development - • Getting Started with F...
Get 20% OFF of the Arty Z7 used in this series with the coupon code KNITRONICS on Digilent's web store!
digilent.com/shop/arty-z7-zyn...
@EngineerAnandu Ай бұрын
Good
@GilmarBarbosaBr Жыл бұрын
Nice tutorial!
@saeidreza6736 2 жыл бұрын
Hello, Nice beginners tutorial, but in #3 video you explained how to create a block design with switches and LEDs. Here you explain a C-application project for printing a simple message on the previous platform. But you neither showed playing with buttons and LEDs on your actual board based on the previous video nor you explain what is the relationship between your project in #4 with what you did in #3!
@totoislearningcodes8790 Жыл бұрын
Good explanation, but the problem is this tutorial doesn't work with actual system. It caused the memory reading error... This might be out of date.
@el_witcher 2 жыл бұрын
Where are the other videos?
@alelondon23 2 жыл бұрын
kzbin.info/www/bejne/paOWqoytfN56pqM
@paulk6697 2 жыл бұрын
✔️ Promo-SM.
@Bangbabes-kg1mo 6 ай бұрын
Maybe you could make useful videos, such as showing how to get started with your products?
Digilent, Inc.
Рет қаралды 10 М.