Getting Started With the Multimatic 220 AC/DC

[@arnaudpretto8877]

this is my first welder machine i have no regret work very well and user friendly totally worth it

[@tonyinhbolero4815]

i'm thinking about get these one , for Mobile welding , what do you think ? thanks for infor tho

[@adamcooper2917]

This is definitely my dream welder.

[@jonmackey2321]

It's nice I just got one

[@brandonhernandez9260]

@@jonmackey2321 how you liking it so far

[@dustydinkleman7928]

Cant wait to buy one of these. Looks amazing and beginner freindly. Hopefully i can save up and have one by next year

[@tolietMANAGER124]

Just bought this welder 2 days ago and haven't stopped welding, already ran out of the mig wire that it came with and 2Lb of sticks 🤣🤣

[@jimheflin1446]

omg you're on a welding high.....nice!

[@hotlinedubai1235]

How much cost you?

[@tolietMANAGER124]

@@hotlinedubai1235 $3,000 USD

[@brandonhernandez9260]

Have you ran all 4 processes with it?

[@tolietMANAGER124]

@@brandonhernandez9260 I have!

[@richhagenchicago]

I just purchased this one. I am looking forward to using it.

[@MillerWelders]

That is great to hear! Let us know how you like it!

[@cummins90671]

I just bought mine and been running it hard and it’s only gotten hot once but I was burning rod after rod after rod and had the machine in direct sunlight in Florida July 2023

[@danielmelendez5552]

Por que ya no la venden en México?? me interesa una

[@tonyinhbolero4815]

i'm try to buy this one for my mobile welding business do you think it good ?

[@obsession4842]

Your gonna need a generator. Not sure if this type of welder is best for mobile welding.

[@tonyinhbolero4815]

@@obsession4842 thanks bruh

[@chuckhill3383]

We have one of these machines in our shop and there is a problem with air entrained in the argon. The tungsten becomes contaminated within 20 seconds of welding and there are sparks coming out of the puddle. The weld is gray and rough. The fittings are tight on the regulator and the fitting going into the machine. The O-ring looks OK in the bottom of the DINSE connector socket. The fitting at the torch body is tight. The O-ring on the back cap looks OK. I haven't opened the case to look for the gas valve. Is there anything else I should look at before opening the case?

[@MillerWelders]

The most likely problem would be a hole in the gas line, I would try swapping to a different gas hose and verifying the issue still exists.

[@chuckhill3764]

@@MillerWelders Are you talking about the hose between the regulator and the fitting in the back of the machine or the hose between the DINSE connector and the torch body? Thanks!

[@morganweller1491]

I need this so bad sick of having all these welding machines Tig mig then I got one for flux core runs better on it this would make my job 100× easier

[@nicvanorton6795]

Want to see this compared to ESAB 205ic.

[@floridabeardedwoodworker]

go to bakers gas they have it

[@luisuranga9212]

What kind of warranty do you offer??

[@MillerWelders]

The Multimatic 220 AC/DC comes with a 3 year warranty

[@sk8salot88]

Can someone let me know if the machine can take a big spool of mig wire or onl 2lb spools?

[@MillerWelders]

Hi Kyle. Thanks for reaching out. The largest spool accepted by the Multimatic 220 is an 8 inch spool or 12 lb max.

[@calebc5166]

@@MillerWelders can you hook up a wire feeder for bigger spool of wire? And recently I saw a video on this machine where it was was hooked up to 110V and the weld parameters for the wire were adjustable between .030 and .035 wire, when hooked up to 220V can you adjust it for .045 wire? I realize you would have to change the drive rolls to .045 as well. Is that possible with this machine?

[@calebc5166]

@@MillerWelders Or could the "Multimatic 220" be used with the "ArcReach Suit Case 12" as a solution if you can't use larger size spools or .045 drive wheels in the 220?

[@rjpierson9847]

Will this Machine do Pulse tig?

[@MillerWelders]

Hi RJ, thank you for the question. Yes the Multimatic 220 AC/DC does DC pulse TIG. Thank you.

[@johnnywilson8532]

I was going to get this machine I named my favorite dog after Miller but I found out it can't run or not recommend for 6010 so I'm probably going with esab 205 since it can run the 6010

[@nfarc7542]

It unfortunately does not appear to offer pulsed AC Tig. Only DC. Literally the only thing keeping this from being the perfect machine for me.

[@anguianosboy]

I heard miller make also HOBART ,, so why multimatic 220 on stick Mode goes up to 90 amps in 110 volts While hobart multihandler 200 can reach the 100 amps on 110 volts .. 10 amps can make a big diferente welding 7018 ³/³²

[@jairogomezmarin928]

Precio en dólares saludos cordiales desde Cali Colombia 🇦🇲✌️ excelente

[@MillerWelders]

Hola Jairo. El precio sugerido por el fabricante para el modelo base del Multimatic 220 AC / DC es de $ 3,099.00 (EE. UU.). Para obtener más detalles y ver todas las opciones, puede visitar nuestro sitio web: www.millerwelds.com/equipment/welders/multiprocess/multimatic-220-ac-dc-multiprocess-welder-m30190#!/?product- opciones-título = multimatic-220-ac-dc-907757. También recomendamos consultar con su distribuidor local para obtener información y disponibilidad en su área: MillerWelds.com/wheretobuy. ¡Gracias!

[@dylanwilliams3347]

You been thunderstruck

[@nicholaskocher3895]

I have the multimatic 220 would you be able to tell me what size adapter I would need for the output side of the regulator I took that part off bc it does not fit my hose and I can’t find a adapter that fits the threads inside the regulator

[@mr.nobody68]

I notice the option to run Flux Core. Does that mean it can handle Dual Shield? I'll tell ya what would be the hot ticket: Offer the machine in a box with a ground clamp, and let me buy leads separately as needed. I need MIG right out of the gate, and TIG a little while later. Haven't touched any SMAW since before the Iraq invasion. Would also be really badass to invent a multi-process meshing that can also do Plasma Cutting. I would sell a kidney today to buy that! Oh I forgot Can you hook up a remote MIG box to this and run the big spools?

[@nfarc7542]

Does this machine do Pulsed AC Tig?

[@MillerWelders]

Thank you for reaching out! The Multimatic 220 does have the capability to do Pulsed TIG. For more information and to see all of the options: MillerWelds.com/equipment/welders/multiprocess/multimatic-220-ac-dc-multiprocess-welder-m30190#!/. Let us know if you have any additional questions.

[@stoneloan8912]

Hi brother how are you? How can I get one of these welders Is it available there in Australia?

[@MillerWelders]

Thank you for your interest in Miller welding products! To find a distributor near you, please use the following link: www.itwwelding.com/. If you have any further questions, please let us know. Thank you.

[@bigdadynickable]

With your advertisement I can really see myself buying this and using it but with your phrase of saying you can use this at home and the garage why aren't you saying you can use this on the job site ?

[@MillerWelders]

Hi Nick, thanks for your interest in Miller Welders. The Multimatic 220 can be used on jobs sites but is recommended more for hobbyists and smaller shops. For larger projects and job sites, we recommend the Multimatic 255.

[@bigdadynickable]

@@MillerWelders I have to ask why the 255 on larger projects and job sites

[@ahmedzuhair4474]

Good exercise 19/12/2021

[@weldingtips7827]

I REALY APRECITE U CAN HELP MI PLIS .🙏

[@weldingtips7827]

I got a new gas cilinder but the gas dont came out ..? I CHECK MY GUN THAT IS FINE ..

[@MillerWelders]

Hi there, can you confirm for us what Miller machine you are referring to? We would like to look into this issue further for you. Thanks!

[@rafaeleledesma8136]

Ese es el video

[@eviljew8206]

My father-in-law bought this for my brother-in-law, but he was too stupid to use it and ended up in jail. Maybe He'll get out in 16 years.

[@Dav2Kink]

any welding processes BUT not FCAW-Gas Sounds like you need a firmware update

[@clevelandmortician3887]

Run flux core on manual adjusting mode...no?

[@Dav2Kink]

@@clevelandmortician3887 Maybe..., Not sure,... if it was a manual mode But whats the point of auto-set if it dose not cover fcaw-gas. especially since it can handle gasless-fcaw

[@clevelandmortician3887]

Oh...dual shield. Probably run on one of the mig settings w gas and adjust from there. I love setting up a machine and tricking it.

[@samuelatx2415]

I think all MIG (GMAW) can be converted to Floxcore (FCAW) with gaz. Simply to change the feed rollers for rollers with grooves and change the gun liner for a liner with teflon protection and buy the good gaz. Your supplier of Gas and welding products can give advise for this. But probably for this equipement you need to use manual adjust...

[@dandombrowski5790]

7

[@billjones6124]

No way would I pay that much for this welder! Get a separate tig and mig welder! Remember if anything goes out you have nothing until it returns!