Connecting a Split Second calibrator and setting up TunerPro to configure it.
Пікірлер: 34
@luciankristov64362 жыл бұрын
Wouldn't it have been more exciting if he actually explained what the files are and where to start.
@Splitsec3 жыл бұрын
We use TunerPro RT to program the AIC2 family of additional injector controllers. You can use it on the Nissan Maxima if you are going to modify the engine and run additional injectors. If you are looking to fine tune a lightly modified engine, one of our R4 based PSC1 products might be more appropriate.
@fireman6676711 ай бұрын
I have an OBD1 lt1 corvette can I use tuner pro to returned my co.puter without this calibrator
@markamarandos340811 ай бұрын
TunerPro can be used to tune obd1 ECUs. You can use it to alter the code in the PROM in the ECU. You can also do real time tuning with an emulator.@@fireman66767
@StatusFIX3 жыл бұрын
very impressive software , i am hopeful i can work it out for my uk spec car
@creepycrawler46905 жыл бұрын
They really need to do something to make easier for us older dummies.
@MrbadatHALOslayer5 жыл бұрын
Don't feel bad. I'm 24 and have no idea how to use this.
@averyhite1885 жыл бұрын
I’m 17 and have no clue what he is talking about I’m pretty sure it would be easier to convert to a carburetor
@jtteo67934 жыл бұрын
Get the aic1 and use R4 software. Soooooo much easier
@MrbadatHALOslayer4 жыл бұрын
@@jtteo6793 could you post a link to that?
@ebeaulieu8134 жыл бұрын
I tried this years ago and got no place. Recently have been trying again as in finally got it installed and viewed my BIN file. Absolutely cannot get it to recognize hardware? Decides what com ports it likes not what blue tooth or usb is in devices.UGH ? Hopefully this video has enough information that I finally get it. Been using TunerCat for my OBD1 tuning but wanted to try TunerPro.
@destineal2 жыл бұрын
So this is only for AIC2 and not PSC?
@catmogguy3 жыл бұрын
What chance do I have using this. not a lot I would think 😂
@asfsf66256 жыл бұрын
From where should i get xdf and bin..
@jurajlitvanyi54104 жыл бұрын
nefariousmotorsports.com/forum/ try find .xdf in this forum by entering your ECU number into search module .. if you dont know your ECU number you should connect diagnostic, there should be written this number or look on ECU if it is available to look, on the box there should be written the number of the ECU
@L1A16 жыл бұрын
Very helpful video. Thanks for posting!
@Fk8td3 жыл бұрын
for a new fk8 civic type r would the new r4 software be more user friendly?
@hassanabas15493 жыл бұрын
Can I tune a Nissan maxima 2004 3.0l that comes with vq30 on stock ecu using this program?
@alchampion3402 жыл бұрын
Is Tuner Pro apple friendly?
@Splitsec2 жыл бұрын
TunerPro RT runs on Windows only.
@ecuperformance9593 жыл бұрын
this can work with obd2 ?
@Alex-dn5hi2 жыл бұрын
What is a Calibrator
@Splitsec2 жыл бұрын
The TunerPro RT software is used to set up our AIC2 additional injector controller. It is used to calibrate the additional fuel required in boost.
@-g.k.43892 жыл бұрын
Will this work for a 1993 Buick regal 3100
@Splitsec2 жыл бұрын
I don't have direct experience with that application, but should be able to use it for either upstream or port injection.
@campuradukchanelilmutiadabatas4 жыл бұрын
how to get xdf file from honda ecu software
@ajlalnaseem86676 жыл бұрын
which definition file i choose for chevrolet exclusive 0.8 2005
@Splitsec6 жыл бұрын
Use v4.4.0
@Splitsec6 жыл бұрын
We have posted xdf, bin and adx files for the AIC2 at splitsec.com. You can find them under downloads. You are welcome to contact us by phone at 949-863-1359. You can also email me at mark@splitsec.com. We do have a Facebook page at facebook.com/splitsec.auto.
@asfsf66256 жыл бұрын
How can i contact u , do you have facebook
@jtteo67934 жыл бұрын
This is absolute crap compared to R4 software. Why would you guys go to this. R4 is stupid simple and worked flawlessly. Deff selling my aic2 and getting a 1