Getting THIS Microwave in an IMPOSSIBLE Opening

hey Gang! Today we're installing this microwave into this tiny cabinet space. It's really going to give this area a custom look and we're excited to show you how we get it done! Be sure to like and subscribe if you enjoy the video! Thanks for all the support and we'll see ya in the next one.
Support Stud Pack here!
studpack.com
PO Box: 7516 Bluebonnet Blvd # 439
Contact: [e-mail]

[@DaddyBeanDaddyBean]

Cutting the first end of the rail almost but not quite all the way through, to support it while you cut the other end... GENIUS. Applies to cutting out a section of virtually any rigid material, whether face frame, 2x4, pipe, etc. Brilliant. Thanks!

[@richardbennett22]

Love how you go the extra mile and the attention to detail, this turned out great. It would be very difficult to find a contractor around here that would take the time to do that. Great job!

[@devinm9245]

This is the perfect comment, been subscribed for a couple years now and it's been good for me. I grinned at the "sub-scribe-to-stud-pack" after the microwave chime that was smooth just wanted to add, thanks for cleaning up the Dude-speak Jordan. If you act like a professional (which you are already beyond proven) people will treat you as such.

[@mansfieldcarpentry805]

time is money gotta be a customer that compensates good work and you get good work.

[@briangallentine3810]

I want them for my contractors! You are consummate craftsman guys!

[@mrsyvonnenlee]

@@mansfieldcarpentry805 True! Additionally,When you work with integrity you are worth your weight in gold and can charge accordingly instead of compromising you integrity by not taking your time to do it right. It may mean you have less customers but that doesn’t equal less pay. You get what you pay for! Thank you for your contribution to the industry.

[@lowreztv]

I did something similar in my house... and I learned one thing !!!! order two or three of the same microwaves and put the other two in storage you will have a hard time finding the perfect microwave when that one dies

[@thomasdickson3622]

Another trick is to check the size on multiple microwaves at different stores (try HD, Walmart, Target, say) - and buy one that shares a size with various other brands - it's likely that size will still be available in the future.

[@Onlooker71]

Very professional and skilled. Homeowner is lucky to have someone paying attention to the details.

[@kamo7434]

Love Stud Pack! The best construction related channel for no nonsense, practical, straightforward, to the point information. Keep up the great work gang!

[@zakinster1]

0:05 « we’re gonna put this microwave inside that cabinet » I don’t see how that’s gonna work… 0:36 « we’re gonna try to save this narrow drawer » yeah no way that fits 16:40 okay never mind, you guys rock.

[@locoken]

LOL! Thanks for the laugh!

[@arthurbogue1834]

Amazing what a competent installer can do to save a cabinet and more importantly, keep things moving forward on the install. Excellent work!

[@RoseGreen]

I would put screen mesh on the vents. Critters love to get behind cabinets.

[@465maltbie]

I thought about that too Rose, but it wont stop them from getting inside from the gap around the microwave. Charles

[@TT-ik3kd]

If they keep the house clean shouldn’t be a problem

[@gdavidp]

@@TT-ik3kd Incorrect, I have a clean house. In Northern part of Amercas (Canada), they come in during the winter months and have been having a field day in my attic. From there, everywhere is free game. I have had a professional come in to exterminate but they are still finding ways in around the brick/soffits.

[@1juan167]

O yes I know that for a fact🤣🤓👍

[@needaman66]

They usually find their into the house from wall cavities and then into the kicks

[@MrRtc555]

I like that adjustable depth box. I didn’t know they existed!! Great work you are a pro

[@vinceagnes]

You guys are great!, real professionals! Retrofitting appliances in existing cabinetry is an art. Your installation looks like it was part of the original. I recently had to modify my refrigerator opening to accommodate a new unit. I used your techniques for the cut out. It was really effective. Thanks.

[@spartus56996]

You guys are true professionals, well done !!!!

[@borys444]

True professionals, love the work and quality that go into these videos. Cheers brothers!!

[@StudPack]

Thx Nicholas 👍👊

[@borys444]

@@StudPack 🤘

[@htownblue11]

Paul’s work is as clean as his new haircut! Great tip on keeping the paint from chipping and scoring the cut line. It’s impressive enough to be a skilled craftsman, it’s even more impressive to pass that skill on to the next man.

[@benjaminreinhardt259]

Your knowledge and quality of work are exceptional. I appreciate you passing your skill along to the next generation. I'll be binge watching your channel to get ideas for renovating our house. Thanks.

[@jorymills652]

You sir are a unicorn in your field. I love how you pulled that off with the drawer I didn't see how it was possible. It came put looking like it was factory made that way. Easily my favorite trades channel.

[@margaretbear]

Have watched a ton of your videos, and am always impressed, but something about this one puts you in a class that is truly special. Having done carpentry, tiling, building, etc., I am so impressed with the time, effort and precision you put into that drawer. You could just as easily have used the old drawer face as a false front and no one would have faulted you for it. You inspire me.

[@StudPack]

Thanks Margaret. Yes I was tempted to install a false front

[@ryang5441]

I see people who don’t like the design, and I sure see where they come from, but for a young and limber guy who only uses the microwave about once a week like me I like it!! Either way you sure are a master of your craft.

[@SolToSeedFarm]

Such great attention to detail on all of your projects, really enjoy watching you work through customization and your pride in workmanship.

[@smaug1234]

hate losing the drawer but with a small kitchen you gotta do what you gotta do to make it work. great lines.

[@gavinsnyman6052]

Yeah, drawers are more important than putting a microwave down if it were me

[@Ed-Acosta]

Always nice to watch y’all work your magic. My confidence level always build more and more watching you.

[@StudPack]

Thx Ed 👊👍

[@JDinkel]

Man, this turned our awesome! I love the creativity in, not only this video, but all of your videos! I have learned a ton. Thank you for teaching us.

[@seanm3636]

Just discovered this channel about a week ago and have already watched all the videos! I've always been interested in DIY and have learned so much while being extremely entertained. Thanks so much for what you both do, Paul and Jordan! Please keep it up!

[@StudPack]

Thx Sean 👍👊

[@heclas]

Beautiful work! Watching everything fit perfectly was so satisfying!

[@1246pop]

Leave one side of the mini draw with the paint on it and/or flip to have finished side up, you can then paint the underside of it. This is the difference between a very good job and absolute perfection, the mark of a truly professional job.

[@dannyspears514]

I loved making the small things with huge impacts happen for my customers. You two are the true remodelers to make things write on a job . I have since moved on to a construction management position but will always be a “remodeled” at heart . Great job .

[@stampede18ecs]

I would put mesh on the holes so no critters could get in the cabinet

[@johnknightiii1351]

Another great Stud Pack video. Can't wait for the next one!

[@kensherwin4544]

At 12:50: I just love my Pat Warner router bases. Those of us who got them while we could were really lucky. I'm glad to see you were among the lucky ones.

[@donhartfield]

Yeah, he went over a few episodes ago how he prides owning his books (all signed!) and mentioned Pat passed away a few years ago. Stud Pack brings tears to your eyes sometimes with their thoughtfulness in their craft.

[@dalesworld1308]

'Putting a microwave in a very inconvenient place where you have to squat to use it.' Alright then...

[@JKiler1]

Usually when I've seen under counter microwaves they've been bottom hinged. Much more convenient when they're at knee/thigh level.

[@robertmcdonald5277]

Right, I would never put a oven 2 feet of the floor.

[@empressche333]

Having had a microwave on a counter, over the range, and installed like this..this is truly the best place for a microwave. Easy to use, less chance of spilling hot stuff on yourself, and doesn’t take up valuable counter space. I will install microwaves in lowers forever.

[@dalesworld1308]

@@empressche333 On a counter at hand or arm height has been an issue for you? Really?

[@empressche333]

@@dalesworld1308 on the counter takes up all my counter space. Up above the range is awkward and tippy. So, yes, installed under the counter is, by far, the best option.

[@stevebabiak6997]

That microwave can probably shift from side to side, so you need some stops on the sides too to prevent that from happening.

[@PongoXBongo]

And mabe a little front catch to keep it from pulling out with the door handle.

[@Romezview]

I just repainted all of my cabinets in my kitchen remodel. I used a Graco True coat Vsp 360. Loved how it worked for a lower budget airless sprayer. The color I ended up with looks close to the Grey on these cabinets. Love watching all the small details you use to make things turn out great. Great custom job to make use of something that would have bee just air space.

[@eyewitness2434]

It's the little things that make the big difference. Great job!

[@dawapfactor5882]

Nice microwave set up for a little person

[@1packatak]

Someone in a wheelchair would love that. Or even a senior who can no longer reach above the stove.

[@dawapfactor5882]

@@1packatak that's true

[@MediumRareSteve]

This is fantastic. I gotta say, out of everything I've watched from this series so far, dont ask me why, I love this the most 😂

[@brianjc85]

Perfect timing. I have to cut a face frame down the middle this weekend and wasn't sure how I was going ton make it look neat. Nice job!

[@micahortega6041]

I love your show. The work you do. Both of you. The video edits and capture are great and clearly the construction is top notch. Also cool that you two are brought together by this whole KZbin experience. Pretty cool.

[@ncharles0333]

Nothing could convince me to put the microwave there.

[@ikkuranus]

It looks nice but as someone who is 6'5" no way in hell I'm bending over to cook stuff every day just to save a bit of counter space.

[@hanananah]

It's possible for me to spill hot soup on my face while taking it out of my microwave where it is above the stove, I'd take this setup over that 😂.

[@myopinion69420]

@@hanananah we just re did our kitchen and put it under the counter. in the old kitchen it was sitting on the bench and was such a waste of space (small kitchen) no real option for one in the wall cabinets and our oven is an under bench one, so no oven 'tower'. also did not like the idea of the mocrowave being at head height for the exact same reason you mentioned. it works well and we saved so much bench space with getting the mivrowave off it. seems to be the way a lot of houses are being built here (in Australia).

[@javiergalvan242]

I was a bit lost with what your dad wanted to do Jordan, I couldn't see it, but never second guess the pros. Great job and another great video guys. I really enjoy your video's, be safe and blessed and keep them coming !!!! :)

[@gabrielguerro8449]

Good morning to stud pack . Love the father son combo

[@r.f.1935]

Man! I wish I could work with you guys! All the knowledge I would learn. Great video.

[@ColleenRose722]

Thanks for all the inspiration. Absolutely love your videos. I want to get into renovating and remodeling as a GC, these videos are great. Super useful. Thanks!

[@StudPack]

Our pleasure Colleen 👍

[@rodneyhammon1793]

Wow!…that was custom cabinets 101…….man, you have more knowledge & experience, than you let us to believe. Very humble…thanks

[@ostaz007]

You guys are incredibly detail oriented, who ever hires you guys are lucky to have you!! AAA quality!!

[@steveross9706]

The new drawer is perfect for a couple of sheets of paper

[@johnlewis8362]

I always get great ideas and inspiration from Stud Pack, well-done guys!

[@makersmind]

Love the step by step instruction and detailing of the video ... awesome!!!

[@warren-e-dee2671]

I'll actually take this video with me forever. 1: I was today years old when I found out those holes on my wire stripper could be used to bend the wires around the posts (embarrassing). 2: the adjustable depth box (game changer for me) lol! 3: The remedies you used around the door microwave were really good!

[@Doodad2]

Adjustable depth outlet boxes! I never knew they existed! Brilliant! Thanks!

[@tomhorrigan5769]

Stud pack you guys are just PRO all the way! I learn something new from you with every video. You are easily the best out there. Wish I could shadow you for a week!!!

[@likearockcm]

Nice work! 2 years later resident calls Paul and wants a bigger microwave. Cue the eye roll.

[@fredschultz8267]

NOT a fan of microwaves inside cabinets, who want to bend over to use the microwave....

[@MaureenTheTemp]

Or asks it to be taken out and installed on the wall or something. The installation is beautiful but I think the homeowners are nuts for wanting it there.

[@toddjasper1]

This made me laugh: “Help us beat the algorithm so dad can get a real drill…” *proceeds to use $600 Festool track saw* 😂 Love your channel, keep up the good work!

[@gichiguy007]

LOL... I chuckled a bit when I saw that too. Nice video though.

[@networkcrasher]

FYI that track saw is freaking ancient

[@LogoBallers]

I thought the same thing and came here to comment just that

[@Ryan-re1rs]

@@networkcrasher yes, that is not even close to new.

[@antoniog9814]

Paul, your workmanship is top notch! I love how you solve problems and the end result is always so clean & polished. I'm just not sure about having a microwave so low, but that's just me.

[@MiniSodaDev]

I don't know why KZbin has been recommending me all your older videos, but I'm not complaining. Loving these older videos.

[@RealFifty]

Cool trick on a pull saw when you get it brand new grind off the teeth on the first half inch are so of the blade let you get a perfect start on the line every time

[@zakthompson6312]

That’s in interesting trick. Thanks for sharing. I really love when people share small tips like this. The type of tips that add up and might just make my work even a little more efficient or professional appearing.

[@jimsgalaxxy9342]

I removed a single oven out of a cabinet and rebuilt it for a double oven and made a drawer at the bottom using one of the doors exactly the way you did.

[@RolandHebert-m3v]

Great video! Thank you for not showing every screw you installed and hole you cut. Simple and to the point works best for me. I hate videos where guys talk about everything but the subject and show unnecessary detail. Thank you.

[@jfkr77]

Nice work with saving a spot for a drawer that’s craftsmanship

[@stephaniebrown6980]

This was great! I feel like I could do this after watching…I appreciate your craftsmanship and skill as well as the attention to detail! Great to see true professionals!

[@mbarrera25able]

This turned out beautiful! Love the cabinet. I need one just like this. You make this look so easy. This is my next project!!!! Thank you for all of the tips and step by step process. Glad i found you !

[@locoken]

That was nothing short of amazing. Love the ability to improvise and make something work that most would have just said, "Naw. That isn't possible. Sorry, Ma'am." Great job, Stud Pack! Love your videos!

[@MBSK-xw4ff]

I think that the depth and technology of the job is very good, I think it is the fruit of effort and passion, I am proud, I respect you, I hope you will succeed deeply in your heart

[@itzelmendez9350]

Awesome video! You're dad is very good at his job and makes it easy to follow along. "Alright Gang" lol I love that.

[@mikesayed25]

I love the out of the box thinking you do i have some of those sometimes but never end up looking as nice as yours. Keep doing the good stuff.

[@Mr572u]

You never cease to amaze me. I’m going to make that bumper tomorrow.

[@judmcfeters9054]

Hopefully you saved that cross member you cut out for the microwave. Rip it to the same 3/4ish height as the microwave shelf then attach it there and paint it to match.. That way you can no longer see the plywood AND the shelf has the same reveal depth as as all of the cross members (professional look) rather than raw plywood (diy’er look)

[@CitEnthusiast]

Need to make a new cross member, the original is now too short. But the concept is right on the mark. The cross member also needs to be just the thickness of the shelf, or slightly taller (to keep the microwave from sliding out forward). That finishes the plywood and won't take away space in the small drawer.

[@StudPack]

Plywood edge covered yesterday with some trim left over from cabinets. Man you guys see everything 😳👊🤣🤣

[@richb4099]

That was an excellent install. Came out perfect. Great job.

[@chrisformby3039]

Nice work, using that microwave will literally be a pain in the neck.👍

[@MaureenTheTemp]

Yeah, why do the homeowners want it there? It looks great, especially with such a skilled installation, but they'll be calling him a year later to take it out.

[@spencerwilton5831]

Maureen TheTemp How often do people actually use microwaves though? Genuine question! It seems as if Americans consider them absolutely essential items that are in use daily. Here in the U.K. we all have them, but at most they are used to reheat a few leftovers once in a blue moon or maybe zap some two minute packet rice if we are feeling lazy. I don't know anyone who couldn't live without one. Mine is in the utility room and I probably use it less than once a week.

[@MaureenTheTemp]

@@spencerwilton5831 I use mine all the time, great to steam vegetables, melt butter, heat water for tea, cook omelets (I have a plastic widget that makes a great omelet for one in the microwave.) And when I am lazy, to heat up frozen dinners. I also cold brew coffee, so I'll heat that up in the microwave as well. I can see why this placement would appeal to those who don't use their microwave every day, and the craftsmanship of the installation is really sharp. Not sure if my use is an American thing, though, or just a lazy and impatient person thing!

[@spencerwilton5831]

Maureen TheTemp An Englishman once made tea using water heated in a microwave. Rumour has it that if you pass by the Tower of London on a quiet night you can still hear his tortured screams. As for cooking omelettes in a microwave- I shudder at the thought! What's wrong with a small, non stick pan? More authentic, tastes better, just as quick and still only one item wash up! A microwave is nearly always a compromise for actual cooking.

[@moonpiespotlight4759]

@@spencerwilton5831 We use ours daily. While our kitchen was being remodeled, the microwave and air fryer were our only cooking options (not counting the outdoor grill). I think people have no problem with a floor mounted dishwasher but somehow a microwave sitting even higher is a problem? Ovens also sit low, so is that also a back breaker? I feel people are overreacting to the positioning.

[@FoardFow]

Oh, great, the Mice and Rats are going to love those built in passages !!

[@-AnyWho]

now to pray the microwave doesn't break cuz the next one will not be the same size ...

[@markarita3]

Nice job guys. Myself though, I would've built a new face with wider rails. Of course, that would be up to the owner. Nonetheless, awesome conversion!

[@Clintotron]

I would have tried to split the drawer face horizontally and take height out of the middle, keeping the rails the same. That will be the only drawer in that kitchen with different rail widths-even different from the vertical rails. Your attention to detail impresses. Keep it up.

[@markarita3]

@@Clintotron A single rail is about ¾ of the full "mini" drawer front height (look at the drawer to the right of it 16:06)...wouldn't work. The rails I probably would've built would've had maybe 1" of panel reveal. Hard to say without testing out different sizes. Nice Tele btw ;-)

[@Clintotron]

@@markarita3 Thanks for pointing that out. Depending on the pulls used (I can’t remember if they require pulls) I’d have just gone with a solid panel and recessed the base of the pull the 3/8” (or whatever) so they all have the same projection. It’s a partscaster I took on trade. I LOVE it. Wish I had access to it right now. 🤘🏼

[@no_handle_required]

Every time I see one of your videos, I wish somebody like you was in Florida.

[@cancelchannel3394]

Will be a great utensil drawer 👍😀

[@stevenbrowningsr1144]

Good place for double stick tape to install the drawer face on the drawer. Nice custom work!

[@Malyard]

I love the gratuitous plug @10:18 ... "subscribe to Stud Pack." You guys are the best!

[@StudPack]

Thx 👍👊

[@richg3411]

"All we gotta do..." Famous last words.

[@catsmeow5566]

My first thought, that has been mentioned by others, is that some sort of screen needs to be put over those holes to keep mice out. They will nest in the dishwasher insulation. Needs to be extra sturdy mesh and possibly have steel wool behind bc they will chew through metal screen mesh. I found that out the hard way with my pantry. I'm not very fond of the microwaves down low because I have a bad back. I prefer ones that are higher up, but not too high. My friend's kitchen has a microwave cabinet that is similar to a tank topper cabinet but the opening is large enough for a freestanding microwave to sit on. Freestanding microwaves usually need about 3" of space on the sides and back to vent properly.

[@melvinpoplar8003]

Love the air quotes on "All we have to do" ... lol

[@cancelchannel3394]

Adding HD Stainless steel mesh over vent holes, is a great idea, to prevent varmints from setting up camp behind microwave 😀

[@Catalyph]

dang. I was thinking to cut the center of the drawer face so the rails stay the same width, the glue the 2 halfs together.

[@victorramirez9200]

Nice! That’s a very good option too.

[@holzwerx]

You would want to cut off the top rail then trim the stiles and assuming you have a floating panel, trim that. A lot more involved… Depending upon the vertical dimension, it may not be worth it. I’d probably go with a solid drawer face.

[@danherron2884]

Yep! That would’ve been a better way to do it and keep the frames consistent.

[@djryan8944]

Yeah… no on that drawer

[@atogi82]

Really enjoy the content guys. Your explanation and instructions are always understandable. Which is an indicator of a true master tradesmen. Keep up the good work guys!

[@b.powell3480]

Great job!! That's a good tip ! Putting the chef Mike in the cabinet! Helping out a friend with his kitchen remodeling, but the 'contractor crew' thats doing the work are nowhere near as knowledgeable as you and your son, they aren't even detail oriented! I've been trying to make sure the 'crew' is doing the job right! So, again thanks again for your videos! God bless you and your family!

[@btimbyindy]

Very few are as detail oriented as stud pack.

[@iamamish]

Such insane attention to detail. I hope the homeowner is watching these.

[@henrylester4051]

Thank you so much, you won't believe how many contractors that don't have a clue about how to modify a microwave base cabinet to fit a microwave oven.

[@dncndan1]

Nice job, but cannoit believe anyone would want to lose a drawer and have to bend over to use it.

[@Yoursoul101]

Yeah. This is going to be one of those things that causes the kitchen to lose value. Immediately the next buyer will say "I'm going to have to pay someone to move that".

[@justinmm1988]

Not to mention not all directions use the same wattage of microwave when they write them up, so you have to play the guessing game...so that's even more bending down to see if its done or needs more time....and it seams to me like it would be awkward to grab food out of it! Looks ghetto as hell to me! And totally out of place!

[@richardp2267]

Same amount if bending for the dishwasher next to it. Been seeing a lot of installs in the island.

[@CaptnJack]

@@Yoursoul101 but if you want a microwave and dont have a better place for it, its great

[@dncndan1]

@@richardp2267 But you only have to empty the dishwasher once a week and you arent trying to hold hot plates and dishes when you do it. Makes no sense. Not what you call user friendly.

[@VinceCannavaII]

That track saw is why you have zero $ for drills 😎. Nice job on the videos. Keep it up.

[@DHClapp]

I think I would have removed the material from the middle of the drawer instead of the top and bottom. If you notice, all of the other cabinets and drawers have the same size frames, but different size panels. I know the panel would have ended up tiny, but I still think it would have ended up looking more consistent. You could still try it: use the larger drawer you aren't using, rip a bunch of material from the middle, and see if you like it better.

[@nonamuss9991]

You guys are basically the only “can-do” contractors left in the United States!

[@nivebmartinez5241]

These dudes are serious they don’t play no games when it comes to their work amazing job these gentlemen do

[@mansfieldcarpentry805]

Attention to detail is everything

[@Tkm112093evadell]

👏👏👏 well freakin done guys! Well planned, very well executed and it looks awesome! I always looking forward to these videos, keep it up👍

[@Binkley-rj6gf]

Great problem-solving and look.

[@luisamezcua1504]

Love how you solve that , look great I like the way you think, you guys make a great team 👍🏽🙏🇺🇸

[@arifwulf]

I just did one like this. I mounted 4 strut bolts to the bottom of microwave. Then tighten bolts to pieces of half strut upside down. After centering Micro on a wood shelf mark center line of both channels. Drill two pilot holes large enough for strut bolts add square washers. Slide micro with strut onto bolts and tighten the bolts from underneath after removing lower drawer to set final depth of micro. Allow it to protrude as much as the face of the lower drawer front. Then create a 3/4 plywood or hardwood template with a cutout of the microwave opening leaving a 1/8 all around. Make sure template also stays within the dimensions of your overlay of your fronts and drawers. Go to local laminate top place buy a remnant piece of brushed stainless steel sheet. Laminate the template with the sheet with contact cement. Route the inside and outside of the template. You now have a custom stainless trim. After filing edges or sanding use blue tape to cover the stainless. Use a matte black spray paint to finish inside and outside edges. If your brave or OCD rip edge banding out of the stainless alternatively to paint finished edges. Be careful. It's sharp. Wear glasses and gloves. Fraction of the price of the store bought trims. Fully customizable for any microwave or cabinet. I like your version, it works for what you had to work with. Many older people or those with shoulder issues like these mounts. A true drawer microwave is usually at least a thousand bucks. Unachievable for most folks. Good compromise 👍

[@FLYAGI]

When will someone pick you up for tv series? Great video again!

[@jesussilva7706]

Maaaaaan. You guys never disappoint. Good job guys!

[@deathdealer2915]

Saw stop and festool track saw but needs likes to get better drill 😂 love it. Great idea and will probably try it when i remodel my kitchen

[@davidmessersmith786]

Great work! I would suggest you get a new set of hole saws. It looks like the hole edges are burned a bit.

[@russofamerica]

You guys do great work, and I really dig the father-son team dynamic.

[@liaison66]

I just started watching your videos. I am really enjoying the knew tips and the comradery between you two. Keep it up!

[@austintownsend654]

Dudes a beast mad respect to him and his company!

[@StudPack]

Thank you Austin 👍👊